Publications



2930 documents

Articles dans une revue

  • S. Gillet, F.L. Taussé Kamdoum, N. Bedrici, S. Joannès, L. Laiarinandrasana. Cyclic creep strain rate criterion for short-fibre reinforced thermoplastics: Validation of creep and fatigue performance across a wide range of load ratios. International Journal of Fatigue, 2024, 183, pp.108257. ⟨10.1016/j.ijfatigue.2024.108257⟩. ⟨hal-04520530⟩
  • Floriane Gerony, Côme Thillaye Du Boullay, Laurence de Viguerie, Fabrice Gaslain, Bruno Lanson, et al.. Diving into micro-and macroscopic properties of eggtempera paint based on Sienna pigment. Applied Clay Science, 2024, 249, pp.107236. ⟨10.1016/j.clay.2023.107236⟩. ⟨hal-04443938⟩
  • Vikram Phalke, Samuel Forest, Hyung-Jun Chang, Tonya Rose, Arjen Roos. Dark energy in crystals: prediction of stored energy in polycrystalline aggregates. Journal of Materials Science, 2024, ⟨10.1007/s10853-024-09442-6⟩. ⟨hal-04476531⟩
  • F. Damay, S. Petit, D. Sheptyakov, C. Colin, E. Suard, et al.. Influence of Dy 3 + environment on magnetic anisotropy and magnetocaloric effect in Dy 3 B 2 C 3 O 12 ( B = In , Sc , Te ; C = Ga , Al , Li ) garnets. Physical Review B, 2024, 109 (1), pp.014419. ⟨10.1103/PhysRevB.109.014419⟩. ⟨hal-04433983⟩
  • Abdelhek Idir, Francesco Delloro, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine, et al.. Comparative Study of Corrosion Performance of LVOF-Sprayed Ni-Based Composite Coatings Produced Using Standard and Reducing Flame Spray Stoichiometry. Materials, 2024, 17 (2), pp.458. ⟨10.3390/ma17020458⟩. ⟨hal-04433594⟩
  • Maryse Gille, Fanny Mas, Jean-Christophe Ehrström, Dominique Daniel. Development of a plane strain tensile test to characterize the formability of 5xxx and 6xxx aluminium alloys. International Journal of Material Forming, 2024, 17 (9), ⟨10.1007/s12289-023-01805-9⟩. ⟨hal-04387379⟩
  • E. Mofakhami, L. Gervat, B. Fayolle, G. Miquelard-Garnier, Cristian Ovalle, et al.. Effect of fibre concentration on the mechanical properties of welded reinforced polypropylene. Composites Part B: Engineering, 2024, 269, pp.111111. ⟨10.1016/j.compositesb.2023.111111⟩. ⟨hal-04420214⟩
  • Hervé Nlandu-Mayamba, A. Taguet, Perrin Didier, Sébastien Joannès, Florence Delor-Jestin, et al.. Influence of surface treatments and addition of a reactive agent on the properties of PLA/flax and PLA/bamboo composites. Journal of Thermoplastic Composite Materials, In press, ⟨10.1177/08927057241231733⟩. ⟨hal-04460275⟩
  • Mouad Fergoug, Augustin Parret-Fréaud, Nicolas Feld, Basile Marchand, Samuel Forest. Hierarchical modeling of heterogeneous structures driven by a modeling error estimator. Computer Methods in Applied Mechanics and Engineering, 2024, 418 (Part B), pp.116529. ⟨10.1016/j.cma.2023.116529⟩. ⟨hal-04263893⟩
  • Mouad Fergoug, Augustin Parret-Fréaud, Nicolas Feld, Basile Marchand, Samuel Forest. Hierarchical modeling of heterogeneous structures driven by a modeling error estimator. Computer Methods in Applied Mechanics and Engineering, 2024, 418, pp.116529. ⟨10.1016/j.cma.2023.116529⟩. ⟨hal-04264165⟩
  • Baptiste Joste, Benoit Devincre, Riccardo Gatti, Henry Proudhon. Simulation of intragranular plastic deformation localization in FCC polycrystals by Discrete Dislocation Dynamics. Modelling and Simulation in Materials Science and Engineering, 2023, 31 (8), pp.085021. ⟨10.1088/1361-651X/ad02b0⟩. ⟨hal-04293392⟩
  • Hamza Boukraichi, Nissrine Akkari, Fabien Casenave, David Ryckelynck. A priori compression of convolutional neural networks for wave simulators. Engineering Applications of Artificial Intelligence, 2023, 126, pp.106973. ⟨10.1016/j.engappai.2023.106973⟩. ⟨hal-04191834⟩
  • Daniel Irmer, Charbel Moussa, Lisa Belkacemi, Mohamed Sennour, Alan Vaissière, et al.. Effect of cold rolling on nucleation, growth and coarsening of S-phase precipitates in Al- Cu- Mg alloy (AA2024): From heterogeneous nucleation to homogeneous spatial distribution. Journal of Alloys and Compounds, 2023, 963, pp.171162. ⟨10.1016/j.jallcom.2023.171162⟩. ⟨hal-04161006⟩
  • Nathan Odou, James Hermary, Cristian Ovalle, Lucien Laiarinandrasana. Dependence on strain rate of the glass and ductile-to-brittle transition temperatures of an ultra-high molecular weight polyethylene used at cryogenic temperature. Continuum Mechanics and Thermodynamics, 2023, ⟨10.1007/s00161-023-01261-5⟩. ⟨hal-04420174⟩
  • Cristian Ovalle, M. Broudin, L. Laiarinandrasana. Plane–strain condition in plane–strain grooved tensile (PSGT) specimens during traction and creep loading at room and high temperature. Strain, 2023, ⟨10.1111/str.12467⟩. ⟨hal-04420186⟩
  • Valentin Davaze, Sylvia Feld-Payet, Nicolas Vallino, Bertrand Langrand, Jacques Besson. A non-local approach for Reissner–Mindlin shell elements in dynamic simulations: Application with a Gurson model. Computer Methods in Applied Mechanics and Engineering, 2023, 415, pp.116142. ⟨10.1016/j.cma.2023.116142⟩. ⟨hal-04156769⟩
  • Laurent Aubanel, Francesco Delloro. Tribological behavior of steel-based composite coatings produced by cold spray. Surface and Coatings Technology, 2023, 470, pp.129815. ⟨10.1016/j.surfcoat.2023.129815⟩. ⟨hal-04433599⟩
  • Baptiste Py-Renaudie, Diogo Goncalves, Serge Pascal, Mohamed Sennour, Vladimir A. Esin, et al.. Effect of Welding Microstructure on Stress Relaxation Cracking Studied by Controlled Residual Stress Generation in a 316L(N) Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 2023, ⟨10.1007/s11661-023-07182-x⟩. ⟨hal-04236188⟩
  • Xiang Kong, Thilo F. Morgeneyer, Djamel Missoum-Benziane, Gilles Rousselier. A polycrystalline damage model applied to an anisotropic aluminum alloy 2198 under non-proportional load path changes. International Journal of Plasticity, 2023, 168, pp.103674. ⟨10.1016/j.ijplas.2023.103674⟩. ⟨hal-04152942⟩
  • Matthew Bono, Ahmed Zouari, T. Le Jolu, D. Le Boulch, H. Tabouret, et al.. Biaxial expansion due to compression experiments for measuring the failure strain of tubular samples. Strain, 2023, ⟨10.1111/str.12462⟩. ⟨hal-04195533⟩
  • Clotilde Richard, Bruno Bresson, Maxime Bès, Laura Schittecatte, Solène Le Roux, et al.. Mechanisms of damage and fracture of aramid fibers: Focus on the role of microfibril cooperativity in fracture toughness. Journal of Polymer Science, 2023, ⟨10.1002/pol.20230400⟩. ⟨hal-04209297⟩
  • Baptiste Girault, M. Limousin, David Gloaguen, L. van Belle, Pierre-Antoine Dubos, et al.. Residual Stress Gradient Built in X40CrMoVN16-2 Austenitic Steel Cube Manufactured by Laser Powder Bed Fusion. Metallurgical and Materials Transactions A, 2023, ⟨10.1007/s11661-023-07148-z⟩. ⟨hal-04190565⟩
  • Qi Huang, Yann Charles, Marc Maisonneuve, Cécilie Duhamel, Catherine Guerre, et al.. Experimental and numerical analysis of mechanical fields on cross-shaped specimens for stress corrosion cracking of cold-worked austenitic stainless steels exposed to primary environment. Journal of Nuclear Materials, 2023, 582, pp.154478. ⟨10.1016/j.jnucmat.2023.154478⟩. ⟨hal-04321632⟩
  • H. Chen, T. Couvant, A. Seyeux, Cecilie Duhamel, P. Marcus. The effect of elastic and plastic strain on surface and intergranular oxidation of alloy 600 in simulated PWR primary water. Corrosion Science, 2023, 221, pp.111346. ⟨10.1016/j.corsci.2023.111346⟩. ⟨hal-04321571⟩
  • Shengfei Wang, Vandad-Julien Rohani, Tongqi Ye, Paul Dupont, Sylvain Pagnon, et al.. Effect of K-promoter use in iron-based plasma-catalytic conversion of CO2 and CH4 into higher value products. Applied Catalysis A : General, 2023, 663, pp.119315. ⟨10.1016/j.apcata.2023.119315⟩. ⟨hal-04160993⟩
  • M. Le Falher, Siegfried Fouvry, Pierre Arnaud, Vincent Maurel, N. Antoni, et al.. Fretting-fatigue of shrink fit lug-bush assemblies: Interference-fit effect. Tribology International, 2023, 186, pp.108581. ⟨10.1016/j.triboint.2023.108581⟩. ⟨hal-04220410⟩
  • Arjun Kalkur Matpadi Raghavendra, Laurent Lacourt, Lionel Marcin, Vincent Maurel, Henry Proudhon. Generation of synthetic microstructures containing casting defects: a machine learning approach. Scientific Reports, 2023, 13 (1), pp.11852. ⟨10.1038/s41598-023-38719-0⟩. ⟨hal-04307940⟩
  • Dylan Chatelain, Alain Denoirjean, Vincent Guipont, Fabrice Rossignol, Nicolas Tessier-Doyen. Role of PEEK as Intermediate Layer in the Cold Spray of Hydroxyapatite Coating. Journal of Thermal Spray Technology, 2023, ⟨10.1007/s11666-023-01622-1⟩. ⟨hal-04182540⟩
  • Edouard de Sonis, Sylvain Dépinoy, Pierre-François Giroux, Hicham Maskrot, Pierre Wident, et al.. Microstructure – Toughness relationships in 316L stainless steel produced by laser powder bed fusion. Materials Science and Engineering: A, 2023, 877, pp.145179. ⟨10.1016/j.msea.2023.145179⟩. ⟨hal-04299196⟩
  • G. Noguere, S. Xu, L. Desgrange, J. Boucher, E. Bourasseau, et al.. Generation of thermal scattering laws with the CINEL code. EPJ Web of Conferences, 2023, 284, pp.17002. ⟨10.1051/epjconf/202328417002⟩. ⟨hal-04305121⟩
  • Samuel Forest, Alain Miranville. A Cahn–Hilliard Model Based on Microconcentrations. Mediterranean Journal of Mathematics, 2023, 20 (4), pp.223. ⟨10.1007/s00009-023-02430-1⟩. ⟨hal-04106941⟩
  • Dirk Steglich, Jacques Besson, Inken Reinke, Heike Helmholz, Monika Luczak, et al.. Strength and ductility loss of Magnesium-Gadolinium due to corrosion in physiological environment: Experiments and modeling. Journal of the mechanical behavior of biomedical materials, 2023, pp.105939. ⟨10.1016/j.jmbbm.2023.105939⟩. ⟨hal-04127977⟩
  • Yangyuanchen Liu, Susanne Claus, Pierre Kerfriden, Junqin Chen, Pei Zhong, et al.. Model-based simulations of pulsed laser ablation using an embedded finite element method. International Journal of Heat and Mass Transfer, 2023, 204, pp.123843. ⟨10.1016/j.ijheatmasstransfer.2022.123843⟩. ⟨hal-03955948⟩
  • Etienne Navarro, Thomas Cornelius, Henry Proudhon, Rahul Sahay, Ihor Radchenko, et al.. Shear loading of FCC/BCC Cu/Nb nanolaminates studied by in situ X-ray micro-diffraction. Microelectronic Engineering, 2023, 276, pp.111999. ⟨10.1016/j.mee.2023.111999⟩. ⟨hal-04123370⟩
  • Juba Amrioui, Myriam Duc, Alain Le Kouby, Jeanne-Sylvine Guedon, Lucile Saussaye, et al.. Characterization by image analysis of materials heterogeneities produced by the Deep Soil Mixing technique. Materials Today: Proceedings, 2023, ⟨10.1016/j.matpr.2023.03.720⟩. ⟨hal-04385930⟩
  • Julien Said, Siegfried Fouvry, Georges Cailletaud, Stéphanie Basseville, Marc Coulangeon, et al.. A global–local approach to predict the fretting-fatigue failure of clamped aluminum powerline conductors: From mono-contact crossed wires to full conductor vibrational tests. Engineering Failure Analysis, 2023, 146, pp.107073. ⟨10.1016/j.engfailanal.2023.107073⟩. ⟨hal-04220388⟩
  • Yaovi Armand Amouzou-Adoun, Mohamed Jebahi, Marc Fivel, Samuel Forest, Jean-Sébastien Lecomte, et al.. On elastic gaps in strain gradient plasticity: 3D discrete dislocation dynamics investigation. Acta Materialia, 2023, pp.118920. ⟨10.1016/j.actamat.2023.118920⟩. ⟨hal-04072375⟩
  • Xiang Kong, Jianqiang Chen, Yazid Madi, Djamel Missoum-Benziane, Jacques Besson, et al.. Plasticity and ductility of an anisotropic recrystallized AA2198 Al-Cu-Li alloy in T3 and T8 conditions during proportional and non-proportional loading paths: simulations and experiments. Journal of Theoretical, Computational and Applied Mechanics, 2023, pp.1-31. ⟨10.46298/jtcam.8913⟩. ⟨hal-03497233v3⟩
  • Eduardo Tomanik, Laurent Aubanel, Michael Bussas, Francesco Delloro, Thomas Lampke. Tribological Performance of a Composite Cold Spray for Coated Bores. Lubricants, 2023, 11 (3), pp.127. ⟨10.3390/lubricants11030127⟩. ⟨hal-04433598⟩
  • N. Guillermin, Jacques Besson, Alain Köster, L. Lacourt, Matthieu Mazière, et al.. Experimental and numerical analysis of the Portevin-Le Chatelier effect in a nickel-base superalloy for turbine disks application. International Journal of Solids and Structures, 2023, 264, pp.112076. ⟨10.1016/j.ijsolstr.2022.112076⟩. ⟨hal-03905088⟩
  • Ante Buljac, Xiang Kong, Lukas Helfen, François Hild, Thilo F. Morgeneyer. Shear loading dominated damage mechanisms and strain localization studied by in situ 3D laminography imaging and Digital Volume Correlation for AA2198-T8. Mechanics of Materials, 2023, 178, pp.104558. ⟨10.1016/j.mechmat.2023.104558⟩. ⟨hal-04211215⟩
  • Maïlie Roquart, Anna Kharlamova, Lukas Marcos Celada, Sophie Norvez, Renaud Nicolaÿ, et al.. PEG-Based Photo-Cross-Linked Networks with Adjustable Topologies and Mechanical Properties. Biomacromolecules, 2023, ⟨10.1021/acs.biomac.2c01265⟩. ⟨hal-04061787⟩
  • Vincent Maurel, Vincent Chiaruttini, Alain Köster, Djamel Missoum-Benziane. Fatigue crack growth under large scale yielding condition: a tool based on explicit crack growth. Journal of Theoretical, Computational and Applied Mechanics, 2023, pp.1-25. ⟨10.46298/jtcam.9296⟩. ⟨hal-03628416v3⟩
  • Leilei Chen, Haojie Lian, Yanming Xu, Shengze Li, Zhaowei Liu, et al.. Generalized isogeometric boundary element method for uncertainty analysis of time-harmonic wave propagation in infinite domains. Applied Mathematical Modelling, 2023, 114, pp.360-378. ⟨10.1016/j.apm.2022.09.030⟩. ⟨hal-03956520⟩
  • Richi Kumar, Jacques Besson, Andrew King, Anna Dahl, Thilo F. Morgeneyer. X-ray microtomography investigation of damage fields ahead of cracks in CT and SENT C-Mn steel samples. International Journal of Fracture, 2023, 239 (2), pp.233-254. ⟨10.1007/s10704-022-00674-8⟩. ⟨hal-03982116⟩
  • Di Li, Vandad-Julien Rohani, Aravind Parakkulam Ramaswamy, Mohamed Sennour, Frédéric Georgi, et al.. Orientating the plasma-catalytic conversion of CO2 and CH4 toward liquid products by using a composite catalytic bed. Applied Catalysis A : General, 2023, 650, pp.119015. ⟨10.1016/j.apcata.2022.119015⟩. ⟨hal-03937070⟩
  • Clement Ribart, Andrew King, Wolfgang Ludwig, Joao P C Bertoldo, Henry Proudhon. In situ synchrotron X-ray multimodal experiment to study polycrystal plasticity. Journal of Synchrotron Radiation, 2023, 30, pp.379 - 389. ⟨10.1107/S1600577522011705⟩. ⟨hal-04305405⟩
  • François Payan, Albert Issa, Jean-Marc Krafft, Yannick Millot, Thomas Onfroy, et al.. Controlling Magnesium Silicates Coprecipitation Conditions: A Tool to Tune Their Surface Acid–Base Reactivity. Catalysts, 2023, 13 (11), pp.1393. ⟨10.3390/catal13111393⟩. ⟨hal-04391661⟩
  • B. Rais, J. Garnier, E. Pons, B. Marini, Jacques Besson. Determination of the fracture toughness of a 9Cr ODS steel fuel cladding using the pin loading Tension test. Engineering Fracture Mechanics, 2023, pp.109499. ⟨10.1016/j.engfracmech.2023.109499⟩. ⟨hal-04165833⟩
  • Daniella Lopes Pinto, Amar El Ouazani Tuhami, Nikolay Osipov, Yazid Madi, Jacques Besson. Simulation of hydrogen embrittlement of steel using mixed nonlocal finite elements. European Journal of Mechanics - A/Solids, In press, pp.105116. ⟨10.1016/j.euromechsol.2023.105116⟩. ⟨hal-04187719⟩
  • Stéphanie Basseville, Djamel Missoum-Benziane, Georges Cailletaud. 3D finite element analysis of a two-surface wear model in fretting tests. Friction, 2023, 11 (12), pp.2278-2296. ⟨10.1007/s40544-022-0727-1⟩. ⟨hal-04229494⟩
  • J. C. Stinville, M. A. Charpagne, R. Maass, Henry Proudhon, W. Ludwig, et al.. Insights into Plastic Localization by Crystallographic Slip from Emerging Experimental and Numerical Approaches. Annual Review of Materials Research, 2023, 53, pp.275-317. ⟨10.1146/annurev-matsci-080921-102621⟩. ⟨hal-04305010⟩
  • Sebastian Schafer, François Willot, Mansoureh Norouzi Rad, Stephen T. Kelly, Dirk Enke, et al.. Intermittent in-situ high-resolution X-ray microscopy of 400-nm porous glass under uniaxial compression: study of pore changes and crack formation. Acta Materialia, 2023. ⟨hal-04385906⟩
  • Mohamed Abatour, Samuel Forest. Strain gradient plasticity based on saturating variables. European Journal of Mechanics - A/Solids, In press, pp.105016. ⟨10.1016/j.euromechsol.2023.105016⟩. ⟨hal-04253035⟩
  • Akinobu Shibata, Ivan Gutierrez-Urrutia, Akiko Nakamura, Kazuho Okada, Goro Miyamoto, et al.. Three-dimensional propagation behavior of hydrogen-related intergranular cracks in high-strength martensitic steel. International Journal of Hydrogen Energy, 2023, 48 (88), pp.34565-34574. ⟨10.1016/j.ijhydene.2023.05.211⟩. ⟨hal-04125563⟩
  • Mathias Hurst, Lukas Helfen, Thilo Morgeneyer, Heikki Suhonen, Ante Buljac, et al.. Hierarchically guided in situ nanolaminography for the visualisation of damage nucleation in alloy sheets. Scientific Reports, 2023, 13 (1), pp.1055. ⟨10.1038/s41598-022-27035-8⟩. ⟨hal-03950491⟩
  • Pierre Arnaud, Vincent Maurel, Siegfried Fouvry, J. Said, C. Yang, et al.. Fretting tests for cyclic plastic law identification: Application to a 1XXX aluminium crossed wire contact. Tribology International, 2023, 177, pp.107958. ⟨10.1016/j.triboint.2022.107958⟩. ⟨hal-03875052⟩
  • Nicolas Leost, Alain Köster, Djamel Missoum-Benziane, Matthieu Rambaudon, Laurent Cameriano, et al.. Full-field analysis of damage under complex thermomechanical loading. International Journal of Fatigue, 2023, pp.107513. ⟨10.1016/j.ijfatigue.2023.107513⟩. ⟨hal-03959369⟩
  • Lara Mahfouz, Basile Marchand, Vincent Guipont, Florent Coudon, Vincent Maurel. Driving forces in thermal barrier coatings blistering. Materialia, 2023, 28, pp.101728. ⟨10.1016/j.mtla.2023.101728⟩. ⟨hal-04004744⟩
  • Nuri Choi, Shabnam Taheriniya, Sangsun Yang, Vladimir A. Esin, Ji Hun Yu, et al.. “Non-equilibrium” grain boundaries in additively manufactured CoCrFeMnNi high-entropy alloy: Enhanced diffusion and strong segregation. Journal of Applied Physics, 2022, 132 (24), pp.245105. ⟨10.1063/5.0133144⟩. ⟨hal-03993763⟩
  • James Paul Rouse, Pierre Kerfriden, Maxime Hamadi. A probabilistic data assimilation framework to reconstruct finite element error fields from sparse error estimates: Application to sub‐modeling. International Journal for Numerical Methods in Engineering, 2022, 123 (23), pp.5826-5853. ⟨10.1002/nme.7090⟩. ⟨hal-03955941⟩
  • Mélanie Prost, Alain Köster, Djamel Missoum-Benziane, Sylvain Dépinoy, Lyliat Ferhat, et al.. Anisotropy in cyclic behavior and fatigue crack growth of IN718 processed by laser powder bed fusion. Additive Manufacturing, 2022, 61, pp.103301. ⟨10.1016/j.addma.2022.103301⟩. ⟨hal-03935142⟩
  • Edouard de Sonis, Sylvain Dépinoy, Pierre-François Giroux, Hicham Maskrot, Louis Lemarquis, et al.. Dependency of recrystallization kinetics on the solidification microstructure of 316 L stainless steel processed by laser powder bed fusion (LPBF). Materials Characterization, 2022, 194, pp.112370. ⟨10.1016/j.matchar.2022.112370⟩. ⟨hal-03811878⟩
  • Aurèle Goetz, Ali Riza Durmaz, Martin Müller, Akhil Thomas, Dominik Britz, et al.. Addressing materials’ microstructure diversity using transfer learning. npj Computational Materials, 2022, 8 (1), pp.27. ⟨10.1038/s41524-022-00703-z⟩. ⟨hal-03642883⟩
  • Sebastien Weiller, Francesco Delloro. A numerical study of pore formation mechanisms in aluminium cold spray coatings. Additive Manufacturing, 2022, 60, pp.103193. ⟨10.1016/j.addma.2022.103193⟩. ⟨hal-03834715⟩
  • Antoine Débarre, Aurélie Julian-Jankowiak, Michel Parlier, Yves Renollet, Guillaume Pujol, et al.. Effect of temperature on the mechanical behaviour of an oxide/oxide composite. Journal of the European Ceramic Society, 2022, 42 (15), pp.7149-7156. ⟨10.1016/j.jeurceramsoc.2022.08.002⟩. ⟨hal-03784696⟩
  • Sebastien Weiller, Francesco Delloro. A numerical study of pore formation mechanisms in aluminium cold spray coatings. Additive Manufacturing, 2022, 60, pp.103193. ⟨10.1016/j.addma.2022.103193⟩. ⟨hal-04433602⟩
  • Deyo Maeztu Redin, Julien Caroux, Pierre-Yves Rohan, Hélène Pillet, Alexia Cermolacce, et al.. A wear model to predict damage of reconstructed ACL. Journal of the mechanical behavior of biomedical materials, 2022, 136, pp.105426. ⟨10.1016/j.jmbbm.2022.105426⟩. ⟨hal-03970810⟩
  • Nissrine Akkari, Fabien Casenave, David Ryckelynck, Christian Rey. An updated Gappy-POD to capture non-parameterized geometrical variation in fluid dynamics problems. Advanced Modeling and Simulation in Engineering Sciences, 2022, 9 (1), pp.3. ⟨10.1186/s40323-022-00215-x⟩. ⟨hal-03697156⟩
  • Francesco Delloro, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine, Abderrahim Benabbas. Microstructure and Tribological Behaviour of NiWCrBSi Coating Produced by Flame Spraying. Fizika Metallov i Metallovedenie / Physics of Metals and Metallography, 2022, 123 (13), pp.1410-1418. ⟨10.1134/S0031918X22700028⟩. ⟨hal-04433601⟩
  • Mouad Fergoug, Augustin Parret-Fréaud, Nicolas Feld, Basile Marchand, Samuel Forest. Multiscale analysis of composite structures based on higher-order asymptotic homogenization with boundary layer correction. European Journal of Mechanics - A/Solids, 2022, 96, pp.104754. ⟨10.1016/j.euromechsol.2022.104754⟩. ⟨hal-03757097⟩
  • Emmanuel Richaud, Leticia Pires, Sébastien Roland, Laurianne Truffault, Lucien Laiarinandrasana, et al.. Thermal Degradation of Fluorosilicone Elastomers. Macromolecular Symposia, 2022, 405 (1), pp.2100220. ⟨10.1002/masy.202100220⟩. ⟨hal-03825121v2⟩
  • Laurane Finet, Loic Nazé, Vincent Maurel, Vladimir A. Esin. In Situ Study of Temperature Stability and Precipitation Kinetics of δ and η Phases in Nickel Base Superalloys. Metallurgical and Materials Transactions A, 2022, 53 (10), pp.3627-3638. ⟨10.1007/s11661-022-06771-6⟩. ⟨hal-03815956⟩
  • Biswajit Dalai, Marie Anna Moretti, Paul Åkerström, Vladimir A. Esin, Lars-Erik Lindgren. Mechanical behavior and microstructure evolution during high strain rate deformation of AA7075-T651. SN Applied Sciences, 2022, 4 (10), pp.251. ⟨10.1007/s42452-022-05141-6⟩. ⟨hal-03815955⟩
  • Mohamed Jebahi, Samuel Forest. An alternative way to describe thermodynamically-consistent higher-order dissipation within strain gradient plasticity. Journal of the Mechanics and Physics of Solids, 2022, 170, pp.105103. ⟨10.1016/j.jmps.2022.105103⟩. ⟨hal-03821929⟩
  • Nissrine Akkari, Fabien Casenave, Elie Hachem, David Ryckelynck. A Bayesian Nonlinear Reduced Order Modeling Using Variational AutoEncoders. Fluids, 2022, 7 (10), pp.334. ⟨10.3390/fluids7100334⟩. ⟨hal-03853606⟩
  • Louis-Vincent Bouthier, Francesco Delloro, Elie Hachem. Application and assessment of the improved delayed detached eddy simulation model to the cold spray process: Toward high fidelity computation fluid dynamics simulations. Physics of Fluids, 2022, 34 (9), ⟨10.1063/5.0100954⟩. ⟨hal-04433604⟩
  • Sébastien Weiller, Francesco Delloro, François Willot, Alain Thorel, Michel Jeandin, et al.. Influence of Porosity on Ultra-High Vacuum Gas-Tightness in Cold-Sprayed Aluminum Coatings. Transport in Porous Media, 2022, 144 (2), pp.339-366. ⟨10.1007/s11242-022-01806-3⟩. ⟨hal-03834713⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Strain localization analysis in materials containing randomly distributed voids: Competition between extension and shear failure modes. Journal of the Mechanics and Physics of Solids, 2022, 166, pp.104933. ⟨10.1016/j.jmps.2022.104933⟩. ⟨hal-04023245⟩
  • Louis-Vincent Bouthier, Francesco Delloro, Elie Hachem. Application and assessment of the improved delayed detached eddy simulation model to the cold spray process: Toward high fidelity computation fluid dynamics simulations. Physics of Fluids, 2022, 34 (9), pp.095109. ⟨10.1063/5.0100954⟩. ⟨hal-03834714⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Strain localization analysis in materials containing randomly distributed voids: Competition between extension and shear failure modes. Journal of the Mechanics and Physics of Solids, 2022, 166, pp.104933. ⟨10.1016/j.jmps.2022.104933⟩. ⟨hal-03629342⟩
  • Andrew King, N. Guignot, P. Piault, L. Henry, Y. Le Godec, et al.. Advanced diffraction techniques on the PSICHE beamline, Synchrotron SOLEIL. Acta Crystallographica Section A : Foundations and Advances [2014-..], 2022, 78 (a2), pp.e802-e802. ⟨10.1107/S2053273322089896⟩. ⟨hal-04307928⟩
  • Sylvain Dépinoy. Influence of solidification conditions on chemical heterogeneities and dislocations patterning in additively manufactured 316L stainless steel. Materialia, 2022, 24, pp.101472. ⟨10.1016/j.mtla.2022.101472⟩. ⟨hal-03709672⟩
  • Estelle Palierse, Maïlie Roquart, Sophie Norvez, Laurent Corté. Coatings of hydroxyapatite–bioactive glass microparticles for adhesion to biological tissues. RSC Advances, 2022, 12 (33), pp.21079-21091. ⟨10.1039/d2ra02781j⟩. ⟨hal-03970817⟩
  • Dylan Chatelain, Alain Denoirjean, Vincent Guipont, Fabrice Rossignol, Nicolas Tessier-Doyen. Influence of the thermal treatment of a hydroxyapatite powder on the characteristics of coatings deposited by cold gas spraying. Surface and Coatings Technology, 2022, 446, pp.128697. ⟨10.1016/j.surfcoat.2022.128697⟩. ⟨hal-03871671⟩
  • Zacharie Shokeir, Jacques Besson, Chiraz Belhadj, Tom Petit, Yazid Madi. Edge tracing technique to study post‐necking behavior and failure in Al alloys and anisotropic plasticity in line pipe steels. Fatigue and Fracture of Engineering Materials and Structures, 2022, ⟨10.1111/ffe.13754⟩. ⟨hal-03691084⟩
  • Thomas Daniel, Fabien Casenave, Nissrine Akkari, Ali Ketata, David Ryckelynck. Physics-informed cluster analysis and a priori efficiency criterion for the construction of local reduced-order bases. Journal of Computational Physics, 2022, 458, pp.111120. ⟨10.1016/j.jcp.2022.111120⟩. ⟨hal-03853615⟩
  • Constance Chanh, Anaïs Gourment, Betrand Petit, Anne-Françoise Gourgues-Lorenzon. Experimental determination of 3D crack propagation scenario in resistance spot welds of a martensitic stainless steel. International Journal of Fracture, 2022, 235, pp.215-230. ⟨10.1007/s10704-022-00626-2⟩. ⟨hal-03614191⟩
  • Simon Garcin, Soha Baydoun, Pierre Arnaud, Siegfried Fouvry. Fretting wear modeling of 3D and 2D Hertzian contacts with a third-body layer using a Winkler elastic foundation model. Tribology International, 2022, 170, pp.107493. ⟨10.1016/j.triboint.2022.107493⟩. ⟨hal-03739846⟩
  • Nicolas Jousset, Marine Gaumé, Florent Bridier, Julien Beaudet, Jean-Loup Heuzé, et al.. Effect of the Thermal History on Macrostructure and Microstructure Development in High-Strength Steel Welds. Metallurgical and Materials Transactions A, 2022, 53, pp.2561-2576. ⟨10.1007/s11661-022-06686-2⟩. ⟨hal-03649371⟩
  • Ahmed Chaieb, Nathanaël Mozzani, Antoine Ambard, Aurore Parrot, Alain Köster, et al.. Stress relieved Zircaloy-4 recovery and recrystallization during fast anisothermal transients. Journal of Nuclear Science and Technology, 2022, 59 (12), pp.1-9. ⟨10.1080/00223131.2022.2076750⟩. ⟨hal-04030267⟩
  • A. Aublet, M. Rambaudon, F. N’guyen, David Ryckelynck, C. Remacha, et al.. Mechanical Fatigue Testing Under Thermal Gradient and Manufacturing Variabilities in Nickel-Based Superalloy Parts with Air-Cooling Holes. Experimental Mechanics, 2022, ⟨10.1007/s11340-022-00868-0⟩. ⟨hal-03689137⟩
  • Peng Yu, Stéphane P.A. Bordas, Pierre Kerfriden. Adaptive Isogeometric analysis for transient dynamics: Space–time refinement based on hierarchical a-posteriori error estimations. Computer Methods in Applied Mechanics and Engineering, 2022, 394, pp.114774. ⟨10.1016/j.cma.2022.114774⟩. ⟨hal-04023226⟩
  • L.T. Belkacemi, M. Vaidya, S. Sevlikar, A. Hassanpour, F. Jomard, et al.. Intrinsic heterogeneity of grain boundary states in ultrafine-grained Ni: A cross-scale study by SIMS and radiotracer analyses. Materialia, 2022, 22, pp.101397. ⟨10.1016/j.mtla.2022.101397⟩. ⟨hal-03815957⟩
  • Laury-Hann Brassart, Jacques Besson, Francesco Delloro, David Haboussa, Frédéric Delabrouille, et al.. Effect of Various Heat Treatments on the Microstructure of 316L Austenitic Stainless Steel Coatings Obtained by Cold Spray. Journal of Thermal Spray Technology, 2022, 31 (5), pp.1725-1746. ⟨10.1007/s11666-022-01402-3⟩. ⟨hal-03701332⟩
  • E. Mikaeili, Susanne Claus, Pierre Kerfriden. Concurrent multiscale analysis without meshing: Microscale representation with CutFEM and micro/macro model blending. Computer Methods in Applied Mechanics and Engineering, 2022, 393, pp.114807. ⟨10.1016/j.cma.2022.114807⟩. ⟨hal-04102146⟩
  • Anne-Cécile Bach, Frantz Martin, Cecilie Duhamel, Stéphane Perrin, François Jomard, et al.. Hydrogen trapping by irradiation-induced defects in 316 Lstainless steel: A combined experimental and modeling study. Journal of Nuclear Materials, 2022, 562, pp.153603. ⟨10.1016/j.jnucmat.2022.153603⟩. ⟨hal-03980437⟩
  • Camille Perier-Metz, Laurent Corté, Rachele Allena, Sara Checa. A 3D in Silico Multi-Tissue Evolution Model Highlights the Relevance of Local Strain Accumulation in Bone Fracture Remodeling. Frontiers in Bioengineering and Biotechnology, 2022, 10, ⟨10.3389/fbioe.2022.835094⟩. ⟨hal-03658445⟩
  • Raffaele Russo, Vikram Phalke, Didier Croizet, Mustapha Ziane, Samuel Forest, et al.. Regularization of shear banding and prediction of size effects in manufacturing operations: A micromorphic plasticity explicit scheme. International Journal of Material Forming, 2022, 15 (3), pp.21. ⟨10.1007/s12289-022-01657-9⟩. ⟨hal-03605920⟩
  • Vasilis Krokos, Viet Bui Xuan, Stéphane Bordas, Philippe Young, Pierre Kerfriden. A Bayesian multiscale CNN framework to predict local stress fields in structures with microscale features. Computational Mechanics, 2022, 69 (3), pp.733-766. ⟨10.1007/s00466-021-02112-3⟩. ⟨hal-03507497⟩
  • Kevin Pachuta, Halyna Volkova, Benjamin Hirt, Marie-Hélène Berger, Emily Pentzer, et al.. Liquid‐phase exfoliation method to access cobalt oxide nanosheets in pH‐neutral solutions. Journal of the American Ceramic Society, 2022, 105 (3), pp.1904-1912. ⟨10.1111/jace.18199⟩. ⟨hal-03616655⟩
  • Tatu Pinomaa, Matti Lindroos, Paul Jreidini, Matias Haapalehto, Kais Ammar, et al.. Multiscale analysis of crystalline defect formation in rapid solidification of pure aluminium and aluminium–copper alloys. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2022, 380 (2217), ⟨10.1098/rsta.2020.0319⟩. ⟨hal-03589996⟩
  • Vikram Phalke, Tobias Kaiser, Samuel Forest, J.M. Scherer. Modeling size effects in microwire torsion: A comparison between a Lagrange multiplier-based and a CurlF p gradient crystal plasticity model. European Journal of Mechanics - A/Solids, 2022, pp.104550. ⟨10.1016/j.euromechsol.2022.104550⟩. ⟨hal-03590189⟩
  • Flavien Ghiglione, Samuel Forest. On the torsion of isotropic elastoplastic Cosserat circular cylinders. Journal of Micromechanics and Molecular Physics, 2022, pp.1-14. ⟨10.1142/S2424913021420078⟩. ⟨hal-03589905⟩
  • Stéphane Gillet, Thomas Jacopin, Sébastien Joannès, Nacera Bedrici, Lucien Laiarinandrasana. Short-term creep and low cycle fatigue unified criterion for a hybridised composite material. International Journal of Fatigue, 2022, 155, pp.106571. ⟨10.1016/j.ijfatigue.2021.106571⟩. ⟨hal-03462858⟩
  • F. Tankoua, J. Crépin, P. Thibaux, S. Cooreman, Anne-Françoise Gourgues-Lorenzon. Contribution of the microtexture evolution induced by plastic deformation on the resistance of a hot-rolled pipeline steel to flat cleavage fracture and to brittle delamination cracking. International Journal of Fracture, 2022, 233 (2), pp.211-237. ⟨10.1007/s10704-022-00621-7⟩. ⟨hal-03065295⟩
  • N. Cliche, S. Ringeval, E. Georges, J. Bellus, P. Petit, et al.. Influence of the High-Temperature Mechanical Loading Mode on the Flow Behavior and Microstructural Evolution of a Nb-Stabilized Austenitic Stainless Steel. Metallurgical and Materials Transactions A, 2022, 53 (2), pp.610-626. ⟨10.1007/s11661-021-06536-7⟩. ⟨hal-03499953⟩
  • Jae Seon Baik, Sang Kim, Dae-Woong Jung, Weon-Sik Chae, Changhyun Pang, et al.. Colloidal Supraballs of Mesoporous Silica Nanoparticles as Bioresorbable Adhesives for Hydrogels. Chemistry of Materials, 2022, 34 (2), pp.584-593. ⟨10.1021/acs.chemmater.1c03072⟩. ⟨hal-03970822⟩
  • Vladislav A Yastrebov. La propagation des ondes à travers des milieux élastiquement asymétriques. Comptes Rendus. Mécanique, 2022, ⟨10.5802/crmeca.100⟩. ⟨hal-03874750⟩
  • Matti Lindroos, Jean-Michel Scherer, Samuel Forest, Anssi Laukkanen, Tom Andersson, et al.. Micromorphic crystal plasticity approach to damage regularization and size effects in martensitic steels. International Journal of Plasticity, 2022, 151, pp.103187. ⟨10.1016/j.ijplas.2021.103187⟩. ⟨hal-03589992⟩
  • Hamza Boukraichi, Nissrine Akkari, Fabien Casenave, David Ryckelynck. Uncertainty quantification in a mechanical submodel driven by a Wasserstein-GAN. IFAC-PapersOnLine, 2022, 55 (20), pp.469-474. ⟨10.1016/j.ifacol.2022.09.139⟩. ⟨hal-03853628⟩
  • Mohamed Abatour, Samuel Forest, Kais Ammar, Cristian Ovalle, Nikolay Osipov, et al.. Toward robust scalar-based gradient plasticity modeling and simulation at finite deformations. Acta Mechanica, 2022, 234, pp.911-958. ⟨10.1007/s00707-022-03411-3⟩. ⟨hal-03861605⟩
  • Thomas Daniel, Fabien Casenave, Nissrine Akkari, David Ryckelynck, Christian Rey. Uncertainty quantification for industrial design using dictionaries of reduced order models. Mechanics & Industry, 2022, 23 (3), ⟨10.1051/meca/2022001⟩. ⟨hal-03507112⟩
  • Matti Lindroos, Tatu Pinomaa, Kais Ammar, Anssi Laukkanen, Nikolas Provatas, et al.. Dislocation density in cellular rapid solidification using phase field modeling and crystal plasticity. International Journal of Plasticity, 2022, 148, pp.103139. ⟨10.1016/j.ijplas.2021.103139⟩. ⟨hal-03589985⟩
  • L. Lacoste, A. Sakly, Sylvain Dépinoy, S. Lebel, B. Vayre, et al.. Microstructure control of Additively manufactured IN718 By L-PBF process. Powder Metallurgy, 2022, 65 (5), pp.365-372. ⟨10.1080/00325899.2022.2069540⟩. ⟨hal-03811946⟩
  • Simon Le Berre, Isabelle Ramiere, Jules Fauque, David Ryckelynck. Condition number and clustering-based efficiency improvement of reduced-order solvers for contact problems using Lagrange multipliers. Mathematics , 2022, 10 (9), pp.1495. ⟨10.3390/math10091495⟩. ⟨cea-03714373⟩
  • Vikram Phalke, Samuel Forest, Hyung-Jun Chang, Arjen Roos. Adiabatic shear banding in FCC metallic single and poly-crystals using a micromorphic crystal plasticity approach. Mechanics of Materials, 2022, pp.104288. ⟨10.1016/j.mechmat.2022.104288⟩. ⟨hal-03627107⟩
  • Amar El Ouazani Tuham, Sylvia Feld-Payet, Stéphane Quilici, Nikolay Osipov, Jacques Besson. A two characteristic length nonlocal GTN model: application to cup-cone and slant fracture. Mechanics of Materials, 2022, 171, pp.104350. ⟨10.1016/j.mechmat.2022.104350⟩. ⟨hal-03496976v2⟩
  • Victor-Manuel Trejo-Navas, Ante Buljac, François Hild, Thilo F. Morgeneyer, Marc Bernacki, et al.. An examination of local strain fields evolution in ductile cast iron through micromechanical simulations based on 3D imaging. Journal of Theoretical, Computational and Applied Mechanics, 2022, pp.1-18. ⟨10.46298/jtcam.7501⟩. ⟨hal-03626799⟩
  • Youbin Chen, Eric Lorentz, Anna Dahl, Jacques Besson. Simulation of ductile tearing during a full size test using a non local Gurson-Tvergaard-Needleman (GTN) model. Engineering Fracture Mechanics, 2022, 261, pp.108226. ⟨10.1016/j.engfracmech.2021.108226⟩. ⟨hal-03799362⟩
  • Abdelhek Idir, Francesco Delloro, Rassim Younes, Mohand Amokrane Bradai, Abdelhamid Sadeddine, et al.. Microstructure analysis and mechanical characterisation of NiWCrBSi coatings produced by flame spraying. Metallurgical Research & Technology, 2022, 119 (4), pp.403. ⟨10.1051/metal/2022037⟩. ⟨hal-03834711⟩
  • Soha Baydoun, Pierre Arnaud, Siegfried Fouvry. Explicit formulations of adhesive wear extension in fretting interfaces applying the contact oxygenation concept. Wear, 2022, 488-489, pp.204147. ⟨10.1016/j.wear.2021.204147⟩. ⟨hal-03453452⟩
  • J.C. Stinville, W. Ludwig, P.G. Callahan, M.P. Echlin, V. Valle, et al.. Observation of bulk plasticity in a polycrystalline titanium alloy by diffraction contrast tomography and topotomography. Materials Characterization, 2022, 188, pp.111891. ⟨10.1016/j.matchar.2022.111891⟩. ⟨hal-03767562⟩
  • Akinobu Shibata, Ivan Gutierrez-Urrutia, Akiko Nakamura, Goro Miyamoto, Yazid Madi, et al.. Multi-scale three-dimensional analysis on local arrestability of intergranular crack in high-strength martensitic steel. Acta Materialia, 2022, 234, pp.118053. ⟨10.1016/j.actamat.2022.118053⟩. ⟨hal-03799344⟩
  • Mouad Fergoug, Augustin Parret-Fréaud, Nicolas Feld, Basile Marchand, Samuel Forest. A general boundary layer corrector for the asymptotic homogenization of elastic linear composite structures. Composite Structures, 2022, pp.115091. ⟨10.1016/j.compstruct.2021.115091⟩. ⟨hal-03531347⟩
  • Vladimir A. Esin, Marie François, Lisa Belkacemi, Daniel Irmer, Louise Briez, et al.. Effect of microstructure on fatigue crack deviation in AA2050-T84. Materials Science and Engineering: A, 2022, 858, pp.144120. ⟨10.1016/j.msea.2022.144120⟩. ⟨hal-03815959⟩
  • Akinobu Shibata, Ivan Gutierrez-Urrutia, Kazuho Okada, Goro Miyamoto, Yazid Madi, et al.. Relationship between mechanical response and microscopic crack propagation behavior of hydrogen-related intergranular fracture in as-quenched martensitic steel. Materials Science and Engineering: A, 2022, 831, pp.142288. ⟨10.1016/j.msea.2021.142288⟩. ⟨hal-03690737⟩
  • Thomas Lavigne, Arnaud Mazier, Antoine Perney, Stéphane Pierre Alain Bordas, François Hild, et al.. Digital Volume Correlation for Large Deformations of Soft Tissues: Pipeline and Proof of Concept for the application to Breast ex vivo Deformations. Journal of the mechanical behavior of biomedical materials, 2022, 136, pp.105490. ⟨10.1016/j.jmbbm.2022.105490⟩. ⟨hal-03792835⟩
  • Tom Petit, Claire Ritter, Jacques Besson, Thilo F. Morgeneyer. Effects of neutron irradiation and post-irradiation annealing on pop-in crack propagation instabilities in 6061 aluminium alloy. Journal of Nuclear Materials, 2022, 569, pp.153909. ⟨10.1016/j.jnucmat.2022.153909⟩. ⟨cea-03769978⟩
  • Anthony R Bunsell, Alain Thionnet. Quantifiable analysis of the failure of advanced carbon fibre composite structures leading to improved safety factors. Progress in Materials Science, 2022, 123, ⟨10.1016/j.pmatsci.2020.100753⟩. ⟨hal-03997818⟩
  • Xiang Kong, Lukas Helfen, Mathias Hurst, Daniel Hänschke, Djamel Missoum-Benziane, et al.. 3D in situ study of damage during a ‘shear to tension’ load path change in an aluminium alloy. Acta Materialia, 2022, 231, pp.117842. ⟨10.1016/j.actamat.2022.117842⟩. ⟨hal-03629627⟩
  • G. Trego, J.C. Brachet, V. Vandenberghe, L. Portier, L. Gélébart, et al.. Influence of grain size on the high-temperature creep behaviour of M5Framatome1 zirconium alloy under vacuum. Journal of Nuclear Materials, 2022, 560, pp.153503. ⟨10.1016/j.jnucmat.2021.153503⟩. ⟨hal-03517768⟩
  • Axel Aublet, Franck N'Guyen, Henry Proudhon, David Ryckelynck. Multimodal data augmentation for digital twining assisted by artificial intelligence in mechanics of materials. Frontiers in Materials, 2022, 9, pp.971816. ⟨10.3389/fmats.2022.971816⟩. ⟨hal-03815432⟩
  • Hugo Launay, David Ryckelynck, Laurent Lacourt, Jacques Besson, Arnaud Mondon, et al.. Deep multimodal autoencoder for crack criticality assessment. International Journal for Numerical Methods in Engineering, 2022, 123 (6), pp.1456-1480. ⟨10.1002/nme.6905⟩. ⟨hal-03510024⟩
  • Matthew Bonney, Richard Evans, James Rouse, Arthur Jones, Pierre Kerfriden, et al.. Goal oriented error estimation in multi-scale shell element finite element problems. Advanced Modeling and Simulation in Engineering Sciences, 2021, 8 (1), ⟨10.1186/s40323-021-00189-2⟩. ⟨hal-03507423⟩
  • Susanne Claus, Pierre Kerfriden, Faezeh Moshfeghifar, Sune Darkner, Kenny Erleben, et al.. Contact modeling from images using cut finite element solvers. Advanced Modeling and Simulation in Engineering Sciences, 2021, 8 (1), ⟨10.1186/s40323-021-00197-2⟩. ⟨hal-03507472⟩
  • D. Steglich, Jacques Besson. Prediction of deformation and failure anisotropy for thin magnesium sheets under mixed-mode loading. Mechanics of Materials, 2021, 163, pp.104064. ⟨10.1016/j.mechmat.2021.104064⟩. ⟨hal-03799375⟩
  • J.M. Scherer, Jacques Besson, Samuel Forest, Jérémy Hure, Benoît Tanguy. A strain gradient plasticity model of porous single crystal ductile fracture. Journal of the Mechanics and Physics of Solids, 2021, 156, pp.104606. ⟨10.1016/j.jmps.2021.104606⟩. ⟨hal-03331658⟩
  • Phuong Anh Dang, Carla Palomino-Durand, Mohamed Elsafi Mabrouk, Pierre Marquaille, Clément Odier, et al.. Rational formulation design of injectable thermosensitive chitosan-based hydrogels for cell encapsulation and delivery. Carbohydrate Polymers, 2021, pp.118836. ⟨10.1016/j.carbpol.2021.118836⟩. ⟨hal-03420627⟩
  • Sylvain Flouriot, Victor de Rancourt, Nicolas Authier, Laurent Lacourt, Samuel Forest, et al.. Modélisation de la durée de vie en fatigue de soudures an alliage de titane. Chocs - Revue scientifique et technique de la Direction des applications militaires, 2021, Matériaux et procédés : un savoir-faire spécifique, 51, pp.61-69. ⟨hal-03891328⟩
  • Youssef Hammadi, David Ryckelynck, Amin El-Bakkali. Data-driven reduced bond graph for nonlinear multiphysics dynamic systems. Applied Mathematics and Computation, 2021, 409, pp.126359. ⟨10.1016/j.amc.2021.126359⟩. ⟨hal-03287284⟩
  • Ali Sayir, Marie-Hélène Berger, Tyson Back, Jonathan Mackey. Microstructure of mayenite 12CaO·7Al 2 O 3 and electron emission characteristics. Journal of the American Ceramic Society, 2021, 104 (11), pp.5750-5763. ⟨10.1111/jace.17925⟩. ⟨hal-03616636⟩
  • Lucien Laiarinandrasana, Clément Bertaux, Nicolas Amouroux, Cristian Ovalle Rodas. Ductile crack initiation and growth on a plasticized Polyvinylchloride during air bag deployment. Journal of Theoretical, Computational and Applied Mechanics, 2021, 2021, pp.1-18. ⟨10.46298/jtcam.7401⟩. ⟨hal-03206110v2⟩
  • Valentin Davaze, Nicolas Vallino, Bertrand Langrand, Jacques Besson, Sylvia Feld-Payet. A non-local damage approach compatible with dynamic explicit simulations and parallel computing. International Journal of Solids and Structures, 2021, 228, pp.110999. ⟨10.1016/j.ijsolstr.2021.02.010⟩. ⟨hal-03163586v2⟩
  • Nissrine Akkari, Fabien Casenave, Thomas Daniel, David Ryckelynck. Data-Targeted Prior Distribution for Variational AutoEncoder. Fluids, 2021, 6 (10), pp.343. ⟨10.3390/fluids6100343⟩. ⟨hal-03359211⟩
  • Harris Farooq, David Ryckelynck, Samuel Forest, Georges Cailletaud, Aldo Marano. A pruning algorithm preserving modeling capabilities for polycrystalline data. Computational Mechanics, 2021, ⟨10.1007/s00466-021-02075-5⟩. ⟨hal-03359208⟩
  • Pablo Pereira Álvarez, Pierre Kerfriden, David Ryckelynck, Vincent Robin. Real-Time Data Assimilation in Welding Operations Using Thermal Imaging and Accelerated High-Fidelity Digital Twinning. Mathematics , 2021, 9 (18), pp.2263. ⟨10.3390/math9182263⟩. ⟨hal-03345602⟩
  • Kais Ammar, Simon David Schmidt, Wolfgang Dornisch, Samuel Forest, Ralf Müller. Phase field model for the martensitic transformation: comparison of the Voigt/Taylor and Khachaturyan approach. Continuum Mechanics and Thermodynamics, 2021, 33 (5), pp.2075-2094. ⟨10.1007/s00161-021-01007-1⟩. ⟨hal-03670063⟩
  • Aude Belguise, Sabine Cantournet, Victor Fabre, Karine Le Gorju, Valérie Gaucher, et al.. Confinement and distribution of the composition in semicrystalline/amorphous miscible blends of PEKK/PEI: a calorimetry study. Macromolecules, 2021, 54 (16), pp.7364-7376. ⟨10.1021/acs.macromol.1c00344⟩. ⟨hal-03324936⟩
  • Jan Neggers, Eva Héripré, Marc Bonnet, Denis Boivin, Alexandre Tanguy, et al.. Principal image decomposition for multi-detector backscatter electron topography reconstruction. Ultramicroscopy, 2021, 227, pp.113200. ⟨10.1016/j.ultramic.2020.113200⟩. ⟨hal-03261200⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Ductile fracture of materials with randomly distributed voids. International Journal of Fracture, 2021, 230, pp.193-223. ⟨10.1007/s10704-021-00562-7⟩. ⟨hal-03372371⟩
  • Xavier Truant, Georges Cailletaud, Florent Fournier Dit Chabert, Ivan Guillot, Serge Kruch. Cyclic elastoplastic behaviour of 2198-T8 aluminium alloy welded panels. Continuum Mechanics and Thermodynamics, 2021, 33 (4), pp.1691-1707. ⟨10.1007/s00161-021-01002-6⟩. ⟨hal-03191672⟩
  • B. Staber, Samuel Forest, M. Al Kotob, Matthieu Mazière, T. Rose. Loss of ellipticity analysis in non-smooth plasticity. International Journal of Solids and Structures, 2021, 222-223, pp.111010. ⟨10.1016/j.ijsolstr.2021.02.021⟩. ⟨hal-03372375⟩
  • Vladimir A. Esin, Anass Assadiki, Vladimir Esin, Rémi Martinez, Warren Poole, et al.. Modelling precipitation hardening in an A356+0.5 wt%Cu cast aluminum alloy. Materials Science and Engineering: A, 2021, 819, pp.141450. ⟨10.1016/j.msea.2021.141450⟩. ⟨hal-03476740⟩
  • Monika Tomczyk, Pawel Osewski, Marie-Hélène Berger, Ryszard Diduszko, Iwona Jóźwik, et al.. Bulk nanocomposite made of ZnO lamellae embedded in the ZnWO4 matrix: growth from the melt. Journal of Materials Science, 2021, 56 (19), pp.11219-11228. ⟨10.1007/s10853-021-06020-y⟩. ⟨hal-03616623⟩
  • Matthieu Maziere, Andreas Mortensen, Samuel Forest. Finite element simulation of the Portevin–Le Chatelier effect in highly reinforced metal matrix composites. Philosophical Magazine, 2021, 101 (12), pp.1471-1489. ⟨10.1080/14786435.2021.1919331⟩. ⟨hal-03372373⟩
  • Antonio Viscusi, Roberta Della Gatta, Francesco Delloro, Ilaria Papa, Alessia Serena Perna, et al.. A novel manufacturing route for integrated 3D-printed composites and cold-sprayed metallic layer. Materials and Manufacturing Processes, 2021, pp.1-14. ⟨10.1080/10426914.2021.1942908⟩. ⟨hal-03522006⟩
  • Mélanie François, Frédéric Demoisson, Mohamed Sennour, Gilles Caboche. Continuous hydrothermal synthesis in supercritical conditions as a novel process for the elaboration of Y-doped BaZrO3. Ceramics International, 2021, 47 (12), pp.17799-17803. ⟨10.1016/j.ceramint.2021.03.044⟩. ⟨hal-04027055⟩
  • Juan Manuel García, Marie‐thérèse Auclair, Thilo F. Morgeneyer. On the use of stereo‐digital image correlation for the alignment of a fatigue testing machine in accordance with international standards: A feasibility study. Strain, 2021, ⟨10.1111/str.12382⟩. ⟨hal-03238717⟩
  • Jon Mackey, Tyson Back, Marie-Hélène Berger, Ali Sayir. Processing and thermal properties of mayenite electride. Journal of the American Ceramic Society, 2021, 104 (5), pp.2238-2249. ⟨10.1111/jace.17646⟩. ⟨hal-03193523⟩
  • Akinobu Shibata, Takashi Yonemura, Yuji Momotani, Myeong-Heom Park, Shusaku Takagi, et al.. Effects of local stress, strain, and hydrogen content on hydrogen-related fracture behavior in low-carbon martensitic steel. Acta Materialia, 2021, 210, pp.116828. ⟨10.1016/j.actamat.2021.116828⟩. ⟨hal-03690727⟩
  • Vladimir A. Esin, Nicolas Cliche, Sylvain Ringeval, Philippe Petit, Jacques Bellus, et al.. Thermokinetic Modelling of High-Temperature Evolution of Primary Nb(C,N) in Austenite Applied to Recrystallization of 316Nb Austenitic Stainless Steel. Metals, 2021, 11 (5), pp.715. ⟨10.3390/met11050715⟩. ⟨hal-03476809⟩
  • Tobias Kaiser, Samuel Forest, Andreas Menzel. A finite element implementation of the stress gradient theory. Meccanica, 2021, 56 (5), pp.1109-1128. ⟨10.1007/s11012-020-01266-3⟩. ⟨hal-03372377⟩
  • Vladimir A. Esin, Ankit Gupta, Bengü Tas, Dominique Korbmacher, Biswanath Dutta, et al.. A Combined Experimental and First-Principles Based Assessment of Finite-Temperature Thermodynamic Properties of Intermetallic Al3Sc. Materials, 2021, 14 (8), pp.1837. ⟨10.3390/ma14081837⟩. ⟨hal-03476818⟩
  • Élodie Kaeshammer, L. Borne, François Willot, Petr Dokládal, S. Belon. Morphological characterization and elastic response of a granular material. Computational Materials Science, 2021, 190, pp.110247. ⟨10.1016/j.commatsci.2020.110247⟩. ⟨hal-03115043⟩
  • Daniel Gärtner, Lisa Belkacemi, Vladimir A. Esin, François Jomard, Andrey Fedotov, et al.. Techniques of Tracer Diffusion Measurements in Metals, Alloys and Compounds. Diffusion foundations, 2021, 29, pp.31-73. ⟨10.4028/www.scientific.net/DF.29.31⟩. ⟨hal-03980354⟩
  • Aldo Marano, Lionel Gélébart, Samuel Forest. FFT-based simulations of slip and kink bands formation in 3D polycrystals: Influence of strain gradient crystal plasticity. Journal of the Mechanics and Physics of Solids, 2021, 149, pp.104295. ⟨10.1016/j.jmps.2021.104295⟩. ⟨hal-03372378⟩
  • Roberta Della Gatta, Antonello Astarita, Domenico Borrelli, Antonio Caraviello, Francesco Delloro, et al.. Manufacturing Of Aluminum Coating On 3D-Printed Onyx With Cold Spray Technology. ESAFORM 2021, 2021, ⟨10.25518/esaform21.858⟩. ⟨hal-03522037⟩
  • Ozge Kose, Maura Tomatis, Francesco Turci, Naila-Besma Belblidia, Jean-François Hochepied, et al.. Short pre-irradiation of TiO2 nanoparticles increases cytotoxicity on human lung coculture system. Chemical Research in Toxicology, 2021, 34 (3), pp.733-742. ⟨10.1021/acs.chemrestox.0c00354⟩. ⟨hal-03330836⟩
  • Sylvain Dépinoy, Mohamed Sennour, Lyliat Ferhat, Christophe Colin. Experimental determination of solute redistribution behavior during solidification of additively manufactured 316L. Scripta Materialia, 2021, 194, pp.113663 -. ⟨10.1016/j.scriptamat.2020.113663⟩. ⟨hal-03492646⟩
  • Damien Colas, Eric Finot, Sylvain Flouriot, Samuel Forest, Matthieu Mazière, et al.. Experimental and Computational Approach to Fatigue Behavior of Polycrystalline Tantalum. Metals, 2021, 11 (3), pp.416. ⟨10.3390/met11030416⟩. ⟨hal-03372383⟩
  • Thomas Daniel, Fabien Casenave, Nissrine Akkari, David Ryckelynck. Data Augmentation and Feature Selection for Automatic Model Recommendation in Computational Physics. Mathematical and computational applications, 2021, 26 (1), pp.17. ⟨10.3390/mca26010017⟩. ⟨hal-03282359⟩
  • Vladimir A. Esin, L. Briez, Mohamed Sennour, Alain Köster, E. Gratiot, et al.. Precipitation-hardness map for Al–Cu–Mg alloy (AA2024-T3). Journal of Alloys and Compounds, 2021, 854, pp.157164. ⟨10.1016/j.jallcom.2020.157164⟩. ⟨hal-03084115⟩
  • Thomas Tancogne-Dejean, Christian C Roth, Thilo F. Morgeneyer, Lukas Helfen, Dirk Mohr. Ductile damage of AA2024-T3 under shear loading: Mechanism analysis through in-situ laminography. Acta Materialia, 2021, 205, pp.116556. ⟨10.1016/j.actamat.2020.116556⟩. ⟨hal-03098188⟩
  • Gilles Rousselier. Porous plasticity revisited: Macroscopic and multiscale modeling. International Journal of Plasticity, 2021, 136, pp.102881 -. ⟨10.1016/j.ijplas.2020.102881⟩. ⟨hal-03493229⟩
  • Mohamed Jebahi, Samuel Forest. Scalar-based strain gradient plasticity theory to model size-dependent kinematic hardening effects. Continuum Mechanics and Thermodynamics, 2021, ⟨10.1007/s00161-020-00967-0⟩. ⟨hal-03119475⟩
  • H. Launay, Jacques Besson, David Ryckelynck, François Willot. Hyper-reduced arc-length algorithm for stability analysis in elastoplasticity. International Journal of Solids and Structures, 2021, 208-209, pp.167-180. ⟨10.1016/j.ijsolstr.2020.10.014⟩. ⟨hal-03088229⟩
  • Halyna Volkova, Kevin Pachuta, Kyle Crowley, Santosh Kumar Radha, Emily Pentzer, et al.. Electron microscopy and spectroscopic study of structural changes, electronic properties, and conductivity in annealed Li x CoO 2. Physical Review Materials, 2021, 5 (1), ⟨10.1103/PhysRevMaterials.5.015401⟩. ⟨hal-03193526⟩
  • Cristian Ovalle, Peter Cloetens, Henry Proudhon, Thilo F. Morgeneyer, Lucien Laiarinandrasana. Nanocavitation mechanisms in deformed High Density PolyEthylene (HDPE) using synchrotron radiation NanoTomography. Polymer, 2021, 229, pp.123959. ⟨10.1016/j.polymer.2021.123959⟩. ⟨hal-03288721⟩
  • J.M. García, V.A. Esin, Thilo F. Morgeneyer. Strength, fatigue strength and toughness of dissimilar Ti17–Ti64 linear friction welded joints: Effect of soft surface contamination and depletion of α precipitates. Materials Science and Engineering: A, 2021, 799, pp.139989. ⟨10.1016/j.msea.2020.139989⟩. ⟨hal-02938894⟩
  • Chloé Varenne, Frédéric Prima, Cédrik Brozek, Julie Bourgon, Jacques Besson, et al.. High impact resistance of a TWIP β titanium alloy: linking the multi-scale deformation and fracture mechanisms. Journal of Materials Science, 2021, Journal of Materials Science, 56, pp.5201. ⟨10.1007/s10853-020-05582-7⟩. ⟨hal-03065280⟩
  • João P C Bertoldo, Etienne Decencière, David Ryckelynck, Henry Proudhon. A modular U-Net for automated segmentation of X-ray tomography images in composite materials. Frontiers in Materials, 2021, 8, pp.761229. ⟨10.21203/rs.3.rs-721240/v1⟩. ⟨hal-03380106v2⟩
  • Kais Ammar, Benoît Appolaire, Samuel Forest. Splitting of dissolving precipitates during plastic shear: A phase field study. Comptes Rendus. Physique, 2021, 22 (S3), pp.1-18. ⟨10.5802/crphys.82⟩. ⟨hal-03372365⟩
  • Léopold Le Roux, Chao Liu, Ze Ji, Pierre Kerfriden, Daniel Gage, et al.. Automatised quality assessment in additive layer manufacturing using layer-by-layer surface measurements and deep learning. Procedia CIRP, 2021, 99, pp.342-347. ⟨10.1016/j.procir.2021.03.050⟩. ⟨hal-03507454⟩
  • Thilo F. Morgeneyer, Mikhail Khadyko, Ante Buljac, Lukas Helfen, François Hild, et al.. On crystallographic aspects of heterogeneous plastic flow during ductile tearing: 3D measurements and crystal plasticity simulations for AA7075-T651. International Journal of Plasticity, 2021, 144, pp.103028. ⟨10.1016/j.ijplas.2021.103028⟩. ⟨hal-03250030⟩
  • Thai Le Hong, Jean-Christophe Brachet, Jérôme Crépin, Matthieu Le Saux. Combined effects of temperature and of high hydrogen and oxygen contents on the mechanical behavior of a zirconium alloy upon cooling from the βZr phase temperature range. Journal of Nuclear Materials, 2021, 554 (554), pp.153069. ⟨10.1016/j.jnucmat.2021.153069⟩. ⟨hal-03327638⟩
  • Ahmed Zouari, Matthew Bono, David Leboulch, Thomas Le Jolu, Jérôme Crepin, et al.. The effect of strain biaxiality on the fracture of zirconium alloy fuel cladding. Journal of Nuclear Materials, 2021, pp.153070. ⟨10.1016/j.jnucmat.2021.153070⟩. ⟨cea-03330340⟩
  • Pierre Arnaud, Soha Baydoun, Siegfried Fouvry. Modeling adhesive and abrasive wear phenomena in fretting interfaces: A multiphysics approach coupling friction energy, third body and contact oxygenation concepts. Tribology International, 2021, 161, pp.107077. ⟨10.1016/j.triboint.2021.107077⟩. ⟨hal-03453434⟩
  • I.B.C.M. Rocha, Pierre Kerfriden, F.P. van Der Meer. On-the-fly construction of surrogate constitutive models for concurrent multiscale mechanical analysis through probabilistic machine learning. Journal of Computational Physics: X, 2021, 9, pp.100083. ⟨10.1016/j.jcpx.2020.100083⟩. ⟨hal-03507464⟩
  • Paul Lafourcade, Christophe Denoual, Jean-Bernard Maillet, Herve Trumel, Maxime Biessy, et al.. Multiscale modeling of solid explosives thermomechanical behaviour. Chocs, 2021, 51, pp.44. ⟨hal-04385822⟩
  • Clément Bertaux, Nicolas Amouroux, C. Ovalle Ovalle Rodas, Lucien Laiarinandrasana. Impact speed dependency of the ductile failure threshold temperature for a plasticized polyvinylchloride. Continuum Mechanics and Thermodynamics, 2021, 33 (6), pp.2375-2390. ⟨10.1007/s00161-021-01026-y⟩. ⟨hal-03359093⟩
  • Vladimir A. Esin, G.M. Muralikrishna, B. Tas, N. Esakkiraja, V.A. Esin, et al.. Composition dependence of tracer diffusion coefficients in Fe–Ga alloys: A case study by a tracer-diffusion couple method. Acta Materialia, 2021, 203, pp.116446. ⟨10.1016/j.actamat.2020.10.065⟩. ⟨hal-03084114⟩
  • Santosh Kumar Radha, Kyle Crowley, Brian Holler, Xuan Gao, Walter Lambrecht, et al.. Ultrathin 2D-oxides: A perspective on fabrication, structure, defect, transport, electron, and phonon properties. Journal of Applied Physics, 2021, 129 (22), pp.220903. ⟨10.1063/5.0051093⟩. ⟨hal-03616648⟩
  • Can Ngon Nguyen, Georges Cailletaud, Fabrice Barbe, Bernard Marini, Duy-Duan Nguyen, et al.. Identification of crystal plasticity parameters for a non-irradiated and irradiated A508 bainite steel. Metallurgical Research & Technology, 2021, 118, pp.204. ⟨10.1051/metal/2021006⟩. ⟨hal-03104385⟩
  • Hugo Launay, François Willot, David Ryckelynck, Jacques Besson. Mechanical assessment of defects in welded joints: morphological classification and data augmentation. Journal of Mathematics in Industry, 2021, 11 (8), pp.18. ⟨10.1186/s13362-021-00114-7⟩. ⟨hal-03417140⟩
  • Clémentine Fellah, James Braun, Cédric Sauder, Fausto G Sirotti, Marie-Hélène Berger. Impact of ex-PAN carbon fibers thermal treatment on the mechanical behavior of C/SiC composites and on the fiber/matrix coupling. Carbon Trends, 2021, 5, pp.10.1016/j.cartre.2021.100107. ⟨10.1016/j.cartre.2021.100107⟩. ⟨cea-03355543⟩
  • Andrei G Shvarts, Julien Vignollet, V A Yastrebov. Computational framework for monolithic coupling for thin fluid flow in contact interfaces. Computer Methods in Applied Mechanics and Engineering, 2021, 379, pp.113738. ⟨10.1016/j.cma.2021.113738⟩. ⟨hal-03065808v2⟩
  • D. Grange, A Queva, Gildas Guillemot, Michel Bellet, Jean-Dominique Bartout, et al.. Effect of processing parameters during the laser beam melting of Inconel 738: Comparison between simulated and experimental melt pool shape. Journal of Materials Processing Technology, 2021, 289, pp.116897. ⟨10.1016/j.jmatprotec.2020.116897⟩. ⟨hal-02986926⟩
  • Anna Ask, Samuel Forest, Benoit Appolaire, Kais Ammar. Microstructure evolution in deformed polycrystals predicted by a diffuse interface Cosserat approach. Advanced Modeling and Simulation in Engineering Sciences, 2020, 7 (1), ⟨10.1186/s40323-020-00146-5⟩. ⟨hal-02494630⟩
  • Jean-Michel Scherer, Vikram Phalke, Jacques Besson, Samuel Forest, Jeremy Hure, et al.. Lagrange multiplier based vs micromorphic gradient-enhanced rate-(in)dependent crystal plasticity modelling and simulation. Computer Methods in Applied Mechanics and Engineering, 2020, 372, pp.113426. ⟨10.1016/j.cma.2020.113426⟩. ⟨hal-02952562⟩
  • R. Michel, Y. Bienvenu, Anthony Chesnaud, Alain Thorel. Study of the tensile behaviour of tungsten wires from ambient temperature to 320 °C in relation to their microstructure. International Journal of Refractory Metals and Hard Materials, 2020, 92, pp.105325 -. ⟨10.1016/j.ijrmhm.2020.105325⟩. ⟨hal-03491330⟩
  • Lu Tuan Le, Kais Ammar, Samuel Forest. Efficient simulation of single and poly-crystal plasticity based on the pencil glide mechanism. Comptes Rendus. Mécanique, 2020, 348 (10-11), pp.847-876. ">⟨10.5802/crmeca.44>⟩. ⟨hal-03381730⟩
  • Vladimir A. Esin, G. Mohan Muralikrishna, Vladimir Esin, Kaustubh Kulkarni, B.S. Murty, et al.. Atomic transport in B2-ordered Al(Fe,Ni) alloys: Tracer-interdiffusion couple approach. Intermetallics, 2020, 126, pp.106920. ⟨10.1016/j.intermet.2020.106920⟩. ⟨hal-03084110⟩
  • F. Cadiou, T. Douillard, François Willot, J-C. Badot, B. Lestriez, et al.. Effective Electronic and Ionic Conductivities of Dense EV-Designed NMC-Based Positive Electrodes using Fourier Based Numerical Simulations on FIB/SEM Volumes. Journal of The Electrochemical Society, 2020, 167 (14), pp.140504. ⟨10.1149/1945-7111/abbf68⟩. ⟨hal-03011766⟩
  • V.A. Esin, R. Mallick, M. Dadé, B. Denand, J. Delfosse, et al.. Combined synchrotron X-ray diffraction, dilatometry and electrical resistivity in situ study of phase transformations in a Ti2AlNb alloy. Materials Characterization, 2020, 169, pp.110654. ⟨10.1016/j.matchar.2020.110654⟩. ⟨hal-02955731⟩
  • Raffaele Russo, Samuel Forest, Franck Andrés Girot mata. Thermomechanics of Cosserat medium: modeling adiabatic shear bands in metals. Continuum Mechanics and Thermodynamics, 2020, ⟨10.1007/s00161-020-00930-z⟩. ⟨hal-03372388⟩
  • Raphaël Cusset, Farida Azzouz, Jacques Besson, Marta Dragon-Louiset, Vincent Jacques, et al.. Modeling plasticity of an aluminum 2024T351 thick rolled plate for cold forming applications. International Journal of Solids and Structures, 2020, 202, pp.463-474. ⟨10.1016/j.ijsolstr.2020.05.005⟩. ⟨hal-03027179⟩
  • Brian Holler, Kyle Crowley, Marie-Hélène Berger, Xuan Gao. 2D Semiconductor Transistors with Van der Waals Oxide MoO 3 as Integrated High‐κ Gate Dielectric. Advanced Electronic Materials, 2020, 6 (10), pp.2000635. ⟨10.1002/aelm.202000635⟩. ⟨hal-03193521⟩
  • Sicong C Ren, Thilo F. Morgeneyer, Matthieu Mazière, Gilles Rousselier, Samuel Forest. Effect of Lüders and Portevin-Le Chatelier localization bands on plasticity and fracture of notched steel specimens studied by DIC and FE simulations. International Journal of Plasticity, 2020, 136, pp.102880. ⟨10.1016/j.ijplas.2020.102880⟩. ⟨hal-02981511v2⟩
  • Kyle Crowley, Kevin Pachuta, Santosh Kumar Radha, Halyna Volkova, Alp Sehirlioglu, et al.. Electrical Characterization and Charge Transport in Chemically Exfoliated 2D Li x CoO 2 Nanoflakes. Journal of Physical Chemistry C, 2020, 124 (38), pp.20693-20700. ⟨10.1021/acs.jpcc.0c04747⟩. ⟨hal-03193516⟩
  • Anne-Françoise Gourgues-Lorenzon, Frank Tioguem, Franck N'Guyen, Matthieu Mazière, Franck Tankoua, et al.. Advanced quantification of the carbide spacing and correlation with dimple size in a high-strength medium carbon martensitic steel. Materials Characterization, 2020, 167, pp.110531. ⟨10.1016/j.matchar.2020.110531⟩. ⟨hal-03065262⟩
  • D. Grange, Jean-Dominique Bartout, B. Macquaire, C. Colin. Processing a non-weldable nickel-base superalloy by Selective Laser Melting: role of the shape and size of the melt pools on solidification cracking. Materialia, 2020, 12, pp.100686 -. ⟨10.1016/j.mtla.2020.100686⟩. ⟨hal-03491118⟩
  • Ozge Kose, Maura Tomatis, Lara Leclerc, Naila-Besma Belblidia, Jean-François Hochepied, et al.. Impact of the Physicochemical Features of TiO2 Nanoparticles on Their In Vitro Toxicity. Chemical Research in Toxicology, 2020, ⟨10.1021/acs.chemrestox.0c00106⟩. ⟨hal-02923542⟩
  • Vincent Maurel, Vincent Chiaruttini, Manon Abecassis, Alain Köster, Sébastien Dezecot. Influence of a 3D realistic crack path in the driving forces for fatigue crack growth under mode I+II loading. Theoretical and Applied Fracture Mechanics, 2020, 108, pp.102570. ⟨10.1016/j.tafmec.2020.102570⟩. ⟨hal-02873578⟩
  • Vladimir A. Esin, Sai Rajeshwari K., S. Sankaran, K.C. Hari Kumar, Harald Rösner, et al.. Grain boundary diffusion and grain boundary structures of a Ni-Cr-Fe- alloy: Evidences for grain boundary phase transitions. Acta Materialia, 2020, 195, pp.501-518. ⟨10.1016/j.actamat.2020.05.051⟩. ⟨hal-03084108⟩
  • Henry Proudhon, Maxime Pelerin, Andrew King, Wolfgang Ludwig. In situ 4D mechanical testing of structural materials: The data challenge. Current Opinion in Solid State and Materials Science, 2020, pp.100834. ⟨10.1016/j.cossms.2020.100834⟩. ⟨hal-02926097⟩
  • Valentin Davaze, Nicolas Vallino, Sylvia Feld-Payet, Bertrand Langrand, Jacques Besson. Plastic and fracture behavior of a dual phase steel sheet under quasi-static and dynamic loadings. Engineering Fracture Mechanics, 2020, 235, pp.107165. ⟨10.1016/j.engfracmech.2020.107165⟩. ⟨hal-03167467⟩
  • A. Arnaud, Wijdène Guediche, Clément Remacha, Edward Roméro, Henry Proudhon. A laboratory transmission diffraction Laue setup to evaluate single-crystal quality. Journal of Applied Crystallography, 2020, 53 (4), pp.914-926. ⟨10.1107/S1600576720006317⟩. ⟨hal-03027163⟩
  • M.B.B. Pereira, L.M.C. Honório, C.G. Lima-Júnior, E.C. Silva Filho, Fabrice Gaslain, et al.. Modulating the structure of organofunctionalized hydroxyapatite/tripolyphosphate/chitosan spheres for dye removal. Journal of Environmental Chemical Engineering, 2020, 8 (4), pp.103980. ⟨10.1016/j.jece.2020.103980⟩. ⟨hal-03864751⟩
  • Pauline Bonnet, Vladislav Yastrebov, Patrick Queutey, Alban Leroyer, Anne Mangeney, et al.. Modelling capsizing icebergs in the open ocean. Geophysical Journal International, 2020, 223 (2), pp.1265-1287. ⟨10.1093/gji/ggaa353⟩. ⟨hal-02566452⟩
  • Julien Said, Siegfried Fouvry, Georges Cailletaud, Christine Yang, Fikri Hafid. Shear driven crack arrest investigation under compressive state: Prediction of fretting fatigue failure of aluminium strands. International Journal of Fatigue, 2020, 136, pp.105589. ⟨10.1016/j.ijfatigue.2020.105589⟩. ⟨hal-03093096⟩
  • I.B.C.M. B C M Rocha, Pierre Kerfriden, F.P. P van Der Meer. Micromechanics-based surrogate models for the response of composites: A critical comparison between a classical mesoscale constitutive model, hyper-reduction and neural networks. European Journal of Mechanics - A/Solids, 2020, 82, pp.103995. ⟨10.1016/j.euromechsol.2020.103995⟩. ⟨hal-02539783⟩
  • Raphaël Langlois, Raphaël Cusset, Jerome Hosdez, Vincent Bonnand, Benoît Blaysat, et al.. Multi-partner benchmark experiment of fatigue crack growth measurements. Engineering Fracture Mechanics, 2020, 235, ⟨10.1016/j.engfracmech.2020.107157⟩. ⟨hal-02877391⟩
  • Joseph Marae Djouda, Mohamed Bouaziz, Marouene Zouaoui, Matthieu Rambaudon, Julien Gardan, et al.. Experimental method for microscale mechanical characterization of polymeric pre-structured materials manufactured by Fused Deposition Modelling. Polymer Testing, 2020. ⟨hal-03070424⟩
  • Sébastien Joannès, Faisal Islam, Lucien Laiarinandrasana. Uncertainty in Fibre Strength Characterisation Due to Uncertainty in Measurement and Sampling Randomness. Applied Composite Materials, 2020, 27 (3), pp.165-184. ⟨10.1007/s10443-020-09803-9⟩. ⟨hal-03110082⟩
  • C. Ovalle, G. Boisot, Lucien Laiarinandrasana. Effects of stress triaxiality ratio on the heat build-up of polyamide 11 under loading. Mechanics of Materials, 2020, 145, pp.103375. ⟨10.1016/j.mechmat.2020.103375⟩. ⟨hal-03189505⟩
  • B. Denand, V.A. Esin, M. Dehmas, G. Geandier, S. Denis, et al.. Carbon content evolution in austenite during austenitization studied by in situ synchrotron X-ray diffraction of a hypoeutectoid steel. Materialia, 2020, 10, pp.100664. ⟨10.1016/j.mtla.2020.100664⟩. ⟨hal-02985508⟩
  • Samuel Forest. Continuum thermomechanics of nonlinear micromorphic, strain and stress gradient media. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2020, 378 (2170), pp.20190169. ⟨10.1098/rsta.2019.0169⟩. ⟨hal-03027187⟩
  • Joseph Marae Djouda, Mohamed Ali Bouaziz, Marouene Zouaoui, Matthieu Rambaudon, Julien Gardan, et al.. Experimental approach for microscale mechanical characterization of polymeric structured materials obtained by additive manufacturing. Polymer Testing, 2020, 89, pp.106634. ⟨10.1016/j.polymertesting.2020.106634⟩. ⟨hal-03050652⟩
  • Davide Colombo, Hélène Montes, François Lequeux, Sabine Cantournet. Thermo-mechanical modeling of a filled elastomer based on the physics of mobility reduction. Mechanics of Materials, 2020, 143, pp.103319 -. ⟨10.1016/j.mechmat.2020.103319⟩. ⟨hal-03489680⟩
  • Javier Taboada-Gutiérrez, Gonzalo Álvarez-Pérez, Jiahua Duan, Weiliang Ma, Kyle Crowley, et al.. Broad spectral tuning of ultra-low-loss polaritons in a van der Waals crystal by intercalation. Nature Materials, 2020, ⟨10.1038/s41563-020-0665-0⟩. ⟨hal-02545392⟩
  • Vincent Bortolussi, Bruno Figliuzzi, François Willot, Matthieu Faessel, Michel Jeandin. Electrical Conductivity of Metal–Polymer Cold Spray Composite Coatings onto Carbon Fiber-Reinforced Polymer. Journal of Thermal Spray Technology, 2020, 29 (4), pp.642-656. ⟨10.1007/s11666-020-00999-7⟩. ⟨hal-03087970⟩
  • Yazid Madi, Yasuhiro Shinohara, Jacques Besson. Effect of prestrain on ductility and toughness in a high-strength line pipe steel. International Journal of Fracture, 2020, ⟨10.1007/s10704-020-00442-6⟩. ⟨hal-02636866⟩
  • C. Fellah, J. Braun, C. Sauder, F. Sirotti, Marie-Hélène Berger. Influence of the carbon interface on the mechanical behavior of SiC/SiC composites. Composites Part A: Applied Science and Manufacturing, 2020, 133, pp.105867. ⟨10.1016/j.compositesa.2020.105867⟩. ⟨hal-02545393⟩
  • J. Said, S. Garcin, S. Fouvry, Georges Cailletaud, C. Yang, et al.. A multi-scale strategy to predict fretting-fatigue endurance of overhead conductors. Tribology International, 2020, 143, pp.106053. ⟨10.1016/j.triboint.2019.106053⟩. ⟨hal-03093081⟩
  • Jan Rojek, Christian Breite, Yentl Swolfs, Lucien Laiarinandrasana. Void growth measurement and modelling in a thermosetting epoxy resin using SEM and tomography techniques. Continuum Mechanics and Thermodynamics, 2020, 32 (2), pp.471-488. ⟨10.1007/s00161-020-00865-5⟩. ⟨hal-03189508⟩
  • Laurent Lacourt, David Ryckelynck, Samuel Forest, Victor Rancourt, Sylvain Flouriot. Hyper‐reduced direct numerical simulation of voids in welded joints via image‐based modeling. International Journal for Numerical Methods in Engineering, 2020, ⟨10.1002/nme.6320⟩. ⟨hal-02502006⟩
  • François Willot. The effective conductivity of strongly nonlinear media: The dilute limit. International Journal of Solids and Structures, 2020, Special Issue on Physics and Mechanics of Random Structures: From Morphology to Material Properties, 184, pp.287-295. ⟨10.1016/j.ijsolstr.2019.06.006⟩. ⟨hal-02425307⟩
  • K.N. Cundiff, Yazid Madi, A.A. Benzerga. Photo-oxidation of semicrystalline polymers: Damage nucleation versus growth. Polymer, 2020, 188, pp.122090. ⟨10.1016/j.polymer.2019.122090⟩. ⟨hal-02437226⟩
  • Matthias Neumann, Ole Stenzel, François Willot, Lorenz Holzer, Volker Schmidt. Quantifying the influence of microstructure on effective conductivity and permeability: Virtual materials testing. International Journal of Solids and Structures, 2020, Special Issue on Physics and Mechanics of Random Structures: From Morphology to Material Properties, 184, pp.211-220. ⟨10.1016/j.ijsolstr.2019.03.028⟩. ⟨hal-02425310⟩
  • Di Li, Vandad Rohani, Frédéric Fabry, Aravind Parakkulam Ramaswamy, Mohamed Sennour, et al.. Direct conversion of CO2 and CH4 into liquid chemicals by plasma-catalysis. Applied Catalysis B: Environmental, 2020, 261, pp.118228. ⟨10.1016/j.apcatb.2019.118228⟩. ⟨hal-02886661⟩
  • Aurélien Fouque, Georges Cailletaud, Alexandre Bonhomme, François Chaudot, Vladimir A. Esin, et al.. Estimation of the power flux supplied by an electric arc to Ag-SnO2 electrodes based on cross-section observations of the melted zone. European Physical Journal: Applied Physics, 2020, 89 (2), pp.20901. ⟨10.1051/epjap/2020190222⟩. ⟨hal-02903887⟩
  • Faisal Islam, Sébastien Joannès, Steve Bucknell, Yann Leray, Anthony R. Bunsell, et al.. Investigation of tensile strength and dimensional variation of T700 carbon fibres using an improved experimental setup. Journal of Reinforced Plastics and Composites, 2020, 39 (3-4), pp.144 - 162. ⟨10.1177/0731684419873712⟩. ⟨hal-02321387⟩
  • Geralf Hütter, Karam Sab, Samuel Forest. Kinematics and constitutive relations in the stress-gradient theory: interpretation by homogenization. International Journal of Solids and Structures, In press, ⟨10.1016/j.ijsolstr.2020.02.014⟩. ⟨hal-02474059⟩
  • Samuel Forest, François Willot. Preface to a Special Issue of the International Journal of Solids and Structures on Physics and Mechanics of Random Structures: From Morphology to Material Properties In honor of Professor Dominique Jeulin (Mines ParisTech). International Journal of Solids and Structures, 2020, Special Issue on Physics and Mechanics of Random Structures: From Morphology to Material Properties, 184, pp.1-2. ⟨10.1016/j.ijsolstr.2019.10.005⟩. ⟨hal-02425302⟩
  • Eveline Hervé-Luanco. Elastic behaviour of multiply coated fibre-reinforced composites: Simplification of the (n+1)-phase model and extension to imperfect interfaces. International Journal of Solids and Structures, 2020, 196-197, pp.10-25. ⟨10.1016/j.ijsolstr.2020.03.013⟩. ⟨hal-02927532⟩
  • Pierre Kerfriden, S. Claus, I. Mihai, Pedro Bonilla-Villalba, A. Kundu. GOAL-ORIENTED MODEL ADAPTIVITY IN STOCHASTIC ELASTODYNAMICS: SIMULTANEOUS CONTROL OF DISCRETIZATION, SURROGATE MODEL AND SAMPLING ERRORS. International Journal for Uncertainty Quantification, 2020, 10 (3), pp.195-223. ⟨10.1615/Int.J.UncertaintyQuantification.2020031735⟩. ⟨hal-03507515⟩
  • David Ryckelynck, Thibault Goessel, Franck Nguyen. Mechanical dissimilarity of defects in welded joints via Grassmann manifold and machine learning. Comptes Rendus Mécanique, 2020, 348 (10-11), pp.911-935. ⟨10.5802/crmeca.51⟩. ⟨hal-03113503⟩
  • Miles B. Rubin, Samuel Forest. Analysis of material instability of a smooth elastic-inelastic transition model. International Journal of Solids and Structures, In press, ⟨10.1016/j.ijsolstr.2020.01.023⟩. ⟨hal-02455747⟩
  • Lucien Laiarinandrasana, Thilo F. Morgeneyer, Y. Cheng, L. Helfen, V. Le Saux, et al.. Microstructural observations supporting thermography measurements for short glass fibre thermoplastic composites under fatigue loading. Continuum Mechanics and Thermodynamics, 2020, 32, pp.451-469. ⟨10.1007/s00161-019-00748-4⟩. ⟨hal-02052685⟩
  • Antoine-Emmanuel Viard, Justin Dirrenberger, Samuel Forest. Propagating material instabilities in planar architectured materials. International Journal of Solids and Structures, 2020, 202, pp.532-551. ⟨10.1016/j.ijsolstr.2020.05.027⟩. ⟨hal-02919088v2⟩
  • Rami Bouaziz, Laurianne Truffault, Rouslan Borisov, Cristian Ovalle, Lucien Laiarinandrasana, et al.. Elastic Properties of Polychloroprene Rubbers in Tension and Compression during Ageing. Polymers, 2020, 12 (10), pp.2354. ⟨10.3390/polym12102354⟩. ⟨hal-02980985⟩
  • Claudio Findeisen, Samuel Forest, Jörg Hohe, Peter Gumbsch. Discrete and continuum modelling of size effects in architectured unstable metamaterials. Continuum Mechanics and Thermodynamics, 2020, ⟨10.1007/s00161-020-00870-8⟩. ⟨hal-02488079⟩
  • Pierre Kerfriden, Susanne Claus, Iulia Mihai. A mixed-dimensional CutFEM methodology for the simulation of fibre-reinforced composites. Advanced Modeling and Simulation in Engineering Sciences, In press, ⟨10.1186/s40323-020-00154-5⟩. ⟨hal-02529651v2⟩
  • Chao Liu, Léopold Le Roux, Ze Ji, Pierre Kerfriden, Franck Lacan, et al.. Machine Learning-enabled feedback loops for metal powder bed fusion additive manufacturing. Procedia Computer Science, 2020, 176, pp.2586-2595. ⟨10.1016/j.procs.2020.09.314⟩. ⟨hal-03507504⟩
  • Jonathan Champagne, S. Cantournet, Davide Colombo, S. Jamonneau, K. Le Gorju, et al.. Role of Glassy Bridges on the Mechanics of Filled Rubbers under Pressure. Macromolecules, 2020, 53 (10), pp.3728-3737. ⟨10.1021/acs.macromol.0c00395⟩. ⟨hal-02869343v2⟩
  • J.M. Scherer, Vikram Phalke, Jacques Besson, Samuel Forest, Jeremy Hure, et al.. Augmented Lagrangian vs micromorphic gradient-enhanced rate-(in)dependent crystal plasticity modeling and simulation. Computer Methods in Applied Mechanics and Engineering, 2020, pp.103426. ⟨10.1016/j.cma.2020.113426⟩. ⟨cea-03748668⟩
  • Caroline Toffolon-Masclet, Aurélien Perron, Benoît Mazères, Sylvain Dépinoy, Clara Desgranges, et al.. Computational Kinetics: Application to Nuclear Materials. Comprehensive Nuclear Materials, 2020, pp.850-880. ⟨10.1016/B978-0-12-803581-8.11600-5⟩. ⟨hal-03880340⟩
  • Ashok Rajpurohit, Sébastien Joannès, Vicky Singery, Philippe Sanial, Lucien Laiarinandrasana. Hybrid Effect in In-Plane Loading of Carbon/Glass Fibre Based Inter- and Intraply Hybrid Composites. Journal of Composites Science, 2020, 4 (1), pp.6. ⟨10.3390/jcs4010006⟩. ⟨hal-02469579⟩
  • Agathe Fanost, Alice Gimat, Laurence de Viguerie, Pauline Martinetto, Anne-Claire Giot, et al.. Revisiting the identification of commercial and historical green earth pigments. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2020, 584, pp.124035. ⟨10.1016/j.colsurfa.2019.124035⟩. ⟨hal-02315592⟩
  • M. Ryś, Samuel Forest, H. Petryk. A micromorphic crystal plasticity model with the gradient-enhanced incremental hardening law. International Journal of Plasticity, 2020, pp.102655. ⟨10.1016/j.ijplas.2019.102655⟩. ⟨hal-02438490⟩
  • Chloé Varenne, Frédéric Prima, Cédrik Brozek, Julie Bourgon, Jacques Besson, et al.. Deformation and fracture behavior of new strain-transformable titanium alloys: a multi-scale investigation. MATEC Web of Conferences, 2020, 321, pp.11006. ⟨10.1051/matecconf/202032111006⟩. ⟨hal-03065300⟩
  • J.M. García, F. Gaslain, Thilo F. Morgeneyer. On the effect of a thermal treatment on the tensile and fatigue properties of weak zones of similar Ti17 linear friction welded joints and parent material. Materials Characterization, 2020, 169, pp.110570. ⟨10.1016/j.matchar.2020.110570⟩. ⟨hal-02938884⟩
  • Elise Ferreira, Morgan Dal, Christophe Colin, Guillaume Marion, Cyril Gorny, et al.. Experimental and Numerical Analysis of Gas/Powder Flow for Different LMD Nozzles. Metals, 2020, 10 (5), pp.667. ⟨10.3390/met10050667⟩. ⟨hal-02981660⟩
  • François Willot, Renald Brenner, Hervé Trumel. Elastostatic field distributions in polycrystals and cracked media. Philosophical Magazine, 2020, 100 (6), pp.661-687. ⟨10.1080/14786435.2019.1699669⟩. ⟨hal-02425491⟩
  • Samuel Forest, Karam Sab. Finite-deformation second-order micromorphic theory and its relations to strain and stress gradient models. Mathematics and Mechanics of Solids, 2020, 25 (7), pp.1429-1449. ⟨10.1177/1081286517720844⟩. ⟨hal-02919094⟩
  • Eeva Mofakhami, Sylvie Tencé-Girault, Jonathan Perrin, Mario Scheel, Laurent Gervat, et al.. Microstructure-mechanical properties relationships in vibration welded glass-fiber-reinforced polyamide 66: A high-resolution X-ray microtomography study. Polymer Testing, 2020, 85, pp.1-12. ⟨10.1016/j.polymertesting.2020.106454⟩. ⟨hal-02532971⟩
  • Francesco Baldi, Silvia Agnelli, Luca Andena, Bamber Blackman, Leonardo Castellani, et al.. Determination of the Fracture Resistance of Ductile Polymers: The ESIS TC4 Recent Experience. Materials Performance and Characterization, 2020, 9 (5), pp.20190175. ⟨10.1520/MPC20190175⟩. ⟨hal-03207111⟩
  • Jennifer Blondel, Sébastien Joannès, Eveline Hervé-Luanco. Analytical modelling of the effect of morphological fluctuations on the transverse elastic behaviour of unidirectional fibre reinforced composites. International Journal of Solids and Structures, 2020, 206, pp.436-455. ⟨10.1016/j.ijsolstr.2020.06.001⟩. ⟨hal-03109172⟩
  • Raffaele Russo, Franck Andrés Girot Mata, Samuel Forest, Dimitri Jacquin. A Review on Strain Gradient Plasticity Approaches in Simulation of Manufacturing Processes. Journal of Manufacturing and Materials Processing, 2020, 4 (3), pp.87. ⟨10.3390/jmmp4030087⟩. ⟨hal-02954137⟩
  • Raphaël Michel, Maïlie Roquart, Elodie Llusar, Fabrice Gaslain, Sophie Norvez, et al.. Hydrogel-Tissue Adhesion Using Blood Coagulation Induced by Silica Nanoparticle Coatings. ACS Applied Bio Materials, 2020, 3 (12), pp.8808-8819. ⟨10.1021/acsabm.0c01158⟩. ⟨hal-03230809⟩
  • Luc Rémy. Low cycle fatigue of alloys in hot section components: progress in life assessment. Procedia Structural Integrity, 2019, 14, pp.3 - 10. ⟨10.1016/j.prostr.2019.05.002⟩. ⟨hal-03487044⟩
  • Joseph Marae Djouda, Donato Gallittelli, Marouene Zouaoui, Ali Makke, Julien Gardan, et al.. Local scale fracture characterization of an advanced structured material manufactured by fused deposition modeling in 3D printing.. Frattura ed Integrità Strutturale / Fracture and Structural Integrity, 2019, 51, pp.534 - 540. ⟨10.3221/igf-esis.51.40⟩. ⟨hal-03050669⟩
  • Ronan Thieurmel, Jacques Besson, Édouard Pouillier, Aurore Parrot, Antoine Ambard, et al.. Contribution to the understanding of brittle fracture conditions of zirconium alloy fuel cladding tubes during LOCA transient. Journal of Nuclear Materials, 2019, 527, pp.151815. ⟨10.1016/j.jnucmat.2019.151815⟩. ⟨hal-02455379⟩
  • Imanol Martinez Perez, Andrei Constantinescu, Philippe Bastid, Yan-Hui Zhang, Vengatesan Venugopal. Computational fatigue assessment of mooring chains under tension loading. Engineering Failure Analysis, 2019, 106, ⟨10.1016/j.engfailanal.2019.06.073⟩. ⟨hal-02411493⟩
  • Vincent Maurel, Vincent Guipont, Mélanie Theveneau, Basile Marchand, Florent Coudon. Thermal cycling damage monitoring of thermal barrier coating assisted with LASAT (LAser Shock Adhesion Test). Surface and Coatings Technology, 2019, 380, pp.125048. ⟨10.1016/j.surfcoat.2019.125048⟩. ⟨hal-02333594⟩
  • Yazid Madi, J.-M. Garcia, Henry Proudhon, Y. Shinohara, L. Helfen, et al.. On the Origin of the Anisotropic Damage of X100 Line Pipe Steel: Part I—In Situ Synchrotron Tomography Experiments. Integrating Materials and Manufacturing Innovation, 2019, 8 (4), pp.570-596. ⟨10.1007/s40192-019-00165-0⟩. ⟨hal-02437184⟩
  • Lousineh Arakelian, Clémentine Caille, Lionel Faivre, Laurent Corté, Patrick Bruneval, et al.. A clinical‐grade acellular matrix for esophageal replacement. Journal of Tissue Engineering and Regenerative Medicine, 2019, 13 (12), pp.2191-2203. ⟨10.1002/term.2983⟩. ⟨hal-02533119⟩
  • Di Li, Vandad-Julien Rohani, Frédéric Fabry, Aravind Parakkulam Ramaswamy, Mohamed Sennour, et al.. Experimental study on plasma-catalytic synthesis of hydrocarbons from syngas. Applied Catalysis A : General, 2019, 588, pp.117269. ⟨10.1016/j.apcata.2019.117269⟩. ⟨hal-02459265⟩
  • Tom Petit, Jacques Besson, Claire Ritter, Kimberly Colas, Lukas Helfen, et al.. Effect of hardening on toughness captured by stress-based damage nucleation in 6061 aluminum alloy. Acta Materialia, 2019, 180, pp.349-365. ⟨10.1016/j.actamat.2019.08.055⟩. ⟨hal-02307867⟩
  • Harris Farooq, Georges Cailletaud, Samuel Forest, David Ryckelynck. Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses. International Journal of Plasticity, 2019, ⟨10.1016/j.ijplas.2019.10.007⟩. ⟨hal-02357015⟩
  • Akinobu Shibata, Yazid Madi, Kazuho Okada, Nobuhiro Tsuji, Jacques Besson. Mechanical and microstructural analysis on hydrogen-related fracture in a martensitic steel. International Journal of Hydrogen Energy, 2019, 44 (54), pp.29034-29046. ⟨10.1016/j.ijhydene.2019.09.097⟩. ⟨hal-02437234⟩
  • I. Raphael, N. Saintier, H. Rolland, G. Robert, L. Laiarinandrasana. A mixed strain rate and energy based fatigue criterion for short fiber reinforced thermoplastics. International Journal of Fatigue, 2019, 127, pp.131 - 143. ⟨10.1016/j.ijfatigue.2019.06.003⟩. ⟨hal-03484536⟩
  • Moubine Al Kotob, Christelle Combescure, Matthieu Mazière, Tonya Rose, Samuel Forest. A general and efficient multi‐start algorithm for the detection of loss of ellipticity in elastoplastic structures. International Journal for Numerical Methods in Engineering, 2019, ⟨10.1002/nme.6247⟩. ⟨hal-02357003⟩
  • A. King, N. Guignot, J.-P. Deslandes, M. Pelerin, Ineke Joosten, et al.. Recent Tomographic Imaging Developments at the PSICHE Beamline. Integrating Materials and Manufacturing Innovation, 2019, 3D Materials Science 2019, 8, pp.551-558. ⟨10.1007/s40192-019-00155-2⟩. ⟨hal-02336836⟩
  • Vincent Guipont, Geoffrey Bégué, Grégory Fabre, Vincent Maurel. Buckling and interface strength analyses of thermal barrier coatings combining Laser Shock Adhesion Test to thermal cycling. Surface and Coatings Technology, 2019, pp.124938. ⟨10.1016/j.surfcoat.2019.124938⟩. ⟨hal-02308106⟩
  • Faisal Islam, Sébastien Joannès, Lucien Laiarinandrasana. Evaluation of Critical Parameters in Tensile Strength Measurement of Single Fibres. Journal of Composites Science, 2019, 3 (3), pp.69. ⟨10.3390/jcs3030069⟩. ⟨hal-02321373⟩
  • Anne Dennstedt, Fabrice Gaslain, Marion Bartsch, Vincent Guipont, Vincent Maurel. Three-Dimensional Characterization of Cracks in a Columnar Thermal Barrier Coating System for Gas Turbine Applications. Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.400-412. ⟨10.1007/s40192-019-00150-7⟩. ⟨hal-02340235⟩
  • J.M. Scherer, Jacques Besson, Samuel Forest, Jérémy Hure, B. Tanguy. Strain gradient crystal plasticity with evolving length scale: Application to voided irradiated materials. European Journal of Mechanics - A/Solids, 2019, 77, pp.103768. ⟨10.1016/j.euromechsol.2019.04.003⟩. ⟨hal-02266597⟩
  • Anne-Françoise Gourgues-Lorenzon, Q. Tonizzo, Daniel Caillard, A. Perlade, M. Mazière, et al.. Multiscale examination of deformation and fracture mechanisms of a duplex advanced high strength steel: Effect of testing temperature and of micromechanical interactions between microstructural constituents. Materials Science and Engineering: A, 2019, 764, pp.138196. ⟨10.1016/j.msea.2019.138196⟩. ⟨hal-03065259⟩
  • Damien Colas, Eric Finot, Sylvain Flouriot, Samuel Forest, Matthieu Mazière, et al.. Local Ratcheting Phenomena in the Cyclic Behavior of Polycrystalline Tantalum. JOM Journal of the Minerals, Metals and Materials Society, 2019, 71 (8), pp.2586-2599. ⟨10.1007/s11837-019-03539-z⟩. ⟨hal-02266594⟩
  • Liliana Moniz, Qiang Chen, Gildas Guillemot, Michel Bellet, Charles-André Gandin, et al.. Additive manufacturing of an oxide ceramic by laser beam melting—Comparison between finite element simulation and experimental results. Journal of Materials Processing Technology, 2019, 270, pp.106-117. ⟨10.1016/j.jmatprotec.2019.02.004⟩. ⟨hal-02055743⟩
  • Yang Shen, Thilo F. Morgeneyer, Jérôme Garnier, Lucien Allais, Lukas Helfen, et al.. Quantitative Anisotropic Damage Mechanism in a Forged Aluminum Alloy Studied by Synchrotron Tomography and Finite Element Simulations. Advances in Materials Science and Engineering, 2019, 2019, pp.1-12. ⟨10.1155/2019/8739419⟩. ⟨hal-02438293⟩
  • Francisco Rodrigues, Thomas Georgelin, Guillaume Gabant, Baptiste Rigaud, Fabrice Gaslain, et al.. Confinement and Time Immemorial: Prebiotic Synthesis of Nucleotides on a Porous Mineral Nanoreactor. Journal of Physical Chemistry Letters, 2019, 10 (15), pp.4192-4196. ⟨10.1021/acs.jpclett.9b01448⟩. ⟨hal-02308428⟩
  • Fabien Szmytka, Pierre Osmond, Luc Rémy, Pierre-Damien Masson, Agathe Forré, et al.. Some Recent Advances on Thermal–Mechanical Fatigue Design and Upcoming Challenges for the Automotive Industry. Metals, 2019, 9 (7), pp.794. ⟨10.3390/met9070794⟩. ⟨hal-03244576⟩
  • Lucie Baudin, Monika Sitko, Cédric Garion, Paolo Chiggiato, Francesco Delloro, et al.. Morphological and Chemical Characterization of Laser Treated Surface on Copper. Key Engineering Materials, 2019, 813, pp.254-260. ⟨10.4028/www.scientific.net/KEM.813.254⟩. ⟨hal-02521713⟩
  • Patrizio Lomonaco, Sebastien Weiller, Imen Feki, Antoine Debray, Francesco Delloro, et al.. Cold Spray Technology to Promote Conductivity of Short Carbon Fiber Reinforced Polyether-Ether-Ketone (PEEK). Key Engineering Materials, 2019, 813, pp.459-464. ⟨10.4028/www.scientific.net/KEM.813.459⟩. ⟨hal-02521717⟩
  • Valérie Forest, Jean-François Hochepied, Jérémie Pourchez. Importance of Choosing Relevant Biological End Points To Predict Nanoparticle Toxicity with Computational Approaches for Human Health Risk Assessment. Chemical Research in Toxicology, 2019, 32 (7), pp.1320-1326. ⟨10.1021/acs.chemrestox.9b00022⟩. ⟨hal-02189302⟩
  • Joseph Marae Djouda, Benoît Panicaud, Fabrice Gaslain, Jérémie Béal, Yazid Madi, et al.. Local microstructural characterization of an aged UR45N rolled steel: Application of the nanogauges grating coupled EBSD technique. Materials Science and Engineering: A, 2019, 759, pp.537-551. ⟨10.1016/j.msea.2019.05.059⟩. ⟨hal-02279180⟩
  • B. Kondori, Yazid Madi, Jacques Besson, A.A. Benzerga. Evolution of the 3D plastic anisotropy of HCP metals: Experiments and modeling. International Journal of Plasticity, 2019, 117, pp.71-92. ⟨10.1016/j.ijplas.2017.12.002⟩. ⟨hal-02437541⟩
  • Lucien Laiarinandrasana. Stress Heterogeneity Leading to Void Nucleation within Spherulites for Semi-Crystalline Polymers. Crystals, 2019, 9 (6), pp.298. ⟨10.3390/cryst9060298⟩. ⟨hal-03189519⟩
  • Vladislav Yastrebov. The Elastic Contact of Rough Spheres Investigated Using a Deterministic Multi-Asperity Model. Journal of Multiscale Modelling, 2019, 10 (01), pp.1841002. ⟨10.1142/S1756973718410020⟩. ⟨hal-02394130⟩
  • Qiang Cheng, L. Moniz da Silva Sancho, Gildas Guillemot, Charles-André Gandin, M. Bellet, et al.. Level-set modelling of Laser Beam Melting process applied onto ceramic materials – Comparison with experimental results. IOP Conference Series: Materials Science and Engineering, 2019, 529, pp.012002. ⟨10.1088/1757-899X/529/1/012002⟩. ⟨hal-02377810⟩
  • Valérie Forest, Jean-François Hochepied, Lara Leclerc, Adeline Trouvé, Khalil Abdelkebir, et al.. Towards an alternative to nano-QSAR for nanoparticle toxicity ranking in case of small datasets. Journal of Nanoparticle Research, 2019, 21 (5), ⟨10.1007/s11051-019-4541-2⟩. ⟨hal-02132406⟩
  • Quentin Demassieux, Daniel Berghezan, Sabine Cantournet, Henry Proudhon, Costantino Creton. Temperature and aging dependence of strain‐induced crystallization and cavitation in highly crosslinked and filled natural rubber. Journal of Polymer Science Part B: Polymer Physics, 2019, 57 (12), pp.780-793. ⟨10.1002/polb.24832⟩. ⟨hal-02355880⟩
  • Alexandre Pichavant, Élise Provost, Walter Fürst, Jean-François Hochepied. Determination of the temperature dependence of Titanium(IV) hydrolysis and complexation constants in aqueous sulfuric or chlorhydric solutions. Journal of Chemical Thermodynamics, 2019, 131, pp.184-191. ⟨10.1016/j.jct.2018.11.001⟩. ⟨hal-01928549⟩
  • A. Hermant, E. Suzon, Philippe Petit, J. Bellus, E. Georges, et al.. Hot Deformation and Recrystallization Mechanisms in a Coarse-Grained, Niobium Stabilized Austenitic Stainless Steel (316Nb). Metallurgical and Materials Transactions A, 2019, 50 (4), pp.1625-1642. ⟨10.1007/s11661-018-05103-x⟩. ⟨hal-02455375⟩
  • William Hilth, David Ryckelynck, Claire Menet. Data Pruning of Tomographic Data for the Calibration of Strain Localization Models. Mathematical and computational applications, 2019, 24 (1), pp.18. ⟨10.3390/mca24010018⟩. ⟨hal-02513094⟩
  • Andrea Rovinelli, Henry Proudhon, Ricardo A Lebensohn, Michael Sangid. Assessing the reliability of fast Fourier transform-based crystal plasticity simulations of a polycrystalline material near a crack tip. International Journal of Solids and Structures, 2019, ⟨10.1016/j.ijsolstr.2019.02.024⟩. ⟨hal-02355872⟩
  • Victor-Manuel Trejo-Navas, Ante F Buljac, François Hild, Thilo F. Morgeneyer, Lukas Helfen, et al.. A comparative study of image segmentation methods for micromechanical simulations of ductile damage. Computational Materials Science, 2019, 159, pp.43-65. ⟨10.1016/j.commatsci.2018.11.039⟩. ⟨hal-01950835⟩
  • Vladimir A. Esin, Daniel Gaertner, Katrin Abrahams, Josua Kottke, Vladimir Esin, et al.. Concentration-dependent atomic mobilities in FCC CoCrFeMnNi high-entropy alloys. Acta Materialia, 2019, 166, pp.357-370. ⟨10.1016/j.actamat.2018.12.033⟩. ⟨hal-02058623⟩
  • M. Dadé, Vladimir A. Esin, L. Nazé, P. Sallot. Short- and long-term oxidation behaviour of an advanced Ti2AlNb alloy. Corrosion Science, 2019, 148, pp.379-387. ⟨10.1016/j.corsci.2018.11.036⟩. ⟨hal-02058621⟩
  • S. Basseville, M. Niass, D. Missoum-Benziane, J. Leroux, G. Cailletaud. Effect of fretting wear on crack initiation for cylinder-plate and punch-plane tests. Wear, 2019, 420, pp.133 - 148. ⟨10.1016/j.wear.2018.12.059⟩. ⟨hal-03486915⟩
  • Juan Manuel Garcia, Thilo F. Morgeneyer. Strength and fatigue strength of a similar Ti‐6Al‐2Sn‐4Zr‐2Mo‐0.1Si linear friction welded joint. Fatigue and Fracture of Engineering Materials and Structures, 2019, 42 (5), pp.1100-1117. ⟨10.1111/ffe.12973⟩. ⟨hal-02091184⟩
  • Jens Ribbe, Vladimir A. Esin, Sergiy V. Divinski. Grain boundary diffusion of 59Fe in high-purity copper. Acta Materialia, 2019, 165, pp.431-443. ⟨10.1016/j.actamat.2018.11.060⟩. ⟨hal-01959492⟩
  • Raphaël Michel, Léna Poirier, Quentin van Poelvoorde, Josette Legagneux, Mathieu Manaserro, et al.. Interfacial fluid transport is a key to hydrogel bioadhesion. Proceedings of the National Academy of Sciences of the United States of America, 2019, 116 (3), pp.738-743. ⟨10.1073/pnas.1813208116⟩. ⟨hal-02406413⟩
  • François Willot, Hervé Trumel, Dominique Jeulin. The thermoelastic response of cracked polycrystals with hexagonal symmetry. Philosophical Magazine, 2019, 99 (5), pp.606-630. ⟨10.1080/14786435.2018.1547432⟩. ⟨hal-02003023⟩
  • Astrid Perlade, Annie Antoni, Rémy Besson, Daniel Caillard, Michael Callahan, et al.. Development of 3rd generation Medium Mn duplex steels for automotive applications. Materials Science and Technology, 2019, 35 (2), pp.1-16. ⟨10.1080/02670836.2018.1549303⟩. ⟨hal-01952714⟩
  • Zhen-Pei Wang, Leong Hien Poh, Yilin Zhu, Justin Dirrenberger, Samuel Forest. Systematic design of tetra-petals auxetic structures with stiffness constraint. Materials & Design, 2019, 170, pp.107669. ⟨10.1016/j.matdes.2019.107669⟩. ⟨hal-02086703v3⟩
  • Alba Marcellan, Anthony Bunsell, Roland Piques, Lucien Laiarinandrasana. In Situ tensile tests to analyze the mechanical response, crack initiation, and crack propagation in single polyamide 66 fibers. Journal of Polymer Science Part B: Polymer Physics, 2019, 57 (11), pp.680-690. ⟨10.1002/polb.24823⟩. ⟨hal-02486413⟩
  • Hélène Godin, Jean-Denis Mithieux, Coralie Parrens, Guillaume Badinier, Mohamed Sennour, et al.. Effects of cooling path and resulting microstructure on the impact toughness of a hot stamping martensitic stainless steel. Materials Science and Engineering: A, 2019, 742, pp.597-607. ⟨10.1016/j.msea.2018.11.036⟩. ⟨hal-01930294⟩
  • Clément Jailin, Ante F Buljac, Amine Bouterf, François Hild, Stéphane Roux. Fast four-dimensional tensile test monitored via X-ray computed tomography: Elastoplastic identification from radiographs. Journal of Strain Analysis for Engineering Design, 2019, 54 (1), pp.44-53. ⟨10.1177/0309324718810593⟩. ⟨hal-01926380⟩
  • Samuel Forest. Continuum thermomechanics of nonlinear micromorphic, strain and stress gradient media. Philosophical Transactions A, In press. ⟨hal-02328931⟩
  • Maxime Pelerin, Andrew King, Lucien Laiarinandrasana, Henry Proudhon. Development of a Versatile Mechanical Testing Device for In Situ Synchrotron Tomography and Diffraction Experiments. Integrating Materials and Manufacturing Innovation, 2019, 8 (3), pp.378-387. ⟨10.1007/s40192-019-00143-6⟩. ⟨hal-02355866⟩
  • Maxime Hervy, Elsa Weiss-Hortala, Doan Pham Minh, Hadi Dib, Audrey Villot, et al.. Reactivity and deactivation mechanisms of pyrolysis chars from bio-waste during catalytic cracking of tar. Applied Energy, 2019, 237, pp.487-499. ⟨10.1016/j.apenergy.2019.01.021⟩. ⟨hal-01977738⟩
  • Sébastien Dézécot, Matthieu Rambaudon, Alain Köster, Fabien Szmytka, Vincent Maurel, et al.. Fatigue crack growth under large scale yielding condition in a cast automotive aluminum alloy. Materials Science and Engineering: A, 2019, 743, pp.87-97. ⟨10.1016/j.msea.2018.03.008⟩. ⟨hal-01955803⟩
  • Jamie C. Frame, Pierre-Yves Rohan, Laurent Corté, Rachele Allena. A mechano-biological model of multi-tissue evolution in bone. Continuum Mechanics and Thermodynamics, 2019, 31 (1), pp.1-31. ⟨10.1007/s00161-017-0611-9⟩. ⟨hal-02305865⟩
  • Sébastien Dézécot, Matthieu Rambaudon, Alain Köster, Fabien Szmytka, Vincent Maurel, et al.. Fatigue crack growth under large scale yielding condition in a cast automotive aluminum alloy. Materials Science and Engineering: A, 2019, 743, pp.87-97. ⟨10.1016/j.msea.2018.03.008⟩. ⟨hal-03962971⟩
  • Joseph Marae Djouda, Yazid Madi, Fabrice Gaslain, Jérémie Béal, Jérôme Crépin, et al.. Investigation of nanoscale strains at the austenitic stainless steel 316L surface : Coupling between nanogauges gratings and EBSD technique during in situ tensile test. Materials Science and Engineering: A, 2019, 740-741, pp.315-335. ⟨10.1016/j.msea.2018.10.059⟩. ⟨hal-01928618⟩
  • Ravi Raj Purohit Purushottam Raj Purohit, Abhinav Arya, Girish Bojjawar, Maxime Pelerin, Steven van Petegem, et al.. Revealing the role of microstructure architecture on strength and ductility of Ni microwires by in-situ synchrotron X-ray diffraction. Scientific Reports, 2019, 9 (1), pp.79. ⟨10.1038/s41598-018-36472-3⟩. ⟨hal-02281829⟩
  • Tang Gu, J. R. Medy, Vincent Klosek, Olivier Castelnau, Samuel Forest, et al.. Multiscale modeling of the elasto-plastic behavior of architectured and nanostructured Cu-Nb composite wires and comparison with neutron diffraction experiments. International Journal of Plasticity, 2019, 122, pp.1-30. ⟨10.1016/j.ijplas.2019.04.011⟩. ⟨hal-02266595v2⟩
  • Amandine Sergeant, Anne Mangeney, Vladislav A. Yastrebov, Fabian S.A. Walter, Jean Paul Montagner, et al.. Monitoring Greenland ice sheet buoyancy-driven calving discharge using glacial earthquakes. Annals of Glaciology, 2019, pp.1- 21. ⟨10.1017/aog.2019.7⟩. ⟨hal-02139311v2⟩
  • Anna Ask, Samuel Forest, Benoit Appolaire, Kais Ammar. Cosserat crystal plasticity with dislocation driven grain boundary migration. Journal of Micromechanics and Molecular Physics, 2018, ⟨10.1142/S242491301840009X⟩. ⟨hal-01908396v2⟩
  • Sicong Ren, Thilo F. Morgeneyer, Matthieu Mazière, Samuel Forest, Gilles Rousselier. Portevin-Le Chatelier effect triggered by complex loading paths in an Al–Cu aluminium alloy. Philosophical Magazine, 2018, 99, pp.659-678. ⟨10.1080/14786435.2018.1550296⟩. ⟨hal-02003754⟩
  • Franck N'Guyen, Selim M. Barhli, Daniel Pino Muñoz, David Ryckelynck. Computer vision with error estimation for reduced order modeling of macroscopic mechanical tests. Complexity, 2018, 2018, 10 p. ⟨10.1155/2018/3791543⟩. ⟨hal-01955929⟩
  • Francesco Delloro, Didier Zagouri, Michel Boustié, Michel Jeandin. A Laser Shock Approach to Cold Spray. Materials Science Forum, 2018, 941, pp.1833-1840. ⟨10.4028/www.scientific.net/MSF.941.1833⟩. ⟨hal-02061215⟩
  • Andrea Rovinelli, Michael Sangid, Henry Proudhon, Wolfgang Ludwig. Using machine learning and a data-driven approach to identify the small fatigue crack driving force in polycrystalline materials. npj Computational Materials, 2018, 4 (1), 10 p. ⟨10.1038/s41524-018-0094-7⟩. ⟨hal-01869114⟩
  • Jean-Baptiste Gasnier, François Willot, Hervé Trumel, Dominique Jeulin, Jacques Besson. Thermoelastic properties of microcracked polycrystals. Part I : Adequacy of Fourier-based methods for cracked elastic bodies. International Journal of Solids and Structures, 2018, 155, pp.248-256. ⟨10.1016/j.ijsolstr.2018.07.024⟩. ⟨hal-01932739v2⟩
  • Chenghui Gao, Henry Proudhon, Ming Liu. Three-dimensional finite element analysis of shallow indentation of rough strain-hardening surface. Friction, 2018, ⟨10.1007/s40544-018-0245-3⟩. ⟨hal-02355854⟩
  • Nathan Selles, Andrew King, Henry Proudhon, Nicolas Saintier, Lucien Laiarinandrasana. Time dependent voiding mechanisms in polyamide 6 submitted to high stress triaxiality : experimental characterisation and finite element modelling. Mechanics of Time-Dependent Materials, 2018, 22 (3), pp.351-371. ⟨10.1007/s11043-017-9360-1⟩. ⟨hal-01874758⟩
  • Qiang Guo, Fahmi Zaïri, Cristian Ovalle Rodas, Xinglin Guo. Constitutive modeling of the cyclic dissipation in thin and thick rubber specimens. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2018, 98 (10), pp.1878-1899. ⟨10.1002/zamm.201800087⟩. ⟨hal-01915453⟩
  • A Venerosy, Hugues Girard, Samuel Saada, Mohamed Sennour, I Stenger, et al.. Colloidal suspensions of monodisperse diamond core-shells. Diamond and Related Materials, 2018, 89, pp.122-131. ⟨10.1016/j.diamond.2018.08.004⟩. ⟨hal-01865461⟩
  • Anna Ask, Samuel Forest, Benoît Appolaire, Kais Ammar. A Cosserat–phase-field theory of crystal plasticity and grain boundary migration at finite deformation. Continuum Mechanics and Thermodynamics, 2018, ⟨10.1007/s00161-018-0727-6⟩. ⟨hal-01908276⟩
  • L. Cao, P. Wollgramm, D. Burger, A. Kostka, Georges Cailletaud, et al.. How evolving multiaxial stress states affect the kinetics of rafting during creep of single crystal Ni-base superalloys. Acta Materialia, 2018, 158, pp.381-392. ⟨10.1016/j.actamat.2018.07.061⟩. ⟨hal-01869054⟩
  • Tom Petit, Claire Ritter, Jacques Besson, Thilo F. Morgeneyer. Impact of machine stiffness on ‘‘pop-in’’ crack propagation instabilities. Engineering Fracture Mechanics, 2018, 202, pp.405-422. ⟨10.1016/j.engfracmech.2018.08.007⟩. ⟨hal-01915471⟩
  • Christian Roth, Thilo F. Morgeneyer, Yin Cheng, Lukas Helfen, Dirk Mohr. Ductile damage mechanism under shear-dominated loading: In-situ tomography experiments on dual phase steel and localization analysis. International Journal of Plasticity, 2018, 109, pp.169-192. ⟨10.1016/j.ijplas.2018.06.003⟩. ⟨hal-01869156⟩
  • Manon Abecassis, Alain Köster, Vladimir A. Esin, Vincent Chiaruttini, Vincent Maurel. Crack growth behavior in dissimilar welded Ti based alloys under biaxial fatigue loading. International Journal of Fatigue, 2018, pp.209-224. ⟨10.1016/j.ijfatigue.2018.09.013⟩. ⟨hal-01883371⟩
  • A.I. Vakis, Vladislav Yastrebov, J. Scheibert, L. Nicola, D. Dini, et al.. Modeling and simulation in tribology across scales : An overview. Tribology International, 2018, 125, pp.169-199. ⟨10.1016/j.triboint.2018.02.005⟩. ⟨hal-01802145⟩
  • Hyung-Jun Chang, Fivel Marc, Jean-Loup Strudel. Micromechanics of primary creep in Ni base superalloys. International Journal of Plasticity, 2018, 108, pp.21-39. ⟨10.1016/j.ijplas.2018.04.009⟩. ⟨hal-01845076⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, S. Cooreman, Anne-Françoise Gourgues-Lorenzon. Quantification and microstructural origin of the anisotropic nature of the sensitivity to brittle cleavage fracture propagation for hot-rolled pipeline steels. International Journal of Fracture, 2018, 212 (2), pp.143-166. ⟨10.1007/s10704-018-0297-4⟩. ⟨hal-01869022⟩
  • Amal Chebbi, Vincent Guipont, Khaled Elleuch, Michel Jeandin. Effects of 316SS addition on the properties of the coatings based on Al 2 O 3 applied by plasma spraying. Journal of Composite Materials, 2018, 52 (19), pp.2597-2608. ⟨10.1177/0021998317751282⟩. ⟨hal-01868955⟩
  • Anthony R. Bunsell, Larissa Gorbatikh, Hannah Morton, Soraia Pimenta, Ian Sinclair, et al.. Benchmarking of strength models for unidirectional composites under longitudinal tension. Composites Part A: Applied Science and Manufacturing, 2018, 111, pp.138-150. ⟨10.1016/j.compositesa.2018.03.016⟩. ⟨hal-01825602⟩
  • Alexandre Royer, Thierry Barriere, Yves Bienvenu. Influence of supercritical debinding and processing parameters on final properties of injection-moulded Inconel 718. Powder Technology, 2018, 336, pp.311-317. ⟨10.1016/j.powtec.2018.05.047⟩. ⟨hal-01825802⟩
  • Babak Kondori, Thilo F. Morgeneyer, Lukas Helfen, A. Amine Benzerga. Void growth and coalescence in a magnesium alloy studied by synchrotron radiation laminography. Acta Materialia, 2018, 155, pp.80-94. ⟨10.1016/j.actamat.2018.05.026⟩. ⟨hal-01825657⟩
  • François Ebobisse, Patrizio Neff, Samuel Forest. Well-posedness for the microcurl model in both single and polycrystal gradient plasticity. International Journal of Plasticity, 2018, 107, pp.1-26. ⟨10.1016/j.ijplas.2017.01.006⟩. ⟨hal-01825727⟩
  • Vincent Bortolussi, Bruno Figliuzzi, François Willot, Matthieu Faessel, Michel Jeandin. Morphological modeling of cold spray coatings. Image Analysis & Stereology, 2018, 37 (2), pp.145-158. ⟨10.5566/ias.1894⟩. ⟨hal-01837906⟩
  • Jules Fauque, Isabelle Ramière, David Ryckelynck. Hybrid hyper-reduced modeling for contact mechanics problems. International Journal for Numerical Methods in Engineering, 2018, 115 (1), pp.117-139. ⟨10.1002/nme.5798⟩. ⟨hal-01853252⟩
  • Ante F Buljac, Victor-Manuel Trejo-Navas, Modesar Shakoor, Amine Bouterf, Jan Neggers, et al.. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage. European Journal of Mechanics - A/Solids, 2018, 72, pp.287-297. ⟨10.1016/j.euromechsol.2018.04.010⟩. ⟨hal-01767392⟩
  • Michel Jeandin. Cold spray under the banner of thermal spray in the whirlwind of additive manufacturing. Surface Engineering, 2018, 34 (5), pp.341-343. ⟨10.1080/02670844.2017.1300429⟩. ⟨hal-01806147⟩
  • Andrei G Shvarts, Vladislav Yastrebov. Fluid flow across a wavy channel brought in contact. Tribology International, 2018, 126, pp.116-126. ⟨10.1016/j.triboint.2018.05.005⟩. ⟨hal-01802143⟩
  • Minghao Zhang, Anne-Françoise Gourgues-Lorenzon, Esteban P. Busso, Haiwen Luo, Mingxin Huang. Recrystallisation-assisted creep of an austenitic Fe-Ni alloy under low stresses after hot deformation. Acta Materialia, 2018, 153, pp.23-34. ⟨10.1016/j.actamat.2018.04.050⟩. ⟨hal-01806089⟩
  • Andrea Rovinelli, Michael Sangid, Henry Proudhon, Yoann Guilhem, Ricardo A. Lebensohn, et al.. Predicting the 3D fatigue crack growth rate of short cracks using multimodal data via Bayesian network: in-situ experiments and crystal plasticity simulations. Journal of the Mechanics and Physics of Solids, 2018, 115, pp.208-229. ⟨10.1016/j.jmps.2018.03.007⟩. ⟨hal-01729179⟩
  • Clément Defaisse, Matthieu Mazière, L. Marcin, Jacques Besson. Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality. Engineering Fracture Mechanics, 2018, 194, pp.301-318. ⟨10.1016/j.engfracmech.2017.12.035⟩. ⟨hal-01780585⟩
  • Denis Jalabert, Hicham Zaid, Marie-Hélène Berger, I. Fongkaew, W.R.L. Lambrecht, et al.. Ion blocking dip shape analysis around a LaAlO 3 /SrTiO 3 interface. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2018, 423, pp.67-71. ⟨10.1016/j.nimb.2018.03.010⟩. ⟨hal-01759211⟩
  • Michel Jeandin, Francesco Delloro, P. Léger, V. Bortolussi, M. Sennour. Cold spray under the banner of thermal spray in the whirlwind of additive manufacturing. Surface Engineering, 2018, 941, pp.1-6. ⟨10.1080/02670844.2018.1471188⟩. ⟨hal-02061214⟩
  • Yi Zhang, Eric Lorentz, Jacques Besson. Ductile damage modelling with locking-free regularised GTN model. International Journal for Numerical Methods in Engineering, 2018, 113 (13), pp.1871-1903. ⟨10.1002/nme.5722⟩. ⟨hal-03972195⟩
  • Yoann Guilhem, Stéphanie Basseville, François Curtit, Jean-Michel Stéphan, Georges Cailletaud. Numerical analysis on the effect of surface roughness on the mechanical fields in polycrystalline aggregates. Modelling and Simulation in Materials Science and Engineering, 2018, 26 (4), 045004, 19 p. ⟨10.1088/1361-651X/aab217⟩. ⟨hal-01719022⟩
  • M.-H. Berger, T. Back, P. Soukiassian, D. Martinotti, L. Douillard, et al.. Correction to: Local investigation of the emissive properties of LaB6–ZrB2 eutectics. Journal of Materials Science, 2018, 53 (13), pp.9877-9877. ⟨10.1007/s10853-018-2252-1⟩. ⟨cea-04345070⟩
  • M.-H. Berger, T. Back, P. Soukiassian, D. Martinotti, L. Douillard, et al.. Correction to: Local investigation of the emissive properties of LaB6–ZrB2 eutectics. Journal of Materials Science, 2018, 53 (13), pp.9877-9877. ⟨10.1007/s10853-018-2252-1⟩. ⟨cea-04345078⟩
  • Chao Ling, Samuel Forest, Jacques Besson, Benoit Tanguy, Félix Latourte. A reduced micromorphic single crystal plasticity model at finite deformations. Application to strain localization and void growth in ductile metals. International Journal of Solids and Structures, 2018, 134, pp.43-69. ⟨10.1016/j.ijsolstr.2017.10.013⟩. ⟨hal-01722948⟩
  • Anass Assadiki, Vladimir A. Esin, Miguel Bruno, Rémi Martinez. Stabilizing effect of alloying elements on metastable phases in cast aluminum alloys by CALPHAD calculations. Computational Materials Science, 2018, 145, pp.1-7. ⟨10.1016/j.commatsci.2017.12.056⟩. ⟨hal-01722934⟩
  • Amal Elfiad, Federico Galli, Amar Djadoun, Mohamed Sennour, Saleh Chegrouche, et al.. Natural α-Fe2 O3 as an efficient catalyst for the p-nitrophenol reduction. Materials Science and Engineering: B, 2018, 229, pp.126-134. ⟨10.1016/j.mseb.2017.12.009⟩. ⟨hal-01780582⟩
  • Liliana Moniz, Christophe Colin, Jean-Dominique Bartout, Karim Terki, Marie-Hélène Berger. Laser beam melting of alumina : effect of absorber additions. JOM Journal of the Minerals, Metals and Materials Society, 2018, 70 (3), pp.328-335. ⟨10.1007/s11837-017-2716-9⟩. ⟨hal-01723008⟩
  • Matti Lindroos, Georges Cailletaud, Anssi Laukkanen, Veli-Tapani Kuokkala. Crystal plasticity modeling and characterization of the deformation twinning and strain hardening in Hadfield steels. Materials Science and Engineering: A, 2018, 720, pp.145-159. ⟨10.1016/j.msea.2018.02.028⟩. ⟨hal-01753441⟩
  • Cecilie Duhamel, Mohamed Sennour, Frédéric Georgi, Catherine Guerre, Elizabeth Chaumun, et al.. Characterization of oxide scales formed on alloy 82 in nominal PWR primary water at 340 °C and in hydrogenated steam at 400 °C. Corrosion Science, 2018, 131, pp.386-403. ⟨10.1016/j.corsci.2017.11.029⟩. ⟨hal-01674366⟩
  • Hiba Fekiri, Vladimir A. Esin, Vincent Maurel, Alain Köster, Yves Bienvenu. Microstructure evolution of innovative thermal bridge composite (i-TBC) for power electronics during elaboration. Materials & Design, 2018, 137, pp.68-78. ⟨10.1016/j.matdes.2017.10.009⟩. ⟨hal-01633719⟩
  • Walid Ayadi, Lucien Laiarinandrasana, Kacem Sai. Anisotropic (Continuum Damage Mechanics)-based multi-mechanism model for semi-crystalline polymer. International Journal of Damage Mechanics, 2018, 27 (3), pp.357-386. ⟨10.1177/1056789516679494⟩. ⟨hal-01759183⟩
  • Mathieu Beranger, Morin Guillaume, Sarah Saanouni, Alain Köster, Vincent Maurel. Fatigue of automotive engine cylinder heads – A new model based on crack propagation. MATEC Web of Conferences, 2018, 165, 10013, 7 p. ⟨10.1051/matecconf/201816510013⟩. ⟨hal-01804950⟩
  • Hubert Salmon-Legagneur, S. Vincent, J. Garnier, Anne-Françoise Gourgues-Lorenzon, Eric Andrieu. Anisotropic intergranular damage development and fracture in a 14Cr ferritic ODS steel under high-temperature tension and creep. Materials Science and Engineering: A, 2018, 722, pp.231-241. ⟨10.1016/j.msea.2018.02.102⟩. ⟨hal-01759149⟩
  • Renata Strubbia, Mohamed Sennour, Silvina Hereñú. Effect of 475°C embrittlement on the low cycle fatigue behaviour of lean duplex stainless steels. Fatigue and Fracture of Engineering Materials and Structures, 2018, 41 (2), pp.473-482. ⟨10.1111/ffe.12714⟩. ⟨hal-01700943⟩
  • Ante F Buljac, Thibault F Taillandier-Thomas, Lukas F Helfen, Thilo F. Morgeneyer, François Hild. Evaluation of measurement uncertainties of digital volume correlation applied to laminography data. Journal of Strain Analysis for Engineering Design, 2018, 53, pp.49-65. ⟨10.1177/0309324717748097⟩. ⟨hal-01674568⟩
  • S. Agnelli, F. Baldi, L. Castellani, K. Pisoni, M. Vighi, et al.. Study of the plastic deformation behaviour of ductile polymers: Use of the material key curves. Mechanics of Materials, 2018, 117, pp.105-115. ⟨10.1016/j.mechmat.2017.11.002⟩. ⟨hal-01677854⟩
  • Sarah Berhanu, Maxime Hervy, Elsa Weiss-Hortala, Henry Proudhon, Marie-Hélène Berger, et al.. Advanced characterization unravels the structure and reactivity of wood-based chars. Journal of Analytical and Applied Pyrolysis, 2018, 130, p.79-89. ⟨10.1016/j.jaap.2018.01.024⟩. ⟨hal-01700193⟩
  • Dimitrios Bitounis, Vincent Barnier, Cyril Guibert, Jérémie Pourchez, Valérie Forest, et al.. A method for the quantitative extraction of gold nanoparticles from human bronchoalveolar lavage fluids through a glycerol gradient. Nanoscale, 2018, 10 (6), pp.2955-2969. ⟨10.1039/C7NR04484D⟩. ⟨hal-01806118⟩
  • Michael Atlan, Teresa Simon-Yarza, J.M. Ino, V. Hunsinger, Laurent Corté, et al.. Design, characterization and in-vivo performance of synthetic 2 mm-diameter vessel grafts made of PVA-gelatin blends. Scientific Reports, 2018, 8 (1), pp.7417. ⟨10.1038/s41598-018-25703-2⟩. ⟨hal-01804566⟩
  • Pierre-Olivier Bouchard, Victor-Manuel Trejo-Navas, Modesar Shakoor, Thilo F. Morgeneyer, Ante Buljac, et al.. Recent advances in the finite element modelling of ductile fracture at mesoscale. Procedia Manufacturing, 2018, 15, pp.39-45. ⟨10.1016/j.promfg.2018.07.167⟩. ⟨hal-01858266⟩
  • D Steglich, Jacques Besson. A mechanism-driven plasticity model for deformation by glide and twinning and its application to magnesium alloys. Journal of Physics: Conference Series, 2018, 1063, 012046, 6 p. ⟨10.1088/1742-6596/1063/1/012046⟩. ⟨hal-01869008⟩
  • Ante Buljac, François Hild, Lukas Helfen, Thilo F. Morgeneyer. On deformation and damage micromechanisms in strong work hardening 2198 T3 aluminium alloy. Acta Materialia, 2018, 149, pp.29-45. ⟨10.1016/j.actamat.2018.01.026⟩. ⟨hal-01710066⟩
  • A. Marano, L. Gélébart, Samuel Forest. Intragranular localization induced by softening crystal plasticity analysis of slip and kink bands localization modes from high resolutionFFT-simulations results. Acta Materialia, 2018, 175, pp.262-275. ⟨10.1016/j.actamat.2019.06.010⟩. ⟨cea-02339707⟩
  • Jean-Baptiste Gasnier, François Willot, Hervé Trumel, Dominique Jeulin, Maxime Biessy. Thermoelastic properties of microcracked polycrystals. Part II : The case of jointed polycrystalline TATB. International Journal of Solids and Structures, 2018, 155, pp.257-274. ⟨10.1016/j.ijsolstr.2018.07.025⟩. ⟨hal-01932771v2⟩
  • Felix Fritzen, Bernard Haasdonk, David Ryckelynck, Sebastian Schöps. An algorithmic comparison of the Hyper-Reduction and the Discrete Empirical Interpolation Method for a nonlinear thermal problem. Mathematical and computational applications, 2018, 23 (11), pp.8. ⟨10.3390/mca23010008⟩. ⟨hal-01759176⟩
  • Fabrizio Pagano, Pascal Paulmier, Myriam Kaminski, Alain Thionnet. Numerical and experimental approach for improving quasi-static and fatigue testing of a unidirectional CFRP composite laminate. Procedia Engineering, 2018, 7th International Conference on Fatigue Design, Fatigue Design 2017, 29-30 November 2017, Senlis, France, 213, pp.804-815. ⟨10.1016/j.proeng.2018.02.076⟩. ⟨hal-01758746v2⟩
  • Jamie C Frame, Pierre-Yves Rohan, Laurent Corte, Rachele Allena. Optimal bone structure is dependent on the interplay between mechanics and cellular activities. Mechanics Research Communications, 2018, 92, pp.43-48. ⟨10.1016/j.mechrescom.2018.07.005⟩. ⟨hal-02370909⟩
  • Z. Stoynov, D. Vladikova, B Burdin, A Thorel, Anthony Chesnaud, et al.. Electrochemical testing of an innovative dual membrane fuel cell design in reversible mode. Bulgarian Chemical Communications, 2018, 50, pp.139 - 145. ⟨hal-02460052⟩
  • Andrei Shvarts, Vladislav Yastrebov. Trapped fluid in contact interface. Journal of the Mechanics and Physics of Solids, 2018, 119, pp.140-162. ⟨10.1016/j.jmps.2018.06.016⟩. ⟨hal-01853388⟩
  • Hayat Abdesselam, Jérôme Crépin, André Pineau, Anne-Laure Rouffié, P. Gaborit, et al.. On the crystallographic, stage I-like, character of fine granular area formation in internal fish-eye fatigue cracks. International Journal of Fatigue, 2018, 106, pp.132-142. ⟨10.1016/j.ijfatigue.2017.09.013⟩. ⟨hal-01633714⟩
  • Fabien Szmytka, Pierre Osmond, Luc Rémy, Pierre-Damien Masson, Agathe Forre. Automotive cylinder heads: recent advances on Thermal-Mechanical Fatigue design and upcoming challenges. MATEC Web of Conferences, 2018, 165, 17003, 6 p. ⟨10.1051/matecconf/201816517003⟩. ⟨hal-01804568⟩
  • Amandine Sergeant, Vladislav Yastrebov, Anne Mangeney, Olivier Castelnau, Jean-Paul Montagner, et al.. Numerical modeling of iceberg capsizing responsible for glacial earthquakes. Journal of Geophysical Research: Earth Surface, 2018, 123, pp.3013-3033. ⟨10.1029/2018JF004768⟩. ⟨hal-01943050⟩
  • Hicham Zaid, Marie-Hélène Berger, Denis Jalabert, M. Walls, R. Akrobetu, et al.. Role of the different defects, their population and distribution in the LaAlO3 /SrTiO3 heterostructure's behavior. Journal of Applied Physics, 2018, 123 (15), 155304, 5 p. ⟨10.1063/1.5024554⟩. ⟨cea-01775862⟩
  • Anna Ask, Samuel Forest, Benoit Appolaire, Kais Ammar, Oguz Umut Salman. A Cosserat crystal plasticity and phase field theory for grain boundary migration. Journal of the Mechanics and Physics of Solids, 2018, 115, pp.167-194. ⟨10.1016/j.jmps.2018.03.006⟩. ⟨hal-01615967v2⟩
  • Matti Lindroos, Anssi Laukkanen, Georges Cailletaud, Veli-Tapani Kuokkala. Microstructure based modeling of the strain rate history effect in wear resistant Hadfield steels. Wear, 2018, 396-397, pp.56-66. ⟨10.1016/j.wear.2017.11.007⟩. ⟨hal-01677832⟩
  • Frank Tioguem, Matthieu Mazière, Franck Tankoua, André Galtier, Anne-Françoise Gourgues-Lorenzon. Identification of ductile to brittle transition temperature by using plane strain specimen in tensile test and correlation with instrumented Charpy impact test: experimental and numerical study. Mechanics & Industry, 2018, 19 (1), 107, 11 p. ⟨10.1051/meca/2017034⟩. ⟨hal-01869103⟩
  • Mathieu Beranger, J.M. Fiard, Kais Ammar, Georges Cailletaud. A new fatigue model including thermal ageing for low copper aluminum-silicon alloys. Procedia Engineering, 2018, 7th International Conference on Fatigue Design, Fatigue Design 2017, 29-30 November 2017, Senlis, France, 213, pp.720-729. ⟨10.1016/j.proeng.2018.02.068⟩. ⟨hal-01758761⟩
  • Henry Proudhon, Nicolas Guéninchault, Samuel Forest, Wolfgang Ludwig. Incipient Bulk Polycrystal Plasticity Observed by Synchrotron In-Situ Topotomography. Materials, 2018, 11 (10), pp.2018-1-2018-18. ⟨10.3390/ma11102018⟩. ⟨hal-01916287⟩
  • Yi Zhang, Eric Lorentz, Jacques Besson. Ductile damage modelling with locking-free regularised GTN model. International Journal for Numerical Methods in Engineering, 2018, 113 (13), pp.1871-1903. ⟨10.1002/nme.5722⟩. ⟨hal-01758768⟩
  • Victor Fabre, Grégoire Quandalle, Noëlle Billon, Sabine Cantournet. Time-temperature-water content equivalence on dynamic mechanical response of polyamide 6,6. Polymer, 2018, 137, pp.22-29. ⟨10.1016/j.polymer.2017.10.067⟩. ⟨hal-01693349⟩
  • Ante Buljac, Lukas Helfen, François Hild, Thilo F. Morgeneyer. Effect of void arrangement on ductile damage mechanisms in nodular graphite cast iron: In situ 3D measurements. Engineering Fracture Mechanics, 2018, 192, pp.242-261. ⟨10.1016/j.engfracmech.2018.01.008⟩. ⟨hal-01710087⟩
  • Clément Jailin, Ante F Buljac, Amine Bouterf, Martin Poncelet, François Hild, et al.. Self-calibration for lab-μCT using space-time regularized projection-based DVC and model reduction. Measurement Science and Technology, 2018, 29, 024003, 13 p. ⟨10.1088/1361-6501/aa9818⟩. ⟨hal-01633741⟩
  • F. Delloro, M. Jeandin, Henry Proudhon, M. Faessel, Dominique Jeulin, et al.. A Morphological Approach to the Modeling of the Cold Spray Process. Journal of Thermal Spray Technology, 2017, 26 (8), pp.1838-1850. ⟨10.1007/s11666-017-0624-8⟩. ⟨hal-02061218⟩
  • Vincent Maurel, Alain Köster, Luc Rémy, Matthieu Rambaudon, Djamel Missoum-Benziane, et al.. Fatigue crack growth under large scale yielding condition: The need of a characteristic length scale. International Journal of Fatigue, 2017, 102, pp.184-201. ⟨10.1016/j.ijfatigue.2017.03.021⟩. ⟨hal-03958432⟩
  • Serafino Teseo, Francesco Delloro. Reduced foraging investment as an adaptation to patchy food sources: A phasic army ant simulation. Journal of Theoretical Biology, 2017, 428, pp.48-55. ⟨10.1016/j.jtbi.2017.06.009⟩. ⟨hal-02061230⟩
  • Vincent Maurel, A. Köster, L. Rémy, M. Rambaudon, D. Missoum-Benziane, et al.. Fatigue crack growth under large scale yielding condition: The need of a characteristic length scale. International Journal of Fatigue, 2017, 102, pp.184-201. ⟨10.1016/j.ijfatigue.2017.03.021⟩. ⟨hal-04330271⟩
  • Hiba Bargaoui, Farida Azzouz, Delphine Thibault, Georges Cailletaud. Thermomechanical behavior of resin bonded foundry sand cores during casting. Journal of Materials Processing Technology, 2017, 246, pp.30-41. ⟨10.1016/j.jmatprotec.2017.03.002⟩. ⟨hal-04074831⟩
  • Muhamad Shafiq Sukiman, Toufik Kanit, Franck N'Guyen, Abdellatif Imad, Ahmed El Moumen, et al.. Effective thermal and mechanical properties of randomly oriented short and long fiber composites. Mechanics of Materials, 2017, 107, pp.56-70. ⟨10.1016/j.mechmat.2017.02.002⟩. ⟨hal-01483533⟩
  • Hiba Bargaoui, Farida Azzouz, Delphine Thibault, Georges Cailletaud. Thermomechanical behavior of resin bonded foundry sand cores during casting. Journal of Materials Processing Technology, 2017, 246, pp.30-41. ⟨10.1016/j.jmatprotec.2017.03.002⟩. ⟨hal-01518849⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. The role of the roughness spectral breadth in elastic contact of rough surfaces. Journal of the Mechanics and Physics of Solids, 2017, 107, pp.469-493. ⟨10.1016/j.jmps.2017.07.016⟩. ⟨hal-01599693⟩
  • Eveline Hervé-Luanco. Simplification of the (n+1)-phase model and its extension to non linear behavior. International Journal of Solids and Structures, 2017, 121, pp.135-147. ⟨10.1016/j.ijsolstr.2017.05.021⟩. ⟨hal-01599706⟩
  • Pierre-Emmanuel Leger, Mohamed Sennour, Francesco Delloro, François Borit, Antoine Debray, et al.. Multiscale experimental and numerical approach to the powder particle shape effect on Al-Al2O3 coating build-up. Journal of Thermal Spray Technology, 2017, 26 (7), pp.1445-1460. ⟨10.1007/s11666-017-0618-6⟩. ⟨hal-01599718⟩
  • Cecilie Duhamel, Jacqueline Caballero, Thierry Couvant, Jérôme Crépin, Fabrice Gaslain, et al.. Intergranular oxidation of nickel-base alloys : potentialities of focused ion beam tomography. Oxidation of Metals, 2017, 88 (3-4), pp.447-457. ⟨10.1007/s11085-016-9688-y⟩. ⟨hal-01599811⟩
  • Harry Pommier, Esteban P. Busso, Thilo F. Morgeneyer, André Pineau. Local approach to stress relaxation cracking in a AISI 316L-type austenitic stainless steel : Tomography damage quantification and FE simulations. Engineering Fracture Mechanics, 2017, 183, pp.170-179. ⟨10.1016/j.engfracmech.2017.03.050⟩. ⟨hal-01610353⟩
  • Quentin Roirand, Djamel Missoum-Benziane, Alain Thionnet, Lucien Laiarinandrasana. Finite element modelling of woven composite failure modes at the mesoscopic scale : deterministic versus stochastic approaches. Continuum Mechanics and Thermodynamics, 2017, 29 (5), pp.1081-1092. ⟨10.1007/s00161-017-0553-2⟩. ⟨hal-01610235⟩
  • Andrea Rovinelli, Yoann Guilhem, Henry Proudhon, Ricardo A Lebensohn, Wolfgang Ludwig, et al.. Assessing reliability of fatigue indicator parameters for small crack growth via a probabilistic framework. Modelling and Simulation in Materials Science and Engineering, 2017, 25 (4), 045010, 29 p. ⟨10.1088/1361-651X/aa6c45⟩. ⟨hal-01540936⟩
  • Henry Proudhon, Jia Li, Wolfgang Ludwig, Arjen Roos, Samuel Forest. Simulation of Short Fatigue Crack Propagation in a 3D Experimental Microstructure . Advanced Engineering Materials, 2017, 19 (8), 1600721, 9 p. ⟨10.1002/adem.201600721⟩. ⟨hal-01599912⟩
  • Radhouane Bargougui, Nabil Bouazizi, Jean-François Hochepied, Franck Le Derf, Julien Vieillard, et al.. Microwave-assisted polyol synthesis of mesoporous Ta doped mixed TiO 2 /SnO2 : Application for CO2 capture. Journal of Alloys and Compounds, 2017, 728, pp.391-399. ⟨10.1016/j.jallcom.2017.08.282⟩. ⟨hal-01610281⟩
  • David Moreau, Arthur Villain, Manon Bachy, Henry Proudhon, David N. Ku, et al.. In vivo evaluation of the bone integration of coated poly(vinyl-alcohol) hydrogel fiber implants. Journal of Materials Science: Materials in Medicine, 2017, 28 (8), 114, 11 p. ⟨10.1007/s10856-017-5923-6⟩. ⟨hal-01599772⟩
  • Tang Gu, J.-R Medy, F Volpi, Olivier Castelnau, S Forest, et al.. Multiscale modeling of the anisotropic electrical conductivity of architectured and nanostructured Cu-Nb composite wires and experimental comparison. Acta Materialia, 2017, 141, pp.131-141. ⟨10.1016/j.actamat.2017.08.066⟩. ⟨hal-01633968⟩
  • Vladimir Gantchenko, Jacques Renard. Caractérisation d’une interface collée. Essai Arcan-Mines et mécanique linéaire de la rupture . Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2017, 27 (3-4), pp.319-333. ⟨10.3166/rcma.2017.00019⟩. ⟨hal-01853248⟩
  • Fabien Coussa, Jacques Renard, Sébastien Joannès, Jean-Christophe Teissedre, Rémy Bompoint, et al.. A consistent experimental protocol for the strain rate characterization of thermoplastic fabrics. Strain, 2017, 53 (3), pp.e12220. ⟨10.1111/str.12220⟩. ⟨hal-01610204⟩
  • Sicong Ren, Matthieu Mazière, Samuel Forest, Thilo F. Morgeneyer, Gilles Rousselier. A constitutive model accounting for strain ageing effects on work-hardening. Application to a C–Mn steel. Comptes Rendus Mécanique, 2017, 345 (12), pp.908-921. ⟨10.1016/j.crme.2017.09.005⟩. ⟨hal-01678853⟩
  • B. Bellal, Marie-Hélène Berger, M. Trari. Physical and photoelectrochemical properties of spherical nanoparticles of α-AgBiS 2. Journal of Solid State Chemistry, 2017, 254, pp.178-183. ⟨10.1016/j.jssc.2017.07.023⟩. ⟨hal-01598630⟩
  • Maxime Hervy, Sarah Berhanu, Elsa Weiss-Hortala, Anthony Chesnaud, Claire Gerente, et al.. Multi-scale characterisation of chars mineral species for tar cracking. Fuel, 2017, 189, pp.88-97. ⟨10.1016/j.fuel.2016.10.089⟩. ⟨hal-01391562⟩
  • R.J. Masurel, P. Gelineau, F. Lequeux, Sabine Cantournet, Hélène Montes. Dynamical heterogeneities and mechanical non-linearities: Modeling the onset of plasticity in polymer in the glass transition. European Physical Journal E: Soft matter and biological physics, 2017, 40, pp.116 ⟨10.1140/epje/i2017-11606-5⟩. ⟨hal-01700965⟩
  • Stéphanie Basseville, Georges Cailletaud, T. Ghidossi, Yoann Guilhem, E. Lacoste, et al.. Numerical analysis on the local mechanical fields in polycrystalline 316LN stainless steel under cyclic fatigue loading : Comparison with experimental results. Materials Science and Engineering: A, 2017, 696, pp.122-136. ⟨10.1016/j.msea.2017.04.023⟩. ⟨hal-01518940⟩
  • L. Gallimard, Éric Florentin, David Ryckelynck. Towards error bounds of the failure probability of elastic structures using reduced basis models. International Journal for Numerical Methods in Engineering, 2017, 112 (9), pp.1216-1234. ⟨10.1002/nme.5554⟩. ⟨hal-01633909⟩
  • Dmitry Tkalich, Georges Cailletaud, Vladislav Yastrebov, Alexandre Kane. A micromechanical constitutive modeling of WC hardmetals using finite-element and uniform field models. Mechanics of Materials, 2017, 105, pp.166-187. ⟨10.1016/j.mechmat.2016.11.007⟩. ⟨hal-01497345⟩
  • Arruck Tragangoon, Baramee Patamaprohm, Jacques Renard, Vladimir Gantchenko, Xavier Cerrillo. Failure criterion for composite structure with an open-hole or bolted joint using characteristic volume approach . Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2017, 27, pp.275-299. ⟨10.3166/rcma.2017.00026⟩. ⟨hal-01853251⟩
  • K. Sadecka, Marie-Hélène Berger, K. Orlinski, I. Jozwik, D. A. Pawlak. Evolution of silver in a eutectic-based Bi2O3–Ag metamaterial. Journal of Materials Science, 2017, 52 (10), pp.5503-5510. ⟨10.1007/s10853-016-0746-2⟩. ⟨hal-01504431⟩
  • Matti Lindroos, Anssi Laukkanen, Georges Cailletaud, Veli-Tapani Kuokkala. On the effect of deformation twinning and microstructure to strain hardening of high manganese austenitic steel 3D microstructure aggregates at large strains. International Journal of Solids and Structures, 2017, 125, pp.68-76. ⟨10.1016/j.ijsolstr.2017.07.015⟩. ⟨hal-01599422⟩
  • Sébastien Dézécot, Vincent Maurel, Jean-Yves Buffière, Fabien Szmytka, Alain Köster. 3D characterization and modeling of low cycle fatigue damage mechanisms at high temperature in a cast aluminum alloy. Acta Materialia, 2017, 123, pp.24-34. ⟨10.1016/j.actamat.2016.10.028⟩. ⟨hal-03971030⟩
  • Zhen-Pei Wang, Leong Hien Poh, Justin Dirrenberger, Yilin Zhu, Samuel Forest. Isogeometric shape optimization of smoothed petal auxetic structures via computational periodic homogenization. Computer Methods in Applied Mechanics and Engineering, 2017, 323, pp.250-271. ⟨10.1016/j.cma.2017.05.013⟩. ⟨hal-01540814⟩
  • Tang Gu, Samuel Forest, O Castelnau, Eveline Hervé-Luanco, Florence Lecouturier, et al.. Multiscale modeling of the elastic behavior of architectured and nanostructured Cu–Nb composite wires. International Journal of Solids and Structures, 2017, 121, pp.148-162. ⟨10.1016/j.ijsolstr.2017.05.022⟩. ⟨hal-01638339⟩
  • William Hilth, David Ryckelynck. Fragmentation modeling of a resin bonded sand. EPJ Web of Conferences, 2017, 140 (11004, 4 p.), ⟨10.1051/epjconf/201714011004⟩. ⟨hal-01610282⟩
  • Gilles Rousselier, Thilo F. Morgeneyer, Sicong Ren, Matthieu Mazière, Samuel Forest. Interaction of the Portevin–Le Chatelier phenomenon with ductile fracture of a thin aluminum CT specimen: experiments and simulations. International Journal of Fracture, 2017, 206 (1), pp.95-122. ⟨10.1007/s10704-017-0203-5⟩. ⟨hal-01518980⟩
  • Clement Soret, Yazid Madi, Vincent Gaffard, Jacques Besson. Local approach to fracture applied to the analysis of a full size test on a pipe containing a girth weld defect. Engineering Failure Analysis, 2017, 82, pp.404-419. ⟨10.1016/j.engfailanal.2017.07.035⟩. ⟨hal-01634056⟩
  • Quentin Tonizzo, Anne-Françoise Gourgues-Lorenzon, Matthieu Mazière, Astrid Perlade, Ian Zuazo. Microstructure, plastic flow and fracture behavior of ferrite-austenite duplex low density medium Mn steel. Materials Science and Engineering: A, 2017, 706, pp.217-226. ⟨10.1016/j.msea.2017.09.002⟩. ⟨hal-01599803⟩
  • David Moreau, François Borit, Laurent Corté, Vincent Guipont. Cold spray coating of submicronic ceramic particles on poly(vinyl alcohol) in dry and hydrogel states. Journal of Thermal Spray Technology, 2017, 26 (5), pp.958-969. ⟨10.1007/s11666-017-0551-8⟩. ⟨hal-01599371⟩
  • Anthony Chesnaud, Francesco Delloro, Maya Geagea, André-Pierre Abellard, J. Ouyang, et al.. Corrugated electrode/electrolyte iInterfaces in SOFC : theoretical and experimental development. ECS Transactions, 2017, 78, pp.1851-1863. ⟨10.1149/07801.1851ecst⟩. ⟨hal-01821589⟩
  • Dmitry Tkalich, Alexandre Kane, Afaf Saai, Vladislav Yastrebov, Mikko Hokka, et al.. Wear of cemented tungsten carbide percussive drill–bit inserts : Laboratory and field study. Wear, 2017, 386-387, pp.106-117. ⟨10.1016/j.wear.2017.05.010⟩. ⟨hal-01599701⟩
  • Dmitry Tkalich, Vladislav Yastrebov, Georges Cailletaud, Alexandre Kane. Multiscale modeling of cemented tungsten carbide in hard rock drilling. International Journal of Solids and Structures, 2017, 128, pp.282-295. ⟨10.1016/j.ijsolstr.2017.08.034⟩. ⟨hal-01634073⟩
  • G. Raikova, K. Krezhov, I. Genov, Alain Thorel, Anthony Chesnaud, et al.. Structural and electrochemical characterization of yttrium doped barium cerate BaCe0.85Y0.15O3-α for applications in solid oxide fuel cells. Bulgarian Chemical Communications, 2017, 49 (Special issue C), pp.162-170. ⟨hal-01678037⟩
  • Gabriel Testa, Nicola Bonora, Domenico Gentile, Andrew Ruggiero, Gianluca Iannitti, et al.. Strain capacity assessment of API X65 steel using damage mechanics. Frattura ed Integrità Strutturale / Fracture and Structural Integrity, 2017, 42, pp.315-327. ⟨10.3221/IGF-ESIS.42.33⟩. ⟨hal-01633698⟩
  • Modesar Shakoor, Ante Buljac, Jan Neggers, François Hild, Thilo F. Morgeneyer, et al.. On the choice of boundary conditions for micromechanical simulations based on 3D imaging. International Journal of Solids and Structures, 2017, 112, pp.83-96. ⟨10.1016/j.ijsolstr.2017.02.018⟩. ⟨hal-01471645⟩
  • Valérie Forest, Lara Leclerc, Jean-François Hochepied, Adeline Trouvé, Gwendoline Sarry, et al.. Impact of cerium oxide nanoparticles shape on their in vitro cellular toxicity. Toxicology in Vitro, 2017, 38, pp.136-141. ⟨10.1016/j.tiv.2016.09.022⟩. ⟨hal-01421912⟩
  • Nathan Selles, Peter Cloetens, Henry Proudhon, Thilo F. Morgeneyer, Olga Klinkova, et al.. Voiding mechanisms in deformed polyamide 6 observed at the nanometric scale. Macromolecules, 2017, 50 (11), pp.4372-4383. ⟨10.1021/acs.macromol.7b00727⟩. ⟨hal-01549074⟩
  • Jacques Poirier, Eric Blond, Emmanuel de Bilbao, Rudy Michel, Antoine Coulon, et al.. New advances in the laboratory characterization of refractories : testing and modelling. Metallurgical Research & Technology, 2017, 114 (6), art. 610 - 16 p. ⟨10.1051/metal/2017068⟩. ⟨hal-01617365⟩
  • Ante F Buljac, Thibault F Taillandier-Thomas, Thilo F. Morgeneyer, Lukas F Helfen, Stéphane Roux, et al.. In situ observation of strained bands and ductile damage in thin AA2139-T3 alloy sheets. Procedia IUTAM, 2017, 20, pp.66-72. ⟨10.1016/j.piutam.2017.03.009⟩. ⟨hal-01518925⟩
  • Sylvain Dépinoy, Caroline Toffolon-Masclet, Stéphane Urvoy, Justine Roubaud, Bernard Marini, et al.. Carbide precipitation in 2.25 Cr-1 Mo bainitic steel : effect of heating and isothermal tempering conditions. Metallurgical and Materials Transactions A, 2017, 48 (5), pp.2164-2178. ⟨10.1007/s11661-017-4045-6⟩. ⟨hal-01518779⟩
  • André Pineau, Samuel Forest. Effects of inclusions on the very high cycle fatigue behaviour of steels. Fatigue and Fracture of Engineering Materials and Structures, 2017, 40 (11), pp.1694-1707. ⟨10.1111/ffe.12649⟩. ⟨hal-01633845⟩
  • Daria Prokoshkina, Vladimir A. Esin, Sergiy V. Divinski. Experimental evidence for anomalous grain boundary diffusion of Fe in Cu and Cu-Fe alloys. Acta Materialia, 2017, 133, pp.240-246. ⟨10.1016/j.actamat.2017.05.024⟩. ⟨hal-01540877⟩
  • Mickael Rancic, Christophe Colin, Mohamed Sennour, Jean Phillipe Costes, Gérard Poulachon. Microstructural investigations of the white and deformed layers close to the turned surface of Ti-6Al-4V. Metallurgical and Materials Transactions A, 2017, 48A, pp.389-402. ⟨10.1007/s11661-016-3844-5⟩. ⟨hal-01470735⟩
  • Chao Ling, Benoît Tanguy, Jacques Besson, Samuel Forest, Félix Latourte. Void growth and coalescence in triaxial stress fields in irradiated FCC single crystals. Journal of Nuclear Materials, 2017, 492, pp.157-170. ⟨10.1016/j.jnucmat.2017.04.013⟩. ⟨hal-01540836⟩
  • Sylvain Dépinoy, Bernard Marini, Caroline Toffolon-Masclet, François Roch, Anne-Françoise Gourgues-Lorenzon. Austenite grain growth in a 2.25Cr-1Mo vanadium-free steel accounting for Zener pinning and solute drag : experimental study and modeling. Metallurgical and Materials Transactions A, 2017, 48 (5), pp.2289-2300. ⟨10.1007/s11661-017-4002-4⟩. ⟨hal-01518870⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. On the accurate computation of the true contact-area in mechanical contact of random rough surfaces. Tribology International, 2017, 114, pp.161-171. ⟨10.1016/j.triboint.2017.04.023⟩. ⟨hal-01518514⟩
  • Matthieu Mazière, C. Luis, Anthony Marais, Samuel Forest, M. Gaspérini. Experimental and numerical analysis of the Lüders phenomenon in simple shear. International Journal of Solids and Structures, 2017, 106-107, pp.305-314. ⟨10.1016/j.ijsolstr.2016.07.026⟩. ⟨hal-01496728⟩
  • R.J. Masurel, P. Gelineau, Sabine Cantournet, A. Dequidt, D.R. Long, et al.. Role of dynamical heterogeneities on the mechanical response of confined polymer. Physical Review Letters, 2017, 118 (4), pp.047801. ⟨10.1103/PhysRevLett.118.047801⟩. ⟨hal-01498220⟩
  • Aleksey Sova, Raphael Maestracci, Michel Jeandin, Philippe Bertrand, Igor Smurov. Kinetics of composite coating formation process in cold spray: Modelling and experimental validation. Surface and Coatings Technology, 2017, 318, pp.309-314. ⟨10.1016/j.surfcoat.2016.06.084⟩. ⟨hal-01540822⟩
  • Martin Horák, David Ryckelynck, Samuel Forest. Hyper-reduction of generalized continua. Computational Mechanics, 2017, 59 (5), pp.753-778. ⟨10.1007/s00466-016-1371-2⟩. ⟨hal-01518777⟩
  • Ante Buljac, Modesar Shakoor, Jan Neggers, Marc Bernacki, Pierre-Olivier Bouchard, et al.. Numerical validation framework for micromechanical simulations based on synchrotron 3D imaging. Computational Mechanics, 2017, 59 (3), pp.419-441. ⟨10.1007/s00466-016-1357-0⟩. ⟨hal-01480980⟩
  • Weijie Liu, Khemais Saanouni, Samuel Forest, Ping Hu. The micromorphic approach to generalized heat equations. Journal of Non-Equilibrium Thermodynamics, 2017, 42 (4), pp.327-358. ⟨10.1515/jnet-2016-0080⟩. ⟨hal-01677776⟩
  • Vincent Maurel, Alain Köster, Luc Rémy, Matthieu Rambaudon, Djamel Missoum-Benziane, et al.. Fatigue crack growth under large scale yielding condition: The need of a characteristic length scale. International Journal of Fatigue, 2017, 102, pp.184-201. ⟨10.1016/j.ijfatigue.2017.03.021⟩. ⟨hal-01540932⟩
  • Nicholas J. Goble, Richard Akrobetu, Hicham Zaid, Sukrit Sucharitakul, Marie-Hélène Berger, et al.. Anisotropic electrical resistance in mesoscopic LaAlO 3 /SrTiO 3 devices with individual domain walls . Scientific Reports, 2017, 7, pp.44361. ⟨10.1038/srep44361⟩. ⟨hal-01498236⟩
  • Joseph Marae Djouda, Guillaume Montay, Benoît Panicaud, Jérémie Béal, Yazid Madi, et al.. Nanogauges gratings for strain determination at nanoscale. Mechanics of Materials, 2017, 114, pp.268-278. ⟨10.1016/j.mechmat.2017.08.014⟩. ⟨hal-01601621⟩
  • Marie-Hélène Berger, T. C. Back, P. Soukiassian, D. Martinotti, L. Douillard, et al.. Local investigation of the emissive properties of LaB$_6$–ZrB$_2$ eutectics. Journal of Materials Science, 2017, 52, pp.5537-5543. ⟨10.1007/s10853-017-0816-0⟩. ⟨cea-01484778⟩
  • Quentin Blochet, Francesco Delloro, Franck N’guyen, Dominique Jeulin, François Borit, et al.. Effect of the cold-sprayed aluminum coating-substrate interface morphology on bond strength for aircraft repair application. Journal of Thermal Spray Technology, 2017, 26 (4), pp.671-686. ⟨10.1007/s11666-017-0548-3⟩. ⟨hal-01518736⟩
  • Alain Thionnet, Anthony R. Bunsell, Heng-Yi Chou. Intrinsic mechanisms limiting the use of carbon fiber composite pressure vessels. Journal of Pressure Vessel Technology, 2016, 138 (6), 060910, 5 p. ⟨10.1115/1.4032914⟩. ⟨hal-01357887⟩
  • Bertrand Poumellec, Matthieu Lancry, R. Desmarchelier, Eveline Hervé, Bernard Bourguignon. Parity violation in chiral structure creation under femtosecond laser irradiation in silica glass?. Light: Science and Applications, 2016, 5, pp.e16178. ⟨10.1038/lsa.2016.178⟩. ⟨hal-01426009⟩
  • W. Maktouf, Kais Ammar, I. Ben Naceur, Kacem Saï. Multiaxial high-cycle fatigue criteria and life prediction : Application to gas turbine blade. International Journal of Fatigue, 2016, 92, pp.25-35. ⟨10.1016/j.ijfatigue.2016.06.024⟩. ⟨hal-01357787⟩
  • Ante Buljac, Thibault Taillandier-Thomas, Thilo F. Morgeneyer, Lukas Helfen, Stéphane Roux, et al.. Slant strained band development during flat to slant crack transition in AA 2198 T8 sheet: in situ 3D measurements. International Journal of Fracture, 2016, 200 (1-2), pp.49-62. ⟨10.1007/s10704-015-0052-z⟩. ⟨hal-01385406⟩
  • Arina Marchenko, Matthieu Mazière, Samuel Forest, Jean-Loup Strudel. Crystal plasticity simulation of strain aging phenomena in α-titanium at room temperature. International Journal of Plasticity, 2016, 85, pp.1-33. ⟨10.1016/j.ijplas.2016.05.007⟩. ⟨hal-01358092⟩
  • Lucien Laiarinandrasana, Nathan Selles, Olga Klinkova, Thilo F. Morgeneyer, Henry Proudhon, et al.. Structural versus microstructural evolution of semi-crystalline polymers during necking under tension: Influence of the skin-core effects, the relative humidity and the strain rate. Polymer Testing, 2016, 55, pp.297-309. ⟨10.1016/j.polymertesting.2016.09.012⟩. ⟨hal-01717685⟩
  • Anastasia Iakovleva, Anthony Chesnaud, Irina Animitsa, Guilhem Dezanneau. Insight into the synthesis and electrical properties of alkali-earth-substituted Gd3GaO6 oxide-ion and proton conductors. International Journal of Hydrogen Energy, 2016, 41 (33), pp.14941-14951. ⟨10.1016/j.ijhydene.2016.06.090⟩. ⟨hal-01357898⟩
  • Chao Ling, Jacques Besson, Samuel Forest, Benoît Tanguy, Félix Latourte, et al.. An elastoviscoplastic model for porous single crystals at finite strains and its assessment based on unit cell simulations. International Journal of Plasticity, 2016, 84, pp.58-87. ⟨10.1016/j.ijplas.2016.05.001⟩. ⟨hal-01357790⟩
  • Alain Thionnet, Wassim Trabelsi, Quentin Roirand, Anthony R. Bunsell, Lucien Laiarinandrasana. Modelling of failure of woven composites. Part 1 : Nomenclature defining the interzone concept. Applied Composite Materials, 2016, 23 (4), pp.659-679. ⟨10.1007/s10443-016-9479-2⟩. ⟨hal-01357875⟩
  • Lucien Laiarinandrasana, Wassim Trabelsi, Quentin Roirand, Anthony R. Bunsell, Alain Thionnet. Modelling of failure of woven composites. Part 2 : Experimental and numerical justification of the interzone concept. Applied Composite Materials, 2016, 23 (4), pp.681-705. ⟨10.1007/s10443-016-9480-9⟩. ⟨hal-01357881⟩
  • Lucien Laiarinandrasana, Olga Klinkova, Franck N'Guyen, Henry Proudhon, Thilo F. Morgeneyer, et al.. Three dimensional quantification of anisotropic void evolution in deformed semi-crystalline polyamide 6. International Journal of Plasticity, 2016, 83, pp.19-36. ⟨10.1016/j.ijplas.2016.04.001⟩. ⟨hal-01357865⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas. Influence of carbon content on the primary solidification mode of high strength steels in resistance spot welding conditions. Scripta Materialia, 2016, 120, pp.98-102. ⟨10.1016/j.scriptamat.2016.04.011⟩. ⟨hal-01337970⟩
  • Hélène Sapardanis, Vincent Maurel, Alain Köster, Steve Duvinage, François Borit, et al.. Influence of macroscopic shear loading on the growth of an interfacial crack initiated from a ceramic blister processed by laser shock. Surface and Coatings Technology, 2016, 291, pp.430-443. ⟨10.1016/j.surfcoat.2016.02.050⟩. ⟨hal-01306881⟩
  • François Rasselet, Sébastien Joannès, Jacques Renard, Emilie Roche, Sébastien Pautard. Modélisation et définition d’une cellule élémentaire statistiquement représentative. Application à un composite renforcé en fibres courtes unidirectionnelles. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26 (2), pp.231-264. ⟨10.3166/RCMA.26.231-264⟩. ⟨hal-02074287⟩
  • Faten Bourbita, Luc Rémy. A combined critical distance and energy density model to predict high temperature fatigue life in notched single crystal superalloy members. International Journal of Fatigue, 2016, 84, pp.17-27. ⟨10.1016/j.ijfatigue.2015.11.007⟩. ⟨hal-01254715⟩
  • Marie Dumerval, Stéphane Perrin, Loïc Marchetti, Mohamed Sennour, François Jomard, et al.. Effect of implantation defects on the corrosion of 316L stainless steels in primary medium of pressurized water reactors. Corrosion Science, 2016, 107, pp.1-8. ⟨10.1016/j.corsci.2016.02.007⟩. ⟨hal-04161102⟩
  • M. Yahiaoui, J.-Y. Paris, Karl Delbé, Jean Denape, Laurent Gerbaud, et al.. Quality and wear behavior of graded polycrystalline diamond compact cutters. International Journal of Refractory Metals and Hard Materials, 2016, 56, pp.87-95. ⟨10.1016/j.ijrmhm.2015.12.009⟩. ⟨hal-01258632⟩
  • Raphaël Bongur, Didier Le Nouen, Fabrice Gaslain, Claire Marichal, Bénédicte Lebeau, et al.. Red 33 dye co-encapsulated with cetyltrimethylammonium in mesoporous silica materials. Dyes and Pigments, 2016, 127, pp.1-8. ⟨10.1016/j.dyepig.2015.12.006⟩. ⟨hal-03864757⟩
  • Nathan Selles, Franck Nguyen, Thilo Morgeneyer, Henry Proudhon, Wolfgang Ludwig, et al.. Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests. Polymer Testing, 2016, 49, pp.137-146. ⟨10.1016/j.polymertesting.2015.11.019⟩. ⟨hal-03635195⟩
  • Matthias Vogelgesang, Tomas Farago, Thilo F. Morgeneyer, Lukas Helfen, Tomy dos Santos Rolo, et al.. Real-time image-content-based beamline control for smart 4D X-ray imaging. Journal of Synchrotron Radiation, 2016, 23 (5), pp.1254-1263. ⟨10.1107/S1600577516010195⟩. ⟨hal-01421577⟩
  • Thilo F. Morgeneyer, Thibault F Taillandier-Thomas, Ante F Buljac, Lukas F Helfen, François Hild. On strain and damage interactions during tearing: 3D in situ measurements and simulations for a ductile alloy (AA2139-T3). Journal of the Mechanics and Physics of Solids, 2016, 96, pp.550-571. ⟨10.1016/j.jmps.2016.07.012⟩. ⟨hal-01383922⟩
  • Samuel Forest. Nonlinear regularization operators as derived from the micromorphic approach to gradient elasticity, viscoplasticity and damage. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2016, 472 (2188), 20150755, 27 p. ⟨10.1098/rspa.2015.0755⟩. ⟨hal-01337863⟩
  • Harry Pommier, Esteban P. Busso, Thilo F. Morgeneyer, André Pineau. Intergranular damage during stress relaxation in AISI 316L-type austenitic stainless steels : effect of carbon, nitrogen and phosphorus contents. Acta Materialia, 2016, 103, pp.893-908. ⟨10.1016/j.actamat.2015.11.004⟩. ⟨hal-01254734⟩
  • Tolga Tavsanoglu, Michel Jeandin, O. Addemir. Synthesis and characterisation of thin films in the B–C–N triangle. Surface Engineering, 2016, 32 (10), pp.755-760. ⟨10.1080/02670844.2016.1143197⟩. ⟨hal-01504438⟩
  • Thomas Geoffroy, Jean-Christophe Riou, Yves Bienvenu, Corinne Pons, Sylvain Meille, et al.. Towards high temperature electronic modules in which all components would be attached using silver sintering. Additional Conferences (Device Packaging, HiTEC, HiTEN, & CICMT), 2016, 2016 (HiTEC, mai), pp.000216--000225. ⟨10.4071/2016-HITEC-216⟩. ⟨hal-01761574⟩
  • Raphael Maestracci, A. Sova, Michel Jeandin, J.-M. Malhaire, I. Movchan, et al.. Deposition of composite coatings by cold spray using stainless steel 316L, copper and Tribaloy T-700 powder mixtures. Surface and Coatings Technology, 2016, 287, pp.1-8. ⟨10.1016/j.surfcoat.2015.12.065⟩. ⟨hal-01272339⟩
  • Eveline Hervé-Luanco, Sébastien Joannès. Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part I: Analytical and numerical-based approaches. International Journal of Solids and Structures, 2016, 97-98, pp.625-636. ⟨10.1016/j.ijsolstr.2016.05.015⟩. ⟨hal-01393906⟩
  • Jean-François Ganghoffer, Rachid Rahouadj, Julien Boisse, Samuel Forest. Phase field approaches of bone remodeling based on TIP. Journal of Non-Equilibrium Thermodynamics, 2016, 41, pp.49-75. ⟨10.1515/jnet-2015-0048⟩. ⟨hal-01270141⟩
  • Pierre-Alexis Poulet, Gilles Hochstetter, Andrew King, Henry Proudhon, Sébastien Joannès, et al.. Observations by in-situ X-ray synchrotron computed tomography of the microstructural evolution of semi-crystalline Polyamide 11 during deformation. Polymer Testing, 2016, 56, pp.245-260. ⟨10.1016/j.polymertesting.2016.10.023⟩. ⟨hal-01421561⟩
  • Karam Sab, Frédéric Legoll, Samuel Forest. Stress gradient elasticity theory : existence and uniqueness of solution. Journal of Elasticity, 2016, 123 (2), pp.179-201. ⟨10.1007/s10659-015-9554-1⟩. ⟨hal-01288563⟩
  • Marie Dumerval, Stéphane Perrin, Loic Marchetti, Mohamed Sennour, François Jomard, et al.. Effect of implantation defects on the corrosion of 316L stainless steels in primary medium of pressurized water reactors. Corrosion Science, 2016, 107, pp.1-8. ⟨10.1016/j.corsci.2016.02.007⟩. ⟨hal-01306847⟩
  • Isabelle Charpentier, Komlanvi Lampoh. Sensitivity computations in higher order continuation methods. Applied Mathematical Modelling, 2016, 40 (4), pp.3365-3380. ⟨10.1016/j.apm.2015.10.033⟩. ⟨hal-01122048⟩
  • Laurent Gallimard, David Ryckelynck. A posteriori global error estimator based on the error in the constitutive relation for reduced basis approximation of parametrized linear elastic problems. Applied Mathematical Modelling, 2016, 40, pp.4271-4284. ⟨10.1016/j.apm.2015.11.016⟩. ⟨hal-01305736⟩
  • Alain Thionnet, Anthony R. Bunsell. Fibre break failure processes in unidirectional composites: evaluation of critical damage states. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2016, 374, 20150270, 14 p. ⟨10.1098/rsta.2015.0270⟩. ⟨hal-01338536⟩
  • Sicong Ren, Gilles Rousselier, Thilo F. Morgeneyer, Matthieu Mazière, Samuel Forest. Numerical investigation of dynamic strain ageing and slant ductile fracture in a notched specimen and comparison with synchrotron tomography 3D-DVC. Procedia Structural Integrity, 2016, 21st European Conference on Fracture, ECF21, 20-24 June 2016, Catania, Italy, 2, pp.3385-3392. ⟨10.1016/j.prostr.2016.06.422⟩. ⟨hal-01357815⟩
  • Vincent Maurel, Vladimir A. Esin, Pierre Sallot, Fabrice Gaslain, Sylvain Gailliegue, et al.. Rumpling of nickel aluminide coatings : a reassessment of respective influence of thermal grown oxide and phase transformations. Materials at High Temperatures, 2016, 33 (4-5), pp.318-324. ⟨10.1080/09603409.2016.1177997⟩. ⟨hal-01357836⟩
  • Pongsak Nimdum, Jacques Renard. Experimental analysis and modelling of fatigue behaviour of thick woven laminated composites. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26, pp.87-113. ⟨10.3166/rcma.26.87-113⟩. ⟨hal-01358087⟩
  • Vladimir A. Esin, Fabrice Gaslain. Experimental and thermodynamic analysis of differences in phase transformation of Pt-modified nickel aluminide coating during isothermal and cyclic oxidation. Surface and Coatings Technology, 2016, 307, pp.915-925. ⟨10.1016/j.surfcoat.2016.10.014⟩. ⟨hal-01421908⟩
  • Nicolas M. Cordero, Samuel Forest, Esteban P. Busso. Second strain gradient elasticity of nano-objects. Journal of the Mechanics and Physics of Solids, 2016, 97, pp.92-124. ⟨10.1016/j.jmps.2015.07.012⟩. ⟨hal-01424985⟩
  • I. Ben Naceur, Kacem Sai, T. Hassan, Georges Cailletaud. Micromechanical modeling of the ratcheting behavior of 304 stainless steel. Journal of Engineering Materials and Technology, 2016, 138 (2), 021005, 8 p. ⟨10.1115/1.4032154⟩. ⟨hal-01295547⟩
  • Sébastien Joannès, Eveline Hervé-Luanco. Multiscale modelling of transport phenomena for materials with n-layered embedded fibres. Part II : Investigation of fibre packing effects. International Journal of Solids and Structures, 2016, 97-98, pp.566-574. ⟨10.1016/j.ijsolstr.2016.06.026⟩. ⟨hal-01394147⟩
  • Na Chen, Zhi-Hao Yu, Dan Zhou, Xi-Le Hu, Yi Zang, et al.. N-Oxyamide-linked glycoglycerolipid coated AuNPs for receptor-targeting imaging and drug delivery. Chemical Communications, 2016, 52 (11), pp.2284-2287. ⟨10.1039/c5cc09749e⟩. ⟨hal-04346729⟩
  • Mouhcine Kahziz, Thilo F. Morgeneyer, Matthieu Mazière, L. Helfen, Olivier Bouaziz, et al.. In situ 3D synchrotron laminography assessment of ddge fracture in dual-phase steels : quantitative and numerical analysis. Experimental Mechanics, 2016, 56, pp.177-195. ⟨10.1007/s11340-015-0076-3⟩. ⟨hal-01295524⟩
  • André Pineau, Stephen D. Antolovich. Probabilistic approaches to fatigue with special emphasis on initiation from inclusions. International Journal of Fatigue, 2016, 93, pp.422-434. ⟨10.1016/j.ijfatigue.2016.09.002⟩. ⟨hal-01420396⟩
  • D. Tkalich, M. Fourmeau, A. Kane, C.C. Li, Georges Cailletaud. Experimental and numerical study of Kuru granite under confined compression and indentation. International Journal of Rock Mechanics and Mining Sciences, 2016, 87, pp.55-68. ⟨10.1016/j.ijrmms.2016.05.012⟩. ⟨hal-01338764⟩
  • André Pineau, Amine A. Benzerga, T. Pardoen. Failure of metals I : brittle and ductile fracture. Acta Materialia, 2016, 107, pp.424-483. ⟨10.1016/j.actamat.2015.12.034⟩. ⟨hal-01308255⟩
  • Vladimir A. Esin, Vincent Maurel, Paul Breton, Alain Köster, Serge Selezneff. Increase in ductility of Pt-modified nickel aluminide coating with high temperature ageing. Acta Materialia, 2016, 105, pp.505-518. ⟨10.1016/j.actamat.2015.12.008⟩. ⟨hal-01271801⟩
  • M. Khadyko, S Dumoulin, Georges Cailletaud, O.S. Hopperstad. Latent hardening and plastic anisotropy evolution in AA6060 aluminium alloy. International Journal of Plasticity, 2016, 76, pp.51-74. ⟨10.1016/j.ijplas.2015.07.010⟩. ⟨hal-01199581⟩
  • Manon Abecassis, Alain Köster, Vincent Maurel. Short and long crack growth behavior of welded ferritic stainless steel. Procedia Structural Integrity, 2016, 2, pp.3515-3522. ⟨10.1016/j.prostr.2016.06.438⟩. ⟨hal-01357802⟩
  • Nathan Selles, Franck N'Guyen, Thilo F. Morgeneyer, Henry Proudhon, Wolfgang Ludwig, et al.. Comparison of voiding mechanisms in semi-crystalline polyamide 6 during tensile and creep tests. Polymer Testing, 2016, 49, pp.137-146. ⟨10.1016/j.polymertesting.2015.11.019⟩. ⟨hal-01269595⟩
  • Nicolas Guéninchault, Henry Proudhon, Wolfgang Ludwig. Nanox : a miniature mechanical stress rig designed for near-field X-ray diffraction imaging techniques. Journal of Synchrotron Radiation, 2016, 23, pp.1474-1483. ⟨10.1107/S1600577516013850⟩. ⟨hal-01392783⟩
  • Henry Proudhon, Jia Li, F. Wang, A. Roos, Vincent Chiaruttini, et al.. 3D simulation of short fatigue crack propagation by finite element crystal plasticity and remeshing. International Journal of Fatigue, 2016, 82, pp.238-246. ⟨10.1016/j.ijfatigue.2015.05.022⟩. ⟨hal-01237651⟩
  • Fabrice Gaslain, Hong Thai Le, Cecilie Duhamel, Catherine Guerre, Pierre Laghoutaris. The role of intergranular chromium carbides on intergranular oxidation of nickel based alloys in pressurized water reactors primary water. IOP Conference Series: Materials Science and Engineering, 2016, 109 012004, 10 p. ⟨10.1088/1757-899X/109/1/012004⟩. ⟨hal-01292423⟩
  • Raphael Chosson, Anne-Françoise Gourgues-Lorenzon, V. Vandenberghe, Jean-Christophe Brachet, Jérôme Crépin. Creep flow and fracture behavior of the oxygen-enriched alpha phase in zirconium alloys. Scripta Materialia, 2016, 117, pp.20-23. ⟨10.1016/j.scriptamat.2016.02.021⟩. ⟨hal-01288691⟩
  • Victor de Rancourt, Kais Ammar, Benoît Appolaire, Samuel Forest. Homogenization of viscoplastic constitutive laws within a phase field approach. Journal of the Mechanics and Physics of Solids, 2016, 88, pp.291-319. ⟨10.1016/j.jmps.2015.12.026⟩. ⟨hal-01271808⟩
  • Samuel Forest, M.B. Rubin. A rate-independent crystal plasticity model with a smooth elastic–plastic transition and no slip indeterminacy. European Journal of Mechanics - A/Solids, 2016, 55, pp.278-288. ⟨10.1016/j.euromechsol.2015.08.012⟩. ⟨hal-01251477⟩
  • Yin Cheng, Lucien Laiarinandrasana, Lukas Helfen, Henry Proudhon, Olga Klinkova, et al.. 3D damage micromechanisms in polyamide 6 ahead of a severe notch studied by in situ synchrotron laminography. Macromolecular Chemistry and Physics, 2016, 217, pp.701-715. ⟨10.1002/macp.201500316⟩. ⟨hal-01402600⟩
  • David Ryckelynck, Komlanvi Lampoh, Stéphane Quilici. Hyper-reduced predictions for lifetime assessment of elasto-plastic structures. Meccanica, 2016, 51 (2), pp.309-317. ⟨10.1007/s11012-015-0244-7⟩. ⟨hal-01295849⟩
  • Henry Proudhon, Jia Li, Peter Reischig, Nicolas Guéninchault, Samuel Forest, et al.. Coupling diffraction contrast tomography with the finite element method . Advanced Engineering Materials, 2016, 18, pp.903-912. ⟨10.1002/adem.201500414⟩. ⟨hal-01337825⟩
  • David Moreau, Caroline Chauvet, François Etienne, François P. Rannou, Laurent Corté. Hydrogel films and coatings by swelling-induced gelation. Proceedings of the National Academy of Sciences of the United States of America, 2016, 113 (47), pp.13295-13300. ⟨10.1073/pnas.1609603113⟩. ⟨hal-01424420⟩
  • H.Y. Chou, Alain Thionnet, A. Mouritz, Anthony R. Bunsell. Stochastic factors controlling the failure of carbon/epoxy composites. Journal of Materials Science, 2016, 51, pp.311-333. ⟨10.1007/s10853-015-9390-5⟩. ⟨hal-01251492⟩
  • Yasuhiro Shinohara, Yazid Madi, Jacques Besson. Anisotropic ductile failure of a high-strength line pipe steel. International Journal of Fracture, 2016, 197 (2), pp.127-145. ⟨10.1007/s10704-015-0054-x⟩. ⟨hal-01295773⟩
  • André Pineau, Amine A. Benzerga, T. Pardoen. Failure of metals III : Fracture and fatigue of nanostructured metallic materials. Acta Materialia, 2016, 107, pp.508-544. ⟨10.1016/j.actamat.2015.07.049⟩. ⟨hal-01308286⟩
  • R. Bargougui, Alexandre Pichavant, Jean-François Hochepied, Marie-Hélène Berger, A. Gadri, et al.. Synthesis and characterization of SnO2, TiO2 and Ti0.5Sn0.5O2 nanoparticles as efficient materials for photocatalytic activity. Optical Materials, 2016, 58, pp.253-259. ⟨10.1016/j.optmat.2016.05.026⟩. ⟨hal-01340046⟩
  • Nathan Selles, Nicolas Saintier, Lucien Laiarinandrasana. Voiding mechanisms in semi-crystalline polyamide 6 during creep tests assessed by damage based constitutive relationships and finite elements calculations. International Journal of Plasticity, 2016, 86, pp.112-127. ⟨10.1016/j.ijplas.2016.08.004⟩. ⟨hal-01421403⟩
  • Prajwal A. Sabnis, Samuel Forest, Jonathan Cormier. Microdamage modelling of crack initiation and propagation in FCC single crystals under complex loading conditions. Computer Methods in Applied Mechanics and Engineering, 2016, 312, pp.468-491. ⟨10.1016/j.cma.2016.04.018⟩. ⟨hal-01424994⟩
  • Baramee Patamaprohm, Ekkarin Phongphinittana, Clément Guinault, Vladimir Gantchenko, Jacques Renard, et al.. Study of adhesive joints understatic and fatigue loading. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2016, 26, pp.63-85. ⟨10.3166/rcma.26.63-85⟩. ⟨hal-01357926⟩
  • David Ryckelynck, Djamel Missoum Benziane. Hyper-reduction framework for model calibration in plasticity-induced fatigue. Advanced Modeling and Simulation in Engineering Sciences, 2016, 3 (1), pp.15. ⟨10.1186/s40323-016-0068-6⟩. ⟨hal-01337867⟩
  • Yasmina Hammiche-Bellal, Amar Djadoun, Laaldja Meddour-Boukhobza, Amel Benadda, Aline Auroux, et al.. Effect of the preparation method on the structural and catalytic properties of spinel cobalt-iron oxide. Materials Chemistry and Physics, 2016, 177, pp.384-397. ⟨10.1016/j.matchemphys.2016.04.043⟩. ⟨hal-01336713⟩
  • Hyung-Jun Chang, Nicolas M. Cordero, Christophe Déprés, Marc Fivel, Samuel Forest. Micromorphic crystal plasticity versus discrete dislocation dynamics analysis of multilayer pile-up hardening in a narrow channel. Archive of Applied Mechanics, 2016, 86 (1-2), pp.21-38. ⟨10.1007/s00419-015-1099-z⟩. ⟨hal-01288962⟩
  • Sébastien Dezecot, Jean-Yves Buffiere, Alain Köster, Vincent Maurel, Fabien Szmytka, et al.. In situ 3D characterization of high temperature fatigue damage mechanisms in a cast aluminum alloy using synchrotron X-ray tomography. Scripta Materialia, 2016, 113, pp.254-258. ⟨10.1016/j.scriptamat.2015.11.017⟩. ⟨hal-01255815⟩
  • B.L. Boyce, S.L.B. Kramer, T.R. Bosiljevac, E. Corona, J.A. Moore, et al.. The second Sandia Fracture Challenge : predictions of ductile failure under quasi-static and moderate-rate dynamic loading. International Journal of Fracture, 2016, 198, pp.5-100. ⟨10.1007/s10704-016-0089-7⟩. ⟨hal-01305640⟩
  • Judith Wollbrett-Blitz, Sébastien Joannès, Rémi Bruant, Christophe Le Clerc, Marc Romero de La Osa, et al.. Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing. Journal of Polymer Science Part B: Polymer Physics, 2016, 54 (3), pp.374-384. ⟨10.1002/polb.23763⟩. ⟨hal-01272319⟩
  • N. Vaissiere, Samuel Saada, K.H. Lee, M. Mermoux, Mohamed Sennour, et al.. Porous diamond foam with nanometric diamond grains using Bias Enhanced Nucleation on iridium. Diamond and Related Materials, 2016, 68, pp.23-27. ⟨10.1016/j.diamond.2016.04.009⟩. ⟨hal-01340054⟩
  • Ming Liu, Henry Proudhon. Finite element analysis of contact deformation regimes of an elastic-power plastic hardening sinusoidal asperity. Mechanics of Materials, 2016, 103, pp.78-86. ⟨10.1016/j.mechmat.2016.08.015⟩. ⟨hal-01417997⟩
  • Vladislav Yastrebov. Sliding without slipping under Coulomb friction : opening waves and inversion of frictional force. Tribology Letters, 2016, 62 (1), pp.1. ⟨10.1007/s11249-016-0650-6⟩. ⟨hal-01419628⟩
  • D. Steglich, X. Tian, Jacques Besson. Mechanism-based modelling of plastic deformation in magnesium alloys. European Journal of Mechanics - A/Solids, 2016, 55, pp.289-303. ⟨10.1016/j.euromechsol.2015.09.011⟩. ⟨hal-01251484⟩
  • André Pineau, David L. Mcdowell, Esteban P. Busso, Stephen D. Antolovich. Failure of metals II: Fatigue. Acta Biomaterialia, 2016, 107, pp.484-507. ⟨10.1016/j.actamat.2015.05.050⟩. ⟨hal-01308269⟩
  • Hicham Zaid, Marie-Hélène Berger, Denis Jalabert, M Walls, R Akrobetu, et al.. Atomic-resolved depth profile of strain and cation intermixing around LaAlO 3 /SrTiO 3 interfaces. Scientific Reports, 2016, 6, 28118, 13 p. ⟨10.1038/srep28118⟩. ⟨cea-01336337⟩
  • L. Mataveli Suave, J. Cormier, P. Villechaise, D. Bertheau, G. Benoit, et al.. Anisotropy in creep properties of DS200 + Hf alloy. Materials at High Temperatures, 2016, 33 (4-5), pp.361-371. ⟨10.1080/09603409.2016.1159836⟩. ⟨hal-01357825⟩
  • O. Bouaziz, J. P. Masse, G. Petitgand, M. X. Huang. A novel strong and ductile TWIP/martensite steel composite. Advanced Engineering Materials, 2016, 18 (1), pp.56-59. ⟨10.1002/adem.201500113⟩. ⟨hal-01269603⟩
  • Fanny Jambon, Loïc Marchetti, Mohamed Sennour, François Jomard, Jacques Chêne. SIMS and TEM investigation of hydrogen trapping on implantation defects in a nickel-based superalloy. Journal of Nuclear Materials, 2015, 466, pp.120-133. ⟨10.1016/j.jnucmat.2015.07.045⟩. ⟨hal-04161128⟩
  • Georges Cailletaud, Stéphane Quilici, Farida Azzouz, Jean-Louis Chaboche. A dangerous use of the fading memory term for non linear kinematic models at variable temperature. European Journal of Mechanics - A/Solids, 2015, 54, pp.24 - 29. ⟨10.1016/j.euromechsol.2015.06.007⟩. ⟨hal-04062103⟩
  • Enguerrand Couka, François Willot, Dominique Jeulin, Mona Ben Achour, Anthony Chesnaud, et al.. Modeling of the multiscale dispersion of nanoparticles in a hematite coating. Journal of Nanoscience and Nanotechnology, 2015, 15 (5), pp. 3515-3521(7). ⟨10.1166/jnn.2015.9855⟩. ⟨hal-00965908⟩
  • Meryem Bouchoucha, Frederik Tielens, Fabrice Gaslain, France Costatorro, Sandra Casale, et al.. Melanin Polymerization Held in Check: A Composite of Dihydroxyphenylalanine with Zeolite Beta. Journal of Physical Chemistry C, 2015, 119 (16), pp.8736-8747. ⟨10.1021/acs.jpcc.5b01194⟩. ⟨hal-02403166⟩
  • Pierre Sallot, Vincent Maurel, Luc Rémy, Franck N’guyen, Arnaud Longuet. Microstructure Evolution of a Platinum-Modified Nickel-Aluminide Coating During Thermal and Thermo-mechanical Fatigue. Metallurgical and Materials Transactions A, 2015, 46 (10), pp.4589-4600. ⟨10.1007/s11661-015-2857-9⟩. ⟨hal-04503993⟩
  • Vladimir Gantchenko, Jacques Renard, Alexander Olowinsky, Gerhard Otto. Strength characterization of assemblies of polymers, made by laser welding. Matériaux & Techniques, 2015, 103, 503, 8 p. ⟨10.1051/mattech/2015032⟩. ⟨hal-01236267⟩
  • M. Jeridi, Lucien Laiarinandrasana, Kacem Sai. Comparative study of continuum damage mechanics and Mechanics of Porous Media based on multi-mechanism model on Polyamide 6 semi-crystalline polymer. International Journal of Solids and Structures, 2015, 53, pp.12-27. ⟨10.1016/j.ijsolstr.2014.10.031⟩. ⟨hal-01101447⟩
  • D Vladikova, Z Stoynov, Anthony Chesnaud, Alain Thorel, M Viviani, et al.. Reversibility in monolithic dual membrane fuel cell. Bulgarian Chemical Communications, 2015, 47, pp.519-525. ⟨hal-01289748⟩
  • Sébastien Dezecot, Myriam Brochu. Microstructural characterization and high cycle fatigue behavior of investment cast A357 aluminum alloy. International Journal of Fatigue, 2015, 77, pp.154-159. ⟨10.1016/j.ijfatigue.2015.03.004⟩. ⟨hal-01160555⟩
  • H.Y. Chou, A.P. Mouritz, M.K. Bannister, Anthony R. Bunsell. Acoustic emission analysis of composite pressure vessels under constant and cyclic pressure. Composites Part A: Applied Science and Manufacturing, 2015, 70, pp.111-120. ⟨10.1016/j.compositesa.2014.11.027⟩. ⟨hal-01114460⟩
  • André Pineau, Stephen Antolovich. High temperature fatigue : behaviour of three typical classes of structural materials. Materials at High Temperatures, 2015, 32, pp.298-317. ⟨10.1179/0960340914Z.00000000072⟩. ⟨hal-01113993⟩
  • Nicolas Ranc, Antoine Blanche, David Ryckelynck, André Chrysochoos. POD preprocessing of IR thermal data to assess heat source distributions. Experimental Mechanics, 2015, 55, pp.725-739. ⟨10.1007/s11340-014-9858-2⟩. ⟨hal-01178213⟩
  • Robin J. Masurel, Sabine Cantournet, Alain Dequidt, Didier R. Long, Hélène Montes, et al.. Role of Dynamical Heterogeneities on the Viscoelastic Spectrum of Polymers: A Stochastic Continuum Mechanics Model. Macromolecules, 2015, 48 (18), pp.6690-6702. ⟨10.1021/acs.macromol.5b01138⟩. ⟨hal-01515628⟩
  • Fabien Bernachy-Barbe, Lionel Gelebart, Michel Bornert, Jérôme Crépin, Cédric Sauder. Characterization of SiC/SiC composites damage mechanisms using Digital Image Correlation at the tow scale. Composites Part A: Applied Science and Manufacturing, 2015, 68, pp.101-109. ⟨10.1016/j.compositesa.2014.09.021⟩. ⟨hal-01097822⟩
  • Tang Gu, Eveline Hervé-Luanco, Henry Proudhon, L. Thilly, J.-B. Dubois, et al.. Modélisation multi-échelle du comportement électrique de nano-composites Cu-Nb. Matériaux & Techniques, 2015, 103 (3), pp.9. ⟨10.1051/mattech/2015033⟩. ⟨hal-02145858⟩
  • Georges Kamgaing Somoh, Jacques Renard. Impact behaviour of carbon/polymer composites made by hot pressing moulding. Experimental and comparative study. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2015, 1, pp.69-87. ⟨10.3166/rcma.25.69-87⟩. ⟨hal-01236287⟩
  • Samuel Forest, Georges Cailletaud, David Ryckelynck. Le calcul intensif au service de la mécanique. Industries & Technologies, 2015, 981, pp.57-63. ⟨hal-01254706⟩
  • Anthony Marais, Matthieu Mazière, Samuel Forest, A. Parrot, Patrick Le Delliou. Influence of static strain aging on the cleavage fracture of a C–Mn steel. Engineering Fracture Mechanics, 2015, 141, pp.95-110. ⟨10.1016/j.engfracmech.2015.04.035⟩. ⟨hal-01165657⟩
  • Béatrice Schaack, Liu Wei, Alain Thiéry, Aurélien Auger, Jean-François Hochepied, et al.. Design of a live biochip for in situ nanotoxicology studies : a proof of concept. RSC Advances, 2015, 5 (100), pp.82169-82178. ⟨10.1039/C5RA16960G⟩. ⟨hal-01241173⟩
  • Alain Thionnet, H.Y. Chou, Anthony R. Bunsell. Fibre break failure processes in unidirectional composites. Part 2: Failure and critical damage state induced by sustained tensile loading. Applied Composite Materials, 2015, 22, pp.141-155. ⟨10.1007/s10443-014-9398-z⟩. ⟨hal-01144505⟩
  • S. Agnelli, F. Baldi, B.R.K. Blackman, L. Castellani, P.M. Frontini, et al.. Application of the load separation criterion in J-testing of ductile polymers: A round-robin testing exercise. Polymer Testing, 2015, 44, pp.72-81. ⟨10.1016/j.polymertesting.2015.03.019⟩. ⟨hal-01165294⟩
  • Géraldine Wolinne, Céline Harnisch, Eva Heripre, Sylvie Ruch, Armando Salito, et al.. Mechanical study of novel VPS-titanium coating on polyethylene substrates. Journal of Thermal Spray Technology, 2015, 24, pp.206-214. ⟨10.1007/s11666-014-0191-1⟩. ⟨hal-01113516⟩
  • Anthony R. Bunsell, Alain Thionnet. Failure processes governing long term reliability of carbon fibre composites structures. Composites and Nanostructures, 2015, 7, pp.216-224. ⟨hal-01305658⟩
  • Pierre Sallot, Vincent Maurel, Luc Rémy, Franck N'Guyen, Arnaud Longuet. Microstructure evolution of a platinum-modified nickel-aluminide coating during thermal and thermo-mechanical fatigue. Metallurgical and Materials Transactions A, 2015, 46, pp.4589-4600. ⟨10.1007/s11661-015-2857-9⟩. ⟨hal-01199565⟩
  • Julie Lorthios, Matthieu Mazière, Xavier Lemoine, Philippe Cugy, Jacques Besson, et al.. Fracture behaviour of a Fe–22Mn–0.6C–0.2V austenitic TWIP steel. International Journal of Mechanical Sciences, 2015, 101-102, pp.99-113. ⟨10.1016/j.ijmecsci.2015.07.029⟩. ⟨hal-01199574⟩
  • Gilles Rousselier, Stéphane Quilici. Combining porous plasticity with Coulomb and Portevin-Le Chatelier models for ductile fracture analyses. International Journal of Plasticity, 2015, 69, pp.118-133. ⟨10.1016/j.ijplas.2015.02.008⟩. ⟨hal-01149852⟩
  • David Ryckelynck, Laurent Gallimard, Samuel Jules. Estimation of the validity domain of hyper-reduction approximations in generalized standard elastoviscoplasticity. Advanced Modeling and Simulation in Engineering Sciences, 2015, 2 (1), 19 p. ⟨10.1186/s40323-015-0027-7⟩. ⟨hal-01237733⟩
  • André Pineau. Crossing grain boundaries in metals by slip bands, cleavage and fatigue cracks. Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015, 373, pp.20140131. ⟨10.1098/rsta.2014.0131⟩. ⟨hal-01131024⟩
  • Georges Cailletaud, Stéphane Quilici, Farida Azzouz, Jean Louis Chaboche. A dangerous use of the fading memory term for non linear kinematic models at variable temperature. European Journal of Mechanics - A/Solids, 2015, 54, pp.24-29. ⟨10.1016/j.euromechsol.2015.06.007⟩. ⟨hal-01183382⟩
  • Camille Chateau, L. Gélébart, Michel Bornert, Jérôme Crépin. Micromechanical modeling of the elastic behavior of unidirectional CVI SiC/SiC composites. International Journal of Solids and Structures, 2015, 58, pp.322-334. ⟨10.1016/j.ijsolstr.2014.11.020⟩. ⟨hal-01120398⟩
  • Matthieu Le Saux, Jacques Besson, Sébastien Carassou. A model to describe the mechanical behavior and the ductile failure of hydrided Zircaloy-4 fuel claddings between 25 °C and 480 °C. Journal of Nuclear Materials, 2015, 466, pp.43-55. ⟨10.1016/j.jnucmat.2015.07.026⟩. ⟨hal-01199626⟩
  • Michel Jeandin, François Borit, Nicole Fabregue, Gilles Rolland, Francesco Delloro. Approche artistique de la projection thermique. Traitements & Matériaux, 2015, 436, pp.25-32. ⟨hal-01251474⟩
  • Alain Thionnet, H.Y. Chou, Anthony R. Bunsell. Fibre break failure processes in unidirectional composites. Part 1: Failure and critical damage state induced by increasing tensile loading. Applied Composite Materials, 2015, 22, pp.119-140. ⟨10.1007/s10443-014-9397-0⟩. ⟨hal-01144501⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Anne-Françoise Gourgues-Lorenzon. Fatigue lifetime and tearing resistance of AA2198 Al-Cu-Li alloy friction stir welds: fffect of defects. International Journal of Fatigue, 2015, 70, pp.463-472. ⟨10.1016/j.ijfatigue.2014.07.001⟩. ⟨hal-01102466⟩
  • Georges Kamgaing Somoh, Rim Ben Toumi, Jacques Renard, M. Monin. Statistical approach of elastic properties of continuous fiber composite. Composite Structures, 2015, 119, pp.287-297. ⟨10.1016/j.compstruct.2014.08.039⟩. ⟨hal-01113698⟩
  • Kostoula I. Triantou, Dimitris I. Pantelis, Vincent Guipont, Michel Jeandin. Microstructure and tribological behavior of copper and composite copper+alumina cold sprayed coatings for various alumina contents. Wear, 2015, 336-337, pp.96-107. ⟨10.1016/j.wear.2015.05.003⟩. ⟨hal-01165599⟩
  • Thomas Maurer, Joseph Marae Djouda, Ugo Cataldi, Arthur Gontier, Guillaume Montay, et al.. The beginnings of plasmomechanics : towards plasmonic strain sensors. Frontiers of Materials Science in China, 2015, 9 (2), pp.170-177. ⟨10.1007/s11706-015-0290-z⟩. ⟨hal-01286265⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. From infinitesimal to full contact between rough surfaces: Evolution of the contact area. International Journal of Solids and Structures, 2015, 52, pp.83-102. ⟨10.1016/j.ijsolstr.2014.09.019⟩. ⟨hal-01113725⟩
  • Stéphanie Basseville, Georges Cailletaud. An evaluation of the competition between wear and crack initiation in fretting conditions for Ti–6Al–4V alloy. Wear, 2015, 328-329, pp.443-455. ⟨10.1016/j.wear.2015.03.010⟩. ⟨hal-01163316⟩
  • Fabien Bernachy-Barbe, Lionel Gelebart, Michel Bornert, Jérôme Crépin, Cédric Sauder. Anisotropic damage behavior of SiC/SiC composite tubes: Multiaxial testing and damage characterization. Composites Part A: Applied Science and Manufacturing, 2015, 76, pp.281-288. ⟨10.1016/j.compositesa.2015.04.022⟩. ⟨hal-01183363⟩
  • Baramee Patamaprohm, Pongsak Nimdum, Jacques Renard. Probabilistic multiscale approach for carbon fibre/epoxy composites. Application on type IV composite pressure vessels . Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2015, 25 (3-4), pp.327-372. ⟨10.3166/rcma.25.327-372⟩. ⟨hal-01286357⟩
  • Alain Thionnet, H.Y. Chou, Anthony R. Bunsell. Fibre break failure processes in unidirectional composites. Part 3: Unidirectional plies included in laminates. Applied Composite Materials, 2015, 22, pp.157-169. ⟨10.1007/s10443-014-9399-y⟩. ⟨hal-01144508⟩
  • Erembert Nizery, Jean-Yves Buffiere, Henry Proudhon, Peter Cloetens, Thilo F. Morgeneyer, et al.. Three-dimensional characterization of fatigue-relevant intermetallic particles in high-strength aluminium alloys using synchrotron X-ray nanotomography. Philosophical Magazine, 2015, 95, pp.2731-2746. ⟨10.1080/14786435.2015.1076940⟩. ⟨hal-01237840⟩
  • Alexandre Iltchev, Vincent Marcadon, S. Kruch, Samuel Forest. Computational homogenisation of periodic cellular materials: Application to structural modelling. International Journal of Mechanical Sciences, 2015, 93, pp.240-255. ⟨10.1016/j.ijmecsci.2015.02.007⟩. ⟨hal-01149848⟩
  • Rana Nicolas, Gaëtan Lévêque, Joseph Marae Djouda, Guillaume Montay, Yazid Madi, et al.. Plasmonic mode interferences and Fano resonances in Metal-Insulator-Metal nanostructured interface OPEN. Scientific Reports, 2015, 5, 14419, 11 p. ⟨10.1038/srep14419⟩. ⟨hal-01237837⟩
  • Trong-Son Cao, Matthieu Mazière, K. Danas, Jacques Besson. A model for ductile damage prediction at low stress triaxialities incorporating void shape change and void rotation. International Journal of Solids and Structures, 2015, 63, pp.240-263. ⟨10.1016/j.ijsolstr.2015.03.003⟩. ⟨hal-01165304⟩
  • Anthony Chesnaud, Marc David Braida, Sonia Estradé, Francesca Peiro, A. Tarancon, et al.. High-temperature anion and proton conduction in RE3NbO7 (RE = La, Gd, Y, Yb, Lu) compounds. Journal of the European Ceramic Society, 2015, 35, pp.3051-3061. ⟨10.1016/j.jeurceramsoc.2015.04.014⟩. ⟨hal-01180113⟩
  • Lucien Laiarinandrasana, Jonathan Ricard, Fabrice Guigné, Yin Cheng, Thilo F. Morgeneyer, et al.. Damage based model to study the effect of notch introduction technique on the J-integral value of PolyOxyMethylene. Engineering Fracture Mechanics, 2015, 149, pp.214-229. ⟨10.1016/j.engfracmech.2015.08.031⟩. ⟨hal-01272301⟩
  • Fanny Jambon, Loic Marchetti, Mohamed Sennour, François Jomard, Jacques Chene. SIMS and TEM investigation of hydrogen trapping on implantation defects in a nickel-based superalloy. Journal of Nuclear Materials, 2015, 466, pp.120-133. ⟨10.1016/j.jnucmat.2015.07.045⟩. ⟨hal-01199632⟩
  • Sinisa Dj. Mesarovic, Samuel Forest, Jovo P. Jaric. Size-dependent energy in crystal plasticity and continuum dislocation models. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences, 2015, 471 (n° 2175), 20140868, 19 p. ⟨10.1098/rspa.2014.0868⟩. ⟨hal-01131017⟩
  • Stephan Wulfinghoff, Samuel Forest, Thomas Bohlke. Strain gradient plasticity modeling of the cyclic behavior of laminate microstructures. Journal of the Mechanics and Physics of Solids, 2015, 79, pp.1-20. ⟨10.1016/j.jmps.2015.02.008⟩. ⟨hal-01149855⟩
  • Pongsak Nimdum, B. Patamaprohm, Jacques Renard, Stéphane Villalonga. Experimental method and numerical simulation demonstrate non-linear axial behaviour in composite filament wound pressure vessel due to thermal expansion effect. International Journal of Hydrogen Energy, 2015, 40, pp.13231-13241. ⟨10.1016/j.ijhydene.2015.05.068⟩. ⟨hal-01199636⟩
  • Aurélien Villani, Esteban P Busso, Samuel Forest. Field theory and diffusion creep predictions in polycrystalline aggregates. Modelling and Simulation in Materials Science and Engineering, 2015, 23, 055006, 24 p. ⟨10.1088/0965-0393/23/5/055006⟩. ⟨hal-01180120⟩
  • Vladimir Gantchenko, Jacques Renard. Characterization of welded polymer assemblies. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2015, 25 (3-4), pp.407-418. ⟨10.3166/rcma.25.1-12⟩. ⟨hal-01286277⟩
  • Housam Eidi, Marie-Odile David, Guillemette Crépeaux, Laetitia Henry, Vandana Joshi, et al.. Fluorescent nanodiamonds as a relevant tag for the assessment of alum adjuvant particle biodisposition. BMC Medicine, 2015, 13 (144), 13 p. ⟨10.1186/s12916-015-0388-2⟩. ⟨hal-01183373⟩
  • Sylvia Feld-Payet, Vincent Chiaruttini, Jacques Besson, Frédéric Feyel. A new marching ridges algorithm for crack path tracking in regularized media. International Journal of Solids and Structures, 2015, 71, pp.57-69. ⟨10.1016/j.ijsolstr.2015.04.043⟩. ⟨hal-01199601⟩
  • Mickael Wehbi, Thierry Couvant, Cecilie Duhamel, Jérôme Crépin. Oxidation of nickel-base welds 182 and 82 in simulated primary water of pressurised water reactors. Materials at High Temperatures, 2015, 32, pp.1-9. ⟨10.1179/1878641314Y.0000000031⟩. ⟨hal-01113997⟩
  • Matthieu Mazière, Samuel Forest. Strain gradient plasticity modeling and finite element simulation of Lüders band formation and propagation. Continuum Mechanics and Thermodynamics, 2015, 27, pp.83-104. ⟨10.1007/s00161-013-0331-8⟩. ⟨hal-01114480⟩
  • Matthieu Mazière, Q. Pujol d'Andrebo. Portevin–Le Chatelier effect under cyclic loading: experimental and numerical investigations. Philosophical Magazine, 2015, 95, pp.3257-3277. ⟨10.1080/14786435.2015.1049236⟩. ⟨hal-01251499⟩
  • Jean Denape, Christophe Colin, J.-Y. Paris, M. Yahiaoui, Olivier Ther, et al.. Wear mechanisms of WC-Co drill bit inserts against alumina counterface under dry friction: Part 2 — Graded WC-Co inserts. International Journal of Refractory Metals and Hard Materials, 2015, 48, pp.65-73. ⟨10.1016/j.ijrmhm.2014.07.024⟩. ⟨hal-01078778⟩
  • Rémi Martinez, D. Larouche, Georges Cailletaud, Ivan Guillot, D. Massinon. Simulation of the concomitant process of nucleation-growth-coarsening of Al2Cu particles in a 319 foundry aluminum alloy. Modelling and Simulation in Materials Science and Engineering, 2015, 23, 045012, 22 p. ⟨10.1088/0965-0393/23/4/045012⟩. ⟨hal-01165668⟩
  • Agathe Figarol, Jérémie Pourchez, Delphine Boudard, Valérie Forest, Sarah Berhanu, et al.. Thermal annealing of carbon nanotubes reveals a strong toxicological impact of the structural defects. Journal of Nanoparticle Research, 2015, 17 (4), pp.article 194. ⟨10.1007/s11051-015-2999-0⟩. ⟨emse-01148477v2⟩
  • Jean-Charles Arnault, Tristan Petit, Hugues Girard, Céline Gesset, Mathilde Combis-Schlumberger, et al.. Surface graphitization of ozone-treated detonation nanodiamonds. physica status solidi (a), 2014, 211 (12), pp.2739-2743. ⟨10.1002/pssa.201431397⟩. ⟨hal-01102477⟩
  • I. Jouanny, Mohamed Sennour, Marie-Hélène Berger, V.B. Filipov, A. Ievdokymova, et al.. Effect of Zr substitution by Ti on growth direction and interface structure of LaB6–Ti Zr1−B2 directionally solidified eutectics. Journal of the European Ceramic Society, 2014, 34 (9), pp.2101-2109. ⟨10.1016/j.jeurceramsoc.2014.01.026⟩. ⟨hal-04161109⟩
  • Hai-Lin Zhang, Yi Zang, Juan Xie, Jia Li, Guo-Rong Chen, et al.. A ‘Clicked’ Tetrameric Hydroxamic Acid Glycopeptidomimetic Antagonizes Sugar-Lectin Interactions On The Cellular Level. Scientific Reports, 2014, 4 (1), ⟨10.1038/srep05513⟩. ⟨hal-04347030⟩
  • Jerome Rossignol, Alain Thionnet. Damage in Composite Material: A Microwave Detection. Key Engineering Materials, 2014, 605, pp.303-305. ⟨10.4028/www.scientific.net/KEM.605.303⟩. ⟨hal-03998877⟩
  • A.L. Rouffié, J. Crépin, Mohamed Sennour, B. Tanguy, A. Pineau, et al.. Effect of the thermal ageing on the tensile and impact properties of a 18%Cr ODS ferritic steel. Journal of Nuclear Materials, 2014, 445 (1-3), pp.37-42. ⟨10.1016/j.jnucmat.2013.10.030⟩. ⟨hal-04161207⟩
  • Arthur Hellouin de Menibus, Quentin Auzoux, Jacques Besson, Jérôme Crépin. Temperature increase of Zircaloy-4 cladding tubes due to plastic heat dissipation during tensile tests at 0.1-10 s−1 strain rates. Journal of Nuclear Materials, 2014, 454 (1-3), pp.247-254. ⟨hal-01059360⟩
  • Chahid Benaqqa, Moussa Gomina, Arnaud Beurotte, Michel Boussuge, Benoit Delattre, et al.. Morphology, physical, thermal and mechanical properties of the constitutive materials of diesel particulate filters. Applied Thermal Engineering, 2014, 62, pp.599-606. ⟨10.1016/j.applthermaleng.2013.10.024⟩. ⟨hal-00904377⟩
  • Aurélien Villani, Esteban P. Busso, Kais Ammar, Samuel Forest, M.G.D. Geers. A fully coupled diffusional-mechanical formulation: numerical implementation, analytical validation, and effects of plasticity on equilibrium. Archive of Applied Mechanics, 2014, 84, pp.1647-1664. ⟨10.1007/s00419-014-0860-z⟩. ⟨hal-01098194⟩
  • N. Garcia-Rodriguez, M. Campos, J.M. Torralba, Marie-Hélène Berger, Yves Bienvenu. Capability of mechanical alloying and SPS technique to develop nanostructured high Cr, Al alloyed ODS steels. Materials Science and Technology, 2014, 30, pp.1676-1684. ⟨10.1179/1743284714Y.0000000595⟩. ⟨hal-01078643⟩
  • Ming Liu. Finite element analysis of large contact deformation of an elastic–plastic sinusoidal asperity and a rigid flat. International Journal of Solids and Structures, 2014, 51 (21-22), pp.3642-3652. ⟨10.1016/j.ijsolstr.2014.06.026⟩. ⟨hal-01078650⟩
  • Valérie Forest, Mélanie Pailleux, Jérémie Pourchez, Delphine Boudard, Maura Tomatis, et al.. Toxicity of boehmite nanoparticles: impact of the ultrafine fraction and of the agglomerates size on cytotoxicity and pro-inflammatory response. Inhalation Toxicology, 2014, 26 (9), pp.545-553. ⟨10.3109/08958378.2014.925993⟩. ⟨hal-01020274⟩
  • Jia Li, Samuel Forest, Vincent Chiaruttini, A. Roos, Henry Proudhon. Crystal plasticity finite element simulation of crack growth in single crystals. Computational Materials Science, 2014, 94, pp.191-197. ⟨10.1016/j.commatsci.2014.03.061⟩. ⟨hal-01078756⟩
  • Jonathan Ricard, Fabrice Guigné, Lucien Laiarinandrasana. Damage and fracture mechanisms of polyoxymethylene : multiscale experimental study and finite element modeling. Engineering Fracture Mechanics, 2014, 115, pp.270-283. ⟨10.1016/j.engfracmech.2013.11.011⟩. ⟨hal-00942920⟩
  • Sébastien Joannès. A micromechanical damage characterization and the modeling of a mineral filled epoxy adhesive. Mechanics of Materials, 2014, 75, pp.111-124. ⟨10.1016/j.mechmat.2014.04.009⟩. ⟨hal-00509616⟩
  • Vladimir A. Esin, Youssef Souhar. Solvent grain boundary diffusion in binary solid solutions : a new approach to evaluate solute grain boundary segregation. Philosophical Magazine, 2014, 94 (35), pp.4066-4079. ⟨10.1080/14786435.2014.980043⟩. ⟨hal-01501796⟩
  • Sabine Cantournet, Khaled Layouni, Lucien Laiarinandrasana, Roland Piques. Experimental investigation and modelling of compressibility induced by damage in carbon black-reinforced natural rubber. Comptes Rendus Mécanique, 2014, 342, pp.299-310. ⟨10.1016/j.crme.2014.02.005⟩. ⟨hal-00148574⟩
  • Albrecht Bertram, Samuel Forest. The thermodynamics of gradient elastoplasticity. Continuum Mechanics and Thermodynamics, 2014, 26, pp.269-286. ⟨10.1007/s00161-013-0300-2⟩. ⟨hal-00523291⟩
  • Sébastien Joannès, Laurent Mazé, Anthony R. Bunsell. A concentration-dependent diffusion coefficient model for water sorption in composite. Composite Structures, 2014, 108, pp.111-118. ⟨10.1016/j.compstruct.2013.09.007⟩. ⟨hal-00904085⟩
  • Thilo F. Morgeneyer, Henry Proudhon, Peter Cloetens, Wolfgang Ludwig, Quentin Roirand, et al.. Nanovoid morphology and distribution in deformed HDPE studied by magnified synchrotron radiation holotomography. Polymer, 2014, 55, pp.6439-6443. ⟨10.1016/j.polymer.2014.10.022⟩. ⟨hal-01102339⟩
  • Lakhdar Taleb, Georges Cailletaud, Kacem Sai. Experimental and numerical analysis about the cyclic behavior of the 304L and 316L stainless steels at 350 °C. International Journal of Plasticity, 2014, 61, pp.32-48. ⟨10.1016/j.ijplas.2014.05.006⟩. ⟨hal-01053633⟩
  • Camille Chateau, Lionel Gélébart, Michel Bornert, Jérôme Crépin, Daniel Caldemaison, et al.. Modeling of damage in unidirectional ceramic matrix composites and multi-scale experimental validation on third generation SiC/SiC minicomposites. Journal of the Mechanics and Physics of Solids, 2014, 63, pp.298-319. ⟨10.1016/j.jmps.2013.09.001⟩. ⟨hal-00903466⟩
  • D.S. Kammer, Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. The existence of a critical length scale in regularised friction. Journal of the Mechanics and Physics of Solids, 2014, 63, pp.40-50. ⟨10.1016/j.jmps.2013.10.007⟩. ⟨hal-00941790⟩
  • Abderrahmen Kaabi, Yves Bienvenu, David Ryckelynck, Bertrand Pierre. Architectured materials to improve the reliability of power electronics modules : substrate and lead-free solder. Journal of Electronic Materials, 2014, 43, pp.648-657. ⟨10.1007/s11664-013-2662-4⟩. ⟨hal-00955777⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, M. Arafin, Steven Cooreman, et al.. Delamination of pipeline steels : determination of an anisotropic cleavage criterion. Mechanics & Industry, 2014, 15, pp.45-50. ⟨10.1051/meca/2014001⟩. ⟨hal-01055448⟩
  • Ming Liu, Henry Proudhon. Finite element analysis of frictionless contact between a sinusoidal asperity and a rigid plane: Elastic and initially plastic deformations. Mechanics of Materials, 2014, 77, pp.125-141. ⟨10.1016/j.mechmat.2014.06.009⟩. ⟨hal-01055452⟩
  • Marion Chieux, Cecilie Duhamel, Régine Molins, Luc Rémy, Jean Yves Guedou. Effect of the superalloy composition on the isothermal oxidation behaviour of TBC systems. Oxidation of Metals, 2014, 81, pp.57-67. ⟨10.1007/s11085-013-9418-7⟩. ⟨hal-00950477⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin. Towards gigantic RVE sizes for 3D stochastic fibrous networks. International Journal of Solids and Structures, 2014, 51 (2), pp.359-376. ⟨10.1016/j.ijsolstr.2013.10.011⟩. ⟨hal-00931281⟩
  • Kacem Sai, Lakhdar Taleb, Fethi Guesmi, Georges Cailletaud. Multi-mechanism modeling of proportional and non-proportional ratchetting of stainless steel 304. Acta Mechanica, 2014, 225, pp.3265-3283. ⟨10.1007/s00707-014-1108-2⟩. ⟨hal-01098205⟩
  • Thierry Delahaye, Ali Al-Zein, Marie-Hélène Berger, Xavier Bril, Jean-François Hochepied. Hydrothermal synthesis of ferroelectric mixed potassium niobate-lead titanate nanoparticles. Journal of the American Ceramic Society, 2014, 97, pp.1-9. ⟨10.1111/jace.12778⟩. ⟨hal-00462410⟩
  • Julien Parmentier, Fabrice Gaslain, Ovidiu Ersen, Teresa A. Centeno, Leonid A. Solovyov. Structure and sorption properties of a zeolite-templated carbon with the EMT structure type. Langmuir, 2014, 30, pp.297-307. ⟨10.1021/la402762v⟩. ⟨hal-00950428⟩
  • Isabelle Jouanny, Mohamed Sennour, Marie-Hélène Berger, V.B. Filipov, A. Ievdokymova, et al.. Effect of Zr substitution by Ti on growth direction and interface structure of LaB6-TixZr1−xB2 directionally solidified eutectics. Journal of the European Ceramic Society, 2014, 34, pp.2101-2109. ⟨10.1016/j.jeurceramsoc.2014.01.026⟩. ⟨hal-00990615⟩
  • Mamadou Abdoul Mbacke, Jacques Renard, Alain Thionnet, J.P. Mattei. Prédiction du comportement mécanique et étude de l’endommagement d’un composite tressé 3D par une analyse multiéchelle. Application à la conception de réservoirs pour véhicules GNV. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2014, 24 (3), pp.319-339 ⟨10.3166/rcma.24.319-339⟩. ⟨hal-01503796⟩
  • M.G.D. Geers, M. Cottura, Benoit Appolaire, Esteban P. Busso, Samuel Forest, et al.. Coupled glide-climb diffusion-enhanced crystal plasticity. Journal of the Mechanics and Physics of Solids, 2014, 70, pp.136-153. ⟨10.1016/j.jmps.2014.05.007⟩. ⟨hal-01056876⟩
  • Claudio Nigro, Lingtao Sun, Jean Meriaux, Henry Proudhon. Microstructural simulations of the initiation and propagation of short fretting cracks in a Ti-6Al-4V contact. Tribology International, 2014, 74, pp.103-109. ⟨10.1016/j.triboint.2014.01.024⟩. ⟨hal-00966174⟩
  • Yves Bienvenu. Application and future of solid foams. Comptes Rendus. Physique, 2014, 15, pp.719-730. ⟨10.1016/j.crhy.2014.09.006⟩. ⟨hal-01102334⟩
  • Lucien Laiarinandrasana, Clémence Devilliers, Jean Marc Lucatelli, Emmanuelle Gaudichet-Maurin, Jean Michel Brossard. Experimental study of the crack depth ratio threshold to analyze the slow crack growth by creep of high density polyethylene pipes. International Journal of Pressure Vessels and Piping, 2014, 122, pp.22-30. ⟨10.1016/j.ijpvp.2014.07.002⟩. ⟨hal-01078760⟩
  • Michel Jeandin, Gilles Rolland, Laure Line Descurninges, Marie-Hélène Berger. Which powders for cold spray ?. Surface Engineering, 2014, 30, pp.291-298. ⟨10.1179/1743294414Y.0000000253⟩. ⟨hal-00359163⟩
  • Thibault Taillandier-Thomas, Stéphane Roux, Thilo F. Morgeneyer, François Hild. Localized strain field measurement on laminography data with mechanical regularization. Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2014, 324, pp.70-79. ⟨10.1016/j.nimb.2013.09.033⟩. ⟨hal-00956440⟩
  • Michelle Menezes de Oliveira, Marcia Maria Fernandes, Maria Gardennia Fonseca, Edson Cavalcanti da Silva Filho, Antonio Gouveia de Souza, et al.. Direct grafting of ethylene sulfide onto silicic acid magadiite. Microporous and Mesoporous Materials, 2014, 196, pp.292-299. ⟨10.1016/j.micromeso.2014.05.010⟩. ⟨hal-01018650⟩
  • Alain Thionnet, H.Y. Chou, Anthony R. Bunsell. Fibre break processes in unidirectional composites. Composites Part A: Applied Science and Manufacturing, 2014, 65, pp.148-160. ⟨10.1016/j.compositesa.2014.06.009⟩. ⟨hal-01056421⟩
  • Kais Ammar, Benoît Appolaire, Samuel Forest, Maeva Cottura, Yann Le Bouar, et al.. Modelling inheritance of plastic deformation during migration of phase boundaries using a phase field method. Meccanica, 2014, 49, pp.2699-2717. ⟨10.1007/s11012-014-0011-1⟩. ⟨hal-01098186⟩
  • Meng Luo, Gilles Rousselier. Modeling of large strain multi-axial deformation of anisotropic metal sheets with strength-differential effect using a Reduced Texture Methodology. International Journal of Plasticity, 2014, 53, pp.66-89. ⟨10.1016/j.ijplas.2013.07.006⟩. ⟨hal-00942623⟩
  • Daria Vladikova, Zdravko Stoynov, Anthony Chesnaud, Alain Thorel, Massimo Viviani, et al.. Application of yttrium doped barium cerate for improvement of the dual membrane SOFC design. International Journal of Hydrogen Energy, 2014, 39, pp.21561-21568. ⟨10.1016/j.ijhydene.2014.09.014⟩. ⟨hal-01102412⟩
  • Luc Rémy, Catherine Guerre, Isabelle Rouzou, Régine Molins. Assessment of TBC oxidation-induced degradation using compression tests. Oxidation of Metals, 2014, 81, pp.3-15. ⟨10.1007/s11085-013-9416-9⟩. ⟨hal-00950532⟩
  • Eveline Hervé-Luanco. Elastic behavior of composites containing multi-layer coated particles with imperfect interface bonding conditions and application to size effects and mismatch in these composites. International Journal of Solids and Structures, 2014, 51 (15-16), pp.2865-2877. ⟨10.1016/j.ijsolstr.2014.04.008⟩. ⟨hal-00359166⟩
  • Anthony R. Bunsell, H.Y. Chou, Alain Thionnet. Intrinsic safety factors for glass & carbon fibre composite filament wound structures. Applied Composite Materials, 2014, 21, pp.107-121. ⟨10.1007/s10443-013-9367-y⟩. ⟨hal-00990532⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. The contact of elastic regular wavy surfaces revisited. Tribology Letters, 2014, 56, pp.171-183. ⟨10.1007/s11249-014-0395-z⟩. ⟨hal-01083586⟩
  • Laurent Peigat, Magali Reytier, F. Ledrappier, Jacques Besson. A leakage model to design seals for solid oxide fuel and electrolyser cell stacks. International Journal of Hydrogen Energy, 2014, 39, pp.7109-7119. ⟨10.1016/j.ijhydene.2014.02.097⟩. ⟨hal-00985476⟩
  • Toshiyuki Ueda, Lukas Helfen, Thilo F. Morgeneyer. In situ laminography study of three-dimensional individual void shape evolution at crack initiation and comparison with Gurson-Tvergaard-Needleman-type simulations. Acta Materialia, 2014, 78, pp.254-270. ⟨10.1016/j.actamat.2014.06.029⟩. ⟨hal-01056836⟩
  • Vincent Maurel, Esteban P. Busso, Julien Frachon, Jacques Besson, Franck N'Guyen. A methodology to model the complex morphology of rough interfaces. International Journal of Solids and Structures, 2014, 51 (19-20), pp.3293-3302. ⟨10.1016/j.ijsolstr.2014.04.015⟩. ⟨hal-01083592⟩
  • Damien Colas, E. Finot, Sylvain Flouriot, Samuel Forest, Matthieu Mazière, et al.. Investigation and modeling of the anomalous yield point phenomenon in pure tantalum. Materials Science and Engineering: A, 2014, 615, pp.283-295. ⟨10.1016/j.msea.2014.07.028⟩. ⟨hal-01070197⟩
  • Alexandre Pichavant, Élise Provost, Marie-Hélène Berger, Walter Fürst, Jean-François Hochepied. Interfaced titanium dioxide anatase–rutile nanocomposites by thermohydrolysis in presence of small amounts of Sn(IV) and their photocatalytic properties. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 462, pp.64-68. ⟨10.1016/j.colsurfa.2014.08.025⟩. ⟨hal-01082906⟩
  • Anne Laure Rouffié, Jérôme Crépin, Mohamed Sennour, Benoit Tanguy, André Pineau, et al.. Effect of the thermal ageing on the tensile and impact properties of a 18%Cr ODS ferritic steel. Journal of Nuclear Materials, 2014, 445, pp.37-42. ⟨10.1016/j.jnucmat.2013.10.030⟩. ⟨hal-00926575⟩
  • Vladimir A. Esin, B. Denand, Quentin Le Bihan, Moukrane Dehmas, Julien Teixeira, et al.. In situ synchrotron X-ray diffraction and dilatometric study of austenite formation in a multi-component steel: Influence of initial microstructure and heating rate. Acta Materialia, 2014, 80, pp.118-131. ⟨10.1016/j.actamat.2014.07.042⟩. ⟨hal-01078661⟩
  • Judith Wollbrett-Blitz, Anthony R. Bunsell, Jean Louis Halary, Sébastien Joannès, Alba Marcellan. Vers de nouvelles applications pour les fibres aramides. L'Actualité Chimique, 2014, 390, pp.25-27. ⟨hal-01102367⟩
  • Caroline Guinard, Guillaume Montay, Vincent Guipont, Michel Jeandin, Jérémie Girardot, et al.. Residual Stress Analysis of Laser-Drilled Thermal Barrier Coatings Involving Various Bond Coats. Journal of Thermal Spray Technology, 2014, 24, pp.252-262. ⟨10.1007/s11666-014-0185-z⟩. ⟨hal-01174675v2⟩
  • M. Chouman, Anais Gaubert, Jean Louis Chaboche, Pascale Kanoute, Georges Cailletaud, et al.. Elastic-viscoplastic notch correction methods. International Journal of Solids and Structures, 2014, 51 (18), pp.3025-3041. ⟨10.1016/j.ijsolstr.2014.04.017⟩. ⟨hal-01056889⟩
  • De-Tai Shi, Xiao-Li Wei, Yayun Sheng, Yi Zang, Xiao-Peng He, et al.. Substitution Pattern Reverses the Fluorescence Response of Coumarin Glycoligands upon Coordination with Silver (I). SCIENTIFIC REPORTS, 2014, ⟨10.1038/srep04252⟩. ⟨hal-04347027⟩
  • Arthur Hellouin de Menibus, Quentin Auzoux, Ousmane Dieye, Pascal Berger, Sophie Bosonnet, et al.. Formation and characterization of hydride blisters in Zircaloy 4 cladding tubes. Journal of Nuclear Materials, 2014, 449, pp.132-147. ⟨10.1016/j.jnucmat.2014.03.006⟩. ⟨hal-00980723⟩
  • Anh-Tuan Ta, Frédéric Holweck, Nadia Labed, Alain Thionnet, François Peyraut. A constructive approach of invariants of behavior laws with respect to an infinite symmetry group – Application to a biological anisotropic hyperelastic material with one fiber family. International Journal of Solids and Structures, 2014, 51 (21-22), pp.3579-3588. ⟨10.1016/j.ijsolstr.2014.06.019⟩. ⟨hal-01078771⟩
  • Guillaume Martin, N. Ochoa, Kacem Sai, Eveline Hervé-Luanco, Georges Cailletaud. A multiscale model for the elastoviscoplastic behavior of Directionally Solidified alloys: Application to FE structural computations. International Journal of Solids and Structures, 2014, 51 (5), pp.1175-1187. ⟨10.1016/j.ijsolstr.2013.12.013⟩. ⟨hal-00950570⟩
  • Abderrahmen Kaabi, Yves Bienvenu, David Ryckelynck, Laurent Prevond, B. Pierre. Architectured bimetallic laminates by roll bonding : bonding mechanisms and applications. Materials Science and Technology, 2014, 30, pp.782-790. ⟨10.1179/1743284713Y.0000000412⟩. ⟨hal-00359128⟩
  • G. Srinivasulu, P. Ghosal, N. Singh, Loic Nazé, T.K. Nandy, et al.. Monotonic and low cycle fatigue behavior of an O+B2 alloy at high temperatures. Materials Science and Engineering: A, 2014, 599, pp.268-278. ⟨10.1016/j.msea.2014.01.086⟩. ⟨hal-00955744⟩
  • Komlanvi Lampoh, Isabelle Charpentier, El Mostapha Daya. Eigenmode sensitivity of damped sandwich structures. Comptes Rendus Mécanique, 2014, 342, pp.700-705. ⟨10.1016/j.crme.2014.08.001⟩. ⟨hal-01097820⟩
  • Jean-Philippe Masse, Bechir Chehab, Hatem Zurob, David Embury, Xian Wang, et al.. An original way for producing a 2.4 GPa strength ductile steel by rolling of martensite. ISIJ international, 2014, 54, pp.235-239. ⟨10.2355/isijinternational.54.235⟩. ⟨hal-01097810⟩
  • Vladislav Yastrebov, Michael Fischlschweiger, Georges Cailletaud, Thomas Antretter. The role of phase interface energy in martensitic transformations : A lattice Monte-Carlo simulation. Mechanics Research Communications, 2014, 56, pp.37-41. ⟨10.1016/j.mechrescom.2013.11.006⟩. ⟨hal-00941953⟩
  • Thilo F. Morgeneyer, Thibault Taillandier-Thomas, Lukas Helfen, Tilo Baumbach, Ian Sinclair, et al.. In situ 3-D observation of early strain localization during failure of thin Al alloy (2198) sheet. Acta Materialia, 2014, 69, pp.78-91. ⟨10.1016/j.actamat.2014.01.033⟩. ⟨hal-00952176⟩
  • Marion Chieux, Cecilie Duhamel, Régine Molins, François Jomard, Luc Rémy, et al.. Sulfur localization in NiPtAl/superalloy systems after high temperature isothermal oxidation. Oxidation of Metals, 2014, 81, pp.115-125. ⟨10.1007/s11085-013-9428-5⟩. ⟨hal-00950465⟩
  • Henry Proudhon, J. Savkova, Stéphanie Basseville, Vincent Guipont, Michel Jeandin, et al.. Experimental and numerical wear studies of porous Reactive Plasma Sprayed Ti-6Al-4V/TiN composite coating. Wear, 2014, 311, pp.159-166. ⟨10.1016/j.wear.2014.01.012⟩. ⟨hal-00955598⟩
  • Gilles Rousselier, Meng Luo. A fully coupled void damage and Mohr-Coulomb based ductile fracture model in the framework of a Reduced Texture Methodology. International Journal of Plasticity, 2014, 55, pp.1-24. ⟨10.1016/j.ijplas.2013.09.002⟩. ⟨hal-00955601⟩
  • Sébastien Joannès, Laurent Mazé, Anthony R. Bunsell. A simple method for modeling the concentration-dependent water sorption in reinforced polymeric materials. Composites Part B: Engineering, 2014, 57, pp.219-227. ⟨10.1016/j.compositesb.2013.10.004⟩. ⟨hal-00905457⟩
  • Anthony Burteau, Jean-Dominique Bartout, Yves Bienvenu, Samuel Forest. On the creep deformation of nickel foams under compression. Comptes Rendus. Physique, 2014, 15, pp.705-718. ⟨10.1016/j.crhy.2014.09.004⟩. ⟨hal-01101498⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Mohamed Sennour, Anne Laurent, et al.. Microstructural characterization of internal welding defects and their effect on the tensile behavior of FSW joints of AA2198 Al-Cu-Li alloy. Metallurgical and Materials Transactions A, 2014, 45, pp.5531-5544. ⟨10.1007/s11661-014-2537-1⟩. ⟨hal-01095768⟩
  • Arthur Hellouin de Menibus, Quentin Auzoux, Philippe Mongabure, Vincent Macdonald, Thomas Le Jolu, et al.. Fracture of Zircaloy-4 cladding tubes with or without hydride blisters in uniaxial to plane strain conditions with standard and optimized expansion due to compression tests. Materials Science and Engineering: A, 2014, 604, pp.57-66. ⟨10.1016/j.msea.2014.02.075⟩. ⟨hal-00966156⟩
  • David Moreau, Arthur Villain, David N. Ku, Laurent Corté. Poly(vinyl alcohol) hydrogel coatings with tunable surface exposure of hydroxyapatite.. Biomatter, 2014, 4 (1), pp.e28764. ⟨10.4161/biom.28764⟩. ⟨hal-01070173⟩
  • Aurélie Benoit À La Guillaume, Luc Rémy, Alain Köster, Habibou Maitournam, F. Oger. Experimental investigation of the behavior and the low cycle fatigue life of a welded structure. Materials Science and Engineering: A, 2014, 595, pp.64-76. ⟨10.1016/j.msea.2013.11.082⟩. ⟨hal-00941722⟩
  • Lucien Laiarinandrasana, Francesco Baldi, Silvia Agnelli, Theonis Riccò. On the determination of the point of fracture initiation by the load separation criterion in J-testing of ductile polymers. Polymer Testing, 2013, 32 (8), pp.1326-1333. ⟨10.1016/j.polymertesting.2013.08.007⟩. ⟨hal-03359095⟩
  • Olivier Bouaziz, David Barbier. Benefits of Recovery and Partial Recrystallization of Nano-Twinned Austenitic Steels. Advanced Engineering Materials, 2013, 15 (10), pp.976-979. ⟨10.1002/adem.201300045⟩. ⟨hal-01500659⟩
  • C. Landron, Olivier Bouaziz, E. Maire, J. Adrien. Experimental investigation of void coalescence in a dual phase steel using X-ray tomography. Acta Materialia, 2013, 61 (18), pp.6821-6829. ⟨10.1016/j.actamat.2013.07.058⟩. ⟨hal-01501442⟩
  • J.-L. Chaboche, A. Gaubert, P. Kanouté, A. Longuet, Farida Azzouz, et al.. Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging. International Journal of Plasticity, 2013, 46, pp.1-22. ⟨10.1016/j.ijplas.2012.09.011⟩. ⟨hal-04061288⟩
  • Jean Louis Chaboche, Anaïs Gaubert, Pascale Kanouté, Arnaud Longuet, Farida Azzouz, et al.. Viscoplastic constitutive equations of combustion chamber materials including cyclic hardening and dynamic strain aging. International Journal of Plasticity, 2013, 46, pp.1-22. ⟨10.1016/j.ijplas.2012.09.011⟩. ⟨hal-03972154⟩
  • Pascaline Pré, Guillaume Huchet, Dominique Jeulin, Jean-Noël Rouzaud, Mohamed Sennour, et al.. A new approach to characterize the nanostructure of activated carbons from mathematical morphology applied to high resolution transmission electron microscopy images. Carbon, 2013, 52, pp.239-258. ⟨10.1016/j.carbon.2012.09.026⟩. ⟨hal-04161228⟩
  • Nicolas Cordero, Samuel Forest, Esteban P. Busso. Micromorphic modelling of grain size effects in metal polycrystals. GAMM-Mitteilungen, 2013, 36 (2), pp.186-202. ⟨10.1002/gamm.201310011⟩. ⟨hal-00904368⟩
  • Anthony Chesnaud, M Krapchanska, D. Vladikova, Z. Stoynov, A Chesnuad, et al.. Impedance studies of porous electrolyte with mixed ion conductivity. Bulgarian Chemical Communications, 2013, 45. ⟨hal-02460062⟩
  • Samuel Forest. Questioning size effects as predicted by strain gradient plasticity. Journal of the Mechanical Behavior of Materials, 2013, 22, pp.101-110. ⟨10.1515/jmbm-2013-0015⟩. ⟨hal-00942901⟩
  • Isaac Elishakoff, Clément Soret. A consistent set of nonlocal Bresse-Timoshenko equations for nanobeams with surface effects. Journal of Applied Mechanics, 2013, 80, 061001, 6 p. ⟨10.1115/1.4023630⟩. ⟨hal-00868976⟩
  • Abderrahmen Kaabi, Yves Bienvenu, Bertrand Pierre, Laurent Prevond. Development of specific materials for the high power electronic components in electric vehicles. MATEC Web of Conferences, 2013, JA 2013 – Journées Annuelles de la SF2M 2013 / SF2M Annual Meeting 2013, 7, pp.02005. ⟨10.1051/matecconf/20130702005⟩. ⟨hal-01658276⟩
  • Stéphanie Basseville, Henry Proudhon, Eva Héripré, Georges Cailletaud. Etude numérique des paramètres affectant les profils d'usure en fretting. Matériaux & Techniques, 2013, 101, 13 p. ⟨10.1051/mattech/2013069⟩. ⟨hal-00871224⟩
  • I. Knorr, Nicolas Cordero, Erica T Lilleodden, Cynthia Ann Volkert. Mechanical behavior of nanoscale Cu/PdSi multilayers. Acta Materialia, 2013, 61, pp.4984-4995. ⟨10.1016/j.actamat.2013.04.047⟩. ⟨hal-00841456⟩
  • Stéphanie Hollner, Emma Piozin, P. Mayr, Christel Caës, Ivan Tournié, et al.. Characterization of a boron alloyed 9Cr3W3CoVNbBN steel and further improvement of its high-temperature mechanical properties by thermomechanical treatments. Journal of Nuclear Materials, 2013, 441, pp.15-23. ⟨10.1016/j.jnucmat.2013.05.018⟩. ⟨hal-00841438⟩
  • Nader Haddar, Y. Kchaou, Alain Köster. Numerical computation of the energetic criterion at isothermal and thermal-mechanical cyclic tests under generalized plasticity of the F17TNb stainless steel. Engineering Fracture Mechanics, 2013, 107, pp.1-13. ⟨10.1016/j.engfracmech.2013.03.015⟩. ⟨hal-00841458⟩
  • Jean-Paul Boudou, Julia Tisler, Rolf Reuter, Alain Thorel, Patrick A. Curmi, et al.. Fluorescent nanodiamonds derived from HPHT with a size of less than 10 nm. Diamond and Related Materials, 2013, 37, pp.80-86. ⟨10.1016/j.diamond.2013.05.006⟩. ⟨hal-00841449⟩
  • Michael Fischlschweiger, Thomas Antretter, Georges Cailletaud. Transformation hardening and kinetics for stress assisted and temperature driven martensitic transformation in steels. Mechanics Research Communications, 2013, 40, pp.84-88. ⟨10.1016/j.mechrescom.2012.09.007⟩. ⟨hal-00785934⟩
  • Vincent Maurel, Luc Rémy, Mark Harvey, Henri Tézenas Du Montcel, Alain Köster. The respective roles of thermally grown oxide roughness and NiAl coating anisotropy in oxide spallation. Surface and Coatings Technology, 2013, 215, pp.52-61. ⟨10.1016/j.surfcoat.2012.08.097⟩. ⟨hal-00783271⟩
  • Kangying Zhu, Hao Chen, Jean-Philippe Masse, Olivier Bouaziz, Gabriel Gachet. The effect of prior ferrite formation on bainite and martensite transformation kinetics in advanced high-strength steels. Acta Materialia, 2013, 61, pp.6025-6036. ⟨10.1016/j.actamat.2013.06.043⟩. ⟨hal-00856157⟩
  • Alain Thorel, Joao Abreu, Sayed-Asif Ansar, Antonio Barbucci, T. Brylewski, et al.. Proof of concept for the dual membrane cell I. Fabrication and electrochemical testing of first prototypes. Journal of The Electrochemical Society, 2013, 160, pp.F360-F366. ⟨10.1149/2.051304jes⟩. ⟨hal-00794942⟩
  • Alain Thorel, J. Ciston, T. Bartel, C. Y. Song, U. Dahmen. Observation of the atomic structure of ß′-SiAlON using three generations of high resolution electron microscopes. Philosophical Magazine, 2013, 93 (14-15), pp.1172-1181. ⟨10.1080/14786435.2012.762468⟩. ⟨hal-00830457⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin. Effective elastic properties of auxetic microstructures : anisotropy and structural applications. International Journal of Mechanics and Materials in Design, 2013, 9 (1), pp.21-33. ⟨10.1007/s10999-012-9192-8⟩. ⟨hal-00790180⟩
  • Alae El Haitami, Frédéric Bretagnol, Patrick Assuid, Gilles Petitet, Sabine Cantournet, et al.. Erasable and reversible wrinkling of halogenated rubber surfaces. Langmuir, 2013, 29, pp.15664-15672. ⟨10.1021/la403295g⟩. ⟨hal-00942629⟩
  • Elias Merhy, Luc Rémy, Habibou Maitournam, Louis Augustins. Crack growth characterisation of A356-T7 aluminum alloy under thermo-mechanical fatigue loading. Engineering Fracture Mechanics, 2013, 110, pp.99-112. ⟨10.1016/j.engfracmech.2013.03.019⟩. ⟨hal-00904426⟩
  • Prajwal Sabnis, Samuel Forest, Nagaraj K. Arakere, Vladislav Yastrebov. Crystal plasticity analysis of cylindrical indentation on a Ni-base single crystal superalloy. International Journal of Plasticity, 2013, 51, pp.200-217. ⟨10.1016/j.ijplas.2013.05.004⟩. ⟨hal-00904140⟩
  • Damien Barbier, Mingxin Huang, Olivier Bouaziz. A novel eutectic Fe-15 wt.% Ti alloy with an ultrafine lamellar structure for high temperature applications. Intermetallics, 2013, 35, pp.41-44. ⟨10.1016/j.intermet.2012.11.016⟩. ⟨hal-00785228⟩
  • Joseph Fansi, X. Lemoine, Éric Maire, Caroline Landron, Olivier Bouaziz, et al.. Numerical investigation and experimental validation of physically based advanced GTN model for DP steels. Materials Science and Engineering: A, 2013, 569, pp.1-12. ⟨10.1016/j.msea.2013.01.019⟩. ⟨hal-00790173⟩
  • Fabien Szmytka, P. Michaud, Alain Köster, Luc Rémy. Thermo-mechanical fatigue resistance characterization and materials ranking from heat-flux-controlled tests. Application to cast-irons for automotive exhaust part. International Journal of Fatigue, 2013, 55, pp.136-146. ⟨10.1016/j.ijfatigue.2013.06.012⟩. ⟨hal-00820110⟩
  • Georges Kamgaing Somoh, Jacques Renard. Étude multi-échelle du comportement mécanique des composites tissés satin de 5. Exemple du carbone/PEEK. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2013, 23, pp.311-329. ⟨10.3166/rcma.23.311-329⟩. ⟨hal-00871100⟩
  • H.Y. Chou, Anthony R. Bunsell, G. Mair, Alain Thionnet. Effect of the loading rate on ultimate strength of composites. Application : pressure vessel slow burst test. Composite Structures, 2013, 104, pp.144-153. ⟨10.1016/j.compstruct.2013.04.003⟩. ⟨hal-00830471⟩
  • Jacques Besson, E.S. Drexler, C.N. Mc Cowan. Modeling flat to slant fracture transition using the computational cell methodology. Engineering Fracture Mechanics, 2013, 104, pp.80-95. ⟨10.1016/j.engfracmech.2013.02.032⟩. ⟨hal-00830626⟩
  • Mohamed Gouné, Frederic Danoix, Sébastien Allain, Olivier Bouaziz. Unambiguous carbon partitioning from martensite to austenite in Fe-C-Ni alloys during quenching and partitioning. Scripta Materialia, 2013, 68 (12), pp.1004-1007. ⟨10.1016/j.scriptamat.2013.02.058⟩. ⟨hal-00814685⟩
  • C Gérard, Georges Cailletaud, Brigitte Bacroix. Modeling of latent hardening produced by complex loading paths in FCC alloys. International Journal of Plasticity, 2013, 42, pp.194-212. ⟨10.1016/j.ijplas.2012.10.010⟩. ⟨hal-00785250⟩
  • Olivier Bouaziz, H.S. Kim, Y. Estrin. Architecturing of metal-based composites with concurrent nanostructuring : a new paradigm of materials design. Advanced Engineering Materials, 2013, 15, pp.336-340. ⟨10.1002/adem.201200261⟩. ⟨hal-00853753⟩
  • E Mladenova, D. Vladikova, Z. Stoynov, Anthony Chesnaud, A Thorel, et al.. Gases permeability study in dual membrane fuel cell. Bulgarian Chemical Communications, 2013, 45, pp.366 - 370. ⟨hal-02460067⟩
  • Anh-Tuan Ta, Nadia Labed, Frédéric Holweck, Alain Thionnet, François Peyraut. A new invariant-based method for building biomechanical behavior laws - Application to an anisotropic hyperelastic material with two fiber families. International Journal of Solids and Structures, 2013, 50 (14-15), pp.2251-2258. ⟨10.1016/j.ijsolstr.2013.03.033⟩. ⟨hal-00830357⟩
  • T. Ou, F. Delloro, Wolfgang G. Bessler, Alain Thorel, C. Nicolella. Proof of concept for the dual membrane cell II. Mathematical modeling of charge transport and reaction in the dual membrane. Journal of The Electrochemical Society, 2013, 160, pp.F367-F374. ⟨10.1149/2.041304jes⟩. ⟨hal-00794959⟩
  • Samuel Forest, Nicolas Guéninchault. Inspection of free energy functions in gradient crystal plasticity. Acta Mechanica Sinica, 2013, 29, pp.763-772. ⟨10.1007/s10409-013-0088-0⟩. ⟨hal-00942896⟩
  • Geoffrey Bégué, Grégory Fabre, Vincent Guipont, Michel Jeandin, P. Bilhe, et al.. Laser Shock Adhesion Test (LASAT) of EB-PVD TBCs: Towards an industrial application. Surface and Coatings Technology, 2013, 237, pp.305-312. ⟨10.1016/j.surfcoat.2013.07.026⟩. ⟨hal-00931592⟩
  • Vincent Marcadon, David Brown, Éveline Herve ́, Patrice Mele, Nicole Dominique Albérola, et al.. Confrontation between Molecular Dynamics and micromechanical approaches to investigate particle size effects on the mechanical behaviour of polymer nanocomposites. Computational Materials Science, 2013, 79, pp.495-505. ⟨10.1016/j.commatsci.2013.07.002⟩. ⟨hal-02350682⟩
  • Rémi Martinez, Vincent Russier, J.P. Couzinie, I. Guillot, Georges Cailletaud. Modeling of the influence of coarsening on viscoplastic behavior of a 319 foundry aluminum alloy. Materials Science and Engineering: A, 2013, 559, pp.40-48. ⟨10.1016/j.msea.2012.07.096⟩. ⟨hal-00751904⟩
  • Tolga Tavsanoglu, Michel Jeandin, Okan Addemir, Okan Agirseven, O. Yucel. An imaging SIMS study on the tribological properties of boron carbide thin films. Surface and Interface Analysis, 2013, 45, pp.587-591. ⟨10.1002/sia.5035⟩. ⟨hal-00785224⟩
  • Guillaume Huchet, Michel Boussuge, Vincent Maurel, H. Roustan. Mechanical properties of a spinel-ferrite-based cermet: effects of temperature and oxidation. Journal of Materials Science, 2013, 48, pp.3264-3271. ⟨10.1007/s10853-012-7111-x⟩. ⟨hal-00789979⟩
  • Fabien Szmytka, Habibou Maitournam, Luc Rémy. An implicit integration procedure for an elasto-viscoplastic model and its application to thermomechanical fatigue design of automotive parts. Computers & Structures, 2013, 119, pp.155-165. ⟨10.1016/j.compstruc.2013.01.009⟩. ⟨hal-00815505⟩
  • Vincent Maurel, Lukas Helfen, Romain Soulignac, Thilo F. Morgeneyer, Alain Köster, et al.. Three-dimensional damage evolution measurement in EB-PVD TBCs using synchrotron laminography. Oxidation of Metals, 2013, 79, pp.313-323. ⟨10.1007/s11085-012-9333-3⟩. ⟨hal-00820124⟩
  • Mohamed Sennour, Elizabeth Chaumun, Jérôme Crépin, Cecilie Duhamel, Fabrice Gaslain, et al.. TEM investigations on the effect of chromium content and of stress relief treatment on precipitation in Alloy 82. Journal of Nuclear Materials, 2013, 442, pp.262-289. ⟨10.1016/j.jnucmat.2013.09.002⟩. ⟨hal-00874728⟩
  • Luc Rémy, Marion Geuffrard, Adil Alam, Alain Köster, Eric Fleury. Effects of microstructure in high temperature fatigue: Lifetime to crack initiation of a single crystal superalloy in high temperature low cycle fatigue. International Journal of Fatigue, 2013, 57, pp.37-49. ⟨10.1016/j.ijfatigue.2012.10.013⟩. ⟨hal-00904099⟩
  • Mohammad Arab Pour Yazdi, Pascal Briois, S. Georges, Rémi Costa, Alain Billard. Characterization of PCFC-electrolytes deposited by reactive magnetron sputtering ; comparison with ceramic bulk samples. Fuel Cells, 2013, 13, pp.549-555. ⟨10.1002/fuce.201200170⟩. ⟨hal-01109568⟩
  • Olivier Bouaziz, Damien Barbier, J.D. Embury, G. Badinier. An extension of the Kocks-Mecking model of work hardening to include kinematic hardening and its application to solutes in ferrite. Philosophical Magazine, 2013, 93, pp.247-255. ⟨10.1080/14786435.2012.704419⟩. ⟨hal-00789988⟩
  • Thilo F. Morgeneyer, Lukas Helfen, Hazem Mubarak, François Hild. 3D Digital Volume Correlation of Synchrotron Radiation Laminography images of ductile crack initiation: An initial feasibility study. Experimental Mechanics, 2013, 53, pp.543-556. ⟨10.1007/s11340-012-9660-y⟩. ⟨hal-00848726⟩
  • Arthur Hellouin de Menibus, Thomas Guilbert, Quentin Auzoux, Caroline Toffolon, Jean Christophe Brachet, et al.. Hydrogen contribution to the thermal expansion of hydrided Zircaloy-4 cladding tubes. Journal of Nuclear Materials, 2013, 440, pp.169-177. ⟨10.1016/j.jnucmat.2013.04.039⟩. ⟨hal-00830844⟩
  • Naruepon Eiamnipon, Pongsak Nimdum, Jacques Renard, C. Kolitawong. Experimental investigation on high strain rate tensile behaviors of steel cord-rubber composite. Composite Structures, 2013, 99, pp.1-7. ⟨10.1016/j.compstruct.2012.12.008⟩. ⟨hal-00785929⟩
  • Pascaline Pre, Guillaume Huchet, Dominique Jeulin, Jean-Noël Rouzaud, Mohamed Sennour, et al.. A new approach to characterize the nanostructure of activated carbons from mathematical morphology applied to high resolution transmission electron microscopy images. Carbon, 2013, 52, pp.239-258. ⟨10.1016/j.carbon.2012.09.026⟩. ⟨hal-00765486⟩
  • Olivier Bouaziz, J.P. Masse, S. Allain, Laurent Orgéas, Pierre Latil. Compression of crumpled aluminum thin foils and comparison with other cellular materials. Materials Science and Engineering: A, 2013, 570, pp.1-7. ⟨10.1016/j.msea.2013.01.031⟩. ⟨hal-00821940⟩
  • Xu Han, Jacques Besson, Samuel Forest, Benoit Tanguy, Stéphane Bugat. A yield function for single crystals containing voids. International Journal of Solids and Structures, 2013, 50 (14-15), pp.2115-2131. ⟨10.1016/j.ijsolstr.2013.02.005⟩. ⟨hal-00830364⟩
  • Bertrand Poumellec, M. Lancry, R. Desmarchelier, Eveline Hervé, François Brisset, et al.. Asymmetric orientational writing in glass with femtosecond laser irradiation. Optical Materials Express, 2013, 3, pp.1586-1599. ⟨10.1364/OME.3.001586⟩. ⟨hal-00926558⟩
  • D. Steglich, Thilo F. Morgeneyer. Failure of magnesium sheets under monotonic loading : 3D examination of fracture mode and mechanisms. International Journal of Fracture, 2013, 183, pp.105-112. ⟨10.1007/s10704-013-9863-y⟩. ⟨hal-00869572⟩
  • Kamel Madi, Sylvain Gailliègue, Michel Boussuge, Samuel Forest, Michel Gaubil, et al.. Multiscale creep characterization and modeling of a zirconia-rich fused-cast refractory. Philosophical Magazine, 2013, 93, pp.2701-2728. ⟨10.1080/14786435.2013.785655⟩. ⟨hal-00868969⟩
  • Artem Arlazarov, Olivier Bouaziz, Alain Hazotte, Mohamed Gouné, Sébastien Allain. Characterization and modeling of manganese effect on strength and strain hardening of martensitic carbon steels. ISIJ international, 2013, 53 (6), pp.1076-1080. ⟨10.2355/isijinternational.53.1076⟩. ⟨hal-00845143⟩
  • Yanzhong Wang, Anthony Chesnaud, Emile Bévillon, Jin Huang, Jinlong Yang. Preparation and characterization of In-substituted BaSnO3 compounds. Functional Materials Letters, 2013, 6, ⟨10.1142/S1793604713500410⟩. ⟨hal-02460069⟩
  • Félix Fritzen, Samuel Forest, Djimedo Kondo, Thomas Böhlke. Computational homogenization of porous materials of Green type. Computational Mechanics, 2013, 52, pp.121-134. ⟨10.1007/s00466-012-0801-z⟩. ⟨hal-00874802⟩
  • Henry Proudhon, Lingtao Sun, Jean Meriaux, J.A. Ruiz-Sabariego, Georges Cailletaud. Simulation microstructurale de la propagation de fissures courtes dans un contact de fretting en TA6V. Matériaux & Techniques, 2013, 101, 5 p. ⟨10.1051/mattech/2013063⟩. ⟨hal-00871222⟩
  • Yang Shen, Thilo F. Morgeneyer, Jérome Garnier, Lucien Allais, Lukas Helfen, et al.. Three-dimensional quantitative in situ study of crack initiation and propagation in AA6061 aluminum alloy sheets via synchrotron laminography and finite-element simulations. Acta Materialia, 2013, 61, pp.2571-2582. ⟨10.1016/j.actamat.2013.01.035⟩. ⟨hal-00815629⟩
  • Anne Laure Rouffié, P. Wident, L. Ziolek, N. Delabrouille, Benoit Tanguy, et al.. Influences of process parameters and microstructure on the fracture mechanisms of ODS steels. Journal of Nuclear Materials, 2013, 433, pp.108-115. ⟨10.1016/j.jnucmat.2012.08.050⟩. ⟨hal-00751889⟩
  • Bilel Miled, David Ryckelynck, Sabine Cantournet. A priori hyper-reduction method for coupled viscoelastic-viscoplastic composites. Computers & Structures, 2013, 119, pp.95-103. ⟨10.1016/j.compstruc.2012.11.017⟩. ⟨hal-00790175⟩
  • Michel Jeandin, Gilles Rolland, Laure Line Descurninges, Marie-Hélène Berger. Quelles poudres pour la projection thermique par gaz froid. Traitements & Matériaux, 2013, 422, pp.31-40. ⟨hal-00853757⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas, André Pineau. Fracture toughness of the molten zone of resistance spot weld. International Journal of Fracture, 2013, 181, pp.209-226. ⟨10.1007/s10704-013-9836-1⟩. ⟨hal-00830479⟩
  • Olivier Bouaziz, Hatem Zurob, Mingxin Huang. Driving force and logic of development of advanced high strength steels for automotive applications. Steel Research International, 2013, 84, pp.937-947. ⟨10.1002/srin.201200288⟩. ⟨hal-01101434⟩
  • Yoann Guilhem, Stéphanie Basseville, Francois Curtit, Jean-Michel Stephan, Georges Cailletaud. Numerical investigations of the free surface effect in three-dimensional polycrystalline aggregates. Computational Materials Science, 2013, 70, pp.150-162. ⟨10.1016/j.commatsci.2012.11.052⟩. ⟨hal-01017647⟩
  • Henri-Alexandre Cayzac, Kacem Sai, Lucien Laiarinandrasana. Damage based constitutive relationships in semi-crystalline polymer by using multi-mechanisms model. International Journal of Plasticity, 2013, 51, pp.47-64. ⟨10.1016/j.ijplas.2013.06.008⟩. ⟨hal-00905508⟩
  • Romain Soulignac, Vincent Maurel, Luc Rémy, Alain Köster. Cohesive zone modelling of thermal barrier coatings interfacial properties based on three-dimensional observations and mechanical testing. Surface and Coatings Technology, 2013, 237, pp.95-104. ⟨10.1016/j.surfcoat.2013.09.065⟩. ⟨hal-00931692⟩
  • Stéphane Perrin, Loic Marchetti, Cecilie Duhamel, Mohamed Sennour, François Jomard. Influence of irradiation on the oxide film formed on 316L stainless steel in PWR primary water. Oxidation of Metals, 2013, 80, pp.623-633. ⟨10.1007/s11085-013-9401-3⟩. ⟨hal-00931257⟩
  • Yanzhong Wang, Anthony Chesnaud, Emile Bévillon, Jijun Xiong, Jinlong Yang. Effects of Sn substitution on structural and electrical properties of BaSn0.75M0.25O3−δ (M = Sc, In, Y, Gd, Nd...). Journal of Alloys and Compounds, 2013, 555, pp.395-401. ⟨10.1016/j.jallcom.2012.10.195⟩. ⟨hal-00785245⟩
  • Andrey Molotnikov, Ralf Gerbrand, Olivier Bouaziz, Y. Estrin. Sandwich panels with a core segmented into topologically interlocked elements. Advanced Engineering Materials, 2013, 15, pp.728-731. ⟨10.1002/adem.201300002⟩. ⟨hal-00853692⟩
  • Luc Rémy, Fabien Szmytka, Laurent Bucher. Constitutive models for bcc engineering iron alloys exposed to thermal-mechanical fatigue. International Journal of Fatigue, 2013, 53, pp.2-14. ⟨10.1016/j.ijfatigue.2011.11.007⟩. ⟨hal-00830754⟩
  • Alain Thorel, U. Dahmen. From galaxies to nanocrystals : a brief trip across 30 orders of magnitude. Microscopy today, 2013, 21 (1), pp.18-20. ⟨10.1017/S1551929512001137⟩. ⟨hal-00794659⟩
  • Jason S. Bach, Fabrice Detrez, Mohammed Cherkaoui, Sabine Cantournet, David N. Ku, et al.. Hydrogel fibers for ACL prosthesis : design and mechanical evaluation of PVA and PVA/UHMWPE fiber constructs. Journal of Biomechanics, 2013, 46, pp.1463-1470. ⟨10.1016/j.jbiomech.2013.02.020⟩. ⟨hal-00821932⟩
  • Alejandro M. Aragon, Vladislav Yastrebov, Jean-François Molinari. A constrained-optimization methodology for the detection phase in contact mechanics simulations. International Journal for Numerical Methods in Engineering, 2013, 96, pp.323-338. ⟨10.1002/nme.4561⟩. ⟨hal-00905452⟩
  • Mathieu Touboul, Gilles Rousselier, Jérôme Crépin, Félix Latourte, Sylvain Leclercq. Identification of local viscoplastic properties in P91 welds from full field measurements at room temperature. Experimental Mechanics, 2013, 53, pp.455-468. ⟨10.1007/s11340-012-9655-8⟩. ⟨hal-00815503⟩
  • Olivier Bouaziz. Geometrically induced strain hardening. Scripta Materialia, 2013, 68, pp.28-30. ⟨10.1016/j.scriptamat.2012.08.008⟩. ⟨hal-00751896⟩
  • J.-L. Chaboche, P. Kanouté, Farida Azzouz. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions. International Journal of Plasticity, 2012, 35, pp.44-66. ⟨10.1016/j.ijplas.2012.01.010⟩. ⟨hal-04074961⟩
  • Mathilde Ouattara-Brigaudet, Sandrine Berthon-Fabry, Christian Beauger, Marian Chatenet, Nathalie Job, et al.. Influence of the carbon texture of platinum/carbon aerogel electrocatalysts on their behavior in a proton exchange membrane fuel cell cathode. International Journal of Hydrogen Energy, 2012, 37 (12), pp.9742-9757. ⟨10.1016/j.ijhydene.2012.03.085⟩. ⟨hal-04161040⟩
  • David Ryckelynck, Florence Vincent, Sabine Cantournet. Multidimensional a priori hyper-reduction of mechanical models involving internal variables. Computer Methods in Applied Mechanics and Engineering, 2012, 225-228, pp.28-43. ⟨10.1016/j.cma.2012.03.005⟩. ⟨hal-03655821⟩
  • T. Vilaro, C. Colin, Jean-Dominique Bartout, Loic Nazé, Mohamed Sennour. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy. Materials Science and Engineering: A, 2012, 534, pp.446-451. ⟨10.1016/j.msea.2011.11.092⟩. ⟨hal-04161215⟩
  • E.M. El-Giar, M. Asle Zaeem, Haitham El Kadiri, R.S. Florea, H. Rhee, et al.. On laser welding of thin steel sheets. Science and Technology of Welding & Joining, 2012, 17, pp.571-580. ⟨10.1179/1362171812Y.0000000050⟩. ⟨hal-00751810⟩
  • Florine Maes, Damien Montarnal, Sabine Cantournet, François Tournilhac, Laurent Corté, et al.. Activation and deactivation of self-healing in supramolecular rubbers. Soft Matter, 2012, 8, pp.1681-1687. ⟨10.1039/C2SM06715C⟩. ⟨hal-00675695⟩
  • D. Vladikova, Z. Stoynov, G. Raikova, M Krapchanska, A Thorel, et al.. Dual membrane fuel cell -impedance approach for proof of concept. Bulgarian Chemical Communications, 2012, 44, pp.364 - 370. ⟨hal-02460073⟩
  • Mamane Oumarou, Dominique Jeulin, Jacques Renard, Philippe Castaing. Multi-scale statistical approach of the elastic and thermal behavior of a thermoplastic polyamid glass fiber composite. Technische Mechanik, 2012, 32, pp.484-506. ⟨hal-00722633⟩
  • Yanzhong Wang, Anthony Chesnaud, Emile Bévillon, Guilhem Dezanneau. Properties of Y-doped BaSnO3 proton conductors. Solid State Ionics, 2012, 214, pp.45-55. ⟨10.1016/j.ssi.2012.02.45⟩. ⟨hal-00694491⟩
  • Gilles Rolland, Pierre Sallamand, Vincent Guipont, Michel Jeandin, Elodie Boller, et al.. Damage study of cold-sprayed composite materials for application to electrical contacts. Journal of Thermal Spray Technology, 2012, 21, pp.758-772. ⟨10.1007/s11666-012-9756-z⟩. ⟨hal-00732439⟩
  • M. Cottura, Yann Le Bouar, Alphonse Finel, Benoit Appolaire, Kais Ammar, et al.. A phase field model incorporating strain gradient viscoplasticity : application to rafting in Ni-base superalloys. Journal of the Mechanics and Physics of Solids, 2012, 60, pp.1243-1256. ⟨10.1016/j.jmps.2012.04.003⟩. ⟨hal-00701166⟩
  • Samuel Forest, Karam Sab. Stress gradient continuum theory. Mechanics Research Communications, 2012, 40, pp.16-25. ⟨10.1016/j.mechrescom.2011.12.002⟩. ⟨hal-00697585⟩
  • M. Gouné, Olivier Bouaziz, S. Allain, Kangying Zhu, M. Takahashi. Kinetics of bainite transformation in heterogeneous microstructures. Materials Letters, 2012, 67, pp.187-189. ⟨10.1016/j.matlet.2011.09.053⟩. ⟨hal-00661598⟩
  • Melis Arslan, M.C. Boyce. A micromechanically based anisotropic constitutive model for the microtubule wall. Journal of Applied Mechanics, 2012, 79, 021002, 7 p. ⟨10.1115/1.4005548⟩. ⟨hal-00700835⟩
  • Cecilie Duhamel, Marion Chieux, Régine Molins, Luc Rémy, Daniel Monceau, et al.. Thermal cycling behaviour of thermal barrier coating systems based on first- and fourth-generation Ni-based superalloys. Materials at High Temperatures, 2012, 29, pp.136-144. ⟨10.3184/096034012X13335273125433⟩. ⟨hal-00726001⟩
  • J. Ghighi, J. Cormier, E. Ostoja-Kuczynski, J. Mendez, Georges Cailletaud, et al.. A Microstructure Sensitive Approach for the Prediction of the Creep Behaviour and Life under Complex Loading Paths. Technische Mechanik, 2012, 32, pp.205-220. ⟨hal-04074871⟩
  • Saber El Arem, Quoc Son Nguyen. Nonlinear dynamics of a rotating shaft with a breathing crack. Annals of Solid and Structural Mechanics, 2012, 3, pp.1-14. ⟨10.1007/s12356-011-0025-5⟩. ⟨hal-00651050⟩
  • F. Dynys, Marie-Hélène Berger, Alp Sehirlioglu. Thermoelectric properties of undoped and doped (Ti0.75Sn0.25)O2. Journal of the American Ceramic Society, 2012, 95, pp.619-626. ⟨10.1111/j.1551-2916.2011.04794.x⟩. ⟨hal-00683957⟩
  • Mathilde Ouattara-Brigaudet, Sandrine Berthon-Fabry, Christian Beauger, Marian Chatenet, Nathalie Job, et al.. Influence of the carbon texture of platinum/carbon aerogel electrocatalysts on their behavior in a proton exchange membrane fuel cell cathode. International Journal of Hydrogen Energy, 2012, 37 (12), pp.9742-9757. ⟨10.1016/j.ijhydene.2012.03.085⟩. ⟨hal-00699512⟩
  • Matthieu Mazière, H. Dierke. Investigations on the Portevin Le Chatelier critical strain in an aluminum alloy. Computational Materials Science, 2012, 52, pp.68-72. ⟨10.1016/j.commatsci.2011.05.039⟩. ⟨hal-00658646⟩
  • D.-K. Trinh, R. Jänicke, Nicolas Auffray, S. Diebels, Samuel Forest. Evaluation of generalized continuum substitution models for heterogeneous materials. International Journal for Multiscale Computational Engineering, 2012, 10 (6), pp.527-549. ⟨10.1615/IntJMultCompEng.2012003105⟩. ⟨hal-00718875⟩
  • Jason S. Bach, Mohammed Cherkaoui, Laurent Corté, Sabine Cantournet, David N. Ku. Design considerations for a prosthetic anterior cruciate ligament. Journal of Medical Devices, 2012, 6, 045004, 9 p. ⟨10.1115/1.4007945⟩. ⟨hal-00815972⟩
  • Philippe Colomban, Hung Manh Dinh, Aurélie Tournié, Vincent Jauzein. Origin of the variability of the mechanical properties of silk fibres: 3. Order and macromolecule orientation in Bombyx mori bave, hand-stretched strings and Nephila madagascarensis spider fibres. Journal of Raman Spectroscopy, 2012, 43, pp.1042-1048. ⟨10.1002/jrs.3122⟩. ⟨hal-01109380⟩
  • Yasuhiro Shinohara, Jacques Besson, Yazid Madi. Anisotropic damage behavior in high-strength line pipe steels. International Journal of Offshore and Polar Engineering (IJOPE), 2012, 22, pp.83-89. ⟨hal-00705798⟩
  • Lucien Laiarinandrasana, Yannick Nziakou, Jean Louis Halary. Fracture behavior of amorphous and semicrystalline blends of poly(vinylidene fluoride) and poly(methyl methacrylate). Journal of Polymer Science Part B: Polymer Physics, 2012, Deformation, Yield and Fracture of Polymers, 50 (24), pp.1740-1747. ⟨10.1002/polb.23188⟩. ⟨hal-03359089⟩
  • Dhouha Mellouli, Nader Haddar, Alain Köster, Hassine Ferid Ayedi. Thermal fatigue failure of brass die-casting dies. Engineering Failure Analysis, 2012, 20, pp.137-146. ⟨10.1016/j.engfailanal.2011.11.006⟩. ⟨hal-00675703⟩
  • Delphine Reche, Jacques Besson, T. Sturel, X. Lemoine, Anne-Françoise Gourgues-Lorenzon. Analysis of the air-bending test using finite-element simulation : application to steel sheets. International Journal of Mechanical Sciences, 2012, 57, pp.43-53. ⟨10.1016/j.ijmecsci.2012.01.014⟩. ⟨hal-00705763⟩
  • Benoît Piezel, B.C.N. Mercatoris, Wassim Trabelsi, Lucien Laiarinandrasana, Alain Thionnet, et al.. Bending effect on the risk for delamination at the reinforcement/matrix interface of 3D woven fabric composite using a shell-like RVE. Composite Structures, 2012, 94, pp.2343-2357. ⟨10.1016/j.compstruct.2012.03.015⟩. ⟨hal-00700994⟩
  • Antoine Andrieu, André Pineau, Jacques Besson, David Ryckelynck, Olivier Bouaziz. Bimodal Beremin-type model for brittle fracture of inhomogeneous ferritic steels: Theory and applications. Engineering Fracture Mechanics, 2012, 95, pp.84-101. ⟨10.1016/j.engfracmech.2011.10.016⟩. ⟨hal-00751911⟩
  • Lucien Laiarinandrasana, Aurélie Jean, Dominique Jeulin, Samuel Forest. Modelling the effects of various contents of fillers on the relaxation rate of elastomers. Materials & Design, 2012, 33, pp.75-82. ⟨10.1016/j.matdes.2011.06.054⟩. ⟨hal-00624105⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin. Elastoplasticity of auxetic materials. Computational Materials Science, 2012, 64, pp.57-61. ⟨10.1016/j.commatsci.2012.03.036⟩. ⟨hal-00732417⟩
  • Sébastien Allain, Olivier Bouaziz, M. Takahashi. Toward a new interpretation of the mechanical behaviour of As-quenched low alloyed martensitic steels. ISIJ international, 2012, 52, pp.717-722. ⟨10.2355/isijinternational.52.717⟩. ⟨hal-00700985⟩
  • Nicolas Cordero, Samuel Forest, Esteban P. Busso. Generalised continuum modelling of grain size effects in polycrystals. Comptes Rendus Mécanique, 2012, 340, pp.261-274. ⟨10.1016/j.crme.2012.02.009⟩. ⟨hal-00723160⟩
  • Philippe Colomban, Hung Manh Dinh, Anthony R. Bunsell, Bernard Mauchamp. Origin of the variability of the mechanical properties of silk fibres: 1. The relationship between disorder, hydration and stress/strain behaviour. Journal of Raman Spectroscopy, 2012, 43 (3), pp.425-432. ⟨10.1002/jrs.3044⟩. ⟨hal-01109327⟩
  • Guillaume Abrivard, Esteban P. Busso, Samuel Forest, Benoit Appolaire. Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part I : theory and numerical implementation. Philosophical Magazine, 2012, 92, pp.3618-3642. ⟨10.1080/14786435.2012.713135⟩. ⟨hal-00750337⟩
  • Can Ngon Nguyen, Fabrice Barbe, Nikolay Osipov, Georges Cailletaud, Bernard Marini, et al.. Micromechanical local approach to brittle failure in bainite high resolution polycrystals: A short presentation. Computational Materials Science, 2012, 64, pp.62-65. ⟨10.1016/j.commatsci.2012.03.034⟩. ⟨hal-00732433⟩
  • Thomas Vilaro, Christophe Colin, Jean-Dominique Bartout, Loic Nazé, Mohamed Sennour. Microstructural and mechanical approaches of the selective laser melting process applied to a nickel-base superalloy. Materials Science and Engineering: A, 2012, 534, pp.446-451. ⟨10.1016/j.msea.2011.11.092⟩. ⟨hal-00675998⟩
  • Hyung-Jun Chang, Anais Gaubert, Marc Fivel, Stéphane Berbenni, Olivier Bouaziz, et al.. Analysis of particle induced dislocation structures using three-dimensional dislocation dynamics and strain gradient plasticity. Computational Materials Science, 2012, 52, pp.31-39. ⟨10.1016/j.commatsci.2011.02.014⟩. ⟨hal-00662343⟩
  • Tolga Tavsanoglu, O. Addemir, Michel Jeandin, O. Yucel. A functionally graded multilayer approach to the synthesis of boron containing ceramic thin films. Solid State Sciences, 2012, 14, pp.1717-1721. ⟨10.1016/j.solidstatesciences.2012.06.014⟩. ⟨hal-00765531⟩
  • Antoine Andrieu, André Pineau, Jacques Besson, David Ryckelynck, Olivier Bouaziz. Beremin model: Methodology and application to the prediction of the Euro toughness data set. Engineering Fracture Mechanics, 2012, 95, pp.102-117. ⟨10.1016/j.engfracmech.2011.10.019⟩. ⟨hal-00751907⟩
  • L. Courtois, E. Maire, Michel Perez, D. Rodney, Olivier Bouaziz, et al.. Mechanical properties of monofilament entangled materials. Advanced Engineering Materials, 2012, 14 (12), pp.1128-1133. ⟨10.1002/adem.201100356⟩. ⟨hal-00781282⟩
  • Huaidong Wang, Clotilde Berdin, Matthieu Mazière, Samuel Forest, Claude Prioul, et al.. Experimental and numerical study of dynamic strain ageing and its relation to ductile fracture of a C-Mn steel. Materials Science and Engineering: A, 2012, 547, pp.19-31. ⟨10.1016/j.msea.2012.03.069⟩. ⟨hal-00714783⟩
  • Vincent Jauzein, Anthony R. Bunsell. Bio-composite aspects of silk : the sericin sheath acting as a matrix. Journal of Materials Science, 2012, 47, pp.3082-3088. ⟨10.1007/s10853-011-6141-0⟩. ⟨hal-00705771⟩
  • A. Bertei, Alain Thorel, Wolfgang G. Bessler, C. Nicolella. Mathematical modeling of mass and charge transport and reaction in a solid oxide fuel cell with mixed ionic conduction. Chemical Engineering Science, 2012, 68, pp.606-616. ⟨10.1016/j.ces.2011.10.025⟩. ⟨hal-00658639⟩
  • David H. Allen, Anthony R. Bunsell, S. Camara, Alain Thionnet. Une méthode FE2 simplifiée appliquée à la modélisation de l'éclatement des réservoirs composites haute pression. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2012, 22, pp.457-470. ⟨10.3166/rcma.22.457-470⟩. ⟨hal-00818805⟩
  • Massimo Viviani, Giovanna Canu, Paola Carpanese, Antonio Barbucci, Alessandra Sanson, et al.. Dual cells with mixed protonic-anionic conductivity for reversible SOFC/SOEC operation. Energy Procedia, 2012, Fuel Cells 2012 Science & Technology – A Grove Fuel Cell Event, 28, pp.182-189. ⟨10.1016/j.egypro.2012.08.052⟩. ⟨hal-00794715⟩
  • Tristan Petit, Jean-Charles Arnault, Hugues Girard, Mohamed Sennour, Tsai-Yang Kang, et al.. Oxygen hole doping of nanodiamond. Nanoscale, 2012, 4, pp.6792-6799. ⟨10.1039/C2NR31655B⟩. ⟨hal-00751936⟩
  • Éric Maire, Thilo F. Morgeneyer, Caroline Landron, Jérôme Adrien, Lukas Helfen. Bulk evaluation of ductile damage development using high resolution tomography and laminography. Comptes Rendus. Physique, 2012, 13, pp.328-336. ⟨10.1016/j.crhy.2011.12.009⟩. ⟨hal-00685034⟩
  • Clément Campillo, Julie Jerber, Cathy Fisch, Maria Simoes-Betbeder, Pascale Dupuis-Williams, et al.. Mechanics of membrane-cytoskeleton attachment in Paramecium. New Journal of Physics, 2012, 14, 125016, 9 p. ⟨10.1088/1367-2630/14/12/125016⟩. ⟨hal-00814768⟩
  • Gilles Rousselier, Meng Luo, Dirk Mohr. Macroscopic plasticity modeling of anisotropic aluminum extrusions using a Reduced Texture Methodology. International Journal of Plasticity, 2012, 30-31, pp.144-165. ⟨10.1016/j.ijplas.2011.10.004⟩. ⟨hal-00683949⟩
  • Vincent Maurel, L. Helfen, Franck N'Guyen, Alain Köster, M. Di Michiel, et al.. Three-dimensional investigation of thermal barrier coatings by synchrotron-radiation computed laminography. Scripta Materialia, 2012, 66, pp.471-474. ⟨10.1016/j.scriptamat.2011.12.021⟩. ⟨hal-00683883⟩
  • Aurélie Benoit À La Guillaume, Habibou Maitournam, Luc Rémy, F. Oger. Cyclic behaviour of structures under thermomechanical loadings: Application to exhaust manifolds. International Journal of Fatigue, 2012, 38, pp.65-74. ⟨10.1016/j.ijfatigue.2011.11.012⟩. ⟨hal-00676003⟩
  • C. Feng, Vincent Guipont, Michel Jeandin, Olivier Amsellem, F. Pauchet, et al.. B4C/Ni composite coatings prepared by cold spray of blended or CVD-coated powders. Journal of Thermal Spray Technology, 2012, 21, pp.561-570. ⟨10.1007/s11666-012-9774-x⟩. ⟨hal-00732238⟩
  • Francesco Delloro, Massimo Viviani. Simulation study about the geometry of electrode-electrolyte contact in a SOFC. Journal of Electroceramics, 2012, 29, pp.216-224. ⟨10.1007/s10832-012-9766-8⟩. ⟨hal-00261269⟩
  • Michael Fischlschweiger, Georges Cailletaud, Thomas Antretter. A mean-field model for transformation induced plasticity including backstress effects for non-proportional loadings. International Journal of Plasticity, 2012, 37, pp.53-71. ⟨10.1016/j.ijplas.2012.04.001⟩. ⟨hal-00725957⟩
  • Henry Proudhon, A. Moffat, I. Sinclair, Jean-Yves Buffiere. Three-dimensional characterisation and modelling of small fatigue corner cracks in high strength Al-alloys. Comptes Rendus. Physique, 2012, 13, pp.316-327. ⟨10.1016/j.crhy.2011.12.005⟩. ⟨hal-00685017⟩
  • Lin-Thy Mingault. La microscopie électronique - micro-analyse au regard des normes. Traitements & Matériaux, 2012, 415, pp.25-29. ⟨hal-00701615⟩
  • Jean Louis Chaboche, Pascale Kanoute, Farida Azzouz. Cyclic inelastic constitutive equations and their impact on the fatigue life predictions. International Journal of Plasticity, 2012, 35, pp.44-66. ⟨10.1016/j.ijplas.2012.01.010⟩. ⟨hal-00714264⟩
  • Abdelkader Benchikh, Catherine Debiemme-Chouvy, Hubert Cachet, Alain Pailleret, Boualem Saidani, et al.. Influence of electrochemical pre-treatment on highly reactive carbon nitride thin films deposited on stainless steel for electrochemical applications. Electrochimica Acta, 2012, 75, pp.131-138. ⟨10.1016/j.electacta.2012.04.129⟩. ⟨hal-00789022⟩
  • H.Y. Chou, Anthony R. Bunsell, Alain Thionnet. Visual indicator for the detection of end-of-life criterion for composite high pressure vessels for hydrogen storage. International Journal of Hydrogen Energy, 2012, 37, pp.16247-16255. ⟨10.1016/j.ijhydene.2012.07.021⟩. ⟨hal-00743332⟩
  • Julien Ghighi, Jonathan Cormier, Elisabeth Ostoja-Kuczynski, José Mendez, Georges Cailletaud, et al.. A microstructure sensitive approach for the prediction of the creep behaviour and life under complex loading paths. Technische Mechanik, 2012, 32, pp.205-220. ⟨hal-00722620⟩
  • Laetitia Petroni, Michel Boussuge, David Ryckelynck. Numerical simulation of the cooling-down of high-zirconia fused-cast refractories. Journal of the European Ceramic Society, 2012, 32, pp.3941-3947. ⟨10.1016/j.jeurceramsoc.2012.06.004⟩. ⟨hal-00732410⟩
  • Luc Gillibert, Charles Peyrega, Dominique Jeulin, Vincent Guipont, Michel Jeandin. 3D multiscale segmentation and morphological analysis of x-ray microtomography from cold-sprayed coatings. Journal of Microscopy, 2012, 248 (2), pp.187-199. ⟨10.1111/j.1365-2818.2012.03655.x⟩. ⟨hal-00751923⟩
  • Lokman Montagnard, Kay Ellinghaus, Stéphane Quilici. Erweiterte Berechnungsmodelle für verbesserte Belastungsvorhersagen. ATZ extra, 2012, 17 (5), pp.88-93. ⟨10.1365/s35778-012-0721-8⟩. ⟨hal-00785941⟩
  • Anthony Marais, Matthieu Mazière, Samuel Forest, Patrick Le Delliou, Aurore Parrot. Identification of a strain-aging model accounting for Lüders behavior in a C-Mn steel. Philosophical Magazine, 2012, 92, pp.3589-3617. ⟨10.1080/14786435.2012.699687⟩. ⟨hal-00750401⟩
  • Anthony Burteau, Franck N'Guyen, Jean-Dominique Bartout, Samuel Forest, Yves Bienvenu, et al.. Impact of material processing and deformation on cell morphology and mechanical behavior of polyurethane and nickel foams. International Journal of Solids and Structures, 2012, 49 (19-20), pp.2714-2732. ⟨10.1016/j.ijsolstr.2012.05.026⟩. ⟨hal-00726018⟩
  • C. Guillemer, Michel Clavel, Georges Cailletaud. Modélisation du glissement cristallographique et du maclage dans le magnésium extrudé sous chargement cyclique. Revue de Métallurgie, 2012, 109, pp.423-426. ⟨10.1051/metal/2012031⟩. ⟨hal-00785286⟩
  • Edouard Pouillier, Anne-Françoise Gourgues, D. Tanguy, Esteban P. Busso. A study of intergranular fracture in an aluminium alloy due to hydrogen embrittlement. International Journal of Plasticity, 2012, 34, pp.139-153. ⟨10.1016/j.ijplas.2012.01.004⟩. ⟨hal-00701032⟩
  • A.E. Scott, I. Sinclair, S.M. Spearing, Alain Thionnet, Anthony R. Bunsell. Damage accumulation in a carbon/epoxy composite : Comparison between a multiscale model and computed tomography experimental results. Composites Part A: Applied Science and Manufacturing, 2012, 43, pp.1514-1522. ⟨10.1016/j.compositesa.2012.03.011⟩. ⟨hal-00723163⟩
  • Lucien Laiarinandrasana, Thilo F. Morgeneyer, Henry Proudhon, Franck N'Guyen, Éric Maire. Effect of multiaxial stress state on morphology and spatial distribution of voids in deformed semicrystalline polymer assessed by x-ray tomography. Macromolecules, 2012, 45, pp.4658-4668. ⟨10.1021/ma3005247⟩. ⟨hal-00725911⟩
  • Henry Proudhon, Jia Li, Vincent Chiaruttini, Thilo F. Morgeneyer, Lucien Laiarinandrasana, et al.. Combining X‐ray Microtomography with Full Field Finite Elements Method to Study 3 D Cracking in Stuctural Materials. Minerals, Metals and Materials Society/AIME, 420 Commonwealth Dr., P. O. Box 430 Warrendale PA 15086 United States.[np]. Jul, 2012. ⟨hal-01668797⟩
  • Lukas Helfen, Thilo F. Morgeneyer, F. Xu, M. Mavrogordato, I. Sinclair, et al.. Synchrotron and neutron laminography for three-dimensional imaging of devices and flat material specimens. International Journal of Materials Research, 2012, 103, pp.170-173. ⟨10.3139/146.110668⟩. ⟨hal-00683973⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Jean-François Molinari. Contact between representative rough surfaces. Physical Review E : Statistical, Nonlinear, and Soft Matter Physics, 2012, 86, 035601, 4 p. ⟨10.1103/PhysRevE.86.035601⟩. ⟨hal-00750394⟩
  • Guillaume Abrivard, Esteban P. Busso, Samuel Forest, Benoit Appolaire. Phase field modelling of grain boundary motion driven by curvature and stored energy gradients. Part II : application to recrystallisation. Philosophical Magazine, 2012, 92, pp.3643-3664. ⟨10.1080/14786435.2012.717726⟩. ⟨hal-00750399⟩
  • G. Raikova, M. Krapchanska, I. Genov, Gilles Caboche, Lionel Combemale, et al.. Impedance investigation of BaCe0.85Y0.15O3-delta properties for hydrogen conductor in fuel cells. Bulgarian Chemical Communications, 2012, 44, pp.389-394. ⟨hal-00797620⟩
  • Michael Fischlschweiger, Eduard R. Oberaigner. Kinetics and rates of martensitic phase transformation based on statistical physics. Computational Materials Science, 2012, 52, pp.189-192. ⟨10.1016/j.commatsci.2011.03.038⟩. ⟨hal-00659364⟩
  • Prajwal Sabnis, Matthieu Mazière, Samuel Forest, Nagaraj K. Arakere, F. Ebrahimi. Effect of secondary orientation on notch-tip plasticity in superalloy single crystals. International Journal of Plasticity, 2012, 28, pp.102-123. ⟨10.1016/j.ijplas.2011.06.003⟩. ⟨hal-00659374⟩
  • Artem Arlazarov, Mohamed Gouné, Olivier Bouaziz, Alain Hazotte, Gérard Petitgand, et al.. Evolution of microstructure and mechanical properties of medium Mn steels during double annealing. Materials Science and Engineering: A, 2012, 542, pp.31-39. ⟨10.1016/j.msea.2012.02.024⟩. ⟨hal-00683481⟩
  • Caroline Landron, Eric Maire, J. Adrien, Heikki Suhonen, Peter Cloetens, et al.. Non-destructive 3-D reconstruction of the martensitic phase in a dual-phase steel using synchrotron holotomography. Scripta Materialia, 2012, 66, pp.1077-1080. ⟨10.1016/j.scriptamat.2012.03.003⟩. ⟨hal-00714419⟩
  • Kacem Sai, Lakhdar Taleb, Georges Cailletaud. Numerical simulation of the anisotropic behavior of 2017 aluminum alloy. Computational Materials Science, 2012, 65, pp.48-57. ⟨10.1016/j.commatsci.2012.06.035⟩. ⟨hal-00725968⟩
  • Félix Fritzen, Samuel Forest, Thomas Böhlke, Djimedo Kondo, Toufik Kanit. Computational homogenization of elasto-plastic porous metals. International Journal of Plasticity, 2012, 29, pp.102-119. ⟨10.1016/j.ijplas.2011.08.005⟩. ⟨hal-00645498⟩
  • Nicolas Cordero, Samuel Forest, Esteban P. Busso, Stéphane Berbenni, M. Cherkaoui. Grain size effects on plastic strain and dislocation density tensor fields in metal polycrystals. Computational Materials Science, 2012, 52, pp.7-13. ⟨10.1016/j.commatsci.2011.02.043⟩. ⟨hal-00658644⟩
  • Lucien Laiarinandrasana, Y. Fu, Jean Louis Halary. Toughness improvement of epoxy networks by nanophase-separating antiplasticizers. Journal of Applied Polymer Science, 2012, 123, pp.3437-3447. ⟨10.1002/app.34646⟩. ⟨hal-00675986⟩
  • Olivier Amsellem, François Borit, Dominique Jeulin, Vincent Guipont, Michel Jeandin, et al.. Three-dimensional simulation of porosity in plasma-sprayed alumina using microtomography and electrochemical impedance spectrometry for finite element modeling of properties. Journal of Thermal Spray Technology, 2012, 21, pp.193-201. ⟨10.1007/s11666-011-9687-0⟩. ⟨hal-00684991⟩
  • H. Lefaix-Jeuland, L. Marchetti, S. Perrin, M. Pijolat, Mohamed Sennour, et al.. Oxidation kinetics and mechanisms of Ni-base alloys in pressurised water reactor primary conditions: Influence of subsurface defects. Corrosion Science, 2011, 53 (12), pp.3914-3922. ⟨10.1016/j.corsci.2011.07.024⟩. ⟨hal-04161147⟩
  • S. Hereñú, Mohamed Sennour, M. Balbi, I. Alvarez-Armas, A. Thorel, et al.. Influence of dislocation glide on the spinodal decomposition of fatigued duplex stainless steels. Materials Science and Engineering: A, 2011, 528 (25-26), pp.7636-7640. ⟨10.1016/j.msea.2011.06.070⟩. ⟨hal-04161155⟩
  • Vladislav Yastrebov, Julian Durand, Henry Proudhon, Georges Cailletaud. Rough surface contact analysis by means of the Finite Element Method and of a new reduced model. Comptes Rendus Mécanique, 2011, 339 (7-8), pp.473-490. ⟨10.1016/j.crme.2011.05.006⟩. ⟨hal-02043762⟩
  • C. Courcier, Vincent Maurel, L. Rémy, S. Quilici, I. Rouzou, et al.. Interfacial damage based life model for EB-PVD thermal barrier coating. Surface and Coatings Technology, 2011, 205 (13-14), pp.3763-3773. ⟨10.1016/j.surfcoat.2011.01.008⟩. ⟨hal-04262636⟩
  • Mario Leindl, Michael Fischlschweiger, Eduard R. Oberaigner. Damping behaviour of vibrating shape memory alloy rods investigated by a novel constitutive model. PAMM, 2011, 11 (1), pp.403-404. ⟨10.1002/pamm.201110193⟩. ⟨hal-00675608⟩
  • Aurélie Jean, François Willot, Sabine Cantournet, Samuel Forest, Dominique Jeulin. Large-scale computations of effective elastic properties of rubber with carbon black fillers. International Journal for Multiscale Computational Engineering, 2011, 9, pp.271-303. ⟨10.1615/IntJMultCompEng.v9.i3.30⟩. ⟨hal-00661612⟩
  • Céline Lechat, Anthony R. Bunsell, Peter Davies. Tensile and creep behaviour of polyethylene terephthalate and polyethylene naphthalate fibres. Journal of Materials Science, 2011, 46, pp.528-533. ⟨10.1007/s10853-010-4999-x⟩. ⟨hal-00570295⟩
  • Aurélie Jean, Dominique Jeulin, Samuel Forest, Sabine Cantournet, Franck N'Guyen. A multiscale microstructure model of carbon black distribution in rubber. Journal of Microscopy, 2011, 241 (3), pp.243-260. ⟨10.1111/j.1365-2818.2010.03428.x⟩. ⟨hal-00585338⟩
  • Wolfgang Ludwig, Andrew King, Michael Herbig, Peter Reischig, J. Marrow, et al.. [La microstructure 3D des matériaux polycristallins vue sous la lumière synchrotron]. L'Actualité Chimique, 2011, 356-357, pp.62-67. ⟨hal-00646677⟩
  • Michel Jeandin. Des nanomatériaux au Big Crunch via la biomimétique. AMOPA, 2011, 194, pp.26-29. ⟨hal-00676024⟩
  • Sylvia Feld-Payet, Jacques Besson, Frédéric Feyel. Finite element analysis of damage in ductile structures using a nonlocal model combined with a three-field formulation. International Journal of Damage Mechanics, 2011, 20, pp.655-680. ⟨10.1177/1056789511405935⟩. ⟨hal-00619641⟩
  • T.J. Massart, B.C.N. Mercatoris, Benoît Piezel, P. Berke, Lucien Laiarinandrasana, et al.. Multi-scale modelling of heterogeneous shell structures. Computer Assisted Mechanics and Engineering Sciences, 2011, 18, pp.53-71. ⟨hal-00714256⟩
  • Laurent Baraton, Zhanbing He, Chang Seok Lee, Jean-Luc Maurice, Costel Sorin Cojocaru, et al.. Synthesis of few-layered graphene by ion implantation of carbon in nickel thin films. Nanotechnology, 2011, 22, 085601, 5 p. ⟨10.1088/0957-4484/22/8/085601⟩. ⟨hal-00557031⟩
  • Olivier Bouaziz, S. Allain, C.P. Scott, P. Cugy, Damien Barbier. High manganese austenitic twinning induced plasticity steels: A review of the microstructure properties relationships. Current Opinion in Solid State and Materials Science, 2011, 15, pp.141-168. ⟨10.1016/j.cossms.2011.04.002⟩. ⟨hal-00607330⟩
  • Gilles Rolland, Pierre Sallamand, Vincent Guipont, Michel Jeandin, Elodie Boller, et al.. Laser-induced damage in cold-sprayed composite coatings. Surface and Coatings Technology, 2011, 205, pp.4915-4927. ⟨10.1016/j.surfcoat.2011.04.103⟩. ⟨hal-00619392⟩
  • Mamane Oumarou, Dominique Jeulin, Jacques Renard. Étude numérique et statistique du comportement d'un composite thermoplastique. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2011, 21, pp.221-254. ⟨10.3166/rcma.21.221-254⟩. ⟨hal-00624115⟩
  • Pierre Bérard, Jean-Dominique Bartout, Magali Reytier, M. Lefrançois, Jacques Besson. Viscoplastic behavior of a FeCrAl alloy for high temperature steam electrolysis (HTSE) sealing applications between 700 °C and 900 °C. Materials Science and Engineering: A, 2011, 528, pp.4092-4097. ⟨10.1016/j.msea.2011.01.050⟩. ⟨hal-00585064⟩
  • Dimitris K. Christoulis, Serge Guetta, Vincent Guipont, Michel Jeandin. The influence of the substrate on the deposition of cold sprayed titanium : an experimental and numerical study. Journal of Thermal Spray Technology, 2011, 20, pp.523-533. ⟨10.1007/s11666-010-9608-7⟩. ⟨hal-00592015⟩
  • Thilo F. Morgeneyer, L. Helfen, I. Sinclair, Henry Proudhon, F. Xu, et al.. Ductile crack initiation and propagation assessed via in situ synchrotron radiation-computed laminography. Scripta Materialia, 2011, 65, pp.1010-1013. ⟨10.1016/j.scriptamat.2011.09.005⟩. ⟨hal-00652978⟩
  • Duy-Khanh Trinh, Samuel Forest. Generalized continuum overall modelling of periodic composite structures. Vietnam Journal of Mechanics, 2011, 33, pp.245-258. ⟨hal-00675643⟩
  • Karolina Siskova, Martin Kubala, Panagiotis Dallas, Dalibor Jancik, Alain Thorel, et al.. The effect of surface modification on the fluorescence and morphology of CdSe nanoparticles embedded in a 3D phosphazene-based matrix: nanowire-like quantum dots. Journal of Materials Chemistry, 2011, 21, pp.1086-1093. ⟨10.1039/C0JM02360D⟩. ⟨hal-00794904⟩
  • Karolina Siskova, Blanka Vlckova, Pierre Yves Turpin, Alain Thorel, Marek Prochazka. Laser ablation of silver in aqueous solutions of organic species : probing Ag nanoparticle−adsorbate systems evolution by surface-enhanced raman and surface plasmon extinction spectra. Journal of Physical Chemistry C, 2011, 115, pp.5404-5412. ⟨10.1021/jp110907d⟩. ⟨hal-00602501⟩
  • Fabrice Detrez, Sabine Cantournet, Roland Seguela. Plasticity/damage coupling in semi-crystalline polymers prior to yielding: Micromechanisms and damage law identification. Polymer, 2011, 52, pp.1998-2008. ⟨10.1016/j.polymer.2011.03.012⟩. ⟨hal-00592106⟩
  • S. Herenu, Mohamed Sennour, M. Balbi, Iris Alvarez-Armas, Alain Thorel, et al.. Influence of dislocation glide on the spinodal decomposition of fatigued duplex stainless steels. Materials Science and Engineering: A, 2011, 528, pp.7636-7640. ⟨10.1016/j.msea.2011.06.070⟩. ⟨hal-00624066⟩
  • Vincent Maurel, Mark Harvey, Luc Rémy. Aluminium oxide spallation on NiAl coating induced by compression. Surface and Coatings Technology, 2011, 205, pp.3158-3166. ⟨10.1016/j.surfcoat.2010.11.032⟩. ⟨hal-00570298⟩
  • Lucien Laiarinandrasana, Clémence Devilliers, S. Oberti, E. Gaudichet-Maurin, B. Fayolle, et al.. Ring tests on high density polyethylene : full investigation assisted by finite element modeling. International Journal of Pressure Vessels and Piping, 2011, 88 (1), pp.1-10. ⟨10.1016/j.ijpvp.2010.12.002⟩. ⟨hal-00565851⟩
  • Kais Ammar, Benoit Appolaire, Georges Cailletaud, Samuel Forest. Phase field modeling of elasto-plastic deformation induced by diffusion controlled growth of a misfitting spherical precipitate. Philosophical Magazine Letters, 2011, 91, pp.164-172. ⟨10.1080/09500839.2010.541891⟩. ⟨hal-00585395⟩
  • Fabrice Barbe, Romain Quey. A numerical modelling of 3D polycrystal-to-polycrystal diffusive phase transformations involving crystal plasticity. International Journal of Plasticity, 2011, 27 (6), pp.823-840. ⟨10.1016/j.ijplas.2010.09.008⟩. ⟨hal-00595995⟩
  • Guillaume Boisot, Lucien Laiarinandrasana, Jacques Besson, C. Fond, Gilles Hochstetter. Experimental investigations and modeling of volume change induced by void growth in polyamide 11. International Journal of Solids and Structures, 2011, 48 (19), pp.2642-2654. ⟨10.1016/j.ijsolstr.2011.05.016⟩. ⟨hal-00624022⟩
  • Tristan Petit, Jean-Charles Arnault, Hugues Girard, Mohamed Sennour, Philippe Bergonzo. Early stages of surface graphitization on nanodiamond probed by x-ray photoelectron spectroscopy. Physical Review B: Condensed Matter and Materials Physics (1998-2015), 2011, 84 (Septembre), 233407, 5 p. ⟨10.1103/PhysRevB.84.233407⟩. ⟨hal-00675687⟩
  • Lucien Laiarinandrasana, C. Devilliers, Sandrine Oberti, E. Gaudichet, Bruno Fayolle, et al.. Ring tests on high density polyethylene: Full investigation assisted by finite element modeling. International Journal of Pressure Vessels and Piping, 2011, 88 (1), pp.1-10. ⟨10.1016/j.ijpvp.2010.12.002⟩. ⟨hal-02455214⟩
  • Djillali Kaddour, Anne-Françoise Gourgues-Lorenzon, J.C. Brachet, Laurence Portier, André Pineau. Microstructural influence on high temperature creep flow of Zr–1%NbO alloy in near-α, (α + β), and β temperature ranges in a high vacuum environment. Journal of Nuclear Materials, 2011, 408, pp.116-124. ⟨10.1016/j.jnucmat.2010.11.025⟩. ⟨hal-00553181⟩
  • Francisco de La Peña, Marie-Hélène Berger, Jean-François Hochepied, F. Dynys, Odile Stephan, et al.. Mapping titanium and tin oxide phases using EELS: An application of independent component analysis. Ultramicroscopy, 2011, 111, pp.169-176. ⟨10.1016/j.ultramic.2010.10.001⟩. ⟨hal-00553165⟩
  • Ozgur Aslan, Nicolas Cordero, Anais Gaubert, Samuel Forest. Micromorphic approach to single crystal plasticity and damage. International Journal of Engineering Science, 2011, 49, pp.1311-1325. ⟨10.1016/j.ijengsci.2011.03.008⟩. ⟨hal-00652967⟩
  • B. Bourdiliau, Guy Marc Decroix, Xavier Averty, P. Wident, Yves Bienvenu. Comparative study on Charpy specimen reconstitution techniques. Nuclear Engineering and Design, 2011, 241, pp.2722-2731. ⟨10.1016/j.nucengdes.2011.06.012⟩. ⟨hal-00652943⟩
  • Lakhdar Taleb, Georges Cailletaud. Cyclic accumulation of the inelastic strain in the 304L SS under stress control at room temperature: Ratcheting or creep ?. International Journal of Plasticity, 2011, 27, pp.1936-1958. ⟨10.1016/j.ijplas.2011.02.001⟩. ⟨hal-00652972⟩
  • R. Mnif, R. Elleuch, K. Elleuch, Nader Haddar, F. Halouani. Effect of forging on cyclic hardening behavior of CW 614 brass alloy. Strength of Materials, 2011, 43, pp.217-223. ⟨10.1007/s11223-011-9288-7⟩. ⟨hal-00661607⟩
  • Vincent Maurel, P. de Bodman, Luc Rémy. Influence of substrate strain anisotropy in TBC system failure. Surface and Coatings Technology, 2011, 206, pp.1634-1639. ⟨10.1016/j.surfcoat.2011.06.041⟩. ⟨hal-00662334⟩
  • Christophe Courcier, Vincent Maurel, Luc Rémy, Stéphane Quilici, Isabelle Rouzou, et al.. Interfacial damage based life model for EB-PVD thermal barrier coating. Surface and Coatings Technology, 2011, 205, pp.3763-3773. ⟨10.1016/j.surfcoat.2011.01.008⟩. ⟨hal-00585091⟩
  • Lucien Laiarinandrasana, E. Gaudichet, S. Oberti, Clémence Devilliers. Effects of aging on the creep behaviour and residual lifetime assessment of polyvinyl chloride (PVC) pipes. International Journal of Pressure Vessels and Piping, 2011, 88, pp.99-108. ⟨10.1016/j.ijpvp.2011.01.002⟩. ⟨hal-00595870⟩
  • Samuel Forest, Duy-Khanh Trinh. Generalized continua and non-homogeneous boundary conditions in homogenisation methods. Journal of Applied Mathematics and Mechanics / Zeitschrift für Angewandte Mathematik und Mechanik, 2011, 91, pp.90-109. ⟨10.1002/zamm.201000109⟩. ⟨hal-00585332⟩
  • Yves Bienvenu. La recherche en sciences et génie des matériaux dans les écoles des mines : le centre des matériaux de Mines ParisTech. Revue des ingénieurs des écoles nationales supérieures des mines : Paris, Saint-Etienne, Nancy, 2011, 451, pp.46-48. ⟨hal-00800784⟩
  • Michael Herbig, Andrew King, Peter Reischig, Henry Proudhon, Eric M. Lauridsen, et al.. 3D growth of a short fatigue crack within a polycrystalline microstructure studied using combined diffraction and phase-contrast X-ray tomography. Acta Materialia, 2011, 59, pp.590-601. ⟨10.1016/j.actamat.2010.09.063⟩. ⟨hal-00527628⟩
  • S. Camara, Anthony R. Bunsell, Alain Thionnet, David H. Allen. Determination of lifetime probabilities of carbon fibre composite plates and pressure vessels for hydrogen storage. International Journal of Hydrogen Energy, 2011, 36, pp.6031-6038. ⟨10.1016/j.ijhydene.2010.12.069⟩. ⟨hal-00595889⟩
  • A. Ktari, Nader Haddar, Alain Köster, Alexandra Marie-Louise Toure. Numerical computation of thermal fatigue crack growth of cast iron. Fatigue and Fracture of Engineering Materials and Structures, 2011, 34, pp.498-509. ⟨10.1111/j.1460-2695.2010.01542.x⟩. ⟨hal-00607081⟩
  • Benjamin Fournier, Maxime Sauzay, André Pineau. Micromechanical model of the high temperature cyclic behavior of 9-12%Cr martensitic steels. International Journal of Plasticity, 2011, 27, pp.1803-1816. ⟨10.1016/j.ijplas.2011.05.007⟩. ⟨hal-00624113⟩
  • S. Allain, O. Bouaziz, T. Lebedkina, M. Lebyodkin. Relationship between relaxation mechanisms and strain aging in an austenitic FeMnC steel. Scripta Materialia, 2011, 64, pp.741-744. ⟨10.1016/j.scriptamat.2010.12.039⟩. ⟨hal-00585371⟩
  • Y.Z. Wang, Anthony Chesnaud, Emile Bévillon, Guilhem Dezanneau, Jinlong Yang. Synthesis and electrical properties of nanostructured Ba2SnYO5.5 proton conductor. Ceramics International, 2011, 37, pp.3351-3355. ⟨10.1016/j.ceramint.2011.05.135⟩. ⟨hal-00652957⟩
  • Daniela d'Elia, Christian Beauger, Jean-François Hochepied, Arnaud Rigacci, Marie-Hélène Berger, et al.. Impact of three different TiO2 morphologies on hydrogen evolution by methanol assisted water splitting: Nanoparticles, nanotubes and aerogels. International Journal of Hydrogen Energy, 2011, 36 (22), pp.14360-14373. ⟨10.1016/j.ijhydene.2011.08.007⟩. ⟨hal-00628795⟩
  • Alain Thionnet. Conceptualisation et classification des problèmes de fatigue mécanique. Comptes Rendus Mécanique, 2011, 339, pp.573-590. ⟨10.1016/j.crme.2011.05.010⟩. ⟨hal-00636587⟩
  • Hiroki Tsukigase, Yoshikazu Suzuki, Marie-Hélène Berger, Takashi Sagawa, Susumu Yoshikawa. Wet chemical synthesis and self-assembly of SnS2 nanoparticles on TiO2 for quantum dot-sensitized solar cells. Journal of Nanoscience and Nanotechnology, 2011, 11, pp.3215-3221. ⟨10.1166/jnn.2011.3598⟩. ⟨hal-00619528⟩
  • Ozgur Aslan, Stéphane Quilici, Samuel Forest. Numerical modeling of fatigue crack growth in single crystals based on microdamage theory. International Journal of Damage Mechanics, 2011, 20, pp.681-705. ⟨10.1177/1056789510395738⟩. ⟨hal-00619634⟩
  • S. Hollner, Benjamin Fournier, J. Le Pendu, C. Caes, Ivan Tournié, et al.. Influence de traitements thermo-mécaniques sur les performances en fluage et en fatigue d'aciers martensitiques à 9% Cr. Revue de Métallurgie, 2011, 108, pp.75-81. ⟨10.1051/metal/2011020⟩. ⟨hal-00636596⟩
  • Dhouha Mellouli, Nader Haddar, Alain Köster, Alexandra Marie-Louise Toure. Thermal fatigue of cast irons for automotive application. Materials & Design, 2011, 32, pp.1508-1514. ⟨10.1016/j.matdes.2010.10.025⟩. ⟨hal-00595994⟩
  • Yanzhong Wang, Anthony Chesnaud, Emile Bévillon, Jinlong Yang, Guilhem Dezanneau. Synthesis, structure and protonic conduction of BaSn0.875M0.125O3-d (M [ Sc, Y, In and Gd). International Journal of Hydrogen Energy, 2011, 36, pp.7688-7695. ⟨10.1016/j.ijhydene.2011.03.105⟩. ⟨hal-00594186⟩
  • S.N. Terekhov, P. Mojzes, S.M. Kachan, N.I. Mukhurov, S.P. Zhvavyi, et al.. A comparative study of surface-enhanced Raman scattering from silver-coated anodic aluminum oxide and porous silicon. Journal of Raman Spectroscopy, 2011, 42, pp.12-20. ⟨10.1002/jrs.2661⟩. ⟨hal-00602705⟩
  • Y.Z. Wang, Anthony Chesnaud, Emile Bévillon, Jinlong Yang, Guilhem Dezanneau. Influence of ZnO additive on the properties of Y-doped BaSnO3 proton conductor. Materials Science and Engineering: B, 2011, 176, pp.1178-1183. ⟨10.1016/j.mseb.2011.06.009⟩. ⟨hal-00652894⟩
  • Toufik Kanit, Samuel Forest, Dominique Jeulin, Franck N'Guyen, S. Singleton. Virtual improvement of ice cream properties by computational homogenization of microstructures. Mechanics Research Communications, 2011, 38 (2), pp.136-140. ⟨10.1016/j.mechrescom.2011.01.005⟩. ⟨hal-00574743⟩
  • Eduard R. Oberaigner, Michael Fischlschweiger. A statistical mechanics approach describing martensitic phase transformation. Mechanics of Materials, 2011, 43, pp.467-475. ⟨10.1016/j.mechmat.2011.06.001⟩. ⟨hal-00619592⟩
  • O. Lavigne, Catherine Alemany-Dumont, Bernard Normand, Marie-Hélène Berger, Cecilie Duhamel, et al.. The effect of nitrogen on the passivation mechanisms and electronic properties of chromium oxide layers. Corrosion Science, 2011, 53, pp.2087-2096. ⟨10.1016/j.corsci.2011.02.026⟩. ⟨hal-00329660⟩
  • Laurent Berthe, M. Arrigoni, M. Boustie, J.-P. Cuq-Lelandais, Cédric Broussillou, et al.. State-of-the-art laser adhesion test (LASAT). Nondestructive Testing and Evaluation, 2011, 26 (3-4), pp.303-317. ⟨10.1080/10589759.2011.573550⟩. ⟨hal-00652904⟩
  • Yannick Pannier, Henry Proudhon, Christian Mocuta, Dominique Thiaudière, Sabine Cantournet. In situ multi‐axial loading frame to probe elastomers using X‐ray scattering. Journal of Synchrotron Radiation, 2011, 18, pp.907-911. ⟨10.1107/S0909049511024861⟩. ⟨hal-00675996⟩
  • Nicolas Saintier, Georges Cailletaud, Roland Piques. Cyclic loadings and crystallization of natural rubber: An explanation of fatigue crack propagation reinforcement under a positive loading ratio. Materials Science and Engineering: A, 2011, 528 (3), pp.1078-1086. ⟨10.1016/j.msea.2010.09.079⟩. ⟨hal-00553173⟩
  • Clémence Devilliers, Bruno Fayolle, Lucien Laiarinandrasana, Sandrine Oberti, Emmanuelle Gaudichet-Maurin. Kinetics of chlorine-induced polyethylene degradation in water pipes. Polymer Degradation and Stability, 2011, 96 (7), pp.1361-1368. ⟨10.1016/j.polymdegradstab.2011.03.013⟩. ⟨hal-02455171⟩
  • Camille Chateau, Lionel Gélébart, Michel Bornert, Jérôme Crépin, Elodie Boller, et al.. In-situ X-ray microtomography characterization of damage in SiC/SiC minicomposites. Composites Science and Technology, 2011, 71 (6), pp.916-924. ⟨10.1016/j.compscitech.2011.02.008⟩. ⟨hal-00736300⟩
  • Henry Proudhon, Stéphanie Basseville. Finite element analysis of fretting crack propagation. Engineering Fracture Mechanics, 2011, 78 (4), pp.685-694. ⟨10.1016/j.engfracmech.2010.11.016⟩. ⟨hal-00567222⟩
  • Jean-Charles Arnault, Tristan Petit, Hugues Girard, Anthony Chavanne, Céline Gesset, et al.. Surface chemical modifications and surface reactivity of nanodiamonds hydrogenated by CVD plasma . Physical Chemistry Chemical Physics, 2011, 13, pp.11481-11487. ⟨10.1039/C1CP20109C⟩. ⟨hal-01271867⟩
  • David Ryckelynck, Djamel Missoum-Benziane, Sophie Cartel, Jacques Besson. A robust adaptive model reduction method for damage simulations. Computational Materials Science, 2011, 50, pp.1597-1605. ⟨10.1016/j.commatsci.2010.11.034⟩. ⟨hal-00585356⟩
  • Cyrille Allery, Aziz Hamdouni, David Ryckelynck, N. Verdon. A priori reduction method for solving the two-dimensional Burgers' equations. Applied Mathematics and Computation, 2011, 217, pp.6671-6679. ⟨10.1016/j.amc.2011.01.065⟩. ⟨hal-00585095⟩
  • Vladislav Yastrebov, Julian Durand, Henry Proudhon, Georges Cailletaud. Rough surface contact analysis by means of the Finite Element Method and of a new reduced model. Comptes Rendus Mécanique, 2011, 339, pp.473-490. ⟨10.1016/j.crme.2011.05.006⟩. ⟨hal-00624090⟩
  • Kinga A. Malinger, Aude Maguer, Alain Thorel, Alain Gaunand, Jean-François Hochepied. Crystallization of anatase nanoparticles from amorphous precipitate by a continuous hydrothermal process. Chemical Engineering Journal, 2011, 174, pp.445-451. ⟨10.1016/j.cej.2011.08.065⟩. ⟨hal-00652983⟩
  • Huaidong Wang, Clotilde Berdin, Matthieu Mazière, Samuel Forest, Claude Prioul, et al.. Portevin-Le Chatelier (PLC) instabilities and slant fracture in C-Mn steel round tensile specimens. Scripta Materialia, 2011, 64, pp.430-433. ⟨10.1016/j.scriptamat.2010.11.005⟩. ⟨hal-00579436⟩
  • Kacem Sai, Lucien Laiarinandrasana, I. Ben Naceur, Jacques Besson, M. Jeridi, et al.. Multi-mechanism damage-plasticity model for semi-crystalline polymer: Creep damage of notched specimen of PA6. Materials Science and Engineering: A, 2011, 528, pp.1087-1093. ⟨10.1016/j.msea.2010.09.071⟩. ⟨hal-00553177⟩
  • Alain Thorel. Réflexions sur la science des matériaux. Matériaux & Techniques, 2011, 99, pp.606-610. ⟨hal-00684681⟩
  • Maria Teresa Buscaglia, Mohamed Sennour, Vincenzo Buscaglia, Carlo Bottino, Vishwanath Kalyani, et al.. Formation of Bi4Ti3O12 One-Dimensional Structures by Solid-State Reactive Diffusion. From Core−Shell Templates to Nanorods and Nanotubes. Crystal Growth & Design, 2011, 11, pp.1394-1401. ⟨10.1021/cg101697r⟩. ⟨hal-00602832⟩
  • Hiroki Tsukigase, Yoshikazu Suzuki, Marie-Hélène Berger, Takashi Sagawa, Susumu Yoshikawa. Synthesis of SnS nanoparticles by SILAR method for quantum dot-sensitized solar cells. Journal of Nanoscience and Nanotechnology, 2011, 11, pp.1914-1922. ⟨10.1166/jnn.2011.3582⟩. ⟨hal-00619399⟩
  • André Pineau. Local approach of brittle fracture in metallic welded structures. Journal of the Japan Welding Society, 2011, 80 (1), pp.70-83. ⟨10.2207/jjws.80.70⟩. ⟨hal-00585070⟩
  • Hélène Lefaix-Jeuland, Loic Marchetti, Stéphane Perrin, Michèle Pijolat, Mohamed Sennour, et al.. Oxidation kinetics and mechanisms of Ni-base alloys in pressurised water reactor primary conditions: Influence of subsurface defects. Corrosion Science, 2011, 53 (12), pp.3914-3922. ⟨10.1016/j.corsci.2011.07.024⟩. ⟨hal-00628750⟩
  • Michel Jeandin. Du Big Bang aux nanomatériaux. AMOPA, 2011, 193, pp.37-40. ⟨hal-00676010⟩
  • N. Verdon, Cyrille Allery, Claudine Beghein, Aziz Hamdouni, David Ryckelynck. Reduced-order modelling for solving linear and non-linear equations. International Journal for Numerical Methods in Biomedical Engineering, 2011, 27, pp.43-58. ⟨10.1002/cnm.1286⟩. ⟨hal-00541925⟩
  • Delphine Reche, T. Sturel, Olivier Bouaziz, A. Col, Anne-Françoise Gourgues-Lorenzon. Damage development in low alloy TRIP-aided steels during air-bending. Materials Science and Engineering: A, 2011, 528, pp.5241-5250. ⟨10.1016/j.msea.2011.03.042⟩. ⟨hal-00592250⟩
  • Stéphanie Basseville, Eva Héripré, Georges Cailletaud. Numerical simulation of the third body in fretting problems. Wear, 2011, 270, pp.876-887. ⟨10.1016/j.wear.2011.02.016⟩. ⟨hal-00569974⟩
  • Jianqiang Chen, Yazid Madi, Thilo F. Morgeneyer, Jacques Besson. Plastic flow and ductile rupture of a 2198 Al–Cu–Li aluminum alloy. Computational Materials Science, 2011, 50, pp.1365-1371. ⟨10.1016/j.commatsci.2010.06.029⟩. ⟨hal-00569967⟩
  • Thilo F. Morgeneyer, Jacques Besson. Flat to slant ductile fracture transition: Tomography examination and simulations using shear-controlled void nucleation. Scripta Materialia, 2011, 65, pp.1002-1005. ⟨10.1016/j.scriptamat.2011.09.004⟩. ⟨hal-00658608⟩
  • C. Guillemer, Michel Clavel, Georges Cailletaud. Cyclic behavior of extruded magnesium: Experimental, microstructural and numerical approach. International Journal of Plasticity, 2011, 27, pp.2068-2084. ⟨10.1016/j.ijplas.2011.06.002⟩. ⟨hal-00652975⟩
  • Rattanak Lim, Maxime Sauzay, France Dalle, Ivan Tournié, Patrick Bonnaillie, et al.. Modelling and experimental study of the tertiary creep stage of Grade 91 steel. International Journal of Fracture, 2011, 169, pp.213-228. ⟨10.1007/s10704-011-9585-y⟩. ⟨hal-00605165⟩
  • Daria Vladikova, Zdravko Stoynov, Gergana Raikova, Alain Thorel, Anthony Chesnaud, et al.. Impedance spectroscopy studies of dual membrane fuel cell. Electrochimica Acta, 2011, 56, pp.7955-7962. ⟨10.1016/j.electacta.2011.02.007⟩. ⟨hal-00662342⟩
  • Cédric Broussillou, M. Andrieux, M. Herbst-Ghysel, Michel Jeandin, J.S. Jaime-Ferrer, et al.. Sulfurization of Cu-In electrodeposited precursors for CuInS2-based solar cells. Solar Energy Materials and Solar Cells, 2011, 95, pp.S13-S17. ⟨10.1016/j.solmat.2011.01.037⟩. ⟨hal-00592084⟩
  • Samuel Forest, Nicolas Cordero, Esteban P. Busso. First vs. second gradient of strain theory for capillarity effects in an elastic fluid at small length scales. Computational Materials Science, 2011, 50, pp.1299-1304. ⟨10.1016/j.commatsci.2010.03.048⟩. ⟨hal-00569981⟩
  • Ibrahima Gueye, Saber El Arem, Frédéric Feyel, François-Xavier Roux, Georges Cailletaud. A new parallel sparse direct solver : presentation and numerical experiments in large-scale structural mechanics parallel computing. International Journal for Numerical Methods in Engineering, 2011, 88, pp.370-384. ⟨10.1002/nme.3179⟩. ⟨hal-00598056⟩
  • Thomas Vilaro, Christophe Colin, Jean-Dominique Bartout. As-Fabricated and Heat-Treated Microstructures of the Ti-6Al-4V Alloy Processed by Selective Laser Melting. Metallurgical and Materials Transactions A, 2011, 42, pp.3190-3199. ⟨10.1007/s11661-011-0731-y⟩. ⟨hal-00624108⟩
  • Olivier Bouaziz, J.P. Masse, Yves Brechet. An analytical description of the mechanical hysteresis of entangled materials during loading–unloading in uniaxial compression. Scripta Materialia, 2011, 64, pp.107-109. ⟨10.1016/j.scriptamat.2010.09.007⟩. ⟨hal-00542495⟩
  • Jean-François Hochepied, Marie-Hélène Berger, Fred Dynys, Arnaud Dessombz, Ali Sayir. Aqueous Co-precipitated Ti0.5Sn0.5O2 nanopowders as precursors for dense spinodally decomposed ceramics. Journal of the American Ceramic Society, 2011, 94 (12), pp.4226-4230. ⟨10.1111/j.1551-2916.2011.04797.x⟩. ⟨hal-00662263⟩
  • E. Gaudichet-Maurin, Clémence Devilliers, P. Fernandes, S. Oberti, J.M. Lucatelli, et al.. Interactions chimiques des tubes en polyéthylène avec le chlore en eau potable. TSM. Techniques Sciences Méthodes – Génie urbain, génie rural, 2011, 9 (Septembre), pp.28-38. ⟨hal-00659435⟩
  • Zainab H Elmabrouk, Florence Vincent, Meng Zhang, Nicola L Smith, Johan P Turkenburg, et al.. Crystal structures of a family 8 polysaccharide lyase reveal open and highly occluded substrate-binding cleft conformations. Proteins - Structure, Function and Bioinformatics, 2010, 79, pp.965 - 974. ⟨10.1002/prot.22938⟩. ⟨hal-03219331⟩
  • Mohamed Sennour, Loïc Marchetti, Frantz Martin, Stéphane Perrin, Régine Molins, et al.. A detailed TEM and SEM study of Ni-base alloys oxide scales formed in primary conditions of pressurized water reactor. Journal of Nuclear Materials, 2010, 402 (2-3), pp.147-156. ⟨10.1016/j.jnucmat.2010.05.010⟩. ⟨hal-04161290⟩
  • K.E. Aifantis, A. Konstantinidis, Samuel Forest. Modeling strain localization bands in metal foams. Journal of computational and theoretical nanoscience, 2010, 7, pp.360-366. ⟨10.1166/jctn.2010.1367⟩. ⟨hal-00461471⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of joint line remnant on fatigue lifetime of friction stir welded Al-Cu-Li alloy. Science and Technology of Welding & Joining, 2010, 15, pp.694-698. ⟨10.1179/136217110X12813393169453⟩. ⟨hal-00553188⟩
  • Vincent Guipont, Michel Jeandin, Gilles Rolland, Dominique Jeulin, Charles Peyrega, et al.. Microstructures of cold sprayed coatings investigated by X-ray microtomography. Thermal Spray Bulletin, 2010, pp.140-147. ⟨hal-00565865⟩
  • Henry Proudhon, Nicolas Vaxelaire, S. Labat, Samuel Forest, O. Thomas. Finite element simulations of coherent diffraction in elastoplastic polycrystalline aggregates. Comptes Rendus. Physique, 2010, 11, pp.293-303. ⟨10.1016/j.crhy.2010.07.009⟩. ⟨hal-00542459⟩
  • M. Pineda-Sanchez, Francisco Chinesta, J. Roger-Folch, M. Riera-Guasp, J. Pérez-Cruz, et al.. Simulation of skin effect via separated representations. COMPEL: The International Journal for Computation and Mathematics in Electrical and Electronic Engineering, 2010, 29 (4), pp.919-929. ⟨10.1108/03321641011044334⟩. ⟨hal-01008914⟩
  • Yasuhiro Shinohara, Yazid Madi, Jacques Besson. A combined phenomenological model for the representation of anisotropic hardening behavior in high strength steel line pipes. European Journal of Mechanics - A/Solids, 2010, 29 (6), pp.917-927. ⟨10.1016/j.euromechsol.2010.06.003⟩. ⟨hal-00687352⟩
  • D. Steglich, H. Wafai, Jacques Besson. Interaction between anisotropic plastic deformation and damage evolution in Al 2198 sheet metal. Engineering Fracture Mechanics, 2010, 77, pp.3501-3518. ⟨10.1016/j.engfracmech.2010.08.021⟩. ⟨hal-00542469⟩
  • Peter Davies, Anthony R. Bunsell, Emmanuel Chailleux. Tensile fatigue behaviour of PBO fibres. Journal of Materials Science, 2010, 45, pp.6395-6400. ⟨10.1007/s10853-010-4721-z⟩. ⟨hal-00541361⟩
  • Cédric Broussillou, G. Savidand, L. Parissi, J.S. Jaime-Ferrer, P.P. Grand, et al.. Rapid thermal processing of CuInSe2 electroplated precursors for CuIn(S,Se)2-based thin film solar cells. Energy Procedia, 2010, 2 (1), pp.9-17. ⟨10.1016/j.egypro.2010.07.004⟩. ⟨hal-00509916⟩
  • Emmanuel Chateau, Luc Rémy. Oxidation-assisted creep damage in a wrought nickel-based superalloy : experiments and modelling. Materials Science and Engineering: A, 2010, 527, pp.1655-1664. ⟨10.1016/j.msea.2009.10.054⟩. ⟨hal-00461508⟩
  • Matthieu Le Saux, Jacques Besson, Sébastien Carassou, Christophe Poussard, Xavier Averty. Behavior and failure of uniformly hydrided Zircaloy-4 fuel claddings between 25 °C and 480 °C under various stress states, including RIA loading conditions. Engineering Failure Analysis, 2010, 17, pp.683-700. ⟨10.1016/j.engfailanal.2009.07.001⟩. ⟨hal-00461500⟩
  • Stéphanie Hollner, Benjamin Fournier, J. Le Pendu, T. Cozzika, I. Tournié, et al.. High-temperature mechanical properties improvement on modified 9Cr–1Mo martensitic steel through thermomechanical treatments. Journal of Nuclear Materials, 2010, 405, pp.101-108. ⟨10.1016/j.jnucmat.2010.07.034⟩. ⟨hal-00523277⟩
  • Audric Saillard, Mohammed Cherkaoui, Laurent Capolungo, Esteban P Busso. Stress influence on high temperature oxide scale growth: modeling and investigation on a thermal barrier coating system.. Philosophical Magazine, 2010, 90, pp.2651-2676. ⟨10.1080/14786431003680780⟩. ⟨hal-00596605⟩
  • E.R. Baxter, J.S. Bach, Fabrice Detrez, Sabine Cantournet, Laurent Corté, et al.. Augmentation of bone tunnel healing in anterior cruciate ligament grafts : application of calcium phosphates and other materials. Tissue Engineering: Parts A, B, and C, 2010, 1, 712370, 12 p. ⟨10.4061/2010/712370⟩. ⟨hal-00570311⟩
  • Wolfgang Ludwig, A. King, M. Herbig, Peter Reischig, J.T. Marrow, et al.. Characterization of polycrystalline materials using synchrotron X-ray imaging and diffraction techniques. JOM Journal of the Minerals, Metals and Materials Society, 2010, décembre, pp.22-28. ⟨10.1007/s11837-010-0176-6⟩. ⟨hal-00534470⟩
  • Samuel Forest, Elias Aifantis. Some links between recent gradient thermo-elasto-plasticity theories and the thermomechanics of generalized continua. International Journal of Solids and Structures, 2010, 47 (25-26), pp.3367-3376. ⟨10.1016/j.ijsolstr.2010.07.009⟩. ⟨hal-00542445⟩
  • David Ryckelynck, Djamel Missoum-Benziane. Multi-level A Priori Hyper-Reduction of mechanical models involving internal variables. Computer Methods in Applied Mechanics and Engineering, 2010, 199, pp.1134-1142. ⟨10.1016/j.cma.2009.12.003⟩. ⟨hal-00461492⟩
  • Dimitris K. Christoulis, Serge Guetta, E. Irissou, Vincent Guipont, Marie-Hélène Berger, et al.. Cold-spraying coupled to nano-pulsed Nd-YaG laser surface pre-treatment. Journal of Thermal Spray Technology, 2010, 19, pp.1062-1073. ⟨10.1007/s11666-010-9500-5⟩. ⟨hal-00542452⟩
  • Josserand Bassery, Vladimir Gantchenko, Jacques Renard. Caractérisation multiaxiale des interfaces multimatériaux : application aux assemblages collés. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2010, 20, pp.135-152. ⟨10.3166/rcma.20.135-152⟩. ⟨hal-00605463⟩
  • Julie Lorthios, Franck N'Guyen, Anne-Françoise Gourgues-Lorenzon, Thilo F. Morgeneyer, P. Cugy. Damage observation in a high-manganese austenitic TWIP steel by synchrotron radiation computed tomography. Scripta Materialia, 2010, 63, pp.1220-1223. ⟨10.1016/j.scriptamat.2010.08.042⟩. ⟨hal-00541294⟩
  • Lakhdar Taleb, Georges Cailletaud. An updated version of the multimechanism model for cyclic plasticity. International Journal of Plasticity, 2010, 26, pp.859-874. ⟨10.1016/j.ijplas.2009.11.002⟩. ⟨hal-00481232⟩
  • Matthieu Mazière, Jacques Besson, Samuel Forest, Benoit Tanguy, Hervé Chalons, et al.. Numerical aspects in the finite element simulation of the Portevin–Le Chatelier effect. Computer Methods in Applied Mechanics and Engineering, 2010, 199, pp.734-754. ⟨10.1016/j.cma.2009.11.004⟩. ⟨hal-00456171⟩
  • Nadia Souaï, Nathalie Bozzolo, Loic Nazé, Yvan Chastel, Roland E. Logé. About the possibility of grain boundary engineering via hot-working in a nickel-base superalloy. Scripta Materialia, 2010, 62, pp.Pages 851-854. ⟨10.1016/j.scriptamat.2010.02.019⟩. ⟨hal-00481433⟩
  • Benjamin Fournier, M. Salvi, F. Dalle, Y. de Carlan, Christel Caës, et al.. Lifetime prediction of 9–12%Cr martensitic steels subjected to creep–fatigue at high temperature. International Journal of Fatigue, 2010, 32, pp.971-978. ⟨10.1016/j.ijfatigue.2009.10.017⟩. ⟨hal-00461460⟩
  • Anthony R. Bunsell, Alain Thionnet. Life prediction for carbon fibre filament wound composite structures. Philosophical Magazine, 2010, 90, pp.4129-4146. ⟨10.1080/14786430903575140⟩. ⟨hal-00596598⟩
  • Jacques Besson. Continuum models of ductile fracture : A review. International Journal of Damage Mechanics, 2010, 19, pp.3-52. ⟨10.1177/1056789509103482⟩. ⟨hal-00550957⟩
  • Olivier Bouaziz, Patrick Barges, Philippe Maugis, Mingxin Huang. A nanometre-sized porous phase in iron–carbon–boron system. Materials Letters, 2010, 64, pp.2559-2561. ⟨10.1016/j.matlet.2010.08.004⟩. ⟨hal-00523252⟩
  • Lionel Gelebart, Camille Chateau, Michel Bornert, Jérôme Crépin, Elodie Boller. X-ray tomographic characterization of the macroscopic porosity of chemical vapor infiltration SIC/SIC composites: effects on the elastic behavior. International Journal of Applied Ceramic Technology, 2010, 7, pp.348-360. ⟨10.1111/j.1744-7402.2009.02470.x⟩. ⟨hal-00491048⟩
  • Alain Thionnet. From fracture to damage mechanics: a behavior law for microcracked composites using the concept of crack opening mode. Composite Structures, 2010, 92, pp.780-794. ⟨10.1016/j.compstruct.2009.08.047⟩. ⟨hal-00438813⟩
  • Gilles Rousselier, F. Barlat, J.W. Yoon. A novel approach for anisotropic hardening modeling. Part II: Anisotropic hardening in proportional and non-proportional loadings, application to initially isotropic material. International Journal of Plasticity, 2010, 26, pp.1029-1049. ⟨10.1016/j.ijplas.2010.01.001⟩. ⟨hal-00509789⟩
  • Yoann Guilhem, Stéphanie Basseville, Francois Curtit, Jean-Michel Stephan, Georges Cailletaud. Investigation of the effect of grain clusters on fatigue crack initiation in polycrystals. International Journal of Fatigue, 2010, 32, pp.1748-1763. ⟨10.1016/j.ijfatigue.2010.04.003⟩. ⟨hal-00509802⟩
  • David Embury, Olivier Bouaziz. Steel-based composites : driving forces and classifications. Annual Review of Materials Science, 2010, 40, pp.213-241. ⟨10.1146/annurev-matsci-070909-104438⟩. ⟨hal-00523239⟩
  • David Ryckelynck, Djamel Missoum-Benziane, Andrey Musienko, Georges Cailletaud. Toward «green» mechanical simulations in materials science : hyper-reduction of a polycrystal plasticity model. Revue Européenne de Mécanique Numérique/European Journal of Computational Mechanics, 2010, 19 (4), pp.365-388. ⟨10.3166/ejcm.19.365-388⟩. ⟨hal-00523243⟩
  • Nicolas Vaxelaire, Henry Proudhon, S. Labat, C. Kirchlechner, J. Keckes, et al.. Methodology for studying strain inhomogeneities in polycrystalline thin films during in situ thermal loading using coherent x-ray diffraction. New Journal of Physics, 2010, 12 (3), 12 p. ⟨10.1088/1367-2630/12/3/035018⟩. ⟨hal-00491060⟩
  • Damien Barré, Christophe Briancon, Fabien Cheret, Jean Pierre Jeandreau, Michel Leroy, et al.. Assemblages collés multimatériaux. Essais et modélisation de liaisons bois-composite pour application marine. Revue des composites et des matériaux avancés = Journal of Composite and Advanced Materials, 2010, 20, pp.153-185. ⟨10.3166/rcma.20.153-185⟩. ⟨hal-00605466⟩
  • C. Landron, Olivier Bouaziz, Eric Maire, Jérôme Adrien. Characterization and modeling of void nucleation by interface decohesion in dual phase steels. Scripta Materialia, 2010, 63, pp.973-976. ⟨10.1016/j.scriptamat.2010.07.021⟩. ⟨hal-00523143⟩
  • A. Boubakri, Nader Haddar, K. Elleuch, Yves Bienvenu. Impact of aging conditions on mechanical properties of thermoplastic polyurethane. Materials & Design, 2010, 31, pp.4194-4201. ⟨10.1016/j.matdes.2010.04.023⟩. ⟨hal-00510028⟩
  • Olivier Cahuc, Jean-Yves K'Nevez, Alain Gérard, Philippe Darnis, Gaëtan Albert, et al.. Self-excited vibrations in turning: cutting moment analysis. International Journal of Advanced Manufacturing Technology, 2010, 47, pp.217-225. ⟨10.1007/s00170-009-2189-2⟩. ⟨hal-00490842⟩
  • Clara Panait, Walter Bendick, A. Fuchsmann, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Study of the microstructure of the grade 91 steel after more than 100.000h of creep exposure at 600°C. International Journal of Pressure Vessels and Piping, 2010, 87, pp.326-335. ⟨10.1016/j.ijpvp.2010.03.017⟩. ⟨hal-00509625⟩
  • Mohamed Sennour, Loic Marchetti, Frantz Martin, Stéphane Perrin, Régine Molins, et al.. A detailed TEM and SEM study of Ni-base alloys oxide scales formed in primary conditions of pressurized water reactor. Journal of Nuclear Materials, 2010, 402 (2-3), pp.147-156. ⟨10.1016/j.jnucmat.2010.05.010⟩. ⟨hal-00507516⟩
  • André Pineau, Benoit Tanguy. Advances in cleavage fracture modelling in steels : micromechanical, numerical and multiscale aspects. Comptes Rendus. Physique, 2010, 11, pp.316-325. ⟨10.1016/j.crhy.2010.07.013⟩. ⟨hal-00542464⟩
  • Florian Vivier, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Creep rupture of a 9Cr1MoNbV steel at 500 °C : base metal and welded joint. Nuclear Engineering and Design, 2010, 240, pp.2704-2709. ⟨10.1016/j.nucengdes.2010.06.031⟩. ⟨hal-00523418⟩
  • O. Bouaziz, Kangying Zhu, Carla Oberbillig, Mingxin Huang. An approach to define the effective lath size controlling yield strength of bainite. Materials Science and Engineering: A, 2010, 527, pp.6614-6619. ⟨10.1016/j.msea.2010.06.061⟩. ⟨hal-00523140⟩
  • Yann Duplessis Kergomard, Jacques Renard, Alain Thionnet, C. Landry. Intralaminar and interlaminar damage in quasi-unidirectional stratified composite structures : Experimental analysis. Composites Science and Technology, 2010, 70, pp.1504-1512. ⟨10.1016/j.compscitech.2010.05.006⟩. ⟨hal-00509907⟩
  • Olivier Bouaziz, Y. Estrin, Yves Brechet, J.D. Embury. Critical grain size for dislocation storage and consequences for strain hardening of nanocrystalline materials. Scripta Materialia, 2010, 63, pp.477-479. ⟨10.1016/j.scriptamat.2010.05.006⟩. ⟨hal-00509787⟩
  • Bahram Sarbandi, Sophie Cartel, Jacques Besson, David Ryckelynck. Truncated integration for simultaneous simulation of sintering using a separated representation. Archives of Computational Methods in Engineering, 2010, 17, pp.455-463. ⟨10.1007/s11831-010-9055-0⟩. ⟨hal-00542499⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, J. Malaplate, Benjamin Fournier, et al.. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. Materials Science and Engineering: A, 2010, 527, pp.3984-3993. ⟨10.1016/j.msea.2010.03.001⟩. ⟨hal-00491028⟩

Communications dans un congrès

  • Arjun Kalkur Matpadi Raghavendra, Lionel Marcin, Vincent Maurel, Henry Proudhon. Modelling the influence of clustered defects on HCF properties of Nibased superalloys. 13th International Fatigue Congress, Nov 2023, Hiroshima, Japan. ⟨hal-04346313⟩
  • Abhishek Palchoudhary, Vincent Maurel, Cristian Ovalle, Pierre Kerfriden. A fast Neuber-type Finite Element simulator to calibrate a multi-mechanism HCF model of alloys with process-induced pores. Fatigue 2022+1 - 13th International Fatigue Congress, Nov 2023, Hiroshima, Japan. ⟨hal-04420369⟩
  • Mikel Bengoetxea Aristondo, K Ammar, Samuel Forest, Vincent Maurel, Houssem Eddine Chaieb, et al.. Phase-field modelling of zinc dendrite growth in ZnAlMg coatings. GALVATECH 2023 - 13th International Conference on Zinc and Zinc Alloy Coated Steel Sheet, The Corrosion Science Society of Korea, Oct 2023, Seoul, South Korea. ⟨hal-04463390⟩
  • Christian Roth, Thomas Tancogne-Dejean, Xiang Kong, Thilo F. Morgeneyer, Dirk Mohr. In-situ Laminography Experiments on AA2198-T8R: Ductile Fracture Mechanisms from Shear to Biaxial Tension. ANNUAL TECHNICAL MEETING, 2023 SOCIETY OF ENGINEERING SCIENCE, Oct 2023, Minnesota, United States. ⟨hal-04480398⟩
  • Matteo Bastico, David Ryckelynck, Laurent Corté, Yannick Tillier, Etienne Decencière. A Simple and Robust Framework for Cross-Modality Medical Image Segmentation applied to Vision Transformers. International Conference on Computer Vision Workshops (ICCVW) 2023, Oct 2023, Paris, France. pp.4128-4138, ⟨10.1109/ICCVW60793.2023.00446⟩. ⟨hal-04309111⟩
  • Pierre Roumanille, Julien Lesseur, Julien Uzanu, Hoa Le Trong, Emna Ben Romdhane, et al.. Using X-ray imaging for the study of crack development in solder reliability testing. ESRF 2023, Oct 2023, TOULOUSE, France. pp.115079, ⟨10.1016/j.microrel.2023.115079⟩. ⟨hal-04273250⟩
  • Robin Laot, Pierre-Yves Le Gac, Maelenn Le Gall, Morgane Broudin, Cristian Ovalle, et al.. Effet du vieillissement sur le comportement mécanique de Polyéthylène Haute Densité: comparaison unimodale / bimodale. DEPOS31 - 31ème Colloque National Déformation des Polymères Solides, Oct 2023, Anglet, France. ⟨hal-04419870⟩
  • Cristian Ovalle, Morgane Broudin, Lucien Laiarinandrasana. Mimicking the stress conditions of internally pressurized pipes by plain strain grooved tensile (PSGT) specimens during traction and creep loading. DEPOS31 - 31ème Colloque National Déformation des Polymères Solides, Oct 2023, Anglet, France. ⟨hal-04419716⟩
  • Gaultier Lefay, Nicolas Amouroux, Grégory Martin, Cristian Ovalle, Lucien Laiarinandrasana. Rupture ductile d’un tricouche de polymères sous l’impact d’un tir airbag. DEPOS31 - 31ème Colloque National Déformation des Polymères Solides, Oct 2023, Anglet, France. ⟨hal-04419932⟩
  • Thilo F. Morgeneyer. Ductile damage micromechanisms under shear and non-proportional loading: In situ 3D experiments and FE simulations. WORKSHOP ON DUCTILE FRACTURE, ENS Paris Saclay, Sep 2023, Paris, France. ⟨hal-04480447⟩
  • Charbel Moussa, Daniel Irmer, Vladimir A. Esin, Mohamed Sennour. Interaction between S-phase precipitates and dislocation sub-structures in AA2024 (Al-Cu-Mg family). 14th International Conference on the Technology of Plasticity, Sep 2023, mandelieu la napoule, France. ⟨hal-04281741⟩
  • Maryse Gille, Henry Proudhon, Jette Oddershede, Thilo F. Morgeneyer. Understanding crystallographic effects on strain localization in a 6016 aluminium alloy under plane strain tension using correlative X-ray lab tomography. XVII International Conference on Computational Plasticity, Sep 2023, Barcelone, Spain. ⟨hal-04345220⟩
  • Clement Ribart, Aldo Marano, Wolfgang Ludwig, Henry Proudhon. Combining diffraction microstructure imaging and FFT simulations to study polycrystal plasticity. XVII International Conference on Computational Plasticity, Sep 2023, Barcelone, Spain. ⟨hal-04345207⟩
  • Thalita De Paula, Marc Maisonneuve, Catherine Guerre, Cecilie Duhamel, Jérôme Crépin, et al.. Effect of aerated transients on stress corrosion cracking of 316L SS in high temperature water. 21st International conference on the environmental Degradation of Materials in Nuclear Power systems - Water reactors, Aug 2023, Newfoundland, Canada. ⟨hal-04454796⟩
  • Cecilie Duhamel, Thalita De Paula, Marc Maisonneuve, Catherine Guerre, Jérôme Crépin, et al.. TEM characterization of surface and crack oxidation of 316L SS in PWR water after hydrogenated-oxygenated cycles. 21st International conference on the environmental Degradation of Materials in Nuclear Power systems - Water reactors, Aug 2023, Newfoundland, Canada. ⟨hal-04454788⟩
  • Irina Sin, Antoine Collet, Hervé Chauris, Vincent Lagneau, Olivier Regnault, et al.. History matching of large-scale reactive transport problem based on deterministic and stochastic approaches. Goldschmidt 2023, Jul 2023, Lyon, France. ⟨hal-04477577⟩
  • Simon Le Berre, Isabelle Ramière, David Ryckelynck. Error analysis of the Hybrid Hyper-Reduction method for frictionless contact problems. ICCCM 2023 - 7th International conference on computational contact mechanics, ECCOMAS (Thematic conference), Jul 2023, Turin, Italy. ⟨hal-04088245⟩
  • Daniel Irmer, Mohamed Sennour, Lisa T. Belkacemi, Vladimir A. Esin, Charbel Moussa. Investigating the Influence of Cold Rolling on Precipitation in Industrial AA2024 using Advanced Microscopy Techniques. XVIIIème colloque de la Société Française des Microscopies, Jul 2023, Rouen, France. ⟨hal-04354409⟩
  • Clemence Logeais, Cristian Ovalle, Lucien Laiarinandrasana. Aging effects on the bulk modulus of a fluorosilicone: experimental methods. ACEX 16 - 16th International Conference on Advanced Computational Engineering and Experimenting, Jul 2023, Heraklion - Crete, Greece. ⟨hal-04419631⟩
  • Lucien Laiarinandrasana, Olga Klinkova, Cristian Ovalle, Peter Cloetens, Thilo F. Morgeneyer. Deformation and Cavitation at the Spherulite Scale of Semi-Crystalline Polymers. ACEX 16 - 16th International Conference on Advanced Computational Engineering and Experimenting, Jul 2023, Heraklion - Crete, Greece. ⟨hal-04419604⟩
  • Cristian Ovalle, Morgane Broudin, Lucien Laiarinandrasana. Is it possible to mimic the stress conditions of internally pressurized pipes by plane strain grooved tensile (PSGT) specimens?. 16th International Conference on Advanced Computational Engineering and Experimenting, Jul 2023, Heraklion, Crete, Greece. ⟨hal-04419385⟩
  • Lucas Monteiro Fernandes, Philipp Rieder, Matthias Neumann, Henry Proudhon, Volker Schmidt, et al.. Effect of crystallographic twins on the elasto-plastic response of polycrystals. Proceedings of the 14th International Symposium on Continuum Models and Discrete Systems, Paris, France – 26-30 June 2023, Jun 2023, Paris, France. ⟨hal-04385959⟩
  • François Willot. Effective conductivity of a nonlinear differential laminate assemblage. 14th International Symposium on Continuum Models and Discrete Systems, Paris, France, Jun 2023, Paris, France. ⟨hal-04386013⟩
  • Damien Texier, Quentin Sirvin, Ayyoub Dziri, Henry Proudhon, Vladislav Yastrebov, et al.. Effect of oxygen content on the sub-grain nanoindentation response in titanium affected by high temperature oxidation. Ti-2023-World Titanium Conference 2023, Jun 2023, Edinburgh, United Kingdom. ⟨hal-04167316⟩
  • Cristian Ovalle, Nicolas Amouroux, Gregory Martin, Lucien Laiarinandrasana. Ductile failure of a plasticized Polyvinylchloride during air bag deployment. ICF 15 - International Conference on Fracture, Jun 2023, Atlanta, United States. ⟨hal-04419036⟩
  • Lucien Laiarinandrasana, Theophile Hourdou, Sébastien Blassiau, Alain Thionnet, Cristian Ovalle. Thermal and void volume fraction profiles in 3D for a DENT specimen of neat and glass of syntactic polypropylene materials. ICF 15 - International Conference on Fracture, Jun 2023, Atlanta, United States. ⟨hal-04419059⟩
  • Daniel Irmer, Charbel Moussa, L. Belkacemi, Mohamed Sennour, A. Vaissière, et al.. Effet de la pré-déformation sur la germination, la croissance et le mûrissement de la phase S dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène. La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France. ⟨hal-04354382⟩
  • Daniel Irmer, Charbel Moussa, Lisa Thinhinane Belkacemi, Mohamed Senour, Alan Vassière, et al.. Effet de la pré-déformation sur la germination, la croissance et le murissement de la phase s dans un alliage 2024 : de la germination hétérogène à la distribution spatiale homogène. La Métallurgie : Quel avenir!, Jun 2023, Grenoble, France. ⟨hal-04281756⟩
  • Camille Gandiolle, Pierre Arnaud, Youssef Younes. Conception d'un test de fretting in-situ pour la tomographie à rayons X. 39ème Journées de Printemps, SF2M, May 2023, Paris, France. ⟨hal-04140882⟩
  • Abhishek Palchoudhary, Cristian Ovalle, Vincent Maurel, Pierre Kerfriden. A multi-mechanism model for fast characterization of high cycle fatigue of alloys in the presence of process-induced pores. SF2M - 39èmes journées de printemps, May 2023, Paris, France. ⟨hal-04424720⟩
  • J. Lopez-Cuesta, Herve Nlandu-Mayamba, A. Taguet, Perrin Didier, Florence Delor-Jestin, et al.. How surface treatment and/or reactive agents allow closed loop recycling of PLA/Flax and PLA/Bamboo reinforced composites to be performed ?. PPS 38 - The 38th International Conference of the Polymer Processing Society, May 2023, St Gallen, Switzerland. ⟨hal-04172466⟩
  • Anne Mangeney, Pauline Bonnet, Vladislav Yastrebov, Olivier Castelnau, Alban Leroyer, et al.. Modelling the source of glacial earthquakes: numerical modelling of the response of a tide-water glacier to the capsize of an instable iceberg. EGU General Assembly 2023, Apr 2023, Vienne, Austria. ⟨10.5194/egusphere-egu23-14118⟩. ⟨hal-04506085⟩
  • H. Nlandu-Mayamba, A. Taguet, Perrin Didier, H. Askanian, Florence Delor-Jestin, et al.. Modifications de l’interface pour des composites recyclés fibres naturelles/PLA. Techday : Recyclage des matériaux biosourcés, Nov 2022, Ladoux, France. ⟨hal-03938102⟩
  • Daniel Irmer, Charbel Moussa, Mohamed Sennour, Vladimir A. Esin. Effet de la pré-déformation par laminage à froid sur la précipitation de la phase S-Al2CuMg dans un alliage d'aluminium 2024-T3. Matériaux 2022, Oct 2022, Lille, France. ⟨hal-04281768⟩
  • Lili Wan, C Ovalle, Lucien Laiarinandrasana. Modeling the mechanical response of reinforced rubber in taking into account heat build-up and hydrostatic stress. European Conference on Constitutive Models for Rubbers, Sep 2022, Milan, Italy. pp.53-58, ⟨10.1201/9781003310266⟩. ⟨hal-03991990⟩
  • Clemence Logeais, C Ovalle, Lucien Laiarinandrasana. Influence of the compressibility on the mechanical response of a fluorosilicone material. European Conference on Constitutive Models for Rubbers, Sep 2022, Milan, Italy. pp.205-210, ⟨10.1201/9781003310266⟩. ⟨hal-03991960⟩
  • C Ovalle, Lucien Laiarinandrasana, Rouslan Borisov, Guillaume Miquelard-Garnier, Bruno Fayolle. Laminated rubber bearings subjected to combined shear and compressive loading: Heterogeneous ageing and crack growth in mode II. European Conference on Constitutive Models for Rubbers, Sep 2022, Milan, Italy. pp.46-52, ⟨10.1201/9781003310266⟩. ⟨hal-03991979⟩
  • Maryse Gille, Henry Proudhon, Jette Oddershede, Thilo F. Morgeneyer. Projection-DIC Analysis of Projected 3D data for a 6xxx Aluminium Alloy Under Plane Strain Tension Imaged by in situ Absorption Contrast Tomography. BSSM International Conference on Advances in Mechanics, Sep 2022, Oxford, France. ⟨hal-03890762⟩
  • Mathias Hurst, Lukas Helfen, Thilo F. Morgeneyer, Heikki Suhonen, Jussi-Petteri Suuronen, et al.. Guided hierarchical in situ X-ray nano-laminography enabling the investigation of damage nucleation in alloy sheets. German Conference for Research with Synchrotron Radiation, Neutrons and Ion Beams at Large Facilities (SNI), Sep 2022, Berlin, Germany. ⟨hal-03890281⟩
  • Daniel Irmer, Vladimir A. Esin, Charbel Moussa, Mohamed Sennour. Cold rolling and growth-coarsening of S-phase in AA2024: effect on microstructure and hardness. ICAA 2022 - 18th International Conference on Aluminum Alloys, Sep 2022, Toyama, Japan. ⟨hal-04281763⟩
  • X Kong, Gilles Rousselier, Djamel Missoum-Benziane, Jacques Besson, Lukas Helfen, et al.. Ductile damage study for shear and tension load path changes: experiments and simulations. 25ème Congrès Français de Mécanique, Aug 2022, Nantes, France. ⟨hal-03890743⟩
  • Arjun Kalkur Matpadi Raghavendra, Laurent Lacourt, Lionel Marcin, Henry Proudhon, Vincent Maurel. Role of defects on high cycle fatigue properties of a cast nickel-based superalloy. 25ème Congrès Français de Mécanique, Aug 2022, Nantes, France. ⟨hal-04345192⟩
  • Abhishek Palchoudhary, Vincent Maurel, Cristian Ovalle, Pierre Kerfriden. A fast Neuber-type finite element simulator to enable deep-learning-based fatigue life predictions from thermographic data. Congrès Français de Mécanique, l'Association Française de Mécanique, Aug 2022, Nantes, France. ⟨hal-04373346⟩
  • Mathias Hurst, Lukas Helfen, Thilo F. Morgeneyer, Heikki Suhonen, Jussi-Petteri Suuronen, et al.. Hierarchical region-of-interest tracking for in situ nano-scale X-ray laminography. 5th International Conference on Tomography of Materials & Structures (ICTMS), Jul 2022, Grenoble, France. ⟨hal-03890227⟩
  • Lili Wan, Cristian Ovalle, Lucien Laiarinandrasana. The heat build-up and the stress heterogeneity effects on glass-fiber reinforced PA11 under monotonic loading. 15th International Conference on Advanced Computational Engineering and Experimenting (ACEX), Jul 2022, Florence, Italy. ⟨hal-03994864⟩
  • Cristian Ovalle, Morgane Broudin, Lucien Laiarinandrasana. About the displacement fields evolution in plain strain grooved tensile (PSGT) specimens from HDPE pipes: traction and creep loading. 15th International Conference on Advanced Computational Engineering and Experimenting (ACEX), Jul 2022, Florence, Italy. ⟨hal-03992380⟩
  • Sébastien Joannès, Jennifer Blondel, Eveline Hervé-Luanco. Accounting for local morphological fluctuations in the prediction of the transverse elastic behaviour of UD composites. ECCM 20 - 20th European Conference on Composite Materials, Jun 2022, Lausanne, Switzerland. ⟨hal-03747790⟩
  • Mathias Hurst, Thilo F. Morgeneyer, Lukas Helfen, H Suhonen, Ante Buljac, et al.. Guided hierarchical X-ray nano-laminography enabling high-resolution in situ investigation of damage nucleation in alloy sheets. 15th International Conference on X-ray Microscopy (XRM), Jun 2022, Taiwan, Taiwan. ⟨hal-03890204⟩
  • Mohamed Abatour, Samuel Forest, Kais Ammar, Cristian Ovalle, Nikolay Osipov, et al.. Méthode systématique de régularisation des lois thermo-élastoviscoplastiques en grandes déformations. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03717640⟩
  • Pierre Kerfriden, Iuri Rocha, James Rouse. La méthode des éléments finis bayésienne. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03719275⟩
  • Simon Le Berre, Isabelle Ramière, Jules Fauque, David Ryckelynck. Hyper-réduction d'ordre de modèle pour la mécanique du contact traité par multiplicateurs de Lagrange. 15e colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03718086⟩
  • Paul Beguin, Samuel Forest, C. Ovalle Ovalle Rodas, Julien Vignollet, Vladislav Yastrebov. Résistance thermique et électrique des interfaces de contact entre des surfaces rugueuses. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03717697⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Modèle de coalescence multi-fidélité par cokrigeage entre simulations sur microstructures aléatoires et cellules unitaires. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03718338⟩
  • Vladislav A. Yastrebov, Basava Raju Akula, Julien Vignollet. Méthode MorteX pour des problèmes du couplage des maillages, du contact et de l'usure. 15e colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, Hyères-les-Palmiers, France. ⟨hal-03717639⟩
  • Nicolas Pistenon, Hilal Sami, Sofiane Hendili, Djamel Missoum Benziane, Pierre Kerfriden. Une méthode mixte IA/"Inherent Strain" pour prédire les déformations en fabrication additive. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03717730⟩
  • Mouad Fergoug, Nicolas Feld, Samuel Forest, Basile Marchand, Augustin Parret-Fréaud. Méthode générale pour la correction des couches limites en homogénéisation asymptotique. 15ème colloque national en calcul des structures, Université Polytechnique Hauts-de-France [UPHF], May 2022, 83400 Hyères-les-Palmiers, France. ⟨hal-03717638⟩
  • Cecilie Duhamel, M. Maisonneuve, T. de Paula, Qi Huang, Jérôme Crépin, et al.. Oxydation et corrosion sous contrainte d’aciers inoxydables écrouis en milieu primaire des réacteurs nucléaires. Journée Scientifique FERMI « Tenue des matériaux à l’environnement », May 2022, Thiais, France. ⟨hal-03886986⟩
  • Geoffrey Celeste, Vincent Guipont, Djamel Missoum-Benziane, Guillaume Kermouche, Sergio Sao-Joao, et al.. Assessment of agglomerated ceramic powders under impact by cold spraying. International Thermal Spray Conference (ITSC), May 2022, Vienne, Austria. ⟨hal-03667863⟩
  • X Kong, Gilles Rousselier, D. Missoum-Benziane, Jacques Besson, Lukas Helfen, et al.. Ductile damage study for shear and tension load path changes: experiments and simulations. EMMC18 – 18th European Mechanics of Materials Conference, Apr 2022, Oxford, United Kingdom. ⟨hal-03890480⟩
  • X Kong, Ante Buljac, François Hild, Lukas Helfen, Mathias Hurst, et al.. Shear loading dominated damage mechanisms and strain localization studied by multiscale in situ 3D laminography imaging, EBSD and Digital Volume Correlation for AA2198-T8. EMMC18 – 18th European Mechanics of Materials Conference, Apr 2022, Oxford, United Kingdom. ⟨hal-03890458⟩
  • C Ovalle, Morgane Broudin, Lucien Laiarinandrasana. Displacement fields evolution in plain strain grooved tensile (PSGT) specimens during traction and creep loading. 18th European Mechanics of Materials Conference (EMMC18), Apr 2022, Oxford, United Kingdom. ⟨hal-03992118⟩
  • Clement Ribart, Aldo Marano, Andrew King, Wolfgang Ludwig, Henry Proudhon. X-ray 4D multimodal testing & simulations to study crystal plasticity. 18th European Mechanics of Materials Conference, Apr 2022, Oxford, United Kingdom. ⟨hal-04345608⟩
  • Daniel Hänschke, Lukas Helfen, Elias Hamann, Markus Zuber, Simon Bode, et al.. Status and Prospects of 3D Laminographic Imaging at KIT. 4th International Conference on Synchrotron Radiation Instrumentation (SRI), Mar 2022, Hamburg (online), Germany. ⟨hal-03649020⟩
  • Claire Gong, Joseph Marae Djouda, Abdelhamid Hmima, Fabrice Gaslain, Thomas Maurer, et al.. Influence of mechanical attrition treatment on 17-4PH stainless steel: comparison at sub-micron scale between sent specimens produced by atomic diffusion additive manufacturing (ADAM) process. ICRS 11 - The 11th International Conference of Residual Stresses, SF2M; IJL, Mar 2022, Nancy, France. ⟨hal-04018650⟩
  • Mathias Hurst, Lukas Helfen, Thilo F. Morgeneyer, Heikki Suhonen, Jussi-Petteri Suuronen, et al.. Hierarchical X-ray laminography for the observation of in situ processes in large, application relevant samples. 14th International Conference on Synchrotron Instrumentation (SRI), Mar 2022, Hamburg, Germany. ⟨hal-03890268⟩
  • Thilo F. Morgeneyer, Xiang Kong, G.T. Baumbach, Ante F Buljac, Lukas Helfen, et al.. Multiscale observation of ductile damage on an Aluminium alloy 2198 under shear. LightMAT 2021, Nov 2021, Virtual, United Kingdom. ⟨hal-03524467⟩
  • Deyo Maeztu Redin, Julien Caroux, Pierre-Yves Rohan, Hélène Pillet, Alexia Cermolacce, et al.. A wear model to predict the damage of ACL implants. 46ème Congrès Société Biomécanique, Oct 2021, Saint-Etienne, France. pp.115, ⟨10.1080/10255842.2021.1978758⟩. ⟨hal-03517412⟩
  • Yazid Madi, Chiraz Belhadj, Adrien van Gorp, Laure Dodelin, Magali Polo, et al.. Caractérisation de la température de transition et de la ténacité sur prélèvements quasi non destructifs. Symposium scientifique et technique Esope, FCTM-ESOPE, Oct 2021, Paris, France. ⟨hal-03691096⟩
  • Cristian Ovalle, Julie Brun, Lukas Helfen, M Hurst, X Kong, et al.. Effects of local mesostructure on the damage mechanisms in a fibre-reinforced polyamide composite studied by in situ laminography and digital volume correlation. 1st Virtual ESIS TC4 Conference on Fracture of Polymers, Composites and Adhesives, Sep 2021, Les Diablerets (online), Switzerland. ⟨hal-03509483⟩
  • Lili Wan, Lucien Laiarinandrasana, C Ovalle. The heat build-up and stress heterogeneity effects on PE. 30ème Colloque national sur la DEformation des Polymères Solides - DEPOS30, Sep 2021, La Napoule, Alpes-Maritimes, France. ⟨hal-03510860⟩
  • C Ovalle, Guillaume Boisot, Lucien Laiarinandrasana. About the stress triaxiality ratio effects on the heat build-up of PolyAmide 11 under monotonic loading. 30ème Colloque national sur la DEformation des Polymères Solides - DEPOS30, Sep 2021, La Napoule, Alpes-Maritimes, France. ⟨hal-03509404⟩
  • M. Fergoug, N. Feld, Samuel Forest, Basile Marchand, A. Parret-Fréaud. Model Error Estimation Based on Asymptotic Homogenization for Periodic Heterogeneous Structures. VIII Conference on Mechanical Response of Composites, Sep 2021, Gothenburg, Sweden. ⟨10.23967/composites.2021.069⟩. ⟨hal-03454429⟩
  • Francesco Delloro, Hugo Durand, Laurent Lacourt, Jean-Christophe Teissedre, Alain Thorel, et al.. Characterization of mechanical behaviour of aluminum powders under fast dynamic conditions. DYMAT 2021 - 13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading, Sep 2021, Madrid (ES), Spain. pp.01036, ⟨10.1051/epjconf/202125001036⟩. ⟨hal-03940867⟩
  • Hafsa Jaber, G. Benabdelkhalek, A. Kalinenko, L. Kumar, T. Lebedkina, et al.. Effect of the surface mechanical attrition treatment on multiscale complexity of the Portevin-Le Chatelier effect in an AlMg alloy. EUROMAT 2021 – European Congress and Exhibition on advanced materials and processes, Sep 2021, Graz, Austria. ⟨hal-03594787⟩
  • Vladimir A. Esin, Laurane Finet, Vincent Maurel, Loic Nazé. Composition and Temperature Stability of η and δ Phases for Future Nickel-Base Superalloys for Turbine Disks Application. Superalloys 2021, Sep 2021, Seven Springs, France. pp.112-121, ⟨10.1007/978-3-030-51834-9_11⟩. ⟨hal-03084104⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Comparison of strategies to account for X-ray-tomography-identified pores in the simulation of ductile fracture. XVI International Conference on Computational Plasticity, Sep 2021, Barcelona, Spain. ⟨hal-03510947⟩
  • Claire Gong, Joseph Marae Djouda, Abdelhamid Hmima, Fabrice Gaslain, Mahdi Chemkhi, et al.. 2D characterization at submicron scale of crack propagation of 17-4PH parts produced by Atomic Diffusion Additive Manufacturing (ADAM) process. Second European Conference on the Structural Integrity of Additively Manufactured Materials, Sep 2021, Virtuel, Norway. pp.13 - 19, ⟨10.1016/j.prostr.2021.12.003⟩. ⟨hal-03864734⟩
  • Nesrine Klebi, Pierre Kerfriden, Basile Marchand, Alain Thionnet. Digital Twinning to predict the residual life of composite pressure vessels. COMPLAS 2021 - 16th International Conference on Computational Plasticity: Fundamentals and Applications, Sep 2021, Barcelona, Spain. ⟨hal-03797613⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Effective ductility model based on random microstructure simulations. 25th International Congress of Theoretical and Applied Mechanics, Aug 2021, Milano (virtual), Italy. ⟨hal-03510920⟩
  • Lili Wan, Cristian Ovalle, Lucien Laiarinandrasana. The heat build-up and stress heterogeneity effects on PE. ACEX2021 - 14th International Conference on Advanced Computational Engineering and Experimenting, Jul 2021, Malta, Malta. ⟨hal-03510841⟩
  • Nathan Odou, Cristian Ovalle, Lucien Laiarinandrasana. Mechanical response and failure of an Ultra High Molecular Weight PolyEthylene at cryogenic temperature. ACEX2021 - 14th International Conference on Advanced Computational Engineering and Experimenting, Jul 2021, Malta, Malta. ⟨hal-03510120⟩
  • Cristian Ovalle, Lucien Laiarinandrasana. Adiabatic heating of PolyAmide 11 under monotonic loading : effects of the initial stress triaxiality ratio. ACEX2021 - 14th International Conference on Advanced Computational Engineering and Experimenting, Jul 2021, Malta, Malta. ⟨hal-03509358⟩
  • Sébastien Joannès. The Fascinating World of Technical Fibres. 9th International Conference on Applied Hair Science, TRI's Hair Conference 2021, Jun 2021, on-line, United States. ⟨hal-03622016⟩
  • Mouad Fergoug, Nicolas Feld, Samuel Forest, Basile Marchand, Augustin Parret-Fréaud. Model error estimation based on asymptotic homogenization for periodic heterogeneous structures. 10th International Conference on Adaptative Modeling and Simulation (ADMOS), Jun 2021, Gothenburg (on line), Sweden. ⟨hal-03454405⟩
  • Francesco Delloro, A. Chebbi, H. Perrin, G. Ezo’o, A. Bastien, et al.. Cold Spray of Metallic Coatings on Polymer Based Composites for the Lightning Strike Protection of Airplane Structures. ITSC2021, May 2021, Virtual, France. pp.87-95, ⟨10.31399/asm.cp.itsc2021p0087⟩. ⟨hal-03522008⟩
  • G. Garcin, Francesco Delloro, M. Jeandin, J-F. Hochepied, C. Grente, et al.. Development of Metal-Ceramic-Lubricant Composite Coatings Obtained by Cold Spray for Tribological Applications in the Automotive Industry. ITSC2021, May 2021, Virtual, France. pp.561-568, ⟨10.31399/asm.cp.itsc2021p0561⟩. ⟨hal-03522023⟩
  • H. Durand, L. Lacourt, J.-C. Teissedre, F. Delloro, A. Thorel, et al.. Combined Laser Shock and Micro-Compression Approach to the Mechanical Behavior of Powders for Cold Spray. ITSC2021, May 2021, Virtual, France. pp.627-634, ⟨10.31399/asm.cp.itsc2021p0627⟩. ⟨hal-03508384⟩
  • Geoffrey Celeste, Vincent Guipont, Djamel Missoum-Benziane. Investigation of agglomerated ceramic powders suitable for cold spray. International Thermal Spray Conference (ITSC), May 2021, Virtual, France. ⟨hal-03199051⟩
  • Geoffrey Celeste, Vincent Guipont, Djamel Missoum-Benziane. Investigation of Agglomerated and Porous Ceramic Powders Suitable for Cold Spray. ITSC2021, May 2021, Virtual, France. pp.139-146, ⟨10.31399/asm.cp.itsc2021p0139⟩. ⟨hal-03265700⟩
  • Anne-Françoise Gourgues-Lorenzon, David Haboussa, Gilles Rolland, Laury-Hann Brassart, Jacques Besson, et al.. Metallurgical Approach for the Development of Heat Treatment Applied to 316L Stainless Steel Cold Spray Coatings. ITSC2021, May 2021, Virtual, France. pp.177-188, ⟨10.31399/asm.cp.itsc2021p0177⟩. ⟨hal-03499958⟩
  • Pauline Bonnet, Vladislav Yastrebov, Anne Mangeney, Olivier Castelnau, Alban Leroyer, et al.. Modelling the source of glacial earthquakes. EGU General Assembly 2021, Apr 2021, on-line, Austria. ⟨10.5194/egusphere-egu21-8915⟩. ⟨hal-03380228⟩
  • Laury-Hann Brassart, Samy Blusseau, François Willot, F. Delloro, Gilles Rolland, et al.. Quantitative Characterization of Ductility for Fractographic Analysis. ECMI: European Consortium for Mathematics in Industry 2021, ECMI, Apr 2021, Wupperthal, Germany. pp.349-355, ⟨10.1007/978-3-031-11818-0_46⟩. ⟨hal-03886886⟩
  • Christian Beauger, Pascaline Pre, Alain Thorel, Anthony Chesnaud, Charly Lemoine, et al.. Hytrend, un projet power to X de l’Institut Carnot M.I.N.E.S.. Énergie renouvelable et ressources, les enjeux de demain : de l’ingénierie aux territoires, Institut Mines-télécom, Apr 2021, En ligne, France. ⟨hal-03528316⟩
  • Clotilde Richard, Sébastien Joannès, Alba Marcellan. Towards an understanding of the mechanical response of aramid fibers at the filament scale. APS March Meeting 2021, Mar 2021, Virtual - Time Zone: Central Daylight Time, United States. ⟨hal-03296383⟩
  • Mouad Fergoug, Augustin Parret-Fréaud, Basile Marchand, Nicolas Feld, Samuel Forest. MODEL ADAPTIVITY DRIVEN BY MODEL ERROR, APPLICATION FOR 3D WOVEN COMPOSITES. WCCM-ECCOMAS 2020, Jan 2021, Paris, France. ⟨hal-03455663⟩
  • Thilo F. Morgeneyer, Xiang Kong, Lukas Helfen, Djamel Missoum-Benziane, Jacques Besson, et al.. Ductile damage study for shear and tension load path changes assessed by experiments and FE simulations. WCCM-ECCOMAS CONGRESS, Jan 2021, Paris, France. ⟨hal-03108992⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Ductile fracture through numerical homogenization of materials with a random population of defects. 14th WCCM-ECCOMAS Congress 2020, Jan 2021, Paris (e-congress), France. ⟨hal-03482045⟩
  • Cristian Ovalle. Heterogeneous ageing on laminated rubber bearings under combined compression and cyclic shear loadings: Experiments and simulations. LES ELASTOMERES EN CONDITIONS EXTREMES, Nov 2020, Orleans, France. ⟨hal-03169218⟩
  • Thilo F. Morgeneyer, Lukas Helfen, Mathias Hurst, Andrei Shkarin, Xiang Kong, et al.. In situ observation of damage evolution in alloy sheet materials via synchrotron micro- and nanolaminography. In situ observation of damage evolution in alloy sheet materials via synchrotron micro- and nanolaminography, Oct 2020, Grenoble, France. ⟨hal-03103481⟩
  • Thilo F. Morgeneyer, Xiang Kong, Lukas Helfen, François Hild, Ante F Buljac. Strain and damage interactions under plane strain conditions: 3D in situ measurements for different microstructures. 17th International Conference on Aluminum Alloys ICAA17, Oct 2020, Grenoble, France. ⟨hal-03103368⟩
  • Thilo F. Morgeneyer, Xiang Kong, Lukas Helfen, G.T. Baumbach, Jacques Besson, et al.. Ductile damage study for load path changes under low stress triaxiality via 3D synchrotron imaging and FE simulations. 17th International Conference on Aluminum Alloys ICAA17, Oct 2020, Grenoble, France. ⟨hal-03103420⟩
  • Faisal Islam, Sébastien Joannès, Lucien Laiarinandrasana. Propagation of uncertainty from constituents to structural assessments in composite strength modelling. ICCS 23 - 23th International Conference on Composites Structures, Sep 2020, Porto, Portugal. ⟨hal-03110194⟩
  • A. Milani, C. Philippot, Vladimir A. Esin, F. Azzouz, E. Lucas, et al.. Effect of matrix microstructure and second-phase particles on the damage behaviour of hot stamped martensitic steels for automotive applications. Virtual European Conference on Fracture 2020, Jun 2020, Virtual conference, France. ⟨hal-04088260⟩
  • C Ovalle, Guillaume Boisot, Lucien Laiarinandrasana. Heat build-up of semi-crystalline polymers under monotonic loading : effects of stress triaxiality ratio. International Conference on Plasticity, Damage & Fracture 2020, Jan 2020, Rivera Maya, Mexico. ⟨hal-03167574⟩
  • Martinus P Widjaja, Faisal Islam, Sébastien Joannès, Anthony Bunsell, G. Mair, et al.. Effect of input properties on the predicted failure of a composite pressure vessel using a multiscale model. FiBreMoD Conference, KU Leuven, Dec 2019, Leuven, Belgium. ⟨hal-02439665⟩
  • Mathieu Salaun, Isabelle Gautier-Luneau, Michel Bardet, Vincent Maurel, Atul D. Sontakke, et al.. New generation of aluminum borate phosphors for white LEDs lighting prepared by the polymeric precursor method (modified Pechini). Congrès RX et matière, Nov 2019, Nancy, France. ⟨hal-02499433⟩
  • Martinus P. Widjaja, Marco Alves, Mark Mavrogordato, Sébastien Joannès, Anthony R. Bunsell, et al.. Effect of the Time Dependent Loading of Type IV Cylinders using a Multiscale Model. ICSH 2019 - 8th International Conference on Hydrogen Safety, Sep 2019, Adelaide, Australia. ⟨hal-02315016⟩
  • Fivel Marc, Loic Nazé, Jean-Loup Strudel. Creep Mechanisms in Advanced Superalloys. International Conference on Advanced Materials and Processes for Defence Applications, Sep 2019, Hyderabad, India. ⟨hal-02427025⟩
  • J. Braun, C. Fellah, E. Buet, C. Sauder, C. Lorrette, et al.. OPTIMIZATION OF THE SIC/SIC COMPOSITES FIBER/MATRIX INTERFACES FOR NUCLEAR APPLICATIONS. HT-CMC 10th, Sep 2019, Bordeaux, France. ⟨cea-02394044⟩
  • Stéphane Gillet, Patrick Aimedieu, Isabelle Jeanneau, Frederic Canevet, Nacera Bedrici, et al.. Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic. FDM2019, International Conference On Fracture and Damage Mechanics, Sep 2019, Rhodes, Greece. ⟨hal-02501104⟩
  • Aurélien Fouque, Georges Cailletaud, Vladimir A. Esin, Romaric Landfried, Philippe Testé, et al.. Observation of metallurgical changes induced by an electric arc to Ag-SnO2-CuO electrodes. 65th IEEE Holm Conference on Electrical Contacts, Sep 2019, Milwaukee, United States. pp.239-244, ⟨10.1109/HOLM.2019.8923681⟩. ⟨hal-02155532⟩
  • Rebecca J Lunn, Yann Leray, Sébastien Joannès, Faisal Islam, Steve Bucknell, et al.. Further Insights into the Fatigue of Hair Fibres through Statistical Analysis and Relevance to Hair Care Applications. HairS'19 DWI, Sep 2019, Schluchsee, Germany. ⟨hal-02323094⟩
  • Liliana Moniz da Silva Sancho, Marie-Hélène Berger, Jean-Dominique Bartout, Christophe Colin, Qiang Chen, et al.. Alumina-Zirconia eutectics processed using selective laser melting and ultra-high solidification rates. DSEC VI, Directional Solidified Eutectic Ceramic workshop, Sep 2019, Salerne, Italy. ⟨hal-04293899⟩
  • Pauline Bonnet, V A Yastrebov, A. Mangeney, Olivier Castelnau, P. Queutey, et al.. Estimation des volumes d'icebergs qui se retournent: modélisation mécanique et analyse de signaux sismiques. 24ème Congrès Français de Mécanique, CFM 2019, Aug 2019, Brest, France. ⟨hal-02571877⟩
  • Samuel Forest. Plasticité cristalline à gradient : contributions de C. Teodosiu et leur influence sur les développements récents. Congrès Français de Mécanique, Aug 2019, Brest, France. ⟨hal-02275560⟩
  • Jean-Baptiste Charpentier, Jean-Luc Bouvard, Corentin Perderiset, Frédéric Georgi, Daniel Pino Muñoz, et al.. Caractérisation mécanique d'une interface titane/epoxy. Congrès Français de Mécanique 2019, Aug 2019, Brest, France. ⟨hal-02417171⟩
  • V De Rancourt, B. Appolaire, K Ammar, S. Forest. Homogénéisation des lois de comportement élastoviscoplastique pour le calcul en champs de phase. Congrès Français de Mécanique, Aug 2019, Brest, France. pp.35 - 48. ⟨hal-02275562⟩
  • Gilles Rousselier. Modeling of plasticity and ductile fracture physical mechanisms and numerical simulation of laboratory specimens. 24ème Congrès Français de Mécanique, Aug 2019, Brest, France. ⟨hal-02401455⟩
  • M Amestoy, S. Forest. Retour sur la formulation phénoménologique des lois de comportement viscoélastique. Congrès Français de Mécanique, Aug 2019, Brest, France. ⟨hal-02275561⟩
  • Qi Huang, Y. Charles, Cecilie Duhamel, Monique Gaspérini, Jérôme Crépin. Influence of the Combination of Microstructure and Mechanical Fields on Stress Corrosion Cracking Initiation of Cold-Worked Austenitic Stainless Steels. 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems-Water Reactor, Aug 2019, Boston, United States. pp.967-978. ⟨hal-03198941⟩
  • Marc Maisonneuve, Cecilie Duhamel, Catherine Guerre, Jérôme Crépin, Ian De Curières. Effect of aerated transients on oxidation and SCC of stainless steels in PWR primary water. 19th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Aug 2019, Boston, United States. pp.986-1000. ⟨hal-03980504⟩
  • Ashok Rajpurohit, Sébastien Joannès, Faisal Islam, Vicky Singery, Steve Bucknell, et al.. Characterization and statistical analysis of single fiber strength of fibers at various processing stages. ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia. ⟨hal-02308834⟩
  • Faisal Islam, Sébastien Joannès, Anthony Bunsell, Lucien Laiarinandrasana. Adaptation of Weibull analysis to represent strength behaviour of brittle fibres. ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia. ⟨hal-02284784⟩
  • Jan Rojek, Sébastien Joannès, Jean-Christophe Teissedre, Lucien Laiarinandrasana, Anthony Bunsell. Effect of through-thickness compressive stress and porosity on the tensile strength of carbon-fibre reinforced composites. ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia. ⟨hal-02282421⟩
  • Marc Bernacki, Nathalie Bozzolo, Charbel Moussa, Daniel Pino Muñoz, Pascal de Micheli, et al.. Towards the full field modeling of microstructure evolutions during metal forming industrial processes. 7th International Conference on Recrystallization and Grain Growth - ReX & GG 2019, Aug 2019, Ghent, Belgium. ⟨hal-02114513⟩
  • C Ovalle, Peter Cloetens, Thilo F. Morgeneyer, Henry Proudhon, Lucien Laiarinandrasana. Nanovoid morphology and distribution in deformed High Density PolyEthylene observed at the nanometric scale. ACEX2019 - 13th International Conference on Advanced Computational Engineering and Experimenting, Jul 2019, Athènes, Greece. ⟨hal-02511032⟩
  • Jennifer Blondel, Sébastien Joannès, Eveline Hervé-Luanco. Étude de l'influence des fluctuations morphologiques microscopiques sur le comportement élastique transverse de composites unidirectionnels. JNC 21 - 21èmes Journées Nationales sur les Composites, École Nationale Supérieure d'Arts et Métiers (ENSAM) - Bordeaux, Jul 2019, Bordeaux, Talence, France. ⟨hal-02420775⟩
  • Rami Bouaziz, C Ovalle, Lucien Laiarinandrasana. A constitutive model for rubber bearings submitted to combined compression and cyclic shear loadings: impact of thermal aging. ACEX2019 - 13th International Conference on Advanced Computational Engineering and Experimenting, Jul 2019, Athènes, Greece. ⟨hal-02511041⟩
  • R. Bouaziz, C Ovalle, L. Laiarinandrasana. A constitutive model for rubber bearings subjected to combined compression and shear. European Conference on Constitutive Models for Rubbers, Jun 2019, Nantes, France. pp.255-260, ⟨10.1201/9780429324710-45⟩. ⟨hal-02506328⟩
  • Jonathan Champagne, C Ovalle, S Cantournet, F. Lequeux, H. Montes, et al.. Hydrostatic pressure effect on the non-linear mechanics of filled rubbers: experiments and physico-mechanical approach. European Conference on Constitutive Models for Rubbers, Jun 2019, Nantes, France. pp.194, ⟨10.1201/9780429324710-35⟩. ⟨hal-02174558⟩
  • C. Ovalle Ovalle Rodas, Q. Guo, F. Zaïri, X. Guo, P. Charrier. Modelling of the heat build-up temperature and damage fields in bulk filled-rubber samples during fatigue. European Conference on Constitutive Models for Rubbers, Jun 2019, Nantes, France. pp.379-384, ⟨10.1201/9780429324710-66⟩. ⟨hal-02507319⟩
  • Pierre-Olivier Bouchard, Victor-Manuel Trejo-Navas, Marc Bernacki, Ante Buljac, Thilo F. Morgeneyer, et al.. 3D analysis of void coalescence mechanisms in nodular cast iron based on finite element computation driven by digital volume correlation and laminography in-situ observations. Sixth International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC 2019), Jun 2019, Braunschweig, Germany. ⟨hal-02114052⟩
  • Mathieu Salaun, Pierre Gaffuri, Isabelle Gautier-Luneau, M. Bardet, Vincent Maurel, et al.. New generation of aluminum borate phosphors for white LEDs lighting prepared by the polymeric precursor method (modified Pechini). 8th International Symposium on Optical Materials, Jun 2019, Wraslaw, Poland. ⟨hal-02499424⟩
  • Di Li, Vandad-Julien Rohani, Frédéric Fabry, Mohamed Sennour, Laurent Fulcheri. Experimental study on plasma-catalytic synthesis of hydrocarbons from syngas. 24th International Symposium on Plasma Chemistry, Jun 2019, Naples, Italy. ⟨hal-02470318⟩
  • Di Li, Vandad-Julien Rohani, Frédéric Fabry, Mohamed Sennour, Laurent Fulcheri. High yield direct synthesis of liquid organics from CO2 and CH4 in a plasma-catalysis packed bed reactor. 24th International Symposium on Plasma Chemistry, Jun 2019, Naples, Italy. ⟨hal-02458205⟩
  • K D Ahose, S. Lejeunes, D. Eyheramendy, R Bouaziz. Modeling and numerical simulation of thermal ageing in a filled rubber. European Conference on Constitutive Models for Rubbers (ECCMR 2019), Jun 2019, Nantes, France. ⟨hal-02354054⟩
  • A Zouari, M Bono, D Le Boulch, T Le Jolu, Jacques Besson, et al.. Expansion Due To Compression Tests With Rapid Heating Rate For RIA Situations. Society for Experimantal Mechanics (SEM ), Jun 2019, Reno, United States. ⟨hal-03266581⟩
  • Augustin Parret-Fréaud, Oana Ciobanu, Christophe Bovet, Amar El Ouazani Tuhami, Basile Marchand. Parallel mesh adaptivity driven by heterogeneous a posteriori error estimation within the context of large scale industrial problems. International Conference on Adaptive Modeling and Simulation, May 2019, El Campello, Spain. ⟨hal-02122231⟩
  • Alexandre Cottin, Vincent Guipont, Clémence Demangel, Bruno Cauwe. Laser Shock Adhesion Test (LASAT) Applied to Bioceramic Coatings Involving Two-Dimensional Shock Wave Propagation. ITSC 2019, ASM, May 2019, Osaka, Japan. pp.101-108. ⟨hal-02187255⟩
  • Huang Q., Y Charles, Duhamel C., Gaspérini M., Crepin J.. Contribution des champs mécaniques à l'échelle du polycristal à l'amorçage de fissures de corrosion sous contrainte. Journées Jeunes Chercheurs 2019 CEFRACOR, May 2019, poitiers, France. ⟨hal-02194412⟩
  • Anthony Chesnaud, Hélène Garay. Propriétés psychosensorielles dans le domaine des Matériaux du transport. Journée Industrielle IMT « Matériaux haute performance et écomatériaux dans les transports », May 2019, Paris, France. ⟨hal-02499565⟩
  • Laurent Lacourt, Samuel Forest, David Ryckelynck, François Willot, Sylvain Flouriot, et al.. Étude numérique de la nocivité des défauts dans les soudures. 14e Colloque National en Calcul des Structures, CSMA, May 2019, Presqu’île de Giens, France. ⟨hal-02412756⟩
  • A. G. Shvarts, J. Vignollet, V A Yastrebov. Strongly coupled finite element framework for a thin fluid flow in contact interfaces. 14ème Colloque National en Calcul des Structures, May 2019, Presqu’île de Giens (Var), France. ⟨hal-02523408⟩
  • Jean-Didier Garaud, Johann Rannou, Christophe Bovet, Sylvia Feld-Payet, Vincent Chiaruttini, et al.. Z-set -suite logicielle pour la simulation des matériaux et structures. 14ème Colloque National en Calcul des Structures, May 2019, Presqu’île de Giens (Var), France. ⟨hal-02115875⟩
  • Basile Marchand, Stéphane Quilici. Préconditionneur grille grossière pour la résolution par solveur itératif de problème éléments-finis fortement non-linéaires de grandes tailles. 14e colloque national en calcul des structures, May 2019, Presqu’île de Giens, France. ⟨hal-02077554⟩
  • Basile Marchand. Analyse par méta-modèle de la durée de vie du système barrière thermique des aubes de turbine en présence d’un défaut initial. Club des Utilisateurs du code Z-set, Mar 2019, Chatilon, France. ⟨hal-02077550⟩
  • Aurélien Fouque, Alexandre Bonhomme, Georges Cailletaud, François Chaudot, Vladimir A. Esin, et al.. Proposition d’une méthode visant à estimer l’énergie apportée par un arc à une anode en Ag-SnO2. 14ème Colloque sur les Arcs Electriques, Mar 2019, Bourges, France. ⟨hal-02152896⟩
  • David Gloaguen, Baptiste Girault, Bruno Courant, Pierre-Antoine Dubos, Marie-José Moya, et al.. Investigation par diffraction des neutrons du gradient de contraintes résiduelles dans des aciers élaborés par fusion laser sur lit de poudre. Journées Annuelles de la Société Française de Métallurgie et de Matériaux (JA SF2M 2019), Mar 2019, Paris, France. ⟨hal-04295584⟩
  • Faisal Islam, Lucien Laiarinandrasana, Sébastien Joannès. Effect of uncertainty in characterization on the variability of fibre strength distributions. ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Feb 2019, Varanasi, India. ⟨hal-02322007⟩
  • Ashok Rajpurohit, Vicky Singery, Sébastien Joannès, Philippe Sanial, Lucien Laiarinandrasana. Development and performance evaluation of inter-ply and intra-ply hybrid fabric reinforcements and their composites. ICRACM 2019 - 6th International Conference on Recent Advances in Composite Materials, Feb 2019, Varanasi, India. ⟨hal-02308847⟩
  • J. S Herrington, Yazid Madi, Jacques Besson, A. Amine A Benzerga. Modeling the 3D Plastic Anisotropy of a Magnesium Alloy Processed Using Severe Plastic Deformation. Magnesium Technology 2019, Feb 2019, San Antonio (Texas), United States. ⟨10.1007/978-3-030-05789-3_42⟩. ⟨hal-02437293⟩
  • Frantz Martin, Stephane Perrin, Loic Marchetti, Anne Cécile Bach, Caitlin Hurley, et al.. Hydrogen diffusion and trapping in FCC alloys: a quantitative approach based on experimental data and numerical analysis. Hydrogenius, I$^2$CNER and Hydromate Joint Research Symposium, Jan 2019, Fukuoka, Japan. ⟨cea-02927598⟩
  • M. Maisonneuve, C. Guerre-Boquillon, C. Duhamel, C. Crepin, I. de Curieres. Oxydation et corrosion sous contrainte d'aciers inoxydables ecrouis en milieu primaire des reacteurs a eau sous pression effet de l'oxygene dissous. Materiaux 2018, Nov 2018, Strasbourg, France. ⟨cea-02338871⟩
  • Ahmed Chaieb, N. Mozzani, A. Parrot, A. Ambard, Alain Köster, et al.. Anisothermal behaviour of unirradiated CWSR zircaloy-4 fuel clads under RIA conditions. Top Fuel 2018, Sep 2018, Prague, Czech Republic. 12 p. ⟨hal-01917119⟩
  • Ahmed Zouari, M. Bono, D. Le Boulch, Thomas Le Jolu, Jacques Besson, et al.. Expansion due to compression tests for RIA situtations. Top Fuel 2018, Sep 2018, Prague, Czech Republic. 12 p. ⟨hal-01917134⟩
  • Clément Soret, Joseph Marae Djouda, Mélissandre Bonnaudet, Murès Zarea, Yazid Madi. Implementation of a New Tool for Pipelines Integrity Evaluation: A Correlation Between Local Strains and Hardness. 2018 12th International Pipeline Conference, Sep 2018, Calgary, Canada. ⟨10.1115/IPC2018-78547⟩. ⟨hal-02437536⟩
  • Siham Hjiej, Nikolay Osipov, Adrien Lebrun, Clément Soret, Yazid Madi. Evaluation of the Fatigue Crack Growth Behavior by Experiments and Numerical Simulations on Full-Size Pipeline Steels. 2018 12th International Pipeline Conference, Sep 2018, Calgary, Canada. ⟨10.1115/IPC2018-78495⟩. ⟨hal-02437540⟩
  • T. Le Hong, Matthieu Le Saux, Jc. Brachet, J. Crepin, Q. Barres, et al.. Metallurgical evolutions of zirconium alloys containing high hydrogen contents during cooling from high temperature. Fontevraud 9 - International Symposium on Contribution of Materials Investigations and Operating Experience to Light Water NPPs' Safety, Performance and Reliability, Sep 2018, Avignon, France. ⟨cea-02417242⟩
  • Martinus P. Widjaja, Sébastien Joannès, Anthony Bunsell, G. Mair, Alain Thionnet. Defining a reduced volume zone for the simulation of burst test on a composite pressure vessels. ICSAAM 2018 - 8th International Conference on Structural Analysis of Advanced Materials, Aug 2018, Tarbes, France. 4 p. ⟨hal-01959246⟩
  • T. Petit, C. Ritter, Jacques Besson, Thilo F. Morgeneyer. Impact of machine stiffness and heat treatments on crack propagation instabilities in an Al-Mg-Si alloy. ECF 22 - 22nd European Conference on fracture : loading and environment effects on structural integrity, Aug 2018, Belgrade, Serbia. ⟨cea-02338735⟩
  • Pierre-Olivier Bouchard, Victor-Manuel Trejo-Navas, Modesar Shakoor, Ante Buljac, Marc Bernacki, et al.. Analysis of local strain in nodular graphite cast iron at the onset of coalescence by means of 3D numerical modeling combined with X-Ray laminography and digital volume correlation. WCCM 2018, Jul 2018, New-York, United States. ⟨hal-01858264⟩
  • Aurélien Fouque, Georges Cailletaud, Vladimir A. Esin, Romaric Landfried, Philippe Testé, et al.. Interaction between electric arc and Ag-SnO2 electrodes. 15th International High-Tech Plasma Processes Conference (HTPP2018), Jul 2018, Toulouse, France. ⟨hal-01927303⟩
  • Jennifer Blondel, Sébastien Joannès, Eveline Hervé-Luanco. Analytical and numerical-based approach to predict the influence of morphological fluctuations on the effective transverse elastic behaviour of a transversely random UD composite. ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. ⟨hal-02092734⟩
  • Ashok Rajpurohit, Vicky Singery, Sébastien Joannès, Philippe Sanial, Lucien Laiarinandrasana. Manufacturing and performance of hybrid fabric reinforcements and their composites. ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 8 p. ⟨hal-01958219⟩
  • Martinus P. Widjaja, Sébastien Joannès, Anthony R. Bunsell, Georg Mair, Alain Thionnet. The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel. ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 8 p. ⟨hal-01853254⟩
  • Jan Rojek, Sébastien Joannès, Mark Mavrogordato, Lucien Laiarinandrasana, Anthony Bunsell, et al.. Modelling the effect of porosity on the mechanical properties of unidirectional composites. The case of thick-walled pressure vessels. ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 7 p. ⟨hal-01958201⟩
  • Faisal Islam, Sébastien Joannès, Steve Bucknell, Yann Leray, Anthony Bunsell, et al.. Towards accurate and efficient single fibre characterization to better assess failure strength distribution. ECCM 18 - 18th European Conference on Composite Materials, Jun 2018, Athens, Greece. 7 p. ⟨hal-01958211⟩
  • Faisal Islam, Steve Bucknell, Yann Leray, Anthony Bunsell, Lucien Laiarinandrasana, et al.. Improvements in Determination of Carbon Fibre Strength Distribution Using Automation and Statistical Data. Fiber Society's Spring 2018 Conference, The Fiber Society, Jun 2018, Tokyo, Japan. ⟨hal-01959309⟩
  • A.-C. Bach, F. Martin, C. Duhamel, S. Perrin, J. Crepin. Effects of irradiation-induced defects on hydrogen uptake of a 316L stainless steel during oxidation in PWR primary water environment. 3rd International Conference on Metals and Hydrogen "SteelyHydrogen2018", May 2018, Gand, Belgium. ⟨cea-02339125⟩
  • Ante Buljac, Modesar Shakoor, Marc Bernacki, Pierre-Olivier Bouchard, Lukas Helfen, et al.. Effect of void arrangement on ductile damage mechanisms in nodular cast iron: in situ 3D measurements and micromechanical simulations . IUTAM Symposium on Size-Effects in Microstructure and Damage Evolution, May 2018, Lyngby, Denmark. ⟨hal-01814112⟩
  • Ilan Raphael, Nicolas Saintier, Lucien Laiarinandrasana, Gilles Robert. Investigation of the fatigue behavior of notched reinforced thermoplastics. 12th International Fatigue Congress (FATIGUE 2018), May 2018, Poitiers, France. ⟨10.1051/matecconf/201816507010⟩. ⟨hal-01805190⟩
  • C. Ling, S. Forest, J. Besson, B. Tanguy, F. Latourte. A reduced micromorphic single crystal plasticitymodel to study localization and void growth inductile metals. 16th Edition of the European Mechanics of Material conference, Mar 2018, Nantes, France. ⟨cea-02339062⟩
  • Tom Petit, C. Ritter, Thilo F. Morgeneyer, Jacques Besson. Impact of machine stiffnessand heat treatments on crack propagation instabilities in an Al-Mg-Si alloy. EMMC 16- 16TH EUROPEAN MECHANICS OF MATERIALS CONFERENCE, Mar 2018, Nantes, France. ⟨cea-02339079⟩
  • Andrea Rovinelli, Michael D. Sangid, Yoann Guilhem, Henry Proudhon, Ricardo Lebensohn, et al.. Combining Experiments and Models via a Bayesian Network Approach to Predict Short Fatigue Crack Growth. TMS 2018 Conference, Mar 2018, Phoenix, United States. ⟨hal-01738278⟩
  • Guillaume Reinhart, Lara Abou Khalil, Nathalie Mangelinck-Noël, Henri Nguyen-Thi, Vincent Maguin, et al.. Application of Fast X-ray Radiography to the In Situ and Real-time Observation of Ni-based Alloy Directional Solidification. TMS Conference, Mar 2018, Phoenix (AZ), United States. ⟨hal-04293966⟩
  • Stéphane Quilici, Basile Marchand. Préconditionnement des solveurs itératifs par résolution d’un problème sur grille grossière. Club des Utilisateurs du code Z-set, Feb 2018, Evry, France. ⟨hal-01966317⟩
  • Mathieu Salaun, Atul D. Sontakke, Vincent Maurel, Michel Bardet, Jean-Marie Mouesca, et al.. Lanthanide-free amorphous aluminum-borate micropowders: Broadband emitting phosphors for warm-white LED lighting. SPIE Photonics West, SPIE, Jan 2018, San Francisco, United States. ⟨hal-02002113⟩
  • Laurent Lacourt, Samuel Forest, Franck N'Guyen, David Ryckelynck, François Willot, et al.. Étude numérique de la nocivité des défauts dans les soudures. AUSSOIS-2018 Matériaux numériques : Microstructures et comportements thermomécaniques, MECAMAT, Jan 2018, Aussois, France. 5 p. ⟨hal-01678669⟩
  • Linda Rossmann, Brooke Sarley, Johnathan Hernandez, Peter Kenesei, Jonathan Almer, et al.. Method for conducting in situ high temperature DIC with simultaneous synchrotron measurements under thermomechanical load. 2018 AIAA/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Jan 2018, Kissimmee, France. 7 p., ⟨10.2514/6.2018-1375⟩. ⟨hal-01706983⟩
  • Ante Buljac, François Hild, Lukas Helfen, Thilo F. Morgeneyer. On deformation and damage micromechanisms in strong work hardening 2198 T3 aluminium alloy. 55th Annual Technical Meeting of the Society of Engineering Science (SES2018), 2018, Leganés, Spain. ⟨hal-01980061⟩
  • Ante Buljac, Modesar Shakoor, Victor-Manuel Trejo-Navas, Marc Bernacki, Pierre-Olivier Bouchard, et al.. De l’intégration de données mesurées dans les simulations numériques à l’échelle microscopique. 3es journées multiéchelles, 2018, Tours, France. ⟨hal-01980077⟩
  • Ante F Buljac, Modesar Shakoor, Victor-Manuel Trejo-Navas, Marc Bernacki, Pierre-Olivier Bouchard, et al.. On the integration of measured data in numerical simulations at the microscale. IDICs conference, Nov 2017, Barcelona, Spain. ⟨hal-01674837⟩
  • Thilo F. Morgeneyer, Ante F Buljac, Modesar Shakoor, Jan Neggers, Marc Bernacki, et al.. Micromechanical simulations and analyses based on synchrotron 3D imaging for nodular cast iron tested under different stress states. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. ⟨hal-01625141⟩
  • Quentin Tonizzo, Anne-Françoise Gourgues-Lorenzon, Matthieu Mazière, Astrid Perlade, I. Zuazo. Microstructure, comportement plastique et transition ductile-fragile d'un acier medium Mn dit "à basse densité" pour application automobile. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631399⟩
  • Anne-Françoise Gourgues-Lorenzon, Michel Bellet. Quelques exemples d'activités pédagogiques dans le domaine des matériaux. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631406⟩
  • Hiba Fekiri, Yves Bienvenu, Vladimir A. Esin, Vincent Maurel, Alain Köster, et al.. Matériau architecturé cuivre-Invar-cuivre produit par colaminage : évolution de la microstructure au cours de la fabrication. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631395⟩
  • Vincent Huleux, Loic Nazé, Vladimir A. Esin, Virginie Jaquet, Alain Köster, et al.. Etude de superalliages à base de Nickel contenant du Rhénium pour aubes monocristallines de turbine haute pression. Journées annuelles SF2M, SF2M (Société Française de Métallurgie et des Matériaux), Oct 2017, Lyon, France. 2 p. ⟨hal-01631173⟩
  • T. Le Hong, Matthieu Le Saux, J.-C. Brachet, J. Crepin. Secondary hydriding of zirconium-based fuel claddings at high temperature (LOCA conditions). Part 2: Effect of high hydrogen contents on metallurgical and mechanical properties. Part 1: Multi-scale study of hydrogen distribution. 23rd QUENCH workshop 2017, Oct 2017, Karlsruhe, Germany. ⟨cea-02417311⟩
  • Ante F Buljac, Modesar Shakoor, Jan Neggers, Marc Bernacki, Pierre-Olivier Bouchard, et al.. Numerical Validation Framework for Micromechanical Simulations Based on 3D Imaging. 7th GACM Colloquium on Computational Mechanics, Oct 2017, Stuttgart, Germany. ⟨hal-01674832⟩
  • L. Mateus Freire, E. Piozin, A. Courcelle, T. Guilbert, M. Sennour, et al.. Creep behaviour at high temperature of a stabilized austenitic steel for Gen-IV nuclear power plants. 4th international ECCC conference, Sep 2017, Dusseldorf, Germany. ⟨hal-02433876⟩
  • Danjela Kuscer, Tina Bakaric, André-Pierre Abellard, Julien Bustillo, Marc Lethiecq, et al.. High-frequency acoustic characterization of porous lead zirconate titanate for backing applications. 2017 IEEE International Ultrasonics Symposium (IUS) , Sep 2017, Washington, United States. ⟨hal-01634093⟩
  • Matthieu Mazière. Etude numérique paramétrique de la localisation de la déformation lors d'essais de traction. 23ème congrès français de mécanique, Aug 2017, Lille, France. 8 p. ⟨hal-01634926⟩
  • Gilles Rousselier. Rupture ductile plate/inclinée, nouveaux matériaux : des défis pour la modélisation. 23ème congrès français de mécanique, Aug 2017, Lille, France. 10 p. ⟨hal-01634936⟩
  • Mariem Trabelsi, Alain Köster, Vincent Maurel. Analyse de la vitesse de propagation de fissures de fatigue en plasticité généralisée en conditions de chargement biaxial. 23ème congrès français de mécanique, Aug 2017, Lille, France. 7 p. ⟨hal-01633863⟩
  • Y Swolfs, S. Pimenta, Alain Thionnet, Anthony R. Bunsell, L. Gorbatikh, et al.. A benchmarking exercise for three longitudinal strength models for unidirectional fibre-reinforced composites. 21th international conference on composite materials, Aug 2017, Xian, China, China. ⟨hal-03999608⟩
  • J. Nguejio, C. Guerre, F. Gaslain, C. Duhamel, J. Crepin, et al.. Diffusion processes as possible mechanisms for Cr depletion at SCC crack tip. 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Aug 2017, Portland, United States. pp.337-357, ⟨10.1007/978-3-319-67244-1_22⟩. ⟨cea-02435083⟩
  • Thierry Couvant, Jacqueline Caballero, Cecilie Duhamel, Jérôme Crépin, Takaharu Maeguchi. Calibration of the local IGSCC engineering model for Alloy 600. EDM 2017: Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Aug 2017, Portland, United States. pp.295-317. ⟨hal-01631874⟩
  • Josiane Nguejio, Jérôme Crépin, Cecilie Duhamel, Fabrice Gaslain, Catherine Guerre, et al.. Diffusion processes as possible mechanisms for Cr depletion at SCC crack tip. EDM 2017: Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Aug 2017, Portland, United States. pp.337-357. ⟨hal-01631795⟩
  • Elizabeth Chaumun, Jérôme Crépin, Cecilie Duhamel, Catherine Guerre, Eva Héripré, et al.. Stress corrosion cracking initiation of alloy 82 in hydrogenated steam. EDM 2017: Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Aug 2017, Portland, United States. pp.175-189. ⟨hal-01631933⟩
  • Anne-Cécile Bach, Frantz Martin, Cecilie Duhamel, Stéphane Perrin, François Jomard, et al.. Hydrogen trapping by irradiation-induced defects in 316L stainless steel. EDM 2017: Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors, Aug 2017, Portland, United States. pp.337-357. ⟨hal-01631788⟩
  • Andrea Rovinelli, Michael D. Sangid, Ricardo A. Lebensohn, Wolfgang Ludwig, Yoann Guilhem, et al.. Microstructurally-short crack growth driving force identification: combining DCT, PCT, crystal plasticity simulation and machine learning technique. 3rd International Congress on 3D Materials Science (3DMS 2016), Jul 2017, St. Charles, United States. ⟨hal-02116315⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Andrei Shvarts, Jean-François Molinari, Georges Cailletaud. Modeling creeping flow through a closed crack with a self-affine geometry and an extension to permeability of cracked media . Poromechanics VI, Jul 2017, Paris, France. pp.1241-1248, ⟨10.1061/9780784480779.154⟩. ⟨hal-01632328⟩
  • Sébastien Joannès. Polymer fibres : Multiaxial mechanical characterisation at the single fibre scale. ACE-X 2017 - 11th International Conference on Advanced Computational Engineering and Experimenting, Jul 2017, Vienna, Austria. ⟨hal-02062227⟩
  • Pierre-Yves Rohan, Hélène Pillet, Wafa Skalli, Julien Trnka, Mathieu Manaserro, et al.. Functional evaluation of anterior cruciate ligagment autografts in pre-clinical animal models. 23rd Congress of the European Society of Biomechanics, Jul 2017, Séville, Spain. ⟨hal-02305906⟩
  • Jamie Frame, Pierre-Yves Rohan, Laurent Corte, Rachele Allena. Simulating the Remodelling of Bone around Implants. 23rd Congress of European Society of Biomechanics, Jul 2017, Séville, Spain. ⟨hal-02269991⟩
  • Fabien Coussa, Jacques Renard, Sébastien Joannès, Rémy Bompoint, Nicolas Feld. Influence de la vitesse sur le comportement mécanique de composites tissés à matrice thermoplastique. JNC 20 - 20èmes Journées Nationales sur les Composites, École des Ponts ParisTech (ENPC), Jun 2017, Champs-sur-Marne, France. 10 p. ⟨hal-01621625⟩
  • Marc Maisonneuve, Cecilie Duhamel, Catherine Guerre, Jérôme Crépin, Ian De Curières, et al.. Oxydation d'un acier inoxydable 316L écroui en milieu primaire des réacteurs à eau sous pression. Journées jeunes chercheurs 2017, Jun 2017, Dijon, France. pp.139-145. ⟨hal-01549202⟩
  • Anne-Cécile Bach, Frantz Martin, Cecilie Duhamel, Stéphane Perrin, François Jomard, et al.. Piégeage de l'hydrogène par les défauts d'irradiation dans un acier inoxydable 316L. Journées jeunes chercheurs 2017, Jun 2017, Dijon, France. pp.39-45. ⟨hal-01549177⟩
  • Q. Huang, Cecilie Duhamel, Y. Charles, M. Gaspérini, Jérôme Crépin. Effet du trajet de chargement sur l'amorçage de fissures de corrosion sous contrainte dans les aciers inoxydables écrouis. Journées jeunes chercheurs 2017, Jun 2017, Dijon, France. pp.131-138. ⟨hal-01549182⟩
  • Ante F Buljac, Modesar Shakoor, Jan Neggers, Marc Bernacki, Pierre-Olivier Bouchard, et al.. Numerical Validation Framework for Micromechanical Simulations Based on Synchrotron Imaging. SEM conference, Jun 2017, Indianapolis, United States. ⟨hal-01674839⟩
  • Hélène Sapardanis, Vincent Guipont, François Borit, Antoine Debray, Alain Köster, et al.. Study of the interface strength and residual stresses within plasma sprayed alumina coatings involving LASAT (Laser Shock Adhesion Test). International thermal spray conference 2017, Jun 2017, Dusseldorf, Germany. pp.315-321. ⟨hal-01549085⟩
  • Margaux Bunel, François Borit, Francesco Delloro, Michel Jeandin, A. Bacciochini, et al.. Experimental and numerical study of the influence of powder characteristics in the cold spraying of Al-based alloys for additive manufacturing using low-pressure, medium-pressure and high-pressure cold spray facilities. International thermal spray conference 2017, Jun 2017, Dusseldorf, Germany. pp.719-724. ⟨hal-01549097⟩
  • C. Fellah, J. Braun, C. Sauder, Marie-Hélène Berger. Influence de la surface des fibres de carbone sur le comportement mecanique des composites Cf/SiCm. SFEC 2017 Colloque Annuel de la Societe Francophone d'Etude des Carbones, May 2017, Saint Pierre D'Oleron, France. ⟨hal-02433878⟩
  • Moubine Al Kotob, Samuel Forest, Matthieu Mazière, Christelle Combescure, Tonya Rose. Méthode systématique de prévision de bifurcations élastoplastiques pour différentes formulation en transformatons finies. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815858⟩
  • Clément Olivier, David Ryckelynck, Julien Cortial, Christian Rey. Méthode de décomposition tensorielle pour la calibration de lois de comportement en sciences des matériaux. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815772⟩
  • Albane Borocco, Clémentine Fellah, James Braun, Marie-Hélène Berger, Petr Dokládal. Morphological Characterization of Graphene Plans Stacking. ISMM 2017, May 2017, Fontainebleau, France. pp.435-446, ⟨10.1007/978-3-319-57240-6_35⟩. ⟨hal-01482431⟩
  • Basava-Raju Akula, Vladislav Yastrebov, Julien Vignollet, Georges Cailletaud. Domain tying across virtual interfaces : coupling X-FEM with the Mortar method. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815998⟩
  • Tuan Dinh-Trong, David Ryckelynck, Sofiane Hendili, Mickaël Abbas. Modèle hyper-réduit directionnel pour la prévision simplifiée des contraintes résiduelles de soudage. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815780⟩
  • William Hilth, David Ryckelynck. Etablissement et calibration d'un modèle mécanique simplifié pour un sable artificiellement cimenté. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815751⟩
  • Andrei G Shvarts, Vladislav Yastrebov, Georges Cailletaud. A strong fluid/structure coupling scheme for thin incompressible flow in the contact interface at the roughness scale. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815811⟩
  • Francesco Bettonte, Sylvia Feld-Payet, Stéphane Andrieux, David Lévêque, Jacques Besson. Analyse de l'impact du filtrage de conditions au bord bruitées sur un calcul éléments fins. 13e colloque national en calcul des structures, Université Paris-Saclay, May 2017, Giens, Var, France. ⟨hal-01815847⟩
  • Florent Coudon, Stéphane Gourdin, Lionel Marcin, Georges Cailletaud. Modélisation viscoplastique du comportement de structure oligogranulaires en alliages à solidification dirigée. 13e colloque national en calcul des structures, May 2017, Giens, Var, France. ⟨hal-01815828⟩
  • Pierre-Olivier Bouchard, Victor-Manuel Trejo-Navas, Modesar Shakoor, Marc Bernacki, Thilo F. Morgeneyer, et al.. Numerical modeling of ductile fracture at the microscale combined with x-ray laminography and digital volume correlation.. 20th International ESAFORM Conference on Material Forming (ESAFORM 2017), Apr 2017, Dublin, Ireland. pp.Article number 160016, ⟨10.1063/1.5008191⟩. ⟨hal-01558442⟩
  • H. Bargaoui, Farida Azzouz, Georges Cailletaud, D. Thibault. Modeling and experimental characterization of the deformation of PUCB sand cores during casting. metal casting congress, American Foundry Society, Apr 2017, Milwaukee, United States. ⟨hal-04074946⟩
  • Philippe Testé, Romaric Landfried, Frédéric Houzé, Aurélien Fouque, Georges Cailletaud, et al.. Détermination des caractéristiques du flux de puissance apporté à des électrodes en AgSnO2 par un arc non stationnaire dans l’air. XIIIème Colloque sur les Arcs Electriques et Workshop Arcs et Contacts Electriques (CAE XIII ACE 2017), Mar 2017, Nancy, France. ⟨hal-01481584⟩
  • Andrea Rovinelli, Michael D. Sangid, Ricardo A. Lebensohn, Wolfgang Ludwig, Yoann Guilhem, et al.. A General Probabilistic Framework Combining Experiments and Simulations to Identify the Small Crack Driving Force. TMS 2017 Conference, Feb 2017, San Diego, United States. ⟨hal-01580015⟩
  • Ivan Coppo, Fang Lu, Modesar Shakoor, Sabine Cantournet, Noëlle Billon, et al.. Génération et homogénéisation de vers pour composites thermoplastiques à renforts discontinus.. 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France. ⟨hal-01504510⟩
  • Thilo F. Morgeneyer, Ante Buljac, Modesar Shakoor, Victor-Manuel Trejo-Navas, Jan Neggers, et al.. Endommagement ductile : mesures volumiques et simulations micromécaniques. . 3èmes Journées Matériaux Numériques, Jan 2017, Tours, France. ⟨hal-01504482⟩
  • Mariem Trabelsi, Alain Köster, Vincent Maurel. Etude de la propagation et de la bifurcation de fissures de fatigue en plasticité généralisée. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 3 p. ⟨hal-01708353⟩
  • Laurent Lacourt, B. Figliuzzi, Samuel Forest, David Ryckelynck, François Willot, et al.. Étude de la nocivité des défauts dans les soudures et les pièces obtenues par fabrication additive. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p. ⟨hal-01678663⟩
  • Louise Briez, Vladimir A. Esin, Alain Köster, M. Pachoutinsky, Jérôme Crépin. Influence de la température et du temps du vieillissement sur la microstructure et les propriétés mécaniques de l'alliage d'aluminium 2024 pour application aéronautique. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p. ⟨hal-01707907⟩
  • Raphaël Cusset, Farida Azzouz, Jacques Besson, Henry Proudhon, Marta Dragon-Louiset, et al.. Effect of residual stress and strain on the fatigue crack propagation in Al2024T351 structures. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 2 p. ⟨hal-01707914⟩
  • Manon Abecassis, Vincent Maurel, Alain Köster. Fissuration dans un joint soudé en alliages de titane sous sollicitation multiaxiale. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p. ⟨hal-01707896⟩
  • Fabrizio Pagano, M. Kaminski, Alain Thionnet. Evolution de la rupture des fibres en fatigue dans un composite unidirectionnel à fibres longues. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p. ⟨hal-01708344⟩
  • Hayat Abdesselam, Thilo F. Morgeneyer, Jérôme Crépin, Anne Laure Rouffié, A Seror, et al.. Compréhension des mécanismes d'amorçage en fatigue d'un acier à très haute résistance. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 3 p. ⟨hal-01707850⟩
  • Juan Manuel Garcia, Thilo F. Morgeneyer. Mechanical characterization of titanium alloys linear friction welds. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p. ⟨hal-01708022⟩
  • Vincent Maurel. Propagation de fissures de fatigue en plasticité généralisée. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 6 p. ⟨hal-01707876⟩
  • Marc Lethiecq, Danjela Kuscer, Julien Bustillo, André-Pierre Abellard, Tina Bakaric, et al.. Porous lead zirconate titanate ceramics with optimized acoustic properties for high-frequency ultrasonic transducer applications. Acoustical Society of America (ASA) 174th Meeting, 2017, New Orleans, LA, USA, United States. pp.2576, ⟨10.1121/1.5014416⟩. ⟨hal-01741053⟩
  • François Rasselet, Sébastien Joannès, Emilie Roche, Sébastien Pautard, Jacques Renard. A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE. Digimat Users’ Conference 2016, Oct 2016, Cascais, Portugal. ⟨hal-02062205⟩
  • A F Buljac, M Shakoor, J Neggers, Marc Bernacki, Pierre-Olivier Bouchard, et al.. Numerical Validation Framework for Micromechanical Simulations based on Synchrotron Imaging. Multiscale modeling of heterogeneous structures, Sep 2016, Dubrovnik, Croatia. ⟨hal-01385416⟩
  • E. Rodríguez-Vidal, C. Sanz, J. Lambarri, Jacques Renard, Vladimir Gantchenko. Laser joining of different polymer-metal configurations : analysis of mechanical performance and failure mechanisms. 9th international conference on photonic technologies - LANE 2016, Sep 2016, Furth, Germany. pp.1110-1117, ⟨10.1016/j.phpro.2016.09.002⟩. ⟨hal-01421618⟩
  • Yoann Guilhem, Stéphanie Basseville, Georges Cailletaud, Thomas Ghidossi, Henry Proudhon, et al.. Identifying the relevant parameters for a mesoscopic fatigue criterion using crystal plasticity finite element simulations of polycrystalline aggregates. International Conference on Fatigue Damage of Structural Materials XI (FATDXI), Sep 2016, Hyannis, United States. ⟨hal-01580019⟩
  • A-C. Bach, J. Crepin, C. Duhamel, F. Martin, S. Perrin. Study of the interactions between hydrogen and irradiation-induced defects in 316L stainless steel. Eurocorr 2016, Sep 2016, Montpellier, France. ⟨cea-02442340⟩
  • Fabien Coussa, Jacques Renard, Sébastien Joannès, Rémy Bompoint, Nicolas Feld. Experimental and numerical study of the elastic and damage strain rate sensitivity of GFRP composites. ICCS 19 - 19th International Conference on Composites Structures, Sep 2016, Porto, Portugal. ⟨hal-02062198⟩
  • Ante Buljac, Thibault Taillandier-Thomas, Thilo F. Morgeneyer, Lukas Helfen, Stéphane Roux, et al.. In situ observations of strained bands and ductile damage in thin aluminum alloy sheets. 24th International Congress of Theoretical and Applied Mechanics, Aug 2016, Montreal, Canada. ⟨hal-01385418⟩
  • Alexandre Hermant, Eric Suzon, Jacques Bellus, Philippe Petit, François Cortial, et al.. Hot deformation behaviour and recrystallization mechanisms in a niobium stabilized austenitic stainless steel. 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016), Jul 2016, Pittsburgh, United States. pp.209-214, ⟨10.1007/978-3-319-48770-0-31⟩. ⟨hal-01496684⟩
  • Fadi El Haddad, Lionel Fourment, David Ryckelynck, François Bay. Application of P.O.D. and D.E.P.O.D. model reduction methods to semi-thick sheet metal forming. NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, The Minerals, Metals & Materials Society, Jul 2016, Troyes, France. ⟨hal-01443554⟩
  • Weijie Liu, Carl Labergere, Houssem Badreddine, Samuel Forest, Ping Hu. Nonlocal constitutive equations of elasto-visco-plasticity coupled with damage and temperature. NUMIFORM 2016: The 12th International Conference on Numerical Methods in Industrial Forming Processes, Jul 2016, Troyes, France. pp.01002, ⟨10.1051/matecconf/20168001002⟩. ⟨hal-02279659⟩
  • E. Chaumun, E. Heripré, M. Sennour, C. Duhamel, C. Guerre, et al.. Couplage de techniques de microscopies électroniques, mesures de champs et calculs pour l’étude de l'influence des paramètres microstructuraux sur l’amorçage de fissures en corrosion sous contrainte.. Colloque ' La métallurgie, quel avenir!' bicentenaire de l'Ecole des Mines de Saint Etienne, Jun 2016, Saint Etienne, France. ⟨cea-02442295⟩
  • François Rasselet, Sébastien Joannès, Emilie Roche, Sébastien Pautard, Jacques Renard. A morphological indicator for the description of the short-fiber position effect on the behaviour of a periodic RVE. ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany. ⟨hal-02062177⟩
  • Sébastien Joannès, Eveline Hervé-Luanco. A rational fibre packing description to model and predict the effective diffusivity/conductivity of a transversely random UD composite: An analytical and numerical based appraoch. ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany. ⟨hal-02062183⟩
  • Clément Soret, Yazid Madi, Jacques Besson. Justification of weld overmatch for strain based design applications . Twenty-sixth (2016) International Ocean and Polar Engineering Conference, Jun 2016, Rhodes, Greece. pp.406-415. ⟨hal-01421639⟩
  • C. Fellah, Marie-Hélène Berger, J. Braun, C. Sauder, S. Poissonnet. HRTEM investigation of local damage mechanisms at fiber/matrix interface of SiC/SiC composites. 9th International Conference on High Temperature Ceramic Matrix Composites 2016, Jun 2016, Toronto, Canada. ⟨hal-02416297⟩
  • Alain Thionnet, Quentin Roirand, Lucien Laiarinandrasana. Architectural design of 3D woven composites assisted by FE multiscale modelling. 17th european conference on composite materials, Jun 2016, Munich (Allemagne), Germany. ⟨hal-03999569⟩
  • Michel Jeandin, François Borit, Nicole Fabregue, Gilles Rolland, Francesco Delloro. An artistic approach to thermal spray. Thermec 2016, May 2016, Graz, Austria. pp.15-28, ⟨10.4028/www.scientific.net/MSF.879.15⟩. ⟨hal-01421935⟩
  • I. Turque, R. Chosson, M. Le Saux, J. C. Brachet, V. Vandenberghe, et al.. Mechanical behavior at high temperature of highly oxygen- or hydrogen-enriched $\alpha$ and (prior-)$\beta$ phases of zirconium alloys. 18th International Symposium on Zirconium in the Nuclear Industry, May 2016, Hilton Head, United States. ⟨hal-02441977⟩
  • Isabelle Turque, Raphaël Chosson, Matthieu Le Saux, Jean-Christophe Brachet, Valérie Vandenberghe, et al.. Mechanical behavior at high temperatures of highly oxygen- or hydrogen-enriched α and (Prior-) β phases of zirconium alloys. 18th International symposium on zirconium in the nuclear industry, May 2016, Hilton Head Island, SC, United States. pp.240-280, ⟨10.1520/STP159720160063⟩. ⟨hal-01702107⟩
  • David Moreau, Laurent Corté, François Borit, Vincent Guipont. Cold spray of agglomerated submicronic hydroxyapatite powders for biomedical applications. ITSC 2016, DVS, May 2016, Shanghai, China. 6 p. ⟨hal-01337719⟩
  • Vincent Bortolussi, François Borit, Anthony Chesnaud, Michel Jeandin, Matthieu Faessel, et al.. Cold spray of metal-polymer composite coatings onto carbon fiber-reinforced polymer (CFRP). International Thermal Spray Conference 2016 (ITSC 2016), DVS, May 2016, Shanghai, China. 7 p. ⟨hal-01337696⟩
  • Pierre-Emmanuel Leger, François Borit, Nicole Fabregue, Michel Jeandin, M. Ducos. Influence of powder characteristics on the microstructure and bond strength of cold-sprayed aluminum coating. ITSC 2016, DVS, May 2016, Shanghai, China. 6 p. ⟨hal-01337708⟩
  • F. Gouraud, Yang Zhang, Michel Boussuge, David Ryckelynck, Marc Huger, et al.. Caractérisation expérimentale du comportement mécanique d’un réfractaire électrofondu à très haute teneur en zircone. Journées Annuelles du Groupe Français de la Céramique, LMCPA, Mar 2016, Valenciennes, France. ⟨hal-01847623⟩
  • Andrea Rovinelli, Michael D. Sangid, Ricardo A. Lebensohn, Wolfgang Ludwig, Yoann Guilhem, et al.. Microstructurally-Short Crack Growth Driving Force Identification: Combining DCT, PCT, Crystal Plasticity Simulations and Machine Learning Technique. TMS 2016 Conference, Feb 2016, Nashville, United States. ⟨hal-01580016⟩
  • Alain Thionnet, Anthony R. Bunsell. Fibre break failure processes in unidirectional composites: evaluation of critical damage states. Multiscale modelling of the structural integrity of composite materials, Theo Murphy international scientific meeting, Royal Society, Jan 2016, Londres, United Kingdom. ⟨hal-03999560⟩
  • Thomas Geoffroy, Jean-Christophe Riou, Eric Bailly, Gilles Tarisse, Yves Bienvenu. Influence of thermo-mechanical stress on the microstructure of sintered silver joints for microelectronics . 2015 IEEE CPMT Symposium Japan (ICSJ), Nov 2015, Kyoto, Japan. pp.62-65, ⟨10.1109/ICSJ.2015.7357360⟩. ⟨hal-01336867⟩
  • A.-L. Rouffié, J. Crepin, B. Tanguy, S. Vincent. Effets de la microstructure, de la texture et du vieillissement thermique sur la rupture fragile des aciers ODS. Journees annuelles de la SF2M, Oct 2015, Paris, France. ⟨hal-02445705⟩
  • A. Rouffie, J. Crepin, B. Tanguy, S. Vincent. Effets de la microstructure, de la texture et du vieillissement thermique sur la rupture fragile des aciers ODS. Journées annuelles de la SF2M 2015 - Matériaux et conversion d'énergie, Oct 2015, Paris, France. ⟨cea-02492550⟩
  • A Bouterf, A Buljac, L Helfen, Francois Hild, Thilo F. Morgeneyer, et al.. Contributions of volume correlation to the study of brittle and ductile damage. WORKSHOP MIST Friction, Fracture, Failure [ Microstructural Effects], Oct 2015, Montpellier, France. ⟨hal-01385630⟩
  • Vladislav Yastrebov, Georges Cailletaud, Sophie Noël, Frederick Sorel Mballa-Mballa Mballa Mballa, Henry Proudhon, et al.. Three-level multi-scale modeling of electrical contacts - sensitivity study and experimental validation. 61st IEEE Holm Conference on Electrical Contacts, Oct 2015, San Diego, United States. pp.414-422, ⟨10.1109/HOLM.2015.7355130⟩. ⟨hal-01218663⟩
  • Pierre Baudoin, Matthieu Mazière, Jean-Francois Witz, Vincent Magnier, Ahmed El Bartali, et al.. Numerical and experimental investigation of Lüders bands propagation. 25th International Workshop on Computational Mechanics of Materials (IWCMM 25), Oct 2015, Bochum, Germany. ⟨hal-01771050⟩
  • Pierre-Alexis Poulet, Lucien Laiarinandrasana, Sébastien Joannès. Effet de la variabilité de la microstructure sur les propriétés mécaniques d’un composite UD thermoplastique. Cas de la flexion à trois points. DEPOS 26 - 26ème congrès sur la déformation des polymères solides, Sep 2015, Brest, France. ⟨hal-02073787⟩
  • Davide Colombo, Sabine Cantournet, François Lequeux, Hélène Montes, Karine Legorju. Towards constitutive equation for non-linear mechanics of PDMS-nanosilica. Constitutive Models for Rubbers IX, Sep 2015, Prague, Czech Republic. pp.299-303. ⟨hal-01802653⟩
  • Damien Halm, B. Magneville, Jacques Renard, Philippe Saffré, Stéphane Villalonga. Optimisation des réservoirs composites de stockage hyperbare de l’hydrogène : bilan du projet Osirhys IV. 22ème Congrès Français de Mécanique, Aug 2015, Lyon, France. ⟨hal-01675006⟩
  • Fabien Coussa, Jacques Renard, Sébastien Joannès, R. Bompoint, N. Feld. Une démarche préliminaire vers une caractérisation fiable en dynamique "application à un composite thermoplastique". CFM 2015 - 22ème congrès français de mécanique, Aug 2015, Lyon, France. 5 p. ⟨hal-01251207⟩
  • Hélène Sapardanis, Vincent Maurel, Alain Köster, François Borit, Steve Duvinage, et al.. Influence du cisaillement macroscopique sur la propagation d'une fissure située à l'interface d'un revêtement céramique et d'un substrat métallique. 22ème congrès français de mécanique, Aug 2015, Lyon, France. 3 p. ⟨hal-01236478⟩
  • Joseph Marae Djouda, Yazid Madi, Fabrice Gaslain, Jérémie Béal, Benoît Panicaud, et al.. Mécanismes locaux de déformation de l'acier inoxydable austénitique 316L. 22ème congrès français de mécanique, Aug 2015, Lyon, France. 3 p. ⟨hal-01251129⟩
  • Florent Coudon, Georges Cailletaud, Jonathan Cormier, Lionel Marcin. Une approche multi-échelle pour la modélisation du comportement mécanique d'un superalliage base nickel à solidification dirigée. 22ème congrès français de mécanique, Aug 2015, Lyon, France. 2 p. ⟨hal-01237603⟩
  • Q. Shi, F. Latourte, Georges Cailletaud. Micro-mechanical failure model of a ferritic-bainitic steel : consequence and interests of a dual-phase polycrystalline model. 22ème congrès français de mécanique, Aug 2015, Lyon, France. 25 p. ⟨hal-01237394⟩
  • Samuel Forest. Construction d'opérateurs de régularisation à partir de l'approche micromorphe de la plasticité et de l'endommagement à gradient. 22ème congrès français de mécanique, Aug 2015, Lyon, France. 5 p. ⟨hal-01251189⟩
  • Sébastien Dezecot, Jean-Yves Buffiere, Alain Köster, Vincent Maurel, Fabien Szmytka. Characterization of damage in a cast aluminum alloy during cyclic loading test at high temperature by x-ray tomography. COM 2015 : The conference of metallurgists, Aug 2015, Toronto, Canada. 13 p. ⟨hal-01237859⟩
  • Jacqueline Caballero, Cecilie Duhamel, Thierry Couvant, Jérôme Crépin. Intergranular oxidation of alloy 600 exposed to simulated PWR primary water. 17th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2015, Ottawa, Canada. 19 p. ⟨hal-01236369⟩
  • Thierry Couvant, Mickael Wehbi, Cecilie Duhamel, Jérôme Crépin, Rémi Munier. Grain boundary oxidation of nickel base welds 182/82 in simulated PWR primary water. 17th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2015, Ottawa, Canada. 25 p. ⟨hal-01236374⟩
  • Elizabeth Chaumun, Jérôme Crépin, Cecilie Duhamel, Catherine Guerre, Eva Heripre, et al.. SCC crack initiation in nickel based alloy welds in hydrogenated steam at 400°C. 17th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2015, Ottawa, Canada. 19 p. ⟨hal-01236330⟩
  • Maya Geagea, Ivaylo Genov, Zdravko Stoynov, Daria Vladikova, Anthony Chesnaud, et al.. Permeability of gases In the anode of An anode-supported SOFC. SOFC-XIV: Anodes 2, Jul 2015, Glasgow, United Kingdom. ⟨10.1149/06801.1185ecst⟩. ⟨hal-01195562⟩
  • Maya Geagea, Jian Ouyang, Bo Chi, Francesco Delloro, Anthony Chesnaud, et al.. Architectured interfaces and electrochemical modelling in an anode supported SOFC. SOFC-XIV: Anodes 2, Jul 2015, Glasgow, United Kingdom. ⟨10.1149/06801.2961ecst⟩. ⟨hal-01199302⟩
  • David Masson, Bassam Abdallah, François Willot, Dominique Jeulin, Elisa Mercadelli, et al.. Morphological modeling of a metal foam SOFC configuration. SOFC-XIV: Anodes 2, Jul 2015, Glasgow, United Kingdom. pp.2951-2960, ⟨10.1149/06801.2951ecst⟩. ⟨hal-01142056v2⟩
  • David Masson, Francesco Perrozzi, Paolo Piccardo, Massimo Viviani, Claire Pilot, et al.. Shaping of a dual membrane SOFC and first electrochemical tests in a dedicated 3- chamber set-up. SOFC-XIV: Anodes 2, Jul 2015, Glasgow, United Kingdom. ⟨10.1149/06801.1969ecst⟩. ⟨hal-01199467⟩
  • Meng Xu, David Masson, David Ryckelynck, Anthony Chesnaud, Alain Thorel. Modelling and prediction of deformation during sintering of a metal foam based SOFC (EVOLVE). SOFC-XIV: Anodes 2, Jul 2015, Glasgow, United Kingdom. ⟨10.1149/06801.2971ecst⟩. ⟨hal-01199451⟩
  • Pierre-Alexis Poulet, Sébastien Joannès, Lucien Laiarinandrasana. Influence de la microstructure sur l’endommagement transverse d’un composite unidirectionnel à matrice thermoplastique. JNC 19 - 19èmes Journées Nationales sur les Composites, Jun 2015, Lyon, Villeurbane, France. ⟨hal-02062123⟩
  • Sylvain Dépinoy, Caroline Toffolon-Masclet, Anne-Françoise Gourgues-Lorenzon, E. Kozeschnik, Bernard Marini, et al.. Evolution of microstructure during tempering and its influence on the mechanical behavior of 2.25Cr-1Mo bainitic steel. PTM 2015 - International conference on solid-solid phase transformations in inorganic materials, Jun 2015, Whistler, Canada. 8 p. ⟨hal-01292313⟩
  • Olivier Ther, Christophe Colin, A. Dourfaye. Functionally graded cemented carbides elaboration by imbibition process—Better understanding of liquid migration and homogenization mechanisms for an improved process. Proceedings of FiMPART 2015, Jun 2015, Hyderabad, India. pp.93-106. ⟨hal-01678345⟩
  • Farida Azzouz, A. Gaubert, P. Kanouté, C. Moriconi. Cyclic inelastic constitutive equations of the hot turboengine components. 4th International Conference on Materials Modeling (ICMM4), May 2015, Berkeley, United States. ⟨hal-04088134⟩
  • Yoann Guilhem, Stéphanie Basseville, Georges Cailletaud. Étude numérique de l'influence des propriétés microstructurales et de la rugosité de surface sur la localisation des champs mécaniques locaux dans les polycristaux. 34ème Journées de Printemps, SF2M, May 2015, Paris, France. 6 p. ⟨hal-01580038⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin. Modélisation du Comportement Plastique des Matériaux Auxétiques. 12e Colloque national en calcul des structures (CSMA 2015), CSMA, May 2015, Giens, France. ⟨hal-01514288⟩
  • Fadi El Haddad, David Ryckelynck, François Bay, Lionel Fourment. Model order reduction applied to metal forming. 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France. ⟨hal-01515068⟩
  • Yi Zhang, Eric Lorentz, Jacques Besson. Modélisation et simulation robuste de l'endommagement ductile. 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France. ⟨hal-01515056⟩
  • Nissrine Akkari, Fatima Daim, David Ryckelynck. Sur la sensibilité paramétrique de l'Hyper-réduction en Dynamique des structures. 12e Colloque national en calcul des structures, CSMA, May 2015, Giens, France. 4 p. ⟨hal-01517285⟩
  • C. Duhamel, M. Sennour, Frédéric Georgi, C. Guerre, E. Chaumun, et al.. Characterization of oxide scales formed on Alloy 82 in nominal PWR primary water at 340 degrees C and in hydrogenated steam at 400 degrees C. USNRC 2015 Meeting – International Cooperative Group for Environmentally Assisted Cracking, May 2015, Ann Harbor, United States. ⟨cea-02500813⟩
  • Julien Teixeira, Benoit Denand, Elisabeth Aeby-Gautier, Sabine Denis, Georges Cailletaud. Simulation of coupled temperature, microstructure and internal stresses evolutions during quenching of a beta-metastable titanium alloy. Proceedings of the 13th World Conference on Titanium, May 2015, San Diego, United States. pp.677-682. ⟨hal-01633923⟩
  • Clement Soret, Yazid Madi, Jacques Besson, Vincent Gaffard. Use of the sent specimen in pipeline design. 20th JTM - EPRG European pipeline research group, May 2015, Paris, France. 34 p. ⟨hal-01183303⟩
  • F. Gaslain, H.-T. Le, C. Duhamel, C. Guerre, P. Laghoutaris. The role of intergranular chromium carbides on stress corrosion cracking of nickel base alloys in pwr primary water. EMAS worshop 2015, May 2015, Portoroz, Slovenia. ⟨cea-02509151⟩
  • Olivier Ther, Christophe Colin, Malik Yahiaoui, Jean-Yves Paris, Jean Denape, et al.. Elaboration de carbures cémentés à gradient de propriétés par imbibition réactive : application au forage pétrolier. Science et Technologie des Poudres et Poudres et Matériaux Frittés STPMF, Apr 2015, Nancy, France. pp.0. ⟨hal-01977434⟩
  • Olivier Ther, Christophe Colin, Malik Yahiaoui, Jean-Yves Paris, Jean Denape, et al.. Elaboration de carbures cémentés à gradient de propriétés par imbibition réactive : application aux inserts d'outils tricône pour le forage pétrolier et minier. Récents Progrès en Génie des Procédés, Apr 2015, Nancy, France. 2.6, 8 p. ⟨hal-01163365⟩
  • Frédéric Royer, Nathalie Dupin, Yves Bienvenu. Degré de métastabilité obtenu en fabrication additive (SLM) de superalliages à base de nickel. Récents Progrès en Génie des Procédés, Apr 2015, Nancy, France. 2.9, 7 p. ⟨hal-01163890⟩
  • Jacqueline Caballero, Jérôme Crépin, Thierry Couvant, Cecilie Duhamel. Oxydation intergranulaire de l'alliage 600 exposé au milieu primaire des réacteurs à eau sous pression. Journées jeunes chercheurs 2015, Apr 2015, Saint-Etienne, France. pp.23-30. ⟨hal-01163938⟩
  • Pierre-Alexis Poulet, Sébastien Joannès, Lucien Laiarinandrasana. Durability assessment of a highly reinforced thermoplastic composite: Experimental and microstructural simulations of the transverse damage kinetics. ICFC 6 - 6th International Conference on Fatigue of Composites, Mar 2015, Paris, France. ⟨hal-02062078⟩
  • Ante Buljac, Thibault Taillandier-Thomas, Thilo F. Morgeneyer, Lukas Helfen, Stéphane Roux, et al.. Experimental analysis of ductile failure under low triaxialities early strain localization precedes crack path . IUTAM Symposium on DUCTILE FAILURE AND LOCALIZATION, Mar 2015, Paris, France. ⟨hal-01385640⟩
  • Georges Cailletaud, Stéphanie Basseville, Yoann Guilhem. Crystal plasticity in fatigue. EUROMECH 577 Micromechanics of Metal Ceramic Composites, Mar 2015, Stuttgart, Germany. ⟨hal-01579912⟩
  • Vladislav Yastrebov, G. Anciaux, Frederick Mballa Mballa, Georges Cailletaud, Jean-François Molinari, et al.. Multi-physical contact between elastic and elasto-plastic solids with fractal surfaces. MMM 2014, Oct 2014, Berkeley, United States. pp.284. ⟨hal-01099232⟩
  • Frederick Mballa Mballa, Vladislav Yastrebov, Frédéric Houzé, Georges Cailletaud, Sophie Noël, et al.. Multiscale modeling of electrical contacts . MPMS 2014, ENSTA ParisTech, Oct 2014, Palaiseau, France. ⟨hal-01099234⟩
  • Rémy Her, Jacques Renard, Vincent Gaffard, Yves Favry, Paul Wiet. Design of pipeline composite repairs : from lab scale tests to FEA and full scale testing. 10th International pipeline conference ; Volume 2: Pipeline integrity management, Sep 2014, Calgary, Canada. ⟨10.1115/IPC2014-33201⟩. ⟨hal-01113526⟩
  • Stéphane Pierret, Raul de Moura Pinho, André Pineau. Hold time effects on the crack growth behavior in Inco 718 alloy. 8th International symposium on superalloy 718 and derivatives, Sep 2014, Pittsburgh, United States. pp.537-551, ⟨10.1002/9781119016854.ch42⟩. ⟨hal-01113531⟩
  • Yoann y Guilhem, Jia Li, Henry Proudhon, Wolfgang Ludwig. Analysis of short fatigue crack propagation by 3D synchrotron imaging technique. International Conference on Fatigue Damage of Structural Materials X, Elsevier, Sep 2014, Hyannis, United States. ⟨hal-01113105⟩
  • M.C. Fivel, Jean-Loup Strudel, H.J. Chang. Initial stage of creep in Ni superalloys: a 3D discrete dislocation dynamics investigation. International Workshop on Modelling and Simulation of Superalloys, Sep 2014, Bochum, Germany. ⟨hal-01142240⟩
  • André Pineau. High temperature fatigue - a comprehensive review. Creep fatigue crack development symposium, Sep 2014, Dubendorf, Switzerland. 29 p. ⟨hal-01078625⟩
  • S. Feld-Payet, V. Chiaruttini, F. Feyel, Jacques Besson. A numerical approach to simulate ductile failure with mesh adaptivity within the finite strain framework. ECCOMAS 2014 - WCCM XI, Jul 2014, Barcelone, Spain. ⟨hal-01102141⟩
  • Thomas Maurer, Joseph Marae-Djouda, Guillaume Montay, Pierre-Michel Adam, Yazid Madi, et al.. Nanogauges for optical strain sensors. Nano2014, Jul 2014, Moscow, Russia. ⟨hal-02481810⟩
  • Victor Fabre, Sabine Cantournet, Noëlle Billon, Alain Thionnet. Characterization of bi-axial fatigue resistance of short glass fiber reinforced thermoplastic cruciform specimen. ICEM16 - International Conference on Experimental Mechanics, Jul 2014, Cambridge, United Kingdom. ⟨hal-01113525⟩
  • Nicolas Ranc, Antoine Blanche, David Ryckelynck, André Chrysochoos. Preprocessing of temperature measurement by IR techniques using POD truncated basis for heat source estimation. QIRT 2014, Jul 2014, Bordeaux, France. ⟨10.21611/qirt.2014.116⟩. ⟨hal-02057288⟩
  • Fabien Bernachy-Barbe, Lionel Gélébart, Jérôme Crépin, Michel Bornert. DIC analysis of SiC/SiC composite damage mechanisms at the tow scale. 16th International conference on experimental mechanics, Jul 2014, Cambridge, United Kingdom. ⟨hal-01139913⟩
  • Joseph Marae-Djouda, Arthur Gontier, Yazid Madi, Pierre-Michel Adam, Guillaume Montay, et al.. Organization of gold nanoparticles via copolymer templates. 5th International Conference on Advanced Nanomaterials, Jul 2014, Aveiro, Portugal. ⟨hal-02481803⟩
  • Antoine Andrieu, André Pineau, Pierre Joly, François Roch, David Ryckelynck. Influence of P and C intergranular segregation during manufacturing and ageing on the fracture toughness of nuclear pressure vessel steels. 20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.655-660, ⟨10.1016/j.mspro.2014.06.108⟩. ⟨hal-01053644⟩
  • Lucien Laiarinandrasana, Clémence Devilliers, E. Gaudichet-Maurin, Jean Michel Brossard, Jean Marc Lucatelli. Fracture mechanics of creeping solids applied to pre-cracked NOL ring specimens to predict residual lifetime of high density polyethylene pipes. 20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.1418-1422, ⟨10.1016/j.mspro.2014.06.229⟩. ⟨hal-01053654⟩
  • Vincent Macdonald, David Le Boulch, Arthur Hellouin de Menibus, Jacques Besson, Quentin Auzoux, et al.. Fracture of Zircaloy-4 fuel cladding tubes with hydride blisters. 20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.233-238, ⟨10.1016/j.mspro.2014.06.041⟩. ⟨hal-01053640⟩
  • Franck Tankoua, Jérôme Crépin, Philippe Thibaux, Steven Cooreman, Anne-Françoise Gourgues-Lorenzon. Quantitative investigation of brittle out-of-plane fracture in X70 pipeline steel. 20th European conference on fracture (ECF 20), Jun 2014, Trondheim, Norway. pp.1149-1154, ⟨10.1016/j.mspro.2014.06.187⟩. ⟨hal-01053645⟩
  • Henry Proudhon, Jia Li, Yoann y Guilhem, Péter Reischig, Arjen Roos, et al.. Polycrystalline FE Modeling of Deformation and Fatigue Cracking Using Experimental 3D Microstructures. 2nd International Congress on 3D Materials Science (3DMS 2014), Jun 2014, Annecy, France. ⟨hal-01580032⟩
  • Wolfgang Ludwig, Andrew King, Péter Reischig, Laura Nervo, Nicola Viganò, et al.. 3D Mapping of Polycrystalline Materials by X-ray Diffraction Imaging Techniques. 2nd International Congress on 3D Materials Science (3DMS 2014), Jun 2014, Annecy, France. ⟨hal-01580031⟩
  • Henri-Alexandre Cayzac, Sébastien Joannès, Lucien Laiarinandrasana. Diametral compression tests of a pultruded PA6 reinforced glass fibre composite: A macro and micro transverse damage kinetic investigation. ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain. ⟨hal-02062053⟩
  • Alain Thionnet, Lucien Laiarinandrasana, W. Trabelsi. Avalanche failure of yarns in 3D woven composite: Finite element multi-scale modelling based on tomography inspection. 16th european conference on composite materials, Jun 2014, Seville (Spain), Spain. ⟨hal-03999555⟩
  • Adrien Lebrun, Sébastien Joannès, Jacques Renard. Analytical and numerical methods to access the mechanical elastic properties of a deformed woven reinforced composite material. ECCM 16 - 16th European Conference on Composite Materials, Jun 2014, Seville, Spain. ⟨hal-02062062⟩
  • Erembert Nizery, Jean-Yves Buffiere, Henry Proudhon, Armelle Daniélou, Samuel Forest. Influence of particles on short fatigue crack initiation in 2050-T8 and 7050-T74. Aluminium Alloys 2014 - ICAA14, Jun 2014, Trondheim, Norway. pp.1067-1073, ⟨10.4028/www.scientific.net/MSF.794-796.296⟩. ⟨hal-01305626⟩
  • Erembert Nizery, Jean-Yves Buffiere, Henry Proudhon, Armelle Danielou, Samuel Forest. Influence of intermetallic particles on shot fatigue crack initiation in AA2050-T8 and AA7050-T7451. FDMD II - JIP 2014 - Fatigue design & material defects, Jun 2014, Paris, France. pp.07003, ⟨10.1051/matecconf/20141207003⟩. ⟨hal-01814317⟩
  • Guillaume Burgaud, Remi Batisse, Stéphane Hertz-Clemens, Georges Cailletaud, Yazid Madi, et al.. In‐service life estimation of damaged gas pipelines : Full‐scale experiments and finite element analyses. FDMD II - JIP 2014 - Fatigue Design & Material Defects , Jun 2014, Paris, France. 06007, 3 p., ⟨10.1051/matecconf/20141206007⟩. ⟨hal-01669976⟩
  • Yoann Guilhem, Stéphanie Basseville, Henry Proudhon, Georges Cailletaud. Effects of surface roughness on plastic strain localization in polycrystalline aggregates. FDMD II - JIP 2014 - Fatigue design & material defects, SF2M ; ENSAM, Jun 2014, Paris, France. 3 p., ⟨10.1051/matecconf/20141206009⟩. ⟨hal-01113183⟩
  • Samuel Jules, Yves Bienvenu, David Ryckelynck, Cecilie Duhamel, Jean-François Bisson, et al.. Micro-mechanical characterization of lead-free solder joints in power electronics. 2014 IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm), May 2014, Orlando, United States. pp.107-111, ⟨10.1109/ITHERM.2014.6892271⟩. ⟨hal-01075126⟩
  • Victor Fabre, Grégoire Quandalle, Sabine Cantournet, Noëlle Billon. Time-Temperature-Water Content equivalence on dynamic mechanical response of Polyamide 6,6. The 9th International Conference on the Mechanics of Time Dependent Materials, May 2014, Montreal, Canada. ⟨hal-01112802⟩
  • Francesco Delloro, Matthieu Faessel, Henry Proudhon, Dominique Jeulin, Michel Jeandin, et al.. A morphological approach to the modeling of the cold spray process. ITSC 2014, May 2014, Barcelone, Spain. pp.221-226. ⟨hal-01055132⟩
  • Caroline Guinard, Vincent Guipont, Michel Jeandin, Guillaume Montay, J. Girardot, et al.. Study of the residual stress distribution of thermally sprayed TBCs involving various interfaces and laser drilling. ITSC 2014, May 2014, Barcelone, Spain. pp.500-505. ⟨hal-01055135⟩
  • Yassine Zeralli, Gilles Rolland, Michel Jeandin, Christine Bourda, F. Rambaud. Novel in-situ gradient heat treatment during cold spray. ITSC 2014, May 2014, Barcelone, Spain. pp.923-928. ⟨hal-01055137⟩
  • Quentin Blochet, Francesco Delloro, Franck N'Guyen, François Borit, Michel Jeandin, et al.. Influence of spray angle on cold spray with Al for the repair of aircraft components. ITSC 2014, May 2014, Barcelone, Spain. pp.69-74. ⟨hal-01055104⟩
  • Francesco Delloro, Matthieu Faessel, Henry Proudhon, Dominique Jeulin, Michel Jeandin, et al.. X-ray micro-tomography and modeling of cold sprayed coated powders. ITSC 2014, May 2014, Barcelone, Spain. pp.886-891. ⟨hal-01055136⟩
  • Didier Locq, Loic Nazé, Jean-Michel Franchet, Pierre Caron, Alice Dumont, et al.. Metallurgical optimisation of PM superalloy N19. Eurosuperalloys 2014, May 2014, Giens, France. 6 p. ⟨hal-01064956⟩
  • Loic Nazé, M.C. Fivel, Jean-Loup Strudel. Mechanisms of plasticity in Ni base superalloys. Eurosuperalloys 2014, May 2014, Giens, France. ⟨hal-01142242⟩
  • Henri-Alexandre Cayzac, Sébastien Joannès, Lucien Laiarinandrasana. Fissuration par compression transverse d’un matériau composite à matrice thermoplastique pultrudé. DEPOS 25 - 25ème congrès sur la déformation des polymères solides, Mar 2014, Presqu'île de Giens, France. ⟨hal-02073808⟩
  • Raphael Maestracci, Nicole Fabregue, Michel Jeandin, Gaetan Bouvard, Maha Messaadi, et al.. Study of damage mechanisms in cold-sprayed 316L-matrix composite coatings using novel impact-sliding testing. THERMEC 2013 Supplement, Dec 2013, Las Vegas, United States. pp.452-462, ⟨10.4028/www.scientific.net/AMR.922.452⟩. ⟨hal-00998837⟩
  • Ekkarin Phongphinittana, Pongsak Nimdum, Sébastien Joannès, Jacques Renard, Vladimir Gantchenko. New experimental techniques and several micromechanical models for assessing the out-of-plan shear modulus properties of short glass fibre reinforced polyamide. JESCM13 - 13th Euro-Japanese Symposium on Composite Materials, Nov 2013, Bouguenais (Nantes), France. ⟨hal-02499388⟩
  • Raphaël Chosson, V. Vandenberghe, Anne-Françoise Gourgues-Lorenzon, Jérôme Crépin, J.-C. Brachet, et al.. Creep behavior at high temperature of the oxygen stabilized zirconium alpha phase of fuel cladding tubes oxidized in loca conditions. LWR Fuel Performance Meeting / Top Fuel 2013, Sep 2013, Charlotte, United States. pp.520-527. ⟨hal-01427453⟩
  • Jérôme Rossignol, Alain Thionnet. Damage in composite material : A microwave detection. Materials and Applications for Sensors and Transducers III, Sep 2013, Prague, Czech Republic. pp.303-305, ⟨10.4028/www.scientific.net/KEM.605.303⟩. ⟨hal-00987806⟩
  • Damien Colas, E. Finot, Sylvain Flouriot, Samuel Forest, Fréderic Herbst, et al.. Strain field measurements in polycrystalline tantalum. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00941048⟩
  • Alexandre Iltchev, V. Marcadon, Serge Kruch, Bertrand Langrand, Samuel Forest. Homogénéisation périodique d'un matériau élasto-plastique compressible anisotrope : application aux structures sandwichs à coeur cellulaire. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00941013⟩
  • Stéphanie Basseville, Yoann Guilhem, Henry Proudhon, T. Ghidossi, Loïc Signor, et al.. Etude numérique des champs mécaniques locaux dans les agrégats polycristallins sous chargements cycliques. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00941287⟩
  • Vladislav Yastrebov, Guillaume Anciaux, Georges Cailletaud, Jean-François Molinari. Contact élastique entre des surfaces rugueuses représentatives. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00941273⟩
  • David Ryckelynck. Estimation d'erreur d'hyper-réduction de problèmes élastoviscoplastiques. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00941305⟩
  • Yoann Guilhem, Stéphanie Basseville, Henry Proudhon, Georges Cailletaud. Influence de la rugosité de surface sur les champs mécaniques locaux dans les agrégats polycristallins. 21ème Congrès Français de Mécanique (CFM2013), Aug 2013, Bordeaux, France. pp.a_M7T7GKFG. ⟨hal-01018023⟩
  • Franck Tankoua, Jérôme Crépin, P. Thibaux, M. Arafin, S. Cooreman, et al.. Delamination of pipeline steels : determination of an anisotropic cleavage criterion. 21ème Congrès Français de Mécanique, CFM 2013, Aug 2013, Bordeaux, France. 6 p. ⟨hal-00938363⟩
  • Morgane Le Millier, Olivier Calonne, Jérôme Crépin, Cecilie Duhamel, Lionel Fournier, et al.. Influence of strain localization on IASCC of proton irradiated 304L stainless steel in simulated PWR primary water. 6th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2013, Asheville, United States. 16 p. ⟨hal-00999080⟩
  • Cecilie Duhamel, Alain Barbu, Jérôme Crépin, Brigitte Décamps, L. Fournier, et al.. Influence of dual beam nickel and helium irradiation on the microstructure of a 304L austenitic stainless steel. 6th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2013, Asheville, United States. 15 p. ⟨hal-00999028⟩
  • Elizabeth Chaumun, Jérôme Crépin, Ian De Curières, Cecilie Duhamel, Catherine Guerre, et al.. Initiation of SCC crack in nickel based weld metals : influence of microstructure features. 6th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2013, Asheville, United States. 18 p. ⟨hal-00998995⟩
  • Pauline Huguenin, Jérôme Crépin, Cecilie Duhamel, Henry Proudhon, François Vaillant. Initiation of stress corrosion cracking in pre-strained austenitic stainless steels exposed to primary water. 6th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2013, Asheville, United States. 20 p. ⟨hal-00999009⟩
  • Thierry Couvant, Mickael Wehbi, Cecilie Duhamel, Jérôme Crépin. Initiation of PWSCC of weld alloy 182. 6th international conference on environmental degradation of materials in nuclear power systems - water reactors, Aug 2013, Asheville, United States. 7 p. ⟨hal-00999016⟩
  • Lucien Laiarinandrasana, Wassim Trabelsi, Alain Thionnet. Finite element multi-scale modeling of the failure mechanisms in a 3D woven composite. 19th International conference on composite materials, Jul 2013, Montreal, Canada. pp.4165-4169. ⟨hal-00868623⟩
  • Rim Ben Toumi, Jacques Renard, M. Monin, Pongsak Nimdum. Fatigue and static damage modelling of continuous glass fibre/epoxy composite. 19th International conference on composite materials, Jul 2013, Montreal, Canada. pp.5198-5202. ⟨hal-00868645⟩
  • Henri-Alexandre Cayzac, Lucien Laiarinandrasana, Sébastien Joannès. Experimental and numeric multiscale analyses of failure mechanisms on pultruded polymeric composite material. ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.6287-6291. ⟨hal-00868680⟩
  • H.Y. Chou, Anthony R. Bunsell, Alain Thionnet, Sébastien Joannès. Analytical and finite element analyses on reliability of carbon fibre reinforced plastics. ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.5142-5150. ⟨hal-00868632⟩
  • Clémence Devilliers, Anthony R. Bunsell, Alain Thionnet, H.Y. Chou, Sébastien Joannès. Proof testing and lifetime reliability of carbon fibre reinforced composite pressure vessels. ICCM 19 - 19th International Conference on Composite Materials, Jul 2013, Montreal, Canada. pp.6038-6045. ⟨hal-00868659⟩
  • M.C. Fivel, Jean-Loup Strudel, H.J. Chang. Initial stage of creep in Ni superalloys: a 3D discrete dislocation dynamics investigation. U.S. National Congress on Computational Mechanics (IUSNCCM12), Jul 2013, Raleigh United States. ⟨hal-01142247⟩
  • Mickaël Wehbi, Jérôme Crépin, Thierry Couvant, Cécilie Duhamel. Initiation of PWSCC in Nickel Base Alloy 182. ASME 2013 Pressure Vessels and Piping Conference, Jul 2013, Paris, France. ⟨10.1115/PVP2013-97703⟩. ⟨hal-04487033⟩
  • Judith Wollbrett-Blitz, Alba Marcellan, Sébastien Joannès. Longitudinal and Transverse properties and molecular motions in single aramid fibers. 34APS - 34th Australasian Polymer Symposium, Jul 2013, Darwin, Convention Centre, Australia. ⟨hal-02061483⟩
  • Victor De Rancourt, Samuel Forest, Esteban P. Busso, Benoit Appolaire, Kais Ammar. Modélisation de l'oxydation par la méthode des champs de phases. Recueil des journées jeunes chercheurs 2013, Jun 2013, La Rochelle, France. pp.129-134. ⟨hal-00868590⟩
  • Mickael Wehbi, Thierry Couvant, Jérôme Crépin, Cecilie Duhamel. Amorçage de la corrosion sous contrainte (CSC) en milieu primiaire des réacteurs à eau sous pression (REP) dans les soudures en alliages base nickel 182. Recueil des journées jeunes chercheurs 2013, Jun 2013, La Rochelle, France. pp.155-159. ⟨hal-00868602⟩
  • Elizabeth Chaumun, Catherine Guerre, Eva Héripré, Mohamed Sennour, Jérôme Crépin, et al.. Etude de l'amorçage en corrosion sous contrainte d'alliages à base de nickel soudés : influence des paramètres microstructuraux. Recueil des journées jeunes chercheurs 2013, Jun 2013, La Rochelle, France. pp.29-33. ⟨hal-00868552⟩
  • Arina Marchenko, Samuel Forest, Matthieu Mazière. La modélisation du vieillissement statique et dynamique dans le titane polycristallin non allié. Recueil des journées jeunes chercheurs 2013, Jun 2013, La Rochelle, France. pp.107-108. ⟨hal-00868559⟩
  • André Pineau, Raul de Moura Pinho, Stéphane Pierret, Caroline Mary. A local approach to creep-fatigue-oxidation interactions in Inco 718 alloy. 13th international conference on fracture, Jun 2013, Beijing, China. 11 p. ⟨hal-00853420⟩
  • Lucien Laiarinandrasana, Yannick Nziakou, Jean Louis Halary. Ductile to brittle transition concept on fracture behavior of poly(vinylidene fluoride) / poly(methyl methacrylate) blends. 13th international conference on fracture, Jun 2013, Beijing, China. 8 p. ⟨hal-00853452⟩
  • Meriem Abikchi, Thomas Billot, Jérôme Crépin, Arnaud Longuet, Caroline Mary, et al.. Fatigue life and initiation mechanisms in wrought Inconel 718 DA for different microstructures. 13th international conference on fracture, Jun 2013, Beijing, China. 11 p. ⟨hal-00853448⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne Denquin, Anne-Françoise Gourgues-Lorenzon. Effect of welding defects on plastic behaviour and fatigue lifetime of friction stir welded Al-Cu-Li alloy. 13th international conference on fracture, Jun 2013, Beijing, China. 10 p. ⟨hal-00853558⟩
  • Mouhcine Kahziz, Thilo F. Morgeneyer, Matthieu Mazière, Lukas Helfen, Éric Maire, et al.. 3D synchrotron laminography assessment of damage evolution in blanked dual phase steels. 13th international conference on fracture, Jun 2013, Beijing, China. 8 p. ⟨hal-00853561⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, Emmanuel Lucas, Matthieu Mazière, André Pineau. Local approach applied to the fracture toughness of resistance spot welds. 13th international conference on fracture, Jun 2013, Beijing, China. 10 p. ⟨hal-00853411⟩
  • Lucien Laiarinandrasana, Thilo F. Morgeneyer, Henry Proudhon, Lukas Helfen, Jacques Besson. Local approach of fracture on semi-crystalline polymers : contribution of X-ray laminography technique. 13th international conference on fracture, Jun 2013, Beijing, China. 11 p. ⟨hal-00853439⟩
  • Antoine Andrieu, André Pineau, Pierre Joly, François Roch. On modeling of thermal embrittlement in PWR steels using the local approach to fracture. 13th international conference on fracture, Jun 2013, Beijing, China. 10 p. ⟨hal-00853417⟩
  • H.Y. Chou, Anthony R. Bunsell, A. Mouritz, Alain Thionnet. Arguments pour expliquer la dispersion expérimentale sur le nombre de ruptures de fibres au sein d'un composite obtenue par Emission Acoustique. JNC 18, Jun 2013, Nantes, France. 10 p. ⟨hal-00841470⟩
  • H.Y. Chou, Anthony R. Bunsell, Alain Thionnet. Indicateur visuel de l'état de fin de vie d'un réservoir composite. JNC 18, Jun 2013, Nantes, France. 10 p. ⟨hal-00841471⟩
  • Camille Chateau, Lionel Gélébart, Michel Bornert, Jérôme Crépin. Modeling of damage in unidirectional SiC/SiC composites and multi-scale experimental validation. The Third International Conference on Computational Modeling of Fracture and Failure of Materials and Structures (CFRAC), Jun 2013, Prague, Czech Republic. ⟨hal-00832095⟩
  • Olivier Ther, Christophe Colin, Laurent Gerbaud, Alfazazi Dourfaye. Effect of gradation by reactive imbibition on commercial WC-Co drilling tools used in oil and gas industries. 18th Plansee seminar, Jun 2013, Reutte, Austria. 14 p. ⟨hal-00856149⟩
  • Judith Wollbrett-Blitz, Alba Marcellan, Sébastien Joannès. Structure/Property Relationships of a Single Para-aramid Fibre. Fiber Society's Spring 2013 Conference, The Fiber Society, May 2013, Greelong, Australia. ⟨hal-02061473⟩
  • Mickaël Abbas, Quang Anh Ta, David Ryckelynck. Implémentation de la méthode d'Hyper-Réduction de modèle dans Code Aster et analyses paramétriques. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 8 p. ⟨hal-00868452⟩
  • Fabien Bernachy-Barbe, Lionel Gélébart, Jérôme Crépin, Michel Bornert. Caractérisation et modélisation du comportement mécanique de matériaux composites SiC/SiC. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 7 p. ⟨hal-00856216⟩
  • Vladislav Yastrebov, Georges Cailletaud, Frédéric Feyel. Couplage de codes éléments finis et dynamique discrète de dislocations. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 2 p. ⟨hal-00868419⟩
  • Yoann Guilhem, Stéphanie Basseville, Francois Curtit, Jean-Michel Stephan, Georges Cailletaud. Champs locaux, effets de joints de grains et de surface dans les agrégats polycristallins 3D. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 8 p. ⟨hal-00868423⟩
  • Victor De Rancourt, Kais Ammar, Benoît Appolaire, Esteban P. Busso, Samuel Forest. Modelling stress-diffusion controlled phase transformations : application to stress corrosion cracking. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 8 p. ⟨hal-00868440⟩
  • Georges Peyre, David Ryckelynck, Frédéric Feyel, Serge Kruch. Vers une méthode FE2-APHR. CSMA 2013 - 11ème colloque national en calcul des structures, May 2013, Giens, France. 8 p. ⟨hal-00856227⟩
  • Georges Cailletaud, Benoît Appolaire, Jonathan Cormier. Précipitation dans les structures. 11ème Colloque National en Calcul des Structures, May 2013, Giens, France. ⟨hal-01058603⟩
  • Yoann Guilhem, Wolfgang Ludwig, Henry Proudhon, Jia Li. Synchrotron imaging characterization and numerical simulation of short fatigue crack propagation in polycrystals. TMS 2013 Conference, Mar 2013, San Antonio, United States. ⟨hal-01579913⟩
  • Henry Proudhon, Jia Li, Yoann Guilhem, Lucien Laiarinandrasana, Thilo F. Morgeneyer, et al.. Combining X-ray microtomography with the finite elements method to study damage and cracking in structural materials. TMS 2013 - 142nd annual meeting & exhibition, Mar 2013, San Antonio, Texas, United States. pp.1165-1173, ⟨10.1002/9781118663547.ch142⟩. ⟨hal-00874745⟩
  • Olivier Ther, Christophe Colin, Marie-Hélène Berger, Laurent Gerbaud, Alfazazi Dourfaye. Reactive imbibition of WC-Co substrate for PDC cutters used in oil and gas and mining drilling. 2012 Powder Metallurgy World Congress & Exhibition, Oct 2012, Yokohama, Japan. 8 p. ⟨hal-00795650⟩
  • Caroline Guinard, Vincent Guipont, Michel Jeandin, Thilo F. Morgeneyer, Henry Proudhon, et al.. Analyse non destructive des défauts engendrés par le perçage laser des barrières thermiques. LASERAP'7, Oct 2012, Ile d'Oléron, France. pp.288-293. ⟨hal-00751784⟩
  • Guylaine Boittin, D. Locq, A. Rafray, P. Caron, Pascale Kanoute, et al.. Influence of y' precipitate-size and distribution on LCF behavior of a PM disk superalloy. Superalloys 2012 ; 12th international symposium on superalloys, Sep 2012, Seven Springs, United States. pp.167-176. ⟨hal-00743347⟩
  • Arthur Hellouin de Menibus, Quentin Auzoux, Ousmane Dieye, Vincent Macdonald, Jacques Besson, et al.. Hydride blisters formation, characterization and effect on the fracture of Zircaloy-4 cladding tubes under reactivity initiated accident conditions. 21st International conference Nuclear Energy for New Europe, Sep 2012, Ljubljana, Slovenia. ⟨hal-01057285⟩
  • Georges Cailletaud, Stéphanie Basseville, Julian Durand, Frédéric Feyel, Henry Proudhon, et al.. The mechanics of materials in contact problems. 19th European conference on fracture- ECF 19, Aug 2012, Kazan, Russia. 10 p. ⟨hal-00765455⟩
  • Anne Laure Rouffié, Benjamin Fournier, P. Wident, L. Ziolek, F. Delabrouille, et al.. Influence of the microstructure on the fracture mechanisms of ODS ferritic steels. 19th European conference on fracture, Aug 2012, Kazan, Russia. 8 p. ⟨hal-00765188⟩
  • Pongsak Nimdum, Jacques Renard. Use of acoustic emission to dicriminate damage modes in composite-antenna-structure during buckling loading. 15th International conference on experimental mechanics, Jul 2012, Porto, Portugal. 15 p., paper 2778. ⟨hal-01109545⟩
  • Yoann Guilhem, Jean-Michel Stephan, Francois Curtit, Georges Cailletaud, Stéphanie Basseville. Numerical Study of the Short Crack Initiation in Polycrystalline Aggregates. Pressure Vessels & Piping Conference, Jul 2012, Toronto, Canada. ⟨10.1115/PVP2012-78164⟩. ⟨hal-01580033⟩
  • K. Kuzmenkov, Farida Azzouz, Georges Cailletaud. Full field multimécanique scale simulation of the local behaviour and failure accounting for dwell effect in Ti alloys. 8th European Solid Mechanics conference, Jul 2012, Graz, Austria. ⟨hal-04085904⟩
  • Julian Durand, Henry Proudhon, Georges Cailletaud. Contact between rough surfaces : crystal plasticity influence on the contact tightness estimation. 10th world congress on computational mechanics, Jul 2012, Sao Paulo, Brazil. 12 p. ⟨hal-00765155⟩
  • David Ryckelynck. Multidimensional hyper-reduction of large mechanical models involving internal variables. ASME 2012 - 11th Biennial conference on engineering systems design and analysis, Jul 2012, Nantes, France. 8 p. ⟨hal-00732247⟩
  • Pongsak Nimdum, Jacques Renard. Use of acoustic emission to discriminate damage modes in carbon fibre reinforced epoxy laminate during tensile and buckling loading. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venise, Italy. 8 p. ⟨hal-01109533⟩
  • Mamadou Abdoul Mbacke, Jacques Renard, Alain Thionnet, Sébastien Joannès. Predicting mechanical behaviour and damage kinetics of a 3D interlock composite materials by using a multiscale approach. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. ⟨hal-01109412⟩
  • Georges Kamgaing Somoh, Pongsak Nimdum, Jacques Renard. Study of delamination of fibre harness satin weave composites molded by hot pressing. The example of high strength carbon fiber and PEEK matrix. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venise, Italy. 8 p. ⟨hal-01109506⟩
  • Maxime Bertin, Damien Halm, B. Magneville, Jacques Renard, Philippe Saffré, et al.. One year OSIRHYS IV project synthesis: mechanical behaviour of 700 bar type iv high pressure vessel code qualification.. 15th European conference on composite materials, Jun 2012, Venise, Italy. 8 p. ⟨hal-00801409⟩
  • Sébastien Joannès. Continuous fibre reinforced thermoplastic joining, a laser-welded seam multi-axial mechanical characterization and modelling. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p. ⟨hal-01103937⟩
  • Henri-Alexandre Cayzac, Lucien Laiarinandrasana, Sébastien Joannès. Experimental investigation and finite element modelling of microstructural composite material. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p. ⟨hal-01103975⟩
  • Naruepon Eiamnipon, Pongsak Nimdum, Jacques Renard, C. Kolitawong. Low velocity impact responses and impact-induced damages on steel cord-rubber composite. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venise, Italy. 6 p. ⟨hal-01103971⟩
  • B. Patamaprohm, Pongsak Nimdum, Jacques Renard. Three-dimensional analysis using probabilistic multiscale approaches for predicting macroscopic mechanical behaviours and failure strength in unidirectional carbon fibre-reinforced epoxy composites. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venise, Italy. 7 p. ⟨hal-01109530⟩
  • Wassim Trabelsi, Lucien Laiarinandrasana, Alain Thionnet, Sébastien Joannès. Durability of a 3D woven composite assisted by finite element multi-scale modelling. ECCM 15 - 15th European Conference on Composite Materials, Jun 2012, Venice, Italy. 8 p. ⟨hal-01109487⟩
  • Tolga Tavsanoglu, Marie-Hélène Berger, Michel Jeandin, O. Addemir. Nanostructural investigation of boron carbide thin films grown by DC magnetron sputtering. Proceedings of the twenty sixth international conference on surface modification technologies, Jun 2012, Ecully, France. pp.183-189. ⟨hal-00815997⟩
  • Ala Zouaghi, Michel Bellet, Yves Bienvenu, Gilles Perrin, Denis Cédat, et al.. Modelling of the compaction phase during Hot Isostatic Pressing process at the mesoscopic scale. Advances in Powder Metallurgy and Particulate Materials - 2012, Jun 2012, Nashville, United States. pp.3117-3125 - ISBN 978-0-9853-3972-2. ⟨hal-00933205⟩
  • Alice Dumont, Loic Nazé, Alain Köster, Luc Rémy, Jean Yves Guedou, et al.. Investigation of heat treatment parameters effect on the microstructure and on the mechanical properties of a powder metallurgy nickel-base superalloy. 21st international conference on metallurgy and materials, May 2012, Brno, Czech Republic. 6 p. ⟨hal-00732325⟩
  • Olivier Amsellem, F. Pauchet, Michel Jeandin, Vincent Guipont. Interconnected porosity modification of plasma sprayed alumina coating using excimer laser surface treatment. Thermal spray 2012, May 2012, Houston, United States. pp.521-527. ⟨hal-00714767⟩
  • Yassine Zeralli, Henry Proudhon, Franck N'Guyen, Michel Jeandin, Nicolas Lenoir, et al.. Advanced image processing of Ag-based composite powders for the modeling of the cold spray process. Thermal spray 2012, May 2012, Houston, United States. pp.259-264. ⟨hal-00714469⟩
  • Damien Giraud, François Borit, Vincent Guipont, Michel Jeandin, J.M. Malhaire. Metallization of a polymer using cold spray : application to aluminum coating of polyamide 66. Thermal spray 2012, May 2012, Houston, United States. pp.265-270. ⟨hal-00714440⟩
  • Caroline Guinard, Vincent Guipont, Henry Proudhon, Michel Jeandin, J. Girardot, et al.. Study of delamination induced by laser drilling of thermally sprayed TBC interfaces. Thermal spray 2012, May 2012, Houston, United States. pp.114-119. ⟨hal-00714459⟩
  • Marion Chieux, Cecilie Duhamel, Régine Molins, François Jomard, Luc Rémy, et al.. Sulfur localization in NiPtAl/superalloy systems after high temperature isothermal oxidation. HTCPM'8 - 8th international symposium on high-temperature corrosion and protection of materials, May 2012, Les Embiez, France. 8 p. ⟨hal-00723169⟩
  • Pierre Sallot, Vincent Maurel, Luc Rémy, Mark Harvey. Microstructure evolution of NiAlPt coatings under thermo-mechanical loading conditions. HTCPM'8 - 8th international symposium on high-temperature corrosion and protection of materials, May 2012, Les Embiez, France. 8 p. ⟨hal-00723167⟩
  • Grégory Fabre, Michel Jeandin, Vincent Guipont, Françoise Passilly, François Lepoutre, et al.. Assessment of interfacial crack in EB-PVD thermal barrier coating combining laser shock adhesion test (LASAT) and photoluminescence piezospectroscopy. HTCPM'8 - 8th international symposium on high-temperature corrosion and protection of materials, May 2012, Les Embiez, France. 9 p. ⟨hal-00723175⟩
  • Marion Chieux, Cecilie Duhamel, Régine Molins, Luc Rémy, Jean Yves Guedou. Effect of the superalloy composition on the isothermal oxidation behaviour of TBC systems. HTCPM'8 - 8th international symposium on high-temperature corrosion and protection of materials, May 2012, Les Embiez, France. 9 p. ⟨hal-00723171⟩
  • Gilles Rolland, Yassine Zeralli, Vincent Guipont, Michel Jeandin, S. Hardy, et al.. Lifetime of cold-sprayed electrical contacts. 26th international conference on electrical contacts - ICEC 2012, May 2012, Beijing, China. pp.338-345, ⟨10.1049/cp.2012.0672⟩. ⟨hal-00853678⟩
  • Stéphanie Basseville, Georges Cailletaud. Modélisation de l'usure en plasticité sous chargement de fretting : compétition entre usure et fissuration. 24èmes journées internationales francophones de tribologie, May 2012, Aix en Provence, France. pp.3-12. ⟨hal-00820166⟩
  • E. Cini, E. Desdoit, Aurélien Villani, Jacques Besson. Modeling creep behaviour of boiler grade steels - Application to grade 92 steel. 6th International Conference on Creep, Fatigue and Creep-Fatigue Interaction, Jan 2012, Mamallapuram, India. pp.735-741, ⟨10.1016/j.proeng.2013.03.323⟩. ⟨hal-00821934⟩
  • Ibrahim Kalouche, Jérôme Crépin, Eva Héripré, Graciela Bertolino, Geneviève Guillot, et al.. Modélisation 3D par éléments finis des propriétés mécaniques de la glène scapulaire.. Congrès de la Société Française de Chirurgie Orthopédique et Traumatologique, Nov 2011, France. ⟨hal-00644995⟩
  • J. Ghighi, J. Cormier, E. Ostoja-Kuczynski, J. Mendez, G. Cailletaud, et al.. Creep behaviour modelling of Ni-based single crystal superalloys under complex thermomechanical loading paths. 2nd International Conference on Material Modeling, ICMM2, Aug 2011, Paris, France. ⟨hal-04085911⟩
  • Arthur Hellouin de Menibus, Jacques Besson, Jérôme Crépin, Sébastien Carassou. Plastic deformation process and fracture of Zircaloy-4 PWR cladding samples tested under RIA loading conditions monitored with high speed optical and infrared cameras. 2nd International Conference on Material Modelling, Aug 2011, France. ⟨hal-01057293⟩
  • Ala Zouaghi, Michel Bellet, Yves Bienvenu, Gilles Perrin, Denis Cédat, et al.. Modélisation de la phase de compaction du procédé CIC à l'échelle mésoscopique. 20ème Congrès Français de Mécanique, CFM 2011, Aug 2011, Besançon, France. 6 p. ⟨hal-00678252⟩
  • Olivier Bouaziz. Potentiel des matériaux à gradient de propriétés pour applications nucléaires. 20ème Congrès Français de Mécanique, CFM 2011, Aug 2011, Besançon, France. 6 p. ⟨hal-00684977⟩
  • Matthieu Mazière, Samuel Forest. Le calcul de structures en présence de vieillissement statique ou/et dynamique d'alliages métalliques. 20ème Congrès Français de Mécanique, CFM 2011, Aug 2011, Besançon, France. 6 p. ⟨hal-00684968⟩
  • Antoine Andrieu, André Pineau, David Ryckelynck, Olivier Bouaziz. Extension of Beremin model to bi-modal brittle failure. 20ème Congrès Français de Mécanique, CFM 2011, Aug 2011, Besançon, France. 6 p. ⟨hal-00684693⟩
  • Pongsak Nimdum, Jacques Renard. A continuum damage model for composite laminated structures submitted to static and fatigue loadings. 18th international conference of composite materials, Aug 2011, Jeju, South Korea. 6 p. ⟨hal-00662210⟩
  • C. Thomas, Fabien Nony, Stéphane Villalonga, Jacques Renard. Damage in thermoplastic composite structures : application to high pressure hydrogen storage vessels. 18th international conference of composite materials, Aug 2011, Jeju, South Korea. 6 p. ⟨hal-00662242⟩
  • Anthony R. Bunsell, Alain Thionnet, H.Y. Chou. Determination of intrinsic scatter in lifetimes of carbon fibre epoxy pressure vessels in view of defining fundamental safety factors. 18th international conference of composite materials, Aug 2011, Jeju, South Korea. 6 p. ⟨hal-00662209⟩
  • Pongsak Nimdum, Jacques Renard. Non local approach for prediction of delamination onset. 18th international conference of composite materials, Aug 2011, Jeju, South Korea. 6 p. ⟨hal-00662221⟩
  • Catherine Guerre, Pierre Laghoutaris, J. Chêne, Loic Marchetti, Régine Molins, et al.. Stress corrosion cracking of alloy 600 in PWR primary water : influence of chromium, hydrogen and oxygen diffusion. 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Aug 2011, Colorado springs, United States. pp.1477-1488. ⟨hal-00683119⟩
  • Morgane Le Millier, Olivier Calonne, Jérôme Crépin, Cecilie Duhamel, Fabrice Gaslain, et al.. Irradiation assisted stress corrosion cracking of stainless steels in a PWR environment (A combined approach). 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Aug 2011, Colorado springs, United States. pp.1293-1307, ⟨10.1007/978-3-319-48760-1_79⟩. ⟨hal-00683115⟩
  • Catherine Guerre, Cecilie Duhamel, Mohamed Sennour, Jérôme Crépin, M. Le Calvar. SCC crack growth rate of alloy 82 in PWR primary water conditions - effect of a thermal treatment. 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems - Water Reactors, Aug 2011, Colorado springs, United States. pp.1127-1139. ⟨hal-00683121⟩
  • A. Arlazarov, M. Gouné, Olivier Bouaziz, A. Hazotte, F. Kegel. Effect of intercritical annealing time on microstructure and mechanical behavior of advanced medium Mn steels. Thermec 2011, Aug 2011, Quebec City, Canada. pp.2693-2698, ⟨10.4028/www.scientific.net/MSF.706-709.2693⟩. ⟨hal-00675692⟩
  • Morgane Le Millier, Olivier Calonne, Jérôme Crépin, Cecilie Duhamel, L. Fournier, et al.. Corrosion sous contrainte assistée par l'irradiation en milieu primaire d'un acier inoxydable austénitique. Journées jeunes chercheurs 2011, Jul 2011, Lyon, France. pp.97-102. ⟨hal-00639337⟩
  • Guilhem Bosc, Catherine Verdu, Nicolas Mary, Bernard Normand, Anne-Françoise Gourgues-Lorenzon, et al.. Mise en place d'un test de fatigue-corrosion des ressorts de suspension automobile. Journées jeunes chercheurs 2011, Jul 2011, Lyon, France. pp.139-143. ⟨hal-00639341⟩
  • Bogdan Chetroiu, Catherine Guerre, Cecilie Duhamel, Jérôme Crépin, Loic Marchetti, et al.. Mécanismes de la corrosion sous contrainte de l'alliage 600 en milieu primaire REP : mise au point de dépôt du chrome. Journées jeunes chercheurs 2011, Jul 2011, Lyon, France. pp.157-161. ⟨hal-00639345⟩
  • Henry Proudhon. Large scale finite element computations using real grain microstructures. Proceedings of the 1st World Congress on Integrated Computational Materials Engineering, Jul 2011, Seven Springs, United States. pp.99-105. ⟨hal-00662326⟩
  • Konstantin Kuzmenkov, Farida Azzouz, Nikolay Osipov, Georges Cailletaud. A size dependent crystal viscoplasticity FE model representing dwell effect for polycrystalline Ti6242. 12th Word Conference on Titanium, Jun 2011, BeiJing, China. ⟨hal-04085913⟩
  • Stéphane Villalonga, Martin Kempeneers, Philippe Saffré, Jacques Renard, Damien Halm, et al.. OSIRHYS IV Project, 700 bar on-board composite pressure vessel mechanical behaviour prediction with uncertainties knowledge. ASME 2011 Pressure Vessels and Piping Conference PVP2011, Jun 2011, Baltimore, Maryland, United States. 10 p. ⟨hal-00599214⟩
  • H.Y. Chou, Hasnae Zejli, Alain Thionnet, Anthony R. Bunsell, A. Mouritz, et al.. Détection et discrimination par émission acoustique des endommagements dans les composites. Comparaison expérience / modélisation. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.31. ⟨hal-00597895⟩
  • Maxime Bertin, Martin Kempeneers, David Leh, Pongsak Nimdum, Juan Pedro Berro Ramirez, et al.. OSIRHYS IV - Qualification des codes pour la prédiction du comportement mécanique des structures composites des réservoirs embarqués de stockage à 700 bars de l'hydrogène. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.137. ⟨hal-00598114⟩
  • Jérôme Rossignol, Marie-Laetitia Pastor, Alain Thionnet. Détection d'endommagement dans les composites à l'aide des micro-ondes. Comparaison avec la thermographie infrarouge. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.28. ⟨hal-00597892⟩
  • Alain Thionnet, Anthony R. Bunsell, S. Camara, David H. Allen. Une méthode FE2 simplifiée appliquée à la modélisation de l'éclatement des réservoirs composites hautes pressions. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.72. ⟨hal-00597989⟩
  • A.E. Scott, I. Sinclair, S.M. Spearing, M. Mavrogordato, Anthony R. Bunsell, et al.. Rupture de fibre : comparaison entre un modèle écrit a l'échelle microstructural et une détection du phénomène par tomographie très haute résolution. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.27. ⟨hal-00597890⟩
  • Alain Thionnet. Pour une approche locale de la fatigue : proposition d'une conceptualisation et d'une classification des problèmes de fatigue. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.20. ⟨hal-00597884⟩
  • Cédric Thomas, Fabien Nony, Stéphane Villalonga, Jacques Renard. Endommagement de structures composites à matrice thermoplastique : application au stockage d'hydrogène gazeux sous haute pression. 17èmes Journées Nationales sur les Composites (JNC17), Jun 2011, Poitiers-Futuroscope, France. pp.86. ⟨hal-00598131⟩
  • Lucien Laiarinandrasana, Thilo F. Morgeneyer, Henry Proudhon. Multiaxial stress state assessed by 3D X-Ray tomography on semi crystalline. 2011 Annual Conference on Experimental and Applied Mechanics, Jun 2011, Uncasville, United States. 8 p. ⟨hal-00640085⟩
  • Thilo F. Morgeneyer, L. Helfen, I. Sinclair, F. Hild, Henry Proudhon, et al.. In-situ synchrotron-radiation computed laminography observation of ductile fracture. 2011 Annual Conference on Experimental and Applied Mechanics, Jun 2011, Uncasville, United States. 7 p. ⟨hal-00640128⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin, Christophe Colin. Homogenization of periodic auxetic materials. 11th International Conference on the Mechanical Behavior of Materials (ICM11), Jun 2011, Côme, Italy. pp.1847-1852, ⟨10.1016/j.proeng.2011.04.307⟩. ⟨hal-00607077⟩
  • Guillaume Martin, Loic Nazé, Georges Cailletaud. Numerical multi-scale simulations of the mechanical behavior of β-metastable titanium alloysTi5553 andTi 17. 11th International Conference on the Mechanical Behavior of Materials (ICM11), Jun 2011, Côme, Italy. pp.1803-1808, ⟨10.1016/j.proeng.2011.04.300⟩. ⟨hal-00619625⟩
  • M.F. Giordana, Pierre-François Giroux, Iris Alvarez-Armas, Maxime Sauzay, A. Armas. Micromechanical modeling of the cyclic softening of EUROFER 97 steel. 11th International Conference on the Mechanical Behavior of Materials (ICM11), Jun 2011, Côme, Italy. pp.1268-1273, ⟨10.1016/j.proeng.2011.04.211⟩. ⟨hal-00605907⟩
  • Jean-Louis Chaboche, Pascale Kanoute, Farida Azzouz. A robust cyclic elastoplastic constitutive framework for fatigue life analysis. Third international conference on heterogeneous material mechanics, May 2011, Shanghai, China. ⟨hal-04074978⟩
  • Julian Durand, Vladislav Yastrebov, Henry Proudhon, Georges Cailletaud. Finite element analysis of the contact between rough surfaces. Third international conference on heterogeneous material mechanics, May 2011, Shanghai, China. pp.47-54. ⟨hal-00661514⟩
  • Jean Louis Chaboche, Pascale Kanoute, Farida Azzouz. A robust cyclic elastoplastic constitutive framework for fatigue life analysis. Third international conference on heterogeneous material mechanics, May 2011, Shanghai, China. pp.853-856. ⟨hal-00661518⟩
  • Michael Fischlschweiger, Georges Cailletaud, Thomas Antretter, Eduard R. Oberaigner. A phenomenological mean field model for coupling phase transformation with plasticity. Third international conference on heterogeneous material mechanics, May 2011, Shanghai, China. pp.738-743. ⟨hal-00661516⟩
  • Aurélie Benoit, Habibou Maitournam, Luc Rémy, Frédéric Oger. Comportement asymptotique des structures soumises à des chargements thermo-mécaniques cycliques. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592936⟩
  • Djamel Missoum-Benziane, Vincent Chiaruttini, Jean-Didier Garaud, Frédéric Feyel, Ron Foerch, et al.. Z-set/ZeBuLoN : une suite logicielle pour la mécanique des matériaux et le calcul de structures. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592920⟩
  • Julian Durand, Vladislav Yastrebov, Henry Proudhon, Georges Cailletaud. Analyse du contact entre surfaces rugueuses par la méthode des éléments finis et par un nouveau modèle numérique. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592719⟩
  • Dominique Geoffroy, Vincent Chiaruttini, Jérôme Crépin, Eva Héripré, Arjen Roos. Mise en place d'un modèle de zone cohésive à base physique dans un bicristal de gamma-TiAl. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592923⟩
  • Anaïs Gaubert, Hyung Jun Chang, Samuel Forest. Modélisation des effets d échelle en plasticité cristalline : comparaison entre la mécanique des milieux continus généralisés et la dynamique des dislocations. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ; Clé USB. ⟨hal-00592927⟩
  • Sam Cuvilliez, Frédéric Feyel, Eric Lorentz, Sylvie Michel-Ponnelle. Transition endommagent non local - fissuration dans le cadre de la rupture quasi-fragile. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592778⟩
  • Vivien Courtier, David Ryckelynck, Andrei Constantinescu. Désynchronisation partielle de la méthode APHR. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ; Clé USB. ⟨hal-00592880⟩
  • Henry Proudhon, Michael Herbig, P. Reischig, Jean-Yves Buffiere, Wolfgang Ludwig. Simulation par éléments finis de la déformation de polycristaux à partir d'images de tomographie par contraste de diffraction. 10e colloque national en calcul des structures, May 2011, Giens, France. 7 p. ⟨hal-00592918⟩
  • Vladislav Yastrebov, Georges Cailletaud, Frédéric Feyel. Enrichment of the contact geometry within the finite element method. 10e colloque national en calcul des structures, May 2011, Giens, France. 8 p. ⟨hal-00592720⟩
  • Arthur Hellouin de Menibus, Jacques Besson, Jérôme Crépin, Sébastien Carassou. Mesures de champs de déformations et d'échauffements de gaines en Zircaloy-4 sollicitées en conditions représentatives d'un accident d'excursion de réactivité. Colloque Plasticité 2011, Apr 2011, France. ⟨hal-01057288⟩
  • Michael Fischlschweiger, Eduard R. Oberaigner, Thomas Antretter, Georges Cailletaud. A multi-block-spin approach for martensitic phase transformation based on statistical physics. Behavior and mechanics of multifunctional materials and composites, Mar 2011, San Diego, United States. 8 p., ⟨10.1117/12.881960⟩. ⟨hal-01292295⟩
  • Mathilde Ouattara-Brigaudet, Sandrine Berthon-Fabry, Christian Beauger, Marian Chatenet, Mohamed Sennour, et al.. Comparison of platinum deposit methods on carbon aerogels used in Proton Exchange. Membrane Fuel Cells (PEMFC). Fundamentals & Developments of Fuel Cells (FDFC) 2011 Conference, Jan 2011, Grenoble, France. 2 p. - - ISBN 978-2-7466-2972-7. ⟨hal-00800935⟩
  • Jérôme Crépin, Dominique Geoffroy, Eva Héripré, Arjen Roos. Advances in the constitutive equation parameter identification procedure why experiments should discuss with numerical simulations. TMS2011, 2011, United States. ⟨hal-00645089⟩
  • Jean‐yves Buffiere, Michael Herbig, Wolfgang Ludwig, Henry Proudhon. OS05‐1‐1 3D Characterisation of Damage Mechanisms In Lightweight Structural Materials Using Synchrotron X‐rays. The Abstracts of ATEM: International Conference on Advanced Technology in Experimental Mechanics: Asian Conference on Experimental Mechanics 2011.10, 2011, Unknown, Unknown Region. pp.\_OS05--1. ⟨hal-01669942⟩
  • Fabrice Detrez, Sabine Cantournet, Roland Seguela. Couplage plasticité endommagement dans les polymères semicristallins induit par fragmentation. Colloque Matériaux, 2011, Nantes, France. pp.1. ⟨hal-00779269⟩
  • Samuel Forest, Karam Sab. A stress gradient theory for the homogenization of heterogeneous materials. 2nd International Conference on Material Modelling ICMM2, 2011, France. ⟨hal-00697317⟩
  • Fabrice Detrez, Sabine Cantournet, Roland Seguela. Introduction du mécanisme de fragmentation dans la modélisation des polymères semicristallins. Colloque DEPOS XXIII, 2011, Guidel-Plage, France. pp.1. ⟨hal-00779272⟩
  • Arnaud Beurotte, Michel Boussuge, Laurent Jeanfaivre, Sylvain Gailliègue. Régénération des filtres à particules (FAP) : étude expérimentale et numérique. Matériaux 2010, Oct 2010, Nantes, France. 5 p. ⟨hal-00570473⟩
  • Yang Ding, Michel Boussuge, Michel Gaubil, Samuel Forest, Ludovic Massard, et al.. Relations entre la microstructure 3D et les propriétés mécaniques dans des réfractaires électrofondus à très haute teneur en zircone. Matériaux 2010, Oct 2010, Nantes, France. 6 p. ⟨hal-00570496⟩
  • Benoît Piezel, Lucien Laiarinandrasana, Alain Thionnet. Analyse multiéchelle d'un composite textile. Matériaux 2010, Oct 2010, Nantes, France. 7 p. ⟨hal-00570655⟩
  • Alain Thionnet. Modélisation des composites microfissurés. Utilisation d'un nouveau concept pour la mécanique de l'endommagement inspiré de la mécanique de la rupture. Matériaux 2010, Oct 2010, Nantes, France. 7 p. ⟨hal-00572495⟩
  • Mi He, Jacques Besson, Aurore Parrot, Sylvain Leclercq. Caractérisation du comportement à rupture de tubes de gaines des crayons combustibles après un Accident de Perte de Réfrigérant Primaire. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00570514⟩
  • Abderrahmen Kaabi, Yves Bienvenu, David Ryckelynck, J. Idrac, E. Font. Brasures composites architecturés sans plomb pour les modules électroniques de puissance. Matériaux 2010, Oct 2010, Nantes, France. 11 p. ⟨hal-00570543⟩
  • Y. Shen, Josselin Garnier, Lucien Allais, Jérôme Crépin, Daniel Caldemaison, et al.. Etude de l'anisotropie d'endommagement de l'alliage d'aluminium 6061-T6. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00572454⟩
  • Pauline Huguenin, Emmanuel Herms, François Vaillant, Jérôme Crépin, Cecilie Duhamel, et al.. Approche expérimentale de l'amorçage de la CSC des aciers inoxydables austénitiques pré-déformés en milieu primaire de REP. Matériaux 2010, Oct 2010, Nantes, France. 11 p. ⟨hal-00570529⟩
  • M.C. Amamra, J.-M. Lihrmann, Alain Thorel. Nanostructures originales obtenues par décomposition catalytique d'hydrocarbure. Matériaux 2010, Oct 2010, Nantes, France. 2 p. ⟨hal-00570465⟩
  • Grégory Fabre, Vincent Guipont, Michel Jeandin, Michel Boustié, J.-P. Cuq-Lelandais, et al.. Etude par choc laser de l'adhérence de barrières thermiques aéronautiques. Matériaux 2010, Oct 2010, Nantes, France. 9 p. ⟨hal-00570504⟩
  • H.Y. Chou, Hasnae Zejli, Alain Thionnet, Anthony R. Bunsell, A. Mouritz, et al.. Détection et discrimination par émission acoustique des endommagements dans les composites stratifiés d'unidirectionnels ; rupture de fibre, macro et micro fissuration intralaminaire, microdélaminage. Comparaison expérience/modélisation. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00570483⟩
  • Charlotte Kalck, Benjamin Fournier, Françoise Barcelo, Laurent Forest, France Dalle, et al.. Propriétés en fluage à haute température et caractérisations microstructurales des joints soudés P92. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00570554⟩
  • Mathieu Touboul, Jérôme Crépin, Gilles Rousselier, C. Petry, Félix Latourte. Caractérisation par mesure de champ de l'hétérogénéité de comportement de cordon de soudure en alliage P91 et identification des paramètres de loi de comportement. Matériaux 2010, Oct 2010, Nantes, France. 11 p. ⟨hal-00572502⟩
  • Camille Chateau, Lionel Gélébart, Michel Bornert, Jérôme Crépin, Daniel Caldemaison, et al.. Caractérisation expérimentale de l'endommagement dans les minicomposites SiC/SiC. Matériaux 2010, Oct 2010, Nantes, France. 10p. ⟨hal-00832244⟩
  • Florine Maes, Sabine Cantournet, Laurent Corté, Ludwik Leibler. Etude de l'autoréparation d'élastomères supramoléculaires. Matériaux 2010, Oct 2010, Nantes, France. 2 p. ⟨hal-00570640⟩
  • Abderrahmen Kaabi, Yves Bienvenu, David Ryckelynck, J. Idrac, E. Font, et al.. Substrat architecturé pour une gestion thermique efficace dans les modules électroniques de puissance. Matériaux 2010, Oct 2010, Nantes, France. 5 p. ⟨hal-00570547⟩
  • Melchior Simon-Perret, Jérôme Crépin, Thilo F. Morgeneyer. Etude du comportement mécanique d'un liner de titane. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00572468⟩
  • R. Martinez, I. Guillot, Georges Cailletaud, C. Saudemont, D. Massinon. Caractérisation et modélisation de la précipitation d'un alliage d'aluminium 319. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00570649⟩
  • Alain Thionnet. Proposition d'une conceptualisation et d'une classification des problèmes de fatigue mécanique. Matériaux 2010, Oct 2010, Nantes, France. 8 p. ⟨hal-00572493⟩
  • Michel Leroy, Jacques Renard, Alain Thionnet. Caractérisation d'une colle structurale polyuréthane. Matériaux 2010, Oct 2010, Nantes, France. 8 p. ⟨hal-00570632⟩
  • Morgane Le Millier, Alain Barbu, Olivier Calonne, Jérôme Crépin, Brigitte Décamps, et al.. Corrosion sous contrainte assistée par l'irradiation en milieu primaire d'aciers inoxydables austénitiques. Matériaux 2010, Oct 2010, Nantes, France. 6 p. ⟨hal-00570589⟩
  • Damien Texier, Daniel Monceau, Eric Andrieu, Georges Cailletaud. Effet de l'état métallurgique sur les propriétés mécaniques d'éprouvettes amincies. Matériaux 2010, Oct 2010, Nantes, France. 9 p. ⟨hal-00572488⟩
  • Jérôme Rossignol, Marie-Laetitia Pastor, Alain Thionnet. Détection d'endommagement dans les composites à l'aide d'une technologie utilisant des micro-ondes et par thermographie infrarouge. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00570667⟩
  • Maxime Sauzay, France Dalle, Christel Caës, Ivan Tournié, J. Malaplate, et al.. Comportement mécanique à haute température des aciers martensitiques revenus pour application aux réacteurs à neutrons rapides. Matériaux 2010, Oct 2010, Nantes, France. 14 p. ⟨hal-00570672⟩
  • A.E. Scott, I. Sinclair, S.M. Spearing, M. Mavrogordato, Anthony R. Bunsell, et al.. Comparison of the accumulation of fibre breaks occurring in a unidirectional carbon/epoxy composite identified in a multi-scale micro-mechanical model with that of experimental observations using high resolution computed tomography. Matériaux 2010, Oct 2010, Nantes, France. 9 p. ⟨hal-00572425⟩
  • Konstantin Kuzmenkov, Farida Azzouz, Georges Cailletaud. Multiscale simulation of the dwell effect for the titanium base alloy Ti6242. Matériaux 2010, Oct 2010, Nantes, France. ⟨hal-04085914⟩
  • Alain Thionnet, Anthony R. Bunsell, S. Camara, David H. Allen. Dimensionnement de structures composites par une méthode FE2 simplifiée. Application au calcul de réservoirs composites. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00572499⟩
  • Florent Krajcarz, Anne-Françoise Gourgues-Lorenzon, V. Bochard, E. Lucas, Manuel Bobadilla. Formation et solidification de la zone fondue en soudage par point : influence des paramètres de soudage. Matériaux 2010, Oct 2010, Nantes, France. 12 p. ⟨hal-00570567⟩
  • Sylvain Leclercq, Jacques Besson, Patrick Le Delliou, Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon. Estimation de la durée de vie d'un collecteur en acier P91. Matériaux 2010, Oct 2010, Nantes, France. 8 p. ⟨hal-00570583⟩
  • Stéphanie Hollner, Benjamin Fournier, J. Le Pendu, Christel Caës, I. Tournié, et al.. Optimisation en fluage et fatigue-fluage d'aciers martensitiques à 9%Cr par traitement thermo-mécanique. Matériaux 2010, Oct 2010, Nantes, France. 10 p. ⟨hal-00570519⟩
  • Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, A. Fuchsmann, W. Bendick, et al.. Long term aging effect on the creep strength of the T92 steel. 9th Liege conference : materials for advanced power engineering 2010, Sep 2010, Liege, Belgium. pp.239-248. ⟨hal-00592020⟩
  • Luc Rémy, J.Y. Guedou. Recent trends in superalloys research for critical aero-engine components. 9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.596-611. ⟨hal-00592245⟩
  • Charlotte Kalck, Benjamin Fournier, Françoise Barcelo, Laurent Forest, France Dalle, et al.. High temperature creep properties and microstructural examinations of P92 welds. 9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.424-434. ⟨hal-00592240⟩
  • Francisca Mendez Martin, Clara Panait, Walter Bendick, Mihaela Albu, Bernhard Sonderegger, et al.. Creep strength and microstructural evolution of 9-12%Cr heat resistant steels during creep exposure at 600°C and 650°C. 9th Liege conference : materials for advanced power engineering, Sep 2010, Liege, Belgium. pp.259-269. ⟨hal-00592232⟩
  • Wolfgang Knapp, Sébastien Clement, C. Franz, Mamane Oumarou, Jacques Renard. Laser-bonding of long fiber thermoplastic composites for structural assemblies. Laser Assisted Net Shape Engineering 6, Proceedings of the LANE 2010, Sep 2010, Erlangen, Germany. pp.163-171, ⟨10.1016/j.phpro.2010.08.041⟩. ⟨hal-00565861⟩
  • D. Steglich, H. Wafai, Jacques Besson. Anisotropic plastic deformation and damage in commercial Al 2198 T8 sheet metal. Advances in fracture and damage mechanics IX, Sep 2010, Nagasaki, Japan. pp.97-100, ⟨10.4028/www.scientific.net/KEM.452-453.97⟩. ⟨hal-00602840⟩
  • Thierry Couvant, Laurent Legras, Antoine Herbelin, Andrey Musienko, Gabriel Ilbevare, et al.. Development of Understanding of The Interaction between Localized deformation and SCC of Austenitic Stainless Steels Exposed to Primary Environment. 14th International Conference on Environmental Degradation of Materials in Nuclear Power Systems- Water Reactors, Sep 2010, Virginia Beach, United States. pp.182-194. ⟨emse-01063619⟩
  • Henry Proudhon, Samuel Forest, Wolfgang Ludwig. Large scale finite element simulations of polycrystalline aggregates: applications to X-ray diffraction and imaging for fatigue metal behaviour. 31st Risø International Symposium on Materials Science, Sep 2010, Roskilde, Denmark. pp.121-139. ⟨hal-00531211⟩
  • Wolfgang Ludwig, Peter Reischig, Andrew King, Michael Herbig, Henry Proudhon, et al.. Thoughts about the optimum data acquisition geometry and time resolution of monochromatic beam x-ray diffraction microscopy experiments. 31st Risø International Symposium on Materials Science, Sep 2010, Roskilde, Denmark. pp.317-328. ⟨hal-00530993⟩
  • Clémence Devilliers, Lucien Laiarinandrasana, B. Fayolle, E. Gaudichet-Maurin. Characterisation of aged HDPE pipes from drinking water distribution : investigation of crack depth by Nol ring tests under creep loading. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541101⟩
  • A. Steckmeyer, Benjamin Fournier, J. Malaplate, M. Praud, I. Tournié, et al.. Deformation mechanisms and damage of oxide dispersion strengthened steels at high temperature. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541105⟩
  • Yazid Madi, Jacques Besson, Franck Tankoua, Jianqiang Chen, Naman Recho. Mixed mode ductile fracture of an anisotropic 2024 Al-Cu alloy. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541089⟩
  • Thilo F. Morgeneyer, Henry Proudhon, Jacques Besson. Study of the flat to slant crack transition in ductile thin sheet material : simulations and experiments. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541090⟩
  • Delphine Reche, T. Sturel, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Damage mechanisms of ultrahigh strength steels in bending application to a trip steel. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541087⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloy. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541248⟩
  • Lucien Laiarinandrasana, Guillaume Boisot, C. Fond, Gilles Hochstetter. Toughness improvement of polyamide 11 assessed via quasistatic tensile tests on notched round bars. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541094⟩
  • Jacques Besson, Yasuhiro Shinohara, Thilo F. Morgeneyer, Yazid Madi. Ductile rupture of prestrained X100 pipeline steel sheets. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541106⟩
  • Stéphanie Hollner, Benjamin Fournier, J. Le Pendu, Christel Caës, I. Tournié, et al.. Relationship between microstructure and mechanical behaviour of thermomechanically optimised 9-12% Cr steels. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541091⟩
  • Huaidong Wang, Clotilde Berdin, Matthieu Mazière, Samuel Forest, Claude Prioul, et al.. Influence of dynamic strain ageing on ductile fracture of a C-Mn steel. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541098⟩
  • Lucien Laiarinandrasana, Cédric Regrain. Effect of notch root radius on the creep failure mechanisms on polyamide 6 : application of facture mechanics approaches. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541275⟩
  • Elias Merhy, Luc Rémy, Habibou Maitournam, Louis Augustins. A non-isothermal fatigue crack growth law for the A356-T7 aluminium alloy. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. pp.#43. ⟨hal-00525734⟩
  • R. Lim, Maxime Sauzay, F. Dalle, I. Tournié, Anne-Françoise Gourgues-Lorenzon. Modelling of necking during creep of grade 91 steel. Fracture of materials and structures from micro to macro scale - ECF 18, Aug 2010, Dresden, Germany. 8 p. ⟨hal-00541287⟩
  • Kamel Madi, G. Aufort, Alain Gasser, Samuel Forest. Prediction of the elastic modulus of the trabecular bone based on X-ray computed tomography. 6th World Congress on Biomechanics, Aug 2010, Singapour, Singapore. pp.800-803. ⟨hal-00651334⟩
  • Anthony R. Bunsell, Françoise Barbier, Alain Thionnet, Hasnae Zejli, Brian Besancon. Damage accumulation and lifetime prediction of carbon fiber composite pressure vessels. Pressure vessel technology for energy challenge, Jul 2010, Bellevue (Washington), United States. ⟨hal-03999991⟩
  • Anthony R. Bunsell, Françoise Barbier, Alain Thionnet, Hasnae Zejli, Brian Besancon. Damage accumulation and lifetime prediction of carbon fiber composite pressure vessels. Pressure vessel technology for energy challenge, Jul 2010, Bellevue (Washington), United States. 8 p. ⟨hal-00522600⟩
  • Camille Chateau, L. Gélébart, Michel Bornert, Jérôme Crépin, Daniel Caldemaison, et al.. Experimental characterisation of damage in SiC/SiC minicomposites. ICEM 14 – 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. 8 p., ⟨10.1051/epjconf/20100620002⟩. ⟨hal-00509643⟩
  • Angélique Consil, Noëlle Billon, Lucien Laiarinandrasana. Characterisation of the dilatational stress relaxation for viscoelastic Polyurethane materials. 14th International Conference on Experimental Mechanics (ICEM 14), Jul 2010, Poitiers, France. Article Number 03004 - 2 p., ⟨10.1051/epjconf/20100603004⟩. ⟨hal-00579510⟩
  • Yannick Pannier, Nicolas Lenoir, Michel Bornert. Discrete volumetric digital image correlation for the investigation of granular type media at microscale : accuracy assessment. ICEM 14 – 14th International Conference on Experimental Mechanics, Jul 2010, Poitiers, France. 8 p., ⟨10.1051/epjconf/20100635003⟩. ⟨hal-00509646⟩
  • Wolfgang Ludwig, M. Herbig, A. King, P. Reischig, Henry Proudhon, et al.. The grain microstructure of polycrystalline materials as revealed by the combined use of synchrotron X-ray imaging and diffraction techniques. Journées Annuelles de la SF2M, Jun 2010, Paris, France. ⟨hal-00534495⟩
  • Yves Bienvenu, Abderrahmen Kaabi, David Ryckelynck. Architectural rules for the assembly of miniature laminated two phase components by hot pressing and by roll bonding. LÖT 2010 - 9th International Conference on Brazing, High Temperature Brazing and Diffusion Bonding, Jun 2010, Aachen, Germany. pp.140-145. ⟨hal-00800793⟩
  • Bahram Sarbandi, Jacques Besson, Michel Boussuge, David Ryckelynck. Anisotropic constitutive model and FE simulation of the sintering process of slip cast traditional porcelain. Proceedings of the 10th International Conference on Numerical Methods in Industrial Forming Processes, Jun 2010, Pohang, South Korea. pp.689-696, ⟨10.1063/1.3457622⟩. ⟨hal-00523265⟩
  • Farida Azzouz, Georges Cailletaud, Jean Louis Chaboche, Elisabeth Ostoja-Kuczynski, Stéphane Quilici. Cyclic calculations and life estimation in thermomechanical fatigue. 9th International conference on multiaxial fatigue and fracture, Jun 2010, Parme, Italy. pp.785-793. ⟨hal-00905549⟩
  • Farida Azzouz, Georges Cailletaud, Jean-Louis Chaboche, Elisabeth Ostoja-Kuczynski, Stéphane Quilici. Cyclic calculations and life estimation in thermomechanical fatigue. 9th International Conference on MULTIAXIAL FATIGUE & FRACTURE (ICMFF9), Jun 2010, Parma, Italy. ⟨hal-04085916⟩
  • Georges Cailletaud, Thibault Herbland, B. Melnikov, Andrei Musienko, Stéphane Quilici. A strategy for the estimation of the fatigue life of notched components under random multiaxial fatigue. 9th International conference on multiaxial fatigue and fracture, Jun 2010, Parme, Italy. pp.769-776. ⟨hal-00905539⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, Christel Caës, Benjamin Fournier, et al.. Influence of strain rate on P92 microstructural stability during fatigue tests at high temperature. Fatigue 2010, Jun 2010, Prague, Czech Republic. pp.2141-2150, ⟨10.1016/j.proeng.2010.03.230⟩. ⟨hal-00509939⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Brigitte Bacroix, Hélène Regle. Micromechanical modelling of microtexture formation in low alloy steel bainite. Solid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.1228-1233, ⟨10.4028/www.scientific.net/SSP.172-174.1228⟩. ⟨hal-00619807⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Brigitte Bacroix, Hélène Regle, Frank Montheillet. Effect of the metallurgical state of austenite on the microtexture properties of the bainitic transformation in a low alloy steel. Solid-solid phase transformations in inorganic materials, Jun 2010, Avignon, France. pp.772-777, ⟨10.4028/www.scientific.net/SSP.172-174.772⟩. ⟨hal-00624009⟩
  • Cecilie Duhamel, Régine Molins. Phénomènes de couplages en oxydation à haute température. Corrosion et protection des matériaux à haute température, May 2010, Porquerolles, France. pp.233-250. ⟨hal-00640137⟩
  • Grégory Fabre, Vincent Guipont, Michel Jeandin, M. Boustie, J.-P. Cuq-Lelandais, et al.. Laser Shock Adhesion Test (LASAT) of electron beam physical vapor deposited thermal barrier coatings (EB-PVD TBCs). Euro superalloys 2010, May 2010, Wildbach Kreuth, Germany. pp.509-514, ⟨10.4028/www.scientific.net/AMR.278.509⟩. ⟨hal-00624018⟩
  • S. Hollner, Benjamin Fournier, J. Le Pendu, Christel Caës, I. Tournié, et al.. Influence de traitements thermo-mécaniques sur les performances en fluage et en fatigue d'aciers martensitiques à 9%Cr. JP 2010 - 29èmes journées de printemps, May 2010, Paris, France. pp.121-128. ⟨hal-00509604⟩
  • Thomas Le Jolu, Thilo F. Morgeneyer, Anne-Françoise Gourgues-Lorenzon. Effect of friction stir weld defects on fatigue lifetime of an Al-Cu-Li alloy (AA-2198). JP 2010 - 29èmes journées de printemps, May 2010, Paris, France. pp.139-146. ⟨hal-00509606⟩
  • Aurélie Benoit, Habibou Maitournam, Luc Rémy, Frédéric Oger. Asymptotic behaviour of structures subjected to thermomechanical cyclic loadings: application to exhaust manifolds. European Conference on Computational Mechanics (ECCM 2010), May 2010, Paris, France. ⟨hal-00525723⟩
  • Pierre Laghoutaris, Catherine Guerre, J. Chêne, Régine Molins. Mécanisme de la corrosion sous contrainte de l'alliage 600 en milieu REP : apport à la compréhension des mécanismes. Recueil des journées jeunes chercheurs 2010, Apr 2010, Gif sur Yvette, France. pp.29-33. ⟨hal-00481457⟩
  • Morgane Le Millier, Olivier Calonne, Jérôme Crépin, Cecilie Duhamel, Lionel Fournier, et al.. Corrosion sous contrainte assistée par l'irradiation des internes de cuve (IASCC). Recueil des journées jeunes chercheurs 2010, Apr 2010, Gif sur Yvette, France. pp.53-57. ⟨hal-00481461⟩
  • Samuel Forest. Continuum crystal plasticity theory. Mechanics of nano-objects, Mar 2010, Autrans, France. pp.101-116. ⟨hal-00675596⟩
  • Henry Proudhon, Samuel Forest, Georges Cailletaud. Crystal plasticity modelling. Mechanics of nano-objects, Mar 2010, Autrans, France. pp.155-170. ⟨hal-00675597⟩
  • M. Perrier, A. Deschamps, P. Donnadieu, F. de Geuser, F. Danoix, et al.. Precipitation sequence and kinetics in an Fe-Si-Ti alloy.. PTM2010 - International Conference on Solid-Solid Phase Transformations, 2010, AVIGNON, France. ⟨10.4028/www.scientific.net/SSP.172-174.833⟩. ⟨hal-00610635⟩
  • Wolfgang Ludwig, Peter Reischig, Andrew King, Michael Herbig, Henry Proudhon, et al.. THOUGHTS ABOUT THE OPTIMUM DATA ACQUISITION GEOMETRYAND TIME RESOLUTION OF MONOCHROMATIC BEAM X‐RAY DIFFRACTION MICROSCOPY EXPERIMENTS. The Abstracts of Risø International Symposium on Materials Science: Challenges in materials science and possibilities in 3D and 4D characterization techniques, 2010, Unknown, Unknown Region. ⟨hal-01669981⟩
  • Wolfgang Ludwig, M. Herbig, Jean-Yves Buffiere, P. Reischig, A. King, et al.. Characterization of polycrystalline materials by X-ray diffraction contrast tomography. Mecamat 2010 - Nouvelles approches en mécanique des matériaux, Jan 2010, Aussois, France. ⟨hal-00534494⟩
  • Michel Jeandin, Dimitris K. Christoulis, François Borit, Marie-Hélène Berger, Serge Guetta, et al.. A Socratic approach to surface modification: The example of Thermal Spray. 24th International Conference on SURFACE MODIFICATION TECHNOLOGIES, SMT 24, 2010, Dresden, Germany. pp.12. ⟨hal-00906521⟩
  • Romuald Roucou, Florian Cacho, Vincent Fiori, Karim Inal, Xavier Boddaert. Mechanical study of the probing effect on PAD structures. ARCSIS Micropackaging Days Thin and Flexible Packaging 2009, Oct 2009, Gardanne, France. ⟨emse-00470630⟩
  • L. Piezanowski, J. Hugentobler, J.L. Roth, Cédric Quinard, Thierry Barriere, et al.. Iron powders produced from particulate by-products of steelmaking. Euro Powder Metallurgy 2009, Oct 2009, Copenhague, Denmark. ⟨hal-00435736⟩
  • Cédric Quinard, X. Kong, Thierry Barriere, Jean-Claude Gelin, Yves Bienvenu, et al.. Recycling of ferrous powder by powder injection moulding process. Euro Powder Metallurgy 2009, Oct 2009, Copenhague, Denmark. ⟨hal-00435730⟩
  • Sébastien Joannès. Phenomenological modeling of the elasto-viscoplastic damage behavior of talc-filled epoxy adhesives. ETDCM 9 - 9th Seminar on Experimental Techniques and Design in Composite Materials, Sep 2009, Vicenza, Italy. ⟨hal-02061280⟩
  • Georges Cailletaud, Stéphanie Basseville, Francois Curtit, Yoann Guilhem, Andrei Musienko, et al.. Numerical Simulations of Cracks in Polycrystalline Aggregates. 7th EUROMECH Solid Mechanics Conference (ESMC2009), Sep 2009, Lisbon, Portugal. ⟨hal-01580020⟩
  • Stéphanie Nanga, André Pineau, Benoit Tanguy, Loic Nazé, Pierre-Olivier Santacreu. Strain induced martensitic transformation at high strain rate in two austenitic stainless steel. 9th international conference on the mechanical and physical behaviour of materials under dynamic loading, Sep 2009, Brussels, Belgium. pp.1023-1029. ⟨hal-00425103⟩
  • Anthony R. Bunsell. Property-structure relationships in advanced synthetic fibres. Proceedings of the 10th Asian textile conference - ATC 10, Sep 2009, Ueda, Japan. 11 p. ⟨hal-00425087⟩
  • Loic Nazé, Jean-Loup Strudel. Strain rate effects and hardening mechanisms in Ni base superalloys. Thermec 2009, Aug 2009, Berlin, Germany. pp.53-60, ⟨10.4028/www.scientific.net/MSF.638-642.53⟩. ⟨hal-00448260⟩
  • Eva Héripré, Daniel Caldemaison, A. Roos, Jérôme Crépin. Microstrain analysis of titanium aluminides. Thermec 2009, Aug 2009, Berlin, Germany. pp.1330-1335, ⟨10.4028/www.scientific.net/MSF.638-642.1330⟩. ⟨hal-00448325⟩
  • Matthieu Mazière, Samuel Forest, Jacques Besson, Huaidong Wang, Clotilde Berdin. Numerical simulation of the Portevin Le Chatelier effect in various material and at different scales. Thermec 2009, Aug 2009, Berlin, Germany. pp.2670-2675, ⟨10.4028/www.scientific.net/MSF.638-642.2670⟩. ⟨hal-00448695⟩
  • Thomas Vilaro, V. Kottmann-Rexerodt, M. Thomas, Christophe Colin, Pierre Bertrand, et al.. Direct fabrication of a Ti-47Al-2Cr-2Nb ally by selective laser melting and direct metal deposition processes. Thermec 2009, Aug 2009, Berlin, Germany. pp.586-591, ⟨10.4028/www.scientific.net/AMR.89-91.586⟩. ⟨hal-00448707⟩
  • D.I. Pantelis, K.I. Triantou, C.I. Sarafoglou, Dimitris K. Christoulis, François Borit, et al.. Microstructural study of copper and copper/alumina composite coatings produced by cold spray process. Thermec 2009, Aug 2009, Berlin, Germany. pp.556-561, ⟨10.4028/www.scientific.net/AMR.89-91.556⟩. ⟨hal-00448701⟩
  • Nadia Souaï, Roland E. Logé, Yvan Chastel, Nathalie Bozzolo, Vincent Maurel, et al.. Effect of thermomechanical processes on Σ3 grain boundary distribution in a nickel base superalloy. THERMEC 2009 - International Conference on Processing & Manufacturing of Advanced Materials: Processing, Fabrication, Properties, Applications, Aug 2009, Berlin, Germany. pp.2333-2338, ⟨10.4028/www.scientific.net/MSF.638-642.2333⟩. ⟨hal-00435962⟩
  • Michel Jeandin, Dimitris K. Christoulis, François Borit, Marie-Hélène Berger, Serge Guetta, et al.. Lasers and thermal spray. Thermec 2009, Aug 2009, Berlin, Germany. pp.174-181, ⟨10.4028/www.scientific.net/MSF.638-642.174⟩. ⟨hal-00448274⟩
  • Henry Proudhon, Nicolas Vaxelaire, Stéphane Labat, Samuel Forest, Olivier Thomas. Simulation de la diffraction cohérente d'un film polycristallin. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 4 p. ⟨hal-00664496⟩
  • Henri Tézenas Du Montcel, Loic Nazé, Vincent Maurel, Nadia Souaï, Roland E. Logé, et al.. Ingénierie des joints de grain dans les alliages à base de Nickel. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p. ⟨hal-00664517⟩
  • Vincent Maurel, Mark Harvey, Luc Rémy. Apport des mesures de champs pour la modélisation statistique de l'écaillage d'alumine. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p. ⟨hal-00664494⟩
  • Fabrice Detrez, Roland Seguela, Sabine Cantournet. Quantification et modélisation du couplage plasticité endommagement dans les polymères semicristallins à morphologie sphérolitique. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p. ⟨hal-00664505⟩
  • Rattanak Lim, Maxime Sauzay, France Dalle, Ivan Tournié, Patrick Bonnaillie, et al.. Striction de l'acier 9Cr-1Mo modifié sollicité en fluage. XIXème Congrès Français de Mécanique, Aug 2009, Marseille, France. 6 p. ⟨hal-00664500⟩
  • Jérôme Rossignol, Alain Thionnet. Fibre breakings detection in unidirectional composites using microwave technology. 17th international conference on composite materials, Jul 2009, Edinburgh, United Kingdom. 10 p. ⟨hal-00425094⟩
  • Benoît Piezel, Lucien Laiarinandrasana, Alain Thionnet. A multilevel finite element analysis of a textile composite. 17th international conference on composite materials, Jul 2009, Edinburgh, United Kingdom. 8 p. ⟨hal-00425089⟩
  • Alain Thionnet, Anthony R. Bunsell, S. Camara, David H. Allen. A simplified FE2 model of fibre failure and its consequences applied to the design of composite pressure vessels. 17th international conference on composite materials, Jul 2009, Edinburgh, United Kingdom. 10 p. ⟨hal-00425096⟩
  • Faten Bourbita, Luc Rémy, Alain Köster. Thermal-mechanical fatigue behaviour of a titanium matrix composite reinforced with long SiC fibers. 17th international conference on composite materials, Jul 2009, Edinburgh, United Kingdom. 10 p. ⟨hal-00425098⟩
  • Jianqiang Chen, Jacques Besson, Yazid Madi. Characterization and modeling of ductile rupture with relationship to microstructures in 2198 Al-Li alloy for aeronautic application. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822292⟩
  • Benjamin Fournier, M. Salvi, Christel Caës, J. Malaplate, France Dalle, et al.. High temperature mechanical strength and microstructural stability of advanced 9-12%Cr steels and ODS steels. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822179⟩
  • Julie Lorthios, Anne-Françoise Gourgues, P. Cugy, C. Scott. Damage of TWIP steels for automotive application. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822287⟩
  • Marion Geuffrard, Luc Rémy, Alain Köster. Lifetime modelling of fatigue crack initiation from casting defects. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822184⟩
  • Yoann Guilhem, Georges Cailletaud, Stéphanie Basseville, Francois Curtit, Jean-Michel Stephan. A study of the cluster effect on fatigue crack initiation. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822329⟩
  • Thilo F. Morgeneyer, Jacques Besson, Henry Proudhon, M.J. Starink, I. Sinclair. Experimental and computational analysis of toughness anisotropy in an AA2139 Al-alloy for aerospace applications. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822196⟩
  • Thibault Herbland, Georges Cailletaud, Stéphane Quilici. Evaluation of local stress and strain state at notch root by means of a new method valid for multiaxial random loadings. International conference on fracture, Jul 2009, Ottawa, Canada. 10 p. ⟨hal-00822193⟩
  • Sébastien Joannès, Jacques Renard. p-FEM applied to adhesively bonded composite structures and multi-materials parts. ICCS 15 - 15th International Conference on Composites Structures, Jun 2009, Porto, Portugal. ⟨hal-02061993⟩
  • Nicolas Revest, Alain Thionnet, Jacques Renard, Laurent Boulay, Philippe Castaing. Comportement en fatigue de structures épaisses en matériaux composites = Fatigue behaviour of thick composite structures. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00390937⟩
  • Alain Thionnet, Anthony R. Bunsell, S. Camara, David H. Allen. Methode FE2 simplifiée appliquée à la modélisation des ruptures de fibres et de ses conséquences. Calcul de réservoirs composites = A simplified FE2 method to model fibre breaks and their consequences. Application to pressure vessels calculation. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00397885⟩
  • Alain Thionnet. Mode d'ouverture d'une fissure : de la mécanique de la rupture à la mécanique de l'endommagement = Crack opening mode : from fracture mecanichs to damage mecanichs. JNC 16, Jun 2009, Toulouse, France. 7 p. ⟨hal-00386236⟩
  • Jérôme Rossignol, Alain Thionnet. Détection des ruptures de fibres et du délaminage dans les composites verre/époxy et carbone/époxy à l'aide de structures propagatives dans la gamme des micro-ondes = fibre breaks and delamination detection in composites by using propagative structures in the microwaves frequencies. JNC 16, Jun 2009, Toulouse, France. 10 p. ⟨hal-00392609⟩
  • Benoît Piezel, Lucien Laiarinandrasana, Jacques Renard, Alain Thionnet. Analyse expérimentale d'un composite textile en vue d'une modélisation multiéchelle = Experimental analysis of a textile composite for multiscale modelling purposes. JNC 16, Jun 2009, Toulouse, France. 9 p. ⟨hal-00391149⟩
  • Cédric Thomas, Fabien Nony, Stéphane Villalonga, Christophe Magnier, Philippe Mazabraud, et al.. Etude de l'endommagement de structures composites à matrice thermoplastique : application aux réservoirs de stockage hyperbare de l'hydrogène = Study of damages on thermoplastic composite structures: application for hydrogen storage vessels under high pressure. JNC 16, Jun 2009, Toulouse, France. 9 p. ⟨hal-00384460⟩
  • Benoît Piezel, Lucien Laiarinandrasana, Alain Thionnet. Analyse multiéchelle d'un composite textile = Multiscale analysis of a textile composite. JNC 16, Jun 2009, Toulouse, France. 7 p. ⟨hal-00391172⟩
  • Henry Proudhon, Stéphanie Basseville, Lingtao Sun, Georges Cailletaud. Effet de la microstructure sur la propagation des fissures de fretting. 9e colloque national en calcul des structures, May 2009, Giens, France. pp.167-172. ⟨hal-00399550⟩
  • Kais Ammar, Benoit Appolaire, Georges Cailletaud, Frédéric Feyel, Samuel Forest. Modélisation du couplage changement de phase-mécanique par la méthode des champs de phases et les techniques d'homogénéisation. 9e colloque national en calcul des structures, May 2009, Giens, France. pp.389-394. ⟨hal-00399552⟩
  • Sophie Cartel, Djamel Missoum Benziane, David Ryckelynck. Modélisation algorithmique par réduction de modèle et maîtrise des événements recurrents inhérents aux problèmes d'optimisation. 9e Colloque national en calcul des structures, May 2009, Giens, France. pp.117-122. ⟨hal-01391194⟩
  • Vladislav Yastrebov, Georges Cailletaud, Frédéric Feyel. Traitement des problèmes de contact en calcul parallèle. Neuvième colloque en calcul des structures, May 2009, Giens, France. pp.647-652. ⟨hal-00399755⟩
  • Ibrahima Gueye, Xavier Juvigny, Frédéric Feyel, François-Xavier Roux, Georges Cailletaud. Mise en œuvre d'un solveur direct parallèle pour l'inversion des problèmes locaux au sein d'une méthode de décomposition de domaine. 9e colloque en calcul des structures, May 2009, Giens, France. pp.417-422. ⟨hal-00399557⟩
  • Jean-Didier Garaud, Luce Fleitout, Georges Cailletaud. Simulation parallèle de la relaxation post-sismique dans la région de Sumatra. Neuvième colloque en calcul des structures, May 2009, Giens, France. pp.585-590. ⟨hal-00399738⟩
  • Camille Chateau, Lionel Gelebart, Michel Bornert, Jérôme Crépin, Daniel Caldemaison. Approche multi-échelle du comportement mécanique des matériaux composites SiC/SiC : comportement élastique à l'échelle du toron. Neuvième colloque en calcul des structures, May 2009, Giens, France. pp.357-362. ⟨hal-00401179⟩
  • Guy Sola, Gilles Surdon, Yvan Chastel, André Pineau. Développement d'un modèle rhéologique de fluage-relaxation de l'aluminium 7050 pour le formage au revenu de panneaux de voilure. 9e colloque national en calcul des structures, CSMA, May 2009, Giens, France. ⟨hal-01413788⟩
  • Sébastien Joannès, Jacques Renard. Abaqus user element for an accurate modeling of adhesive joints on coarse meshes. SSC 2009 - SIMULIA Customer Conference, DS SIMULIA, May 2009, London, United Kingdom. ⟨hal-02061277⟩
  • Nicolas Revest, Jacques Renard, Alain Thionnet, Laurent Boulay, Philippe Castaing. Suivi de l'endommagement dans les structures en composites par une analyse optique in-situ. Journées de printemps, 2009, May 2009, Paris, France. pp.97-104. ⟨hal-00399541⟩
  • D.K. Christoulis, Serge Guetta, Vincent Guipont, Marie-Hélène Berger, Michel Jeandin, et al.. Cold spraying combined to laser surface pre-treated using PROTAL. International Thermal Spray Conference, May 2009, Las Vegas, United States. pp. ⟨hal-00471146⟩
  • Matthieu Mazière, Jacques Besson, Samuel Forest, Huaidong Wang, Clotilde Berdin. Simulation par éléments finis de l'effet Portevin-Le Chatelier dans divers alliages métalliques et à différentes échelles. Neuvième colloque national en calcul des structures, May 2009, Giens, France. pp.437-442. ⟨hal-01415746⟩
  • David Ryckelynck. Hyper reduction of finite strain elasto-plastic models. 12th ESAFORM Conference on Material Forming, Apr 2009, Enschede, Netherlands. pp.567-571, ⟨10.1007/s12289-009-0424-x⟩. ⟨hal-00523240⟩
  • Gilles Rousselier, F. Barlat, J.W. Yoon. A novel approach for modeling of anisotropic hardening and non proportional loading paths, application to finite element analysis of deep drawing. 12th ESAFORM Conference on Material Forming, Apr 2009, Enschede, Netherlands. pp.367-370, ⟨10.1007/s12289-009-0423-y⟩. ⟨hal-00456134⟩
  • Marc Grieu, Gregor Massiot, Olivier Maire, Catherine Munier, Yves Bienvenu, et al.. Modelling of Sn3.0Ag0.5Cu thermo-mechanical behaviour by a continuum damage approach. 10th Int. conf. on thermal, mechanical and multiphysics simulation and experiments in micro-electronics and micro-systems, EuroSimE 2009, Apr 2009, Delft, Netherlands. 6 p. ⟨hal-00456400⟩
  • Florian Vivier, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, C. Petry, Y. de Carlan, et al.. Metallurgical properties and creep behaviour of a grade 91 steel base metal and weldment after short-term exposure at 500°C. 2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.906-918. ⟨hal-00413221⟩
  • Pierre-François Giroux, F. Dalle, Maxime Sauzay, G. Perez, I. Tournié, et al.. Mechanical and microstructural stability of P92 steel under uniaxial tension at high temperature. 2nd ECCC Creep conference, Apr 2009, Zurich, Switzerland. pp.477-487. ⟨hal-00411745⟩
  • Clara Panait, W. Bendick, A. Fuchsmann, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Study of the microstructure of the grade 91 steel after more than 100 000h of creep exposure at 600°C. 2nd ECCC International Conference on Creep and Fracture in High Temperature Components: Design and Life Assessment Issues, Apr 2009, Zurich, Switzerland. pp.877-888. ⟨hal-00413783⟩
  • Ozgur Aslan, Samuel Forest. The micromorphic versus phase field approach to gradient plasticity and damage with application to cracking in metal single crystals. international colloquium on multiscale methods in computational mechanics, Mar 2009, Rolduc, Netherlands. pp.135-153, ⟨10.1007/978-90-481-9809-2_8⟩. ⟨hal-00570265⟩
  • Lionel Gélébart, Camille Chateau, Michel Bornert, Jérôme Crépin, Elodie Boller. X-ray tomographic characterization of the macroscopic porosity of CVI SiC/SiC composites - Effects on the elastic behavior. 33rd International Conference and Exposition on Advanced Ceramics and Composites, Jan 2009, Daytona, United States. pp.33-46, ⟨10.1002/9780470584002.ch3⟩. ⟨hal-00626410⟩
  • Camille Chateau, Lionel Gélébart, Michel Bornert, Jérôme Crépin, Daniel Caldemaison. Multiscale approach of mechanical behaviour of SiC/SiC composites : elastic behaviour at the scale of the tow. 1st International Conference on Material Modelling (ICMM1), 2009, Dortmund, Germany. pp.45-55. ⟨hal-00490495⟩
  • M. Pineda, Francisco Chinesta, F. Daim, J. Roger. Model Reduction with the Proper Orthogonal Decomposition of the Meshless natural Element Model of a Rotative Electromagnetic Machine. COUPLED 2009 - Computational Methods for Coupled Problems in Science and Engineering, 2009, Ischia, Italy. ⟨hal-01008446⟩
  • Cédric Broussillou, J.-P. Cuq-Lelandais, E. Lescoute, L. Berthe, M. Boustie, et al.. Laser shock adhesion test (LASAT) of thin films in CuInS2-based solar cells. 23rd International conference on surface modification technologies, 2009, Madras, India. pp. ⟨hal-00471150⟩
  • Elodie Lefort-Sorlier, Christophe Colin, Alfazazi Dourfaye. Gradation process by imbibition in WC-Co for mining tools application. Advances in Materials and Processing Technologies, Nov 2008, Manama, Bahrain. pp.810-817, ⟨10.4028/www.scientific.net/AMR.83-86.810⟩. ⟨hal-00461475⟩
  • Anais Gaubert, Samuel Forest. Modeling size effect dependence on mechanical behaviour using a Cosserat crystal plasticity framework. Multiscale materials modeling, Oct 2008, Tallahassee, United States. pp.174-177. ⟨hal-00359211⟩
  • L. Berthe, M. Boustie, T. de Resseguier, Serge Guetta, P. Combis, et al.. CODLIS (Coating Deposition using Laser Induced Spallation). ICALEO 2008, Oct 2008, Temecula, United States. Paper #M701. ⟨hal-00418764⟩
  • Céline Gérard, Franck N'Guyen, Nikolay Osipov, Georges Cailletaud, Michel Bornert, et al.. Finite element simulation of strain localisation scheme, and comparison with experimental results, under cyclic loading path. 18th International Workshop of Computational Mechanics of Materials, Oct 2008, Beijing, China. ⟨hal-00367340⟩
  • K.I. Triantou, C.I. Sarafoglou, T. Tsiourva, D.I. Pantelis, Dimitris K. Christoulis, et al.. Case studies of cold sprayed coatings. 7th international conference « The » coatings in manufacturing engineering, Oct 2008, Chalkidiki, Greece. pp.279-288. ⟨hal-00343790⟩
  • Thilo F. Morgeneyer, I. Sinclair, Jacques Besson, M.J. Starink. Direct observation and analysis of failure initiation and crack progression in tear toughness of two Al sheet alloys. ICAA 11, International conference on aluminium alloys, Sep 2008, Aachen, Germany. pp.1504-1510. ⟨hal-00336612⟩
  • J. Nazon, Marie-Hélène Berger, J. Sarradin, Jean-Claude Tedenac, Nicole Fréty. Thermal stability of TaN-based thin layers for Cu metallization. 11th International Conference on Plasma Surface Engineering, PSE 2008, Sep 2008, Garmisch-Partenkirchen, Germany. pp.200. ⟨hal-00352402⟩
  • J.Y. Guedou, Isabelle Augustins-Lecallier, Loic Nazé, P. Caron, D. Locq. Development of a new fatigue and creep resistant PM nickel-base superalloy for disk applications. Superalloys 2008, Sep 2008, Seven Springs, United States. pp.21-30. ⟨hal-00379084⟩
  • Benjamin Fournier, Maxime Sauzay, Christel Caës, Michel Noblecourt, Michel Mottot, et al.. Lifetime prediction of 9-12%Cr subjected to creep-fatigue at high temperature. ECF 17, Sep 2008, Brno, Czech Republic. pp.1366-1372. ⟨hal-00329765⟩
  • Lucien Laiarinandrasana, Mélanie Lafarge, Gilles Hochstetter. Fracture mechanics concepts applied to PVDF polymeric material exhibiting porosity, time and temperature dependency. ECF 17, Sep 2008, Brno, Czech Republic. pp.1562-1569. ⟨hal-00329769⟩
  • Cédric Regrain, Lucien Laiarinandrasana, Sophie Toillon. Experimental and numerical study of behaviour, damage and crack propagation of PA6. ECF 17, Sep 2008, Brno, Czech Republic. pp.1617-1624. ⟨hal-00329774⟩
  • Stéphanie Nanga, André Pineau, Pierre-Olivier Santacreu, Benoit Tanguy. Strain induced martensitic transformations in two austenitic stainless steels : macro-micro behaviour. ECF 17, Sep 2008, Brno, Czech Republic. pp.1373-1380. ⟨hal-00329766⟩
  • Jacques Besson, Yasuhiro Shinohara, Thilo F. Morgeneyer, Yazid Madi. Effect of prestrain on ductility of a X100 pipeline steel. ECF 17, Sep 2008, Brno, Czech Republic. pp.757-764. ⟨hal-00329777⟩
  • Guillaume Boisot, C. Fond, Gilles Hochstetter, Lucien Laiarinandrasana. Failure of polyamide 11 using a damage finite elements model. ECF 17, Sep 2008, Brno, Czech Republic. pp.1554-1561. ⟨hal-00329773⟩
  • Jean-Yves Rouvière, Jacques Besson, Sabine Cantournet. Fatigue reinforcement in natural rubber containing carbon black fillers. ECF 17, Sep 2008, Brno, Czech Republic. pp.2482-2487. ⟨hal-00329800⟩
  • Alain Köster, Mustapha Dib, Luc Rémy, Claude Amzallag. Shielding effects in multiple fatigue cracks : an experimental simulation of thermal fatigue effects, in stainless steel 304. ECF 17, Sep 2008, Brno, Czech Republic. pp.265-272. ⟨hal-00329716⟩
  • Florian Vivier, Clara Panait, Anne-Françoise Gourgues-Lorenzon, Jacques Besson. Microstructure evolution in base metal and welded joint of Grade 91 martensitic steels after creep at 500-600°C. ECF 17, Sep 2008, Brno, Czech Republic. pp.1095-1102. ⟨hal-00329783⟩
  • Henry Proudhon, F. Fazeli, W.J. Poole. The temperature dependence of the Bauschinger effect in AA6111. ICAA 11, International conference on aluminium alloys, Sep 2008, Aachen, Germany. pp.1641-1646. ⟨hal-00336609⟩
  • B. Fedelich, Ernst Affeldt, H. Harders, Nicolas Marchal, F. Muller, et al.. Experimental characterization of high temperature fatigue crack growth in a single crystal superalloy for gas turbine applications. ECF 17, Sep 2008, Brno, Czech Republic. pp.1336-1343. ⟨hal-00329759⟩
  • Matthieu Le Saux, Jacques Besson, Sébastien Carassou, Christophe Poussard, Xavier Averty. Failure of hydrided zircaloy-4 fuel cladding tubes under RIA loading conditions. ECF 17, Sep 2008, Brno, Czech Republic. pp.2047-2054. ⟨hal-00329805⟩
  • Marc Grieu, Olivier Maire, Gregor Massiot, Catherine Munier, Yves Bienvenu, et al.. Sn3.0Ag0.5Cu solder joints lifetime estimation for electronic assemblies under random vibration. 2nd Electronic system integration technology conference, Sep 2008, London, United Kingdom. 6 p. ⟨hal-00329681⟩
  • Stéphanie Nanga, André Pineau, Benoit Tanguy, Loic Nazé, Pierre-Olivier Santacreu. Plasticity and strain induced martensitic transformation in two austenitic stainless steels. International conference on martensitic transformations, Jun 2008, Santa Fe, United States. pp.341-348. ⟨hal-00509934⟩
  • Olivier Amsellem, Kamel Madi, François Borit, Dominique Jeulin, Vincent Guipont, et al.. Three-dimensional simulation of porosity in plasma-sprayed alumina using microtomography and electrochemical impedance spectrometry for finite element modeling of properties. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.996-1001. ⟨hal-00312069⟩
  • Dimitris K. Christoulis, François Borit, Vincent Guipont, Michel Jeandin. Evidence of the 2-stage build-up process in cold spray from the study of influence of powder characteristics on Ti-6Al-4V coating. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.848-853. ⟨hal-00312683⟩
  • Serge Guetta, Marie-Hélène Berger, François Borit, Vincent Guipont, Michel Jeandin, et al.. Influence of particle velocity on adhesion of cold sprayed splats. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.738-743. ⟨hal-00312677⟩
  • Marc Bernacki, Roland E. Logé, P.R. Dawson, D. Boyce, Andras Borbely, et al.. Short course: Digital material. The 15th International Conference on Textures of Materials (ICOTOM 15), Jun 2008, Pittsburgh, United States. ⟨hal-01870998⟩
  • Sophie Lubin, Anne-Françoise Gourgues-Lorenzon, Hélène Regle, Frank Montheillet, Brigitte Bacroix. EBSD investigation of phase transformation in low carbon steels. Materials processing and texture, Jun 2008, Pittsburgh, United States. pp.243-250, ⟨10.1002/9780470444191.ch26⟩. ⟨hal-00871233⟩
  • Gilles Rolland, François Borit, Vincent Guipont, Michel Jeandin, L. Bara, et al.. Three-dimensional analysis of cold sprayed coatings using microtomography. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.607-610. ⟨hal-00312680⟩
  • K.I. Triantou, C.I. Sarafoglou, D.I. Pantelis, Dimitris K. Christoulis, Vincent Guipont, et al.. A microstructural study of cold sprayed Cu coatings on 2017 Al alloy. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.49-53. ⟨hal-00312687⟩
  • Yuji Ichikawa, T. Miyazaki, Kazuhiro Ogawa, Tetsuo Shoji, Michel Jeandin. Deposition mechanism of cold sprayed MCrAlY coatings focused on nanostructure. ITSC 2008, Jun 2008, Maastricht, Netherlands. pp.283-287. ⟨hal-00312700⟩
  • Mark Harvey, Matthieu Rambaudon, Vincent Maurel, Luc Rémy. Oxide spallation in beta-NiAl coated systems under mechanical loading. High temperature corrosion and protection of materials 7, May 2008, Les Embiez, France. pp.101-106, ⟨10.4028/www.scientific.net/MSF.595-598.101⟩. ⟨hal-00329617⟩
  • Mohamed Sennour, Loic Marchetti, Stéphane Perrin, Régine Molins, Michèle Pijolat, et al.. The Characterization of the oxide films formed at the surface of Ni-base alloys in pressurized water reactors primary coolant by transmission electron microscopy. 7th International Symposium on High Temperature Corrosion and Protection of Materials, May 2008, Les Embiez, France. pp.539-547, ⟨10.4028/www.scientific.net/MSF.595-598.539⟩. ⟨emse-00590705⟩
  • Marion Chieux, Régine Molins, Luc Rémy, Cecilie Duhamel, Mohamed Sennour, et al.. Effect of material and environmental parameters on the microstructure evolution and oxidation behavior of a Ni-based superalloy coated with a Pt-modified Ni-aluminide. High temperature corrosion and protection of materials 7, May 2008, Les Embiez, France. pp.33-40, ⟨10.4028/www.scientific.net/MSF.595-598.33⟩. ⟨hal-00329644⟩
  • P. Davies, Céline Lechat, Anthony R. Bunsell, Anne Piant. Deepwater moorings with high stiffness polyester and PEN fiber ropes. Offshore technology conference, May 2008, Houston, United States. 10 p. ⟨hal-00280958⟩
  • Laurent Vanoverberghe, Lucia Garcia-Aranda, David Ryckelynck, Yvan Chastel. Detection of deviations origins in a heat treatment process using Proper Orthogonal Decomposition (POD) basis. 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.Pages 1055-1058, ⟨10.1007/s12289-008-0200-3⟩. ⟨hal-00391672⟩
  • Gilles Rousselier, F. Barlat. Modeling of plastic anisotropy with reduced polycrystalline models. Application to aluminum alloys. 11th ESAFORM Conference on Material Forming, Apr 2008, Lyon, France. pp.269-272, ⟨10.1007/s12289-008-0352-1⟩. ⟨hal-00391666⟩
  • Marc Grieu, Gregor Massiot, Olivier Maire, Agnès Chaillot, Catherine Munier, et al.. Durability modelling of a BGA component under random vibration. Thermal, mechanical and multi-physics, simulation and experiments in microelectronics and micro-systems 2008, Apr 2008, France. 8 p., ⟨10.1109/ESIME.2008.4525047⟩. ⟨hal-00329696⟩
  • Olivier Amsellem, Kamel Madi, François Borit, Dominique Jeulin, Vincent Guipont, et al.. Three-dimensional simulation of porosity in plasma-sprayed alumina using microtomography, electrochemical impedance spectrometry for finite element modeling of properties. IEEE Conference on Intelligent Transportation Systems, 2008, Düsseldorf, Germany. pp.996-1001. ⟨hal-00906514⟩
  • Esteban P. Busso, Guillaume Abrivard, Georges Cailletaud, Samuel Forest. Microstructural heterogeneities induced by deformation prior to thermal recrystallisation in polycrystalline aggregates. 14th international symposium on plasticity & its current applications, Jan 2008, Hawai, France. pp.415-417. ⟨hal-00261345⟩
  • Christian Beauger, Patrick Achard, Julien C. Marie, Alain Thorel, Julien Hafsaoui, et al.. Pile à combustible, production d'hydrogène à partir de biomasse, stockage d'hydrogène sur carbones nanostructurés, analyse du cycle de vie : un projet du groupe des Ecoles des Mines en génie des procédés, énergie et environnement (GEM GP E2). 11ème Congrès de la Société Française de Génie des Procédés, Oct 2007, Saint-Étienne, France. pp.Thème 3 Article 339. ⟨emse-00432363⟩
  • Sébastien Joannès, Vladimir Gantchenko, Jacques Renard. Evaluation of fatigue damage mechanisms of multi-materials bonded joints. ICFC 4 - 4th International Conference on Fatigue of Composites, Sep 2007, Kaiserslautern, Germany. ⟨hal-02061279⟩
  • Michel Boustié, Alain Claverie, T. de Resseguier, Laurent Berthe, Mariette Nivard, et al.. Experimental simulation of bonding processes by laser spallation. Twenty first international conference on surface modification technologies, Sep 2007, Paris, France. pp.191-196. ⟨hal-00319319⟩
  • M. Duchamp, Jean-Dominique Bartout, Samuel Forest, Yves Bienvenu, G. Walther, et al.. Mechanical behavior of nickel base foams for diesel particle filter applications. Mechanical properties of cellular materials, Sep 2007, Cachan, France. pp.51-67, ⟨10.1007/978-1-4020-9404-0⟩. ⟨hal-00379128⟩
  • Melis Arslan, Sabine Cantournet, M.C. Boyce. Effect of triangulation irregularities on the large deformation stress-strain behaviour of triangulated network membranes. Constitutive models for rubber V - ECCMR 2007, Sep 2007, Paris, France. pp.379-382. ⟨hal-00183084⟩
  • Jean-Yves Rouvière, Amine Bennani, Daniel Pachoutinsky, Jacques Besson, Sabine Cantournet. Influence of mechanical and fatigue loading on crystallization of carbon black-filled natural rubber. Constitutive models for rubber V - ECCMR 2007, Sep 2007, Paris, France. pp.323-326. ⟨hal-00183065⟩
  • Alexandre Dalloz, Anne-Françoise Gourgues, André Pineau, Jacques Besson, T. Sturel. Influence of the shear cutting process on damage in laboratory dual phase steels developed for automotive application. Materials science and technology (MS&T 07), Sep 2007, Detroit, United States. pp.171-181. ⟨hal-00182985⟩
  • Anthony Burteau, Jean-Dominique Bartout, Samuel Forest, Yves Bienvenu, S. Saberi, et al.. Investigation of representative volume element size for the mechanical properties of open-cell nickel foams. MetFoam 2007, Sep 2007, Montreal, Canada. pp.471-474. ⟨hal-00343798⟩
  • J. Nazon, V. Flaud, J. Sarradin, Jean-Claude Tedenac, Nicole Fréty, et al.. Microstructural characterization of TaN coatings. Twenty first international conference on surface modification technologies, Sep 2007, Paris, France. pp.403-409. ⟨hal-00319324⟩
  • Aurélie Jean, Dominique Jeulin, Sabine Cantournet, Samuel Forest, Franck N'Guyen, et al.. Rubber with carbon black fillers : parameters identification of a multiscale nanostructure model. Constitutive models for rubber V - ECCMR 2007, Sep 2007, Paris, France. pp.141-146. ⟨hal-00183046⟩
  • Eva Heripre, Georges Cailletaud. Etude de l'effet du revêtement sur le comportement en fretting. 18ème congrès français de mécanique [CFM2007], Aug 2007, France. pp.CFM2007-0626. ⟨hal-00645057⟩
  • Matthieu Mazière, Jacques Besson, Samuel Forest, Benoit Tanguy, François Vogel, et al.. Influence de la loi de comportement sur la prévision de l'éclatement d'un disque de turbomachine. 18ème congrès français de mécanique, Aug 2007, Grenoble, France. 6 p. ⟨hal-00192936⟩
  • Ibrahima Gueye, Xavier Juvigny, François-Xavier Roux, Frédéric Feyel, Georges Cailletaud. Analyse et développement d'algorithmes parallèles pour la résolution directe de grands systèmes linéaires creux. 18ème congrès français de mécanique, Aug 2007, Grenoble, France. ⟨hal-00192942⟩
  • Jeanne Belotteau, Clotilde Berdin, Samuel Forest, Aurore Parrot, Claude Prioul. Comportement et rupture d'aciers en présence de vieillissement sous déformation. CFM 2007 - 18ème Congrès Français de Mécanique, Aug 2007, Grenoble, France. ⟨hal-03362366⟩
  • Aurélie Jean, Sabine Cantournet, Samuel Forest, Dominique Jeulin, Valérie Mounoury, et al.. Modélisation de la nanostructure d'un élastomère chargé. CFM 2007 - 18e Congrès Français de Mécanique, Aug 2007, Grenoble, France. ⟨hal-03362358⟩
  • Aurélie Jean, Sabine Cantournet, Samuel Forest, Dominique Jeulin, Valérie Mounoury, et al.. Modélisation de la nanostructure d'un élastomère chargé. 18ème congrès français de mécanique, Aug 2007, Grenoble, France. 6 p. ⟨hal-00192943⟩
  • Fabien Szmytka, Luc Rémy, Habibou Maitournam, Alain Köster, Myriam Bourgeois, et al.. Détermination d'une nouvelle loi de comportement élasto-viscoplastique pour une fonte à graphite sphéroidal. Application au dimensionnement à la fatigue oligocyclique d'un collecteur d'échappement de moteur diesel automobile. 18ème congrès français de mécanique, Aug 2007, Grenoble, France. ⟨hal-00192929⟩
  • Josselin Garnier, P. Dubuisson, M. Delnondedieu, J.P. Massoud, Y. Brechet, et al.. Deformation under irradiation of 304L and 316 austenitic stainless steels. 13th International conference on environmental degradation of materials in nuclear power systems, Aug 2007, Whistler, Canada. 13 p. ⟨hal-00336560⟩
  • Andrei Musienko, Olivier Diard, Georges Cailletaud. A model for damage, opening and sliding of grain boundaries. ICF Interquadrennial conference, Jul 2007, Moscou, Russia. 14 p. ⟨hal-00183245⟩
  • Arjen Roos, Eva Heripre, Jerome Crepin, Jean Louis Chaboche. Microstrains, macrostresses and the role of subsurface fields in the identification of constitutive laws. Eccomas, Jun 2007, Pragues, Czech Republic. ⟨hal-00163888⟩
  • M. Boustie, J.-P. Cuq-Lelandais, L. Berthe, C. Bolis, Sophie Barradas, et al.. Damaging of materials by bi-dimensional dynamic effects. Proceedings of the 15th American Physical Society Topical Conference on Shock Compression of Condensed Matter, Jun 2007, xx, United States. pp.1323-1326, ⟨10.1063/1.2832967⟩. ⟨hal-00414464⟩
  • Rémi Costa, Julien Hafsaoui, Arnaud Grosjean, Marie-Hélène Berger, Dominique Jeulin, et al.. Elaboration by organic tape casting and co-sintering of anode/electrolyte half cells for protonic ceramic fuel cell (PCFC). 10th ECerS conference (European ceramic society), Jun 2007, Berlin, Germany. pp.880-884. ⟨hal-00319683⟩
  • Jérome Rossignol, Alain Thionnet. Détection d'endommagement dans les composites à l'aide de la technologie micro-onde. 15èmes Journées nationales sur les composites (JNC 15), Jun 2007, Marseille, France. 8 p. ⟨hal-00238516⟩
  • Michel Boussuge. Recent advances in the study of the thermomechanical properties of fused-cast refractories at macro and micro scales. 10th international conference of the European ceramic society, Jun 2007, Berlin, Germany. pp.1936-1941. ⟨hal-00312057⟩
  • Tolga Tavsanoglu, S. Labdi, Michel Jeandin, O. Addemir. Characterization of boron carbide thin films grown by DC magnetron sputtering of a hot pressed boron carbide target. 10th ECerS conference (European ceramic society), Jun 2007, Berlin, France. pp.265-270. ⟨hal-00319679⟩
  • Guillaume Abrivard, Esteban P. Busso, Georges Cailletaud, Samuel Forest. Modeling of deformation of FCC polycrystalline aggregates using a dislocation-based crystal plasticity model. NUMIFORM'07 - Materials processing and design : modeling, simulation and applications, Jun 2007, Porto, Portugal. pp.661-666. ⟨hal-00183253⟩
  • Stéphanie Basseville, Olivier Vernhet, Georges Cailletaud. Une modélisation du troisième corps dans le cas du fretting. 8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France. pp.327-332. ⟨hal-01488166⟩
  • Fabien Szmytka, Habibou Maitournam, Luc Rémy, Alain Köster, Myriam Bourgeois, et al.. Comportement élastoviscoplastique d'une fonte GS et son intégration numérique. 8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France. pp.283-288. ⟨hal-01487614⟩
  • Matthieu Mazière, Jacques Besson, Samuel Forest, Benoit Tanguy, Hervé Chalons, et al.. Simulation de l'effet Portevin-Le Chatelier dans un superalliage pour disque de turbomachine. 8e Colloque national en calcul des structures, CSMA, May 2007, Giens, France. pp.193-198. ⟨hal-01495825⟩
  • Georges Cailletaud. Une introduction à la plasticité cristalline interactions avec l'environnement. PlastOx 2007, May 2007, Argelès-sur-Mer, France. pp.81-115, ⟨10.1051/ptox/2009008⟩. ⟨hal-01497918⟩
  • Kais Ammar, Benoit Appolaire, Georges Cailletaud, Frédéric Feyel, Samuel Forest. Formulation éléments finis des modèles de champ de phases basée sur la théorie de l'équilibre des microforces. PlastOx 2007, May 2007, Argelès-sur-Mer, France. pp.117-129, ⟨10.1051/ptox/2009009⟩. ⟨hal-00391689⟩
  • Yuji Ichikawa, Tetsuo Shoji, K. Sakaguchi, Kazuhiro Ogawa, Sophie Barradas, et al.. Deposition mechanisms of cold gas dynamic sprayed MCrAlY coatings. Thermal spray 2007 - Global coating solutions, May 2007, Beijing, China. pp.54-59. ⟨hal-00411727⟩
  • Laurent Vanoverberghe, Lucia Garcia-Aranda, David Ryckelynck, Yvan Chastel. Anticipation of gears distortions caused by heat treatments. 10th ESAFORM Conference on Material Forming, Apr 2007, Zaragona, Spain. pp.1221-1226, ⟨10.1063/1.2729681⟩. ⟨hal-00522096⟩
  • L. Berthe, M. Boustie, Sophie Barradas, M. Arrigoni, C. Bolis, et al.. Avancées du test d'adhérence par choc laser LASAT. 2ème Forum de l'Institut Laser Plasma, Mar 2007, Arcachon, France. ⟨hal-00274030⟩
  • Graciela Bertolino, Daniel Caldemaison, Jerome Crepin, Marie Dexet, Eva Heripre. EBSD : a major device for mechanical characterization of polycrystalline materials. Electron Back diffraction Meeting 2007, Mar 2007, New Lanark, United Kingdom. ⟨hal-00139725⟩
  • Maxime Sauzay, Michel Mottot, Benjamin Fournier, Christel Caës, Michel Noblecourt, et al.. Fatigue with hold time : austenitic stainless steels and martensitic steels. 26 èmes journées de printemps - JP 2007, 2007, Paris, France. 22 p. ⟨hal-00165823⟩
  • Alain Köster, Vincent Maurel, Luc Rémy. Analyse des gradients de température dans une éprouvette FMT et influence sur la qualité et la robustesse des modèles anisothermes. 26 èmes journées de printemps - JP 2007, 2007, Paris, France. 8 p. ⟨hal-00165822⟩
  • Fabien Szmytka, Habibou Maitournam, Luc Rémy, Alain Köster, Myriam Bourgeois, et al.. Comportement élastoviscoplastique d'une fonte GS et son intégration numérique. Huitième colloque national en calcul des structures, 2007, Giens, France. pp.283-288. ⟨hal-00159703⟩
  • Simon Bouteleux, C Gérard, Brigitte Bacroix, Michel Bornert, Renald Brenner, et al.. A numerical evaluation of various scale transition rules for uniform field models. 17th International Workshop of Computational Mechanics of Materials, 2007, Paris, France. ⟨hal-00178234⟩
  • Yuji Ichikawa, Kazuhiro Ogawa, Mariette Nivard, Laurent Berthe, M. Boustie, et al.. Adhesion study of cold-sprayed CoNiCrAlY-Mo coating of inconel 625 using the Laser Shock Adhesion Test (LASAT). Thermec 2006, 2007, Vancouver, Canada. pp.1086-1091. ⟨hal-00149377⟩
  • Sophie Barradas, Michel Jeandin, Régine Molins, François Borit, Laurent Berthe, et al.. Local approach to thermally-sprayed coating/substrate adhesion through LASAT (Laser Shock Adhesion Test). Thermec 2006, 2007, Vancouver, Canada. pp.1067-1073. ⟨hal-00149361⟩
  • Samuel Forest. The micromorphic approach to plasticity and diffusion. International symposium on continuum models and discrete systems, 2007, Paris, France. pp.105-111. ⟨hal-00284797⟩
  • André Pineau. Statistics of brittle cleavage fracture in steels. International symposium on continuum models and discrete systems, 2007, Paris, France. pp.197-212. ⟨hal-00284805⟩
  • Michel Boussuge. An originial micro/macro approach of the mechanical behaviour of high zirconia fused-cast refractories. Unified international technical conference on refractories-10th biennial worldwide congress united european refractories meet the world, 2007, Dresden, Germany. pp.48-51. ⟨hal-00192920⟩
  • C Gérard, Brigitte Bacroix, Michel Bornert, Renald Brenner, Georges Cailletaud, et al.. Étude expérimentale et simulation numérique, au moyen de modèles de plasticité cristalline, de chargements non proportionnels.. 18eme Congrès Francais de Mécanique, 2007, Grenoble, France. pp.CD-Rom. ⟨hal-00177927⟩
  • S. Amélio, Jean-Dominique Bartout, Yves Bienvenu. Solid state bonding of Al/Ag/Al foils. Brazing, high temperature brazing and diffusion welding, 2007, Aix La Chapelle, Germany. pp.72-77. ⟨hal-00183208⟩
  • Fouad El Houdaigui, Samuel Forest, Anne-Françoise Gourgues, Dominique Jeulin. On the size of the representative volume element for isotropic elastic polycrystalline copper. IUTAM symposium on mechanical behavior and micro mechanics of nanostructured materials, 2007, Beijing, China. pp.171-180. ⟨hal-00148578⟩
  • Jean-Loup Strudel. Nickel-base superalloys – an engineering and scientific challenge. Frontiers in the design of materials, 2007, pp.195-209. ⟨hal-00148589⟩
  • C Gérard, Brigitte Bacroix, Michel Bornert, Renald Brenner, Georges Cailletaud, et al.. Study of non-proportionnal loading paths : comparison between experimental results and simulations performed by finite element and homogenized models. 17th International Workshop of Computational Mechanics of Materials, 2007, Paris, France. ⟨hal-00178238⟩
  • Fabien Szmytka, Luc Rémy, Habibou Maitournam, Alain Köster, Myriam Bourgeois, et al.. Mise en point d'un nouveau modèle de comportement élasto-viscoplastique. Application au dimensionnement à la fatigue d'un collecteur d'échappement de moteur diesel en fonte. 26 èmes journées de printemps - JP 2007, 2007, Paris, France. 8 p. ⟨hal-00165827⟩
  • Andrei Musienko, Nikolay Osipov, Georges Cailletaud. Une famille d'algorithmes robustes pour l'intégration de modèles de plasticité cristalline. Huitième colloque national en calcul des structures, 2007, Giens, France. pp.271-276. ⟨hal-00159693⟩
  • Takeshi Iwamoto, Mohammed Cherkaoui, Esteban P. Busso. A numerical investigation of interface dynamics during martensitic transformation in a shape memory alloy using the level-set method. 8th Asia-Pacific symposium on Engineering Plasticity and Its Applications, Sep 2006, Nagoya, Japan. pp.1199-1204, ⟨10.4028/www.scientific.net/KEM.340-341.1199⟩. ⟨hal-00202812⟩
  • Olivier Amsellem, François Borit, Vincent Guipont, Michel Jeandin, F. Pauchet. A composite approach to Al2O3 based plasma-sprayed coatings. Proceedings of the 20th International conference on surface modification technologies, Sep 2006, Vienne, Austria. pp.30-34. ⟨hal-00182981⟩
  • Charlotte Bouchet, Benoit Tanguy, Jacques Besson, André Pineau, Stéphane Bugat. Transferability of cleavage fracture parameters between notched and cracked geometries. Fracture of nano and engineering materials and structures - ECF 16, Jul 2006, Alexandroupolis, Greece. 10 p. ⟨hal-00142205⟩
  • Lucien Laiarinandrasana, Gilles Hochstetter, Mélanie Lafarge. Fracture mechanics of PVDF polymeric material : specimen geometry effects. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 8 p. ⟨hal-00151555⟩
  • Lucien Laiarinandrasana, Amine Bennani, Sabine Cantournet, Roland Piques. Multiaxial fatigue crack initiation on filled rubbers : statistical aspects. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 8 p. ⟨hal-00146244⟩
  • Thanh Trung Luu, Benoit Tanguy, Jacques Besson, André Pineau, G. Perrin. Unified constitutive equations to describe elastoplastic and damage behavior of an X100 linepipe steel. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 12 p. ⟨hal-00146318⟩
  • Raphael Salapete, Bruno Barlas, G. Morin, D. Massinon, Georges Cailletaud, et al.. Modelling of fatigue damage in aluminum cylinder heads. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 9 p. ⟨hal-00146324⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, G. Richard, André Pineau. Brittle fracture in heat-affected zones of girth welds of modern line pipe steel (X100). Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 7 p. ⟨hal-00146312⟩
  • S.R. Bordet, Benoit Tanguy, Stéphane Bugat, D. Moinereau, André Pineau. Cleavage fracture micromechanisms related to WPS effect in RPV steel. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 8 p. ⟨hal-00146314⟩
  • Jeanne Belotteau, Clotilde Berdin, Samuel Forest, Aurore Parrot, Claude Prioul. Mechanical behavior modeling in the presence of strain aging. Fracture of nano and engineering materials and structures, ECF 16, Jul 2006, Alexandroupolis, Greece. 8 p. ⟨hal-00832996⟩
  • François Grillon. La maintenance et le contrôle du microscope électronique à balayage et de son système de microanalyse X. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.749-758. ⟨hal-00359349⟩
  • François Grillon. L'assurance qualité et la normalisation. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.759-765. ⟨hal-00359350⟩
  • François Grillon. Les détecteurs utilisés dans le microscope électronique à balayage. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.183-206. ⟨hal-00359337⟩
  • Alain Jadin, Maria Betbeder. Les matériaux isolants. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.645-652. ⟨hal-00359346⟩
  • Francine Roussel-Dherbey, Frédéric Charlot, François Grillon. Guide d'utilisation pratique du microscope électronique à balayage. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.233-242. ⟨hal-00359343⟩
  • François Grillon, Frédéric Charlot. Le MEB STEM. Ecole d'été de Saint Martin d'Hères, Jun 2006, Saint Martin d'Hères, France. pp.733-736. ⟨hal-00359348⟩
  • Lucien Laiarinandrasana, Jacques Besson, Gilles Hochstetter, Mélanie Lafarge, O. Delcroix. Experimental investigation and modelling of damage in semi-crystalline polymers. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.403-408. ⟨hal-00150016⟩
  • Julie Maisonneuve, Christophe Colin, Yves Bienvenu, Pascal Aubry. Etude des phénomènes thermiques associés à la fabrication directe de pièces en TA6V par projection laser. Matériaux 2006, 2006, Dijon, France. 12 p. ⟨hal-00144488⟩
  • Benoit Tanguy, Jacques Besson, Stéphane Bugat. Modelling of irradiation embrittlement in the ductile to brittle transition range for an A508 pressure vessel steel. 2006 ASME pressure vessels and piping division conf., 2006, Vancouver, Canada. 8 p. ⟨hal-00151580⟩
  • Olivier Mario, Sébastien Joannès, Jacques Renard, Vladimir Gantchenko. Influence de la microstructure sur les propriétés mécaniques des joints collés. Matériaux 2006, 2006, Dijon, France. 7 p. ⟨hal-00144495⟩
  • Bénédicte Bonnet, Alain Thionnet, Jacques Renard. Matériaux composites soumis à de grandes vitesses de sollicitation. Matériaux 2006, 2006, Dijon, France. 10 p. ⟨hal-00144371⟩
  • Christophe Courcier, Vincent Maurel, Luc Rémy, A. Phelippeau. Evolution de la porosité interfaciale et écaillage induit par oxydation dans un système barrière thermique. Matériaux 2006, 2006, Dijon, France. 8 p. ⟨hal-00144445⟩
  • Arnaud Longuet, Christophe Colin, P. Peyre, Stéphane Quilici, Georges Cailletaud. Modélisation de la fabrication directe de pièces par projection laser : application au Ti-6Al-4V. Matériaux 2006, 2006, Dijon, France. 11 p. ⟨hal-00144465⟩
  • Valérie Lebreton, F. Barbeau, Yves Bienvenu. Precipitation in CuNi15wt%Sn8wt% and CuNi6wt%Si1.8wt% alloys. International conference Copper'06, 2006, Compiègne, France. pp.86-92. ⟨hal-00150138⟩
  • Christian Colin, Michel Boussuge, Michel Beauvy. Fluage en flexion du dioxyde d'uranium après irradiation aux ions. Matériaux 2006, 2006, Dijon, France. 6 p. ⟨hal-00144395⟩
  • Jérome Rossignol, Alain Thionnet. Détection de ruptures de fibres au sein d'un composite unidirectionnel à l'aide d'un circuit micro-onde résonant. Matériaux 2006, 2006, Dijon, France. 9 p. ⟨hal-00144539⟩
  • Alain Thionnet, C. Martin. Une nouvelle méthode constructive des lois de comportement des matériaux composites à l'aide de la théorie des invariants. Matériaux 2006, 2006, Dijon, France. 9 p. ⟨hal-00144559⟩
  • J. Belotteau, Clotilde Berdin, Samuel Forest, A. Parrot, Claude Prioul. Strain aging and prediction of ductile fracture of C-Mn steels. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.187-192. ⟨hal-00149995⟩
  • Norbert Germain, Jacques Besson, Frédéric Feyel. Nonlocal description of the damage and failure of stratified composites. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.361-366. ⟨hal-00150136⟩
  • Yann Duplessis Kergomard, C. Landry, Jacques Renard, Alain Thionnet. Etude expérimentale et numérique de l'initiation du délaminage de bord libre dans les structures composites stratifiées. Matériaux 2006, 2006, Dijon, France. 11 p. ⟨hal-00144450⟩
  • Esteban P. Busso. Multi-scale links in constitutive formulations for materials with heterogeneous microstructures, a micro-mechanics perspective. 4th european solid mechanics conference, 2006, Budapest, France. 2 p. ⟨hal-00146234⟩
  • Thanh Trung Luu, Benoit Tanguy, Jacques Besson, André Pineau, G. Perrin. Rupture ductile d'un acier haute résistance X100 pour transport de gaz naturel : caractérisation et simulation. Matériaux 2006, 2006, Dijon, France. 13 p. ⟨hal-00144467⟩
  • Faycal Sadi, Yves Bienvenu, Pierre Bertrand. Microstructure/tensile properties relationships in Cu-Ni-Sn alloys. International conference Copper'06, 2006, Compiègne, France. pp.295-300. ⟨hal-00150143⟩
  • Aurélie Deraisme, Yves Bienvenu, Gérard Frot, Jean-Noël Barrandon. An experimental study of transient liquid phase bonding in the silver-copper system : to understand the craftsmanship of ancient silver forgeries. International conference Copper'06, 2006, Compiègne, France. pp.288-294. ⟨hal-00150163⟩
  • Kamel Madi, Samuel Forest, Dominique Jeulin, Michel Boussuge. Estimating RVE sizes for 2D/3D viscoplastic composite materials. Matériaux 2006, 2006, Dijon, France. 12 p. ⟨hal-00144481⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, André Pineau. Microstructures and mechanical properties of simulated heat affected zone in X100 pipeline steel girth welds. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.135-140. ⟨hal-00142204⟩
  • M. Ducos, B. Bossuat, H. Walaszek, Sophie Barradas, Michel Jeandin. Ultra-sonic testing of the splat-substrate interface. 2006, Seattle, United States. 6 p. ⟨hal-00146334⟩
  • Benoit Tanguy, Charlotte Bouchet, S.R. Bordet, Jacques Besson, André Pineau. Toward a better understanding of the cleavage in RPV steels : local mechanical conditions and evaluation of a nucleation enriched Weibull model and of the Beremin model over a large temperature range. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.129-134. ⟨hal-00150008⟩
  • Matthieu Mazière, Jacques Besson, Samuel Forest, Benoit Tanguy. Influence of spin-softening and non linear material behaviour on the stability of rotating discs. 6th european solid mechanics conference, 2006, Budapest, Hungary. 2 p. ⟨hal-00151565⟩
  • Nikolay Osipov, Anne-Françoise Gourgues-Lorenzon, Georges Cailletaud, Olivier Diard, Bernard Marini. Numerical generation and study of synthetic bainitic microstructures. Matériaux 2006, 2006, Dijon, France. 12 p. ⟨hal-00144530⟩
  • Julien Mercier, Anthony R. Bunsell, Philippe Castaing, Jacques Renard. Characterisation and modelling of aging of composites. Matériaux 2006, 2006, Dijon, France. 8 p. ⟨hal-00144507⟩
  • Lucien Laiarinandrasana, Amine Bennani, Sabine Cantournet, Roland Piques. Local approach used on filled rubbers multiaxial fatigue crack initiation assessment. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.397-402. ⟨hal-00150010⟩
  • Sébastien Blassiau, Anthony R. Bunsell, Alain Thionnet. Procédé multiéchelle pour la reconstruction des courbes d'émission acoustique révélatrices des ruptures de fibres au sein d'un composite unidirectionnel. Matériaux 2006, 2006, Dijon, France. 11 p. ⟨hal-00144368⟩
  • C.I. Sarafoglou, D.I. Pantelis, François Borit, Vincent Guipont, Michel Jeandin. Air plasma sprayed titanium coatings produced using different oxidation conditions. Surface modification technologies XVIII, 2006, Dijon, France. pp.119-125. ⟨hal-00146350⟩
  • Mélissa Delqué, Nicole de Dave, François Borit, Vincent Guipont, Michel Jeandin, et al.. Nanoindentation combined with atomic force microscopy of HPRPS wear resistant Ti-based composite coatings. Surface modification technologies XVIII, 2006, Dijon, France. pp.341-346. ⟨hal-00146354⟩
  • Thomas Dick, Georges Cailletaud. Numerical modelling in fretting of Ti6Al4V including crystal plasticity. 2006, Tarbes, France. pp.75-84. ⟨hal-00149379⟩
  • M. Boustie, M. Arrigoni, J. Jerome, Laurent Berthe, C. Bolis, et al.. The flier laser shock adhesion test as an extension of the LASAT test for thick coating/substrate systems. Surface modification technologies XVIII, 2006, Dijon, France. pp.271-275. ⟨hal-00146233⟩
  • A. Stern, J.C. Brachet, V. Maillot, Françoise Barcelo, René R, R.C. Maury, et al.. Influence de la teneur en oxygène sur la microstructure et le comportement mécanique de la phase « ex bêta » résultant de l'oxydation à haute température (1000-1200°C) du zircaloy 4. Matériaux 2006, 2006, Dijon, France. 10 p. ⟨hal-00144551⟩
  • Nicolas Marchal, Samuel Forest, Luc Rémy, Steve Duvinage. Simulation of fatigue crack growth in single-crystal superalloys using local approach to fracture. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.353-358. ⟨hal-00150004⟩
  • Elodie Sorlier, Christophe Colin, Hedi Sellami, Alfazazi Dourfaye. Elaboration de gradients de composition continue dans des taillants PDC. Matériaux 2006, 2006, Dijon, France. 9 p. ⟨hal-00144546⟩
  • Edwige Yeugo-Fogaing, Marc Huger, Thierry Chotard, Christian Gault. Caractérisation de l'endommagement d'origine thermique de réfractaires de type électrofondu par techniques acoustiques à haute température. Matériaux 2006, 2006, Dijon, France. 7 p. ⟨hal-00144564⟩
  • Magalie Ménard, Marion Le Flem, Lionel Gélébart, Michel Boussuge. Evolution des propriétés mécaniques du carbure de silicium sous irradiation aux ions. Matériaux 2006, 2006, Dijon, France. 5 p. ⟨hal-00144501⟩
  • Thanh Trung Luu, Benoit Tanguy, Jacques Besson, André Pineau, G. Perrin. Local approach based numerical modeling of fracture of high strength modern pipeline steel. Local approach to fracture, EUROMECH-MECAMAT 2006, 9th European Mechanics of Materials Conference, 2006, Moret sur Loing, France. pp.253-258. ⟨hal-00150006⟩
  • Aurélie Deraisme, Yves Bienvenu, T. Dupuy. Interdiffusion in the copper-zinc system : microstructure development and mechanical behaviour of composite wires. International conference Copper'06, 2006, Compiègne, France. pp.240-247. ⟨hal-00150150⟩
  • Yann Duplessis Kergomard, C. Landry, Jacques Renard, Alain Thionnet. Design of long fibres laminated composite structures. ECCM 12, 2006, Biarritz, France. 9 p. ⟨hal-00146243⟩
  • Virginie Moreno-Lucas, Michel Boussuge. Simulations expérimentale et numérique de réfractaires verriers électrofondus riches en zircone. Matériaux 2006, 2006, Dijon, France. 6 p. ⟨hal-00144512⟩
  • S. Bansard, K.A. Khor, François Borit, Vincent Guipont, Michel Jeandin, et al.. Investigation of the interface strength of hydroxyapatite coating by the LASAT (Laser shock adhesion test) method. ITSC 2006 Building on 100 years of success, 2006, Seattle, United States. 6 p. ⟨hal-00146228⟩
  • Alexandre Dalloz, Anne-Françoise Gourgues-Lorenzon, André Pineau, Jacques Besson, T. Sturel. Influence of the cutting process on damage in dual phase steels, in : Local approach to fracture. EUROMECH-MECAMAT 2006, 9th European mechanics of materials conference, 2006, Moret sur Loing, France. pp.265-270. ⟨hal-00146241⟩
  • Dimitris K. Christoulis, D.I. Pantelis, François Borit, Vincent Guipont, Michel Jeandin. Effect of substrate roughness and temperature on splat formation in plasma sprayed aluminium bronze. Surface modification technologies XVIII, 2006, Dijon, France. pp.73-83. ⟨hal-00146345⟩
  • Kamel Madi, Samuel Forest, Michel Boussuge, Sylvain Gailliègue, E. Lataste, et al.. Influence de la morphologie tridimensionnelle sur le comportement mécanique de réfractaires électrofondus. Matériaux 2006, 2006, Dijon, France. 10 p. ⟨hal-00144475⟩
  • Faycal Sadi, Yves Bienvenu, Pierre Bertrand. Etude de la recristallisation du bronze Cu-6(%masse) SnP. International conference Copper'06, 2006, Compiègne, France. pp.50-55. ⟨hal-00150141⟩
  • C Gérard, Brigitte Bacroix, Michel Bornert, Renald Brenner, Georges Cailletaud, et al.. Experimental study and numerical simulation of non proportional loading paths using finite element crystal plasticity. 16th International Workshop of Computational Mechanics of Materials, 2006, Lublin, Poland. ⟨hal-00178266⟩
  • Stéphanie Graff, Samuel Forest, Jean-Loup Strudel, Claude Prioul, J.L. Béchade. Caractérisation et modélisation des phénomènes de vieillissement dans les alliages de zirconium. Matériaux 2006, 2006, Dijon, France. 5 p. ⟨hal-00144463⟩
  • C Gérard. Mesures de champs et identification de modèles de plasticité cristalline. Colloque National MECAMAT, 2006, Aussois, France. ⟨hal-00177914⟩
  • S. Deyber, Franck Alexandre, J. Vaissaud, André Pineau. Probabilistic life of DA 718 for aircraft engine disks. Superalloys 718, 625, 706 and derivatives, Oct 2005, Pittsburgh, United States. 14 p. ⟨hal-00833002⟩
  • Benoit Berini, Djaffar Boussaa, Pierre Suquet, Myriam Bourgeois, Alexandra Marie-Louise. Modélisation micromécanique du comportement thermoviscoplastique anisotherme cyclique de CMM Al2/Al2O3. 17e Congrès Français de Mécanique (CFM 2005), Aug 2005, Troyes, France. ⟨hal-04091636⟩
  • Yves Bienvenu, Sandrine Rodrigues. Fabrications de poudres métalliques à partir de déchets pulvérulents. Poudres et matériaux frittés 2005, May 2005, Cherbourg, France. 6 p. ⟨hal-00151372⟩
  • Amine A. Benzerga, Jacques Besson, André Pineau. How much input is nedded from the microstructure to model ductile fracture?. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00157684⟩
  • Grégory Odemer, Gilbert Hénaff, Bertrand Journet, Luc Rémy, Nader Haddar, et al.. Damage tolerance issues peculiar to supersonic civil transport aircraft. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00159021⟩
  • Charlotte Bouchet, Félix Arnoldi, Jacques Besson, Suzanne Degallaix, Valérie Denner, et al.. Benchmark on the determination of the cleavage triggering sites in a RPV steel in the DBT range. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00157709⟩
  • Norbert Germain, Frédéric Feyel, Jacques Besson. Nonlocal computational methods applied to composites structures. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00157711⟩
  • A.M. Alam, Luc Rémy. A lifetime prediction model for single crystal superalloys subjected to thermomechanical creep-fatigue-oxidation damage. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00157695⟩
  • A.A. Benzerga, Jacques Besson, André Pineau. Recent advances in modelling ductile rupture. International conference of fracture, Mar 2005, Turin, Italy. 6 p. ⟨hal-00157660⟩
  • Nicolas Marchal, Sylvain Flouriot, Samuel Forest, Luc Rémy. Numerical simulations of crack tip stress-strain fields in single crystal nickel-base superalloys at high temperature under creep-fatigue loadings. International conference of fracture, 2005, Turin, Italy. 6 p. ⟨hal-00159008⟩
  • Benoit Tanguy, Jacques Besson, André Pineau. Contribution pour une meilleure compréhension de l'essai Charpy. Colloque national Mecamat, 2005, Aussois, France. 8 p. ⟨hal-00160366⟩
  • Sophie Barradas, Régine Molins, Michel Jeandin, M. Arrigoni, M. Boustie, et al.. Laser shock flier impact simulation of particle-substrate interactions in cold spray. ITSC 2005 Thermal spray connects : explore its surfacing potential, 2005, Basel, Switzerland. 7 p. ⟨hal-00159062⟩
  • Anthony R. Bunsell, Sébastien Blassiau, Alain Thionnet. A methodology for the control of the residual lifetimes of carbon fibre reinforced composite pressure vessels. ICCM 15, International conference on composite materials, 2005, France. 10 p. ⟨hal-00143725⟩
  • Norbert Germain, Jacques Besson, Frédéric Feyel. Méthodes de calcul non local : application aux structures composites. Septième colloque national en calcul des structures, 2005, Giens, France. pp.135-140. ⟨hal-00160206⟩
  • Nathalie Chérault, Jacques Besson, C. Goldberg, N. Casanova, Marie-Hélène Berger. Finite element simulation of thermomechanical stress evolution in Cu/low-k interconnects during manufacturing and subsequent thermal cycling. ESSDERC 2005, 2005, Grenoble, France. pp.493-496, ⟨10.1109/ESSDER.2005.1546692⟩. ⟨hal-00151387⟩
  • Frédéric Bron, Jacques Besson. Ductile tearing of 2024 aluminum alloy panels. International conference of fracture, 2005, Turin, Italy. 6 p. ⟨hal-00157715⟩
  • Sophie Boileau, Vincent Guipont, Michel Jeandin, Mariette Nivard, Laurent Berthe, et al.. The laser shock adhesion test (LASAT) for production control of thermally sprayed ceramic coatings. ITSC 2005 Thermal spray connects : explore its surfacing potential, 2005, Basel, France. 6 p. ⟨hal-00159080⟩
  • Sébastien Blassiau, Alain Thionnet, Anthony R. Bunsell. Analyse tridimensionnelle des micromécanismes de transfert de charge dans les composites fibres/résine. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.507-515. ⟨hal-00157280⟩
  • Yann Duplessis Kergomard, Alain Thionnet, Jacques Renard, Hubert Mallard. Dimensionnement des structures en composite stratifé à fibres longues. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.575-581. ⟨hal-00157267⟩
  • Paul-André Meury, Régine Molins, A. Gosset. Définition d'un nouvel alliage métallique pour la réalisation d'étalons de masses secondaires. 12ème congrès international de métrologie, 2005, Lyon, France. 5 p. ⟨hal-00160219⟩
  • Anne-Sophie Bilat, Anne-Françoise Gourgues-Lorenzon, Jacques Besson, André Pineau. Critères d'amorçage et de propagation des fissures dans les zones affectées thermiquement de canalisations à haute résistance – X100. Colloque national Mecamat, 2005, Aussois, France. 4 p. ⟨hal-00160362⟩
  • Christophe Colin, Jean Marc Chretien. Rechargement de composants turbine à gaz par explosion thermique. Poudres et matériaux frittés 2005, 2005, Cherbourg, France. 7 p. ⟨hal-00151381⟩
  • Valérie Lebreton, Faycal Sadi, Yves Bienvenu. Continuous casting of tin containing alloys and their transformation. Continuous casting 2005, 2005, 6 p. ⟨hal-00151561⟩
  • Benjamin Fournier, Maxime Sauzay, Michel Mottot, Hélène Brillet, Isabelle Monnet, et al.. Experimentally based modelling of cyclically induced softening in a martensitic steel at high temperature. ECCC Creep conference, 2005, London, United Kingdom. pp.649-661. ⟨hal-00160195⟩
  • Sébastien Blassiau, Alain Thionnet, Anthony R. Bunsell. Prédiction de la contrainte de rupture de composites unidirectionnels et suivi de l'accumulation de ruptures de fibres. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.1135-1142. ⟨hal-00157284⟩
  • Géraldine Perrin, Christophe Colin, Yves Bienvenu, V. Zerrouki, C. Braham. Caractérisation des défauts de perçage en fatigue oligocyclique sur pièce en Inconel 718. 24èmes Journées de Printemps SF2M, Fatigue et Etat de Surface, 2005, Senlis, France. ⟨hal-00312690⟩
  • Lucien Laiarinandrasana, Amine Bennani, Sabine Cantournet, Y. Bomal. Mechanical behaviour and fatigue lifetime of natural rubber reinforced by two grades of precipitated silica. 4th European conference for constitutive models for rubber, 2005, Stockholm, Sweden. pp.109-114. ⟨hal-00159552⟩
  • Jacques Besson, Vincent Gaffard, Anne-Françoise Gourgues-Lorenzon. Modelling high temperature creep flow, damage, and fracture behaviour of 9Cr1Mo-NbV steel weldments. ECCC Creep conference, 2005, London, United Kingdom. pp.758-771. ⟨hal-00160200⟩
  • Julien Mercier, Anthony R. Bunsell, Hubert Mallard, Jacques Renard. Caractérisation et modélisation du vieillissement de matériaux composites. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.1175-1183. ⟨hal-00157274⟩
  • Sabine Cantournet, Khaled Layouni, Lucien Laiarinandrasana, Roland Piques, K. Legorju, et al.. Constitutive modelling of compressibility induced by damage in carbon black reinforced natural rubber. 4th European conference for constitutive models for rubber, 2005, Stockholm, Sweden. pp.599-604. ⟨hal-00159550⟩
  • Bénédicte Bonnet, Alain Thionnet, Jacques Renard, Eric Bonneau. Caractérisation et modélisation dissipatifs au sein de composites verre/polypropylène soumis à des sollicitations quasi-statiques et dynamiques. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.885-893. ⟨hal-00157263⟩
  • Alain Thionnet, C. Martin. Une nouvelle méthode constructive des lois de comportement des matériaux composites à l'aide de la théorie des invariants. Quatorzièmes journées nationales sur les composites, 2005, Compiègne, France. pp.719-727. ⟨hal-00157270⟩
  • Florian Cacho, S. Orain, Georges Cailletaud, Herve Jaouen. A constitutive single crystal model for the silicon mechanical behavior : applications to the stress induced by silicided lines and STI in MOS technologies. Proceedings of the 6th International Conference on Thermal, Mechanical and Multi-Physics Simulation and Experiments in Micro-Electronics and Micro-Systems, 2005. EuroSimE 2005., 2005, pp.635 - 640, ⟨10.1109/ESIME.2005.1502880⟩. ⟨hal-00157586⟩
  • Faouzi Hadj Hassen, Yves Bienvenu, J.F. Noirel, M. Metz. Long term stability analysis of cast iron shaft linings after coal mine closure and flooding. Post-mining 2005, 2005, Nancy, France. 10 p. ⟨hal-00151544⟩
  • Vincent Gaffard, Jacques Besson, Anne-Françoise Gourgues-Lorenzon. Creep failure model of a 9Cr1Mo-NvV (P91) steel integrating multiple deformation and damage mechanisms. Advanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p. ⟨hal-00165064⟩
  • Lucien Laiarinandrasana, Moulay Kabiri. Specimen geometry effects on 316L(N) creep crack growth analyses. Advanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p. ⟨hal-00165077⟩
  • Mélanie Challier, Jacques Besson, Lucien Laiarinandrasana, Roland Piques, Gilles Hochstetter, et al.. Damage and fracture of PVDF at 20°C. Advanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p. ⟨hal-00165054⟩
  • Charlotte Bouchet, Benoit Tanguy, Jacques Besson, Stéphane Bugat. Local approach to fracture based prediction of the ∆T56J and ∆T K1C100 shifts due to irradiation for an A508 pressure vessel steel. Advanced fracture mechanics for life and safety assessments - ECF 15, Aug 2004, Stockholm, Sweden. 8 p. ⟨hal-00165043⟩
  • Sébastien Beauvais, Vincent Guipont, Franck N'Guyen, Michel Jeandin, Dominique Jeulin, et al.. Study of the porosity in plasma-sprayed alumina through an innovative 3-dimensional simulation of the coating build-up. ITSC 2004 - International thermal spray conference, May 2004, Osaka, Japan. 8 p. ⟨hal-00164156⟩
  • Laurent Germann, D. Banerjee, J.Y. Guedou, Jean-Loup Strudel. Microstructure-property relationships in newly developed multiphase Ti2AlNb based titanium aluminides. 10th World conference on titanium, 2004, Hamburg, Germany. pp.2137-2144. ⟨hal-00151406⟩
  • Andrei Musienko, Georges Cailletaud, Olivier Diard. Damage, opening and sliding of grain boundaries. IUTAM Symposium on Multiscale modeling and characterization of elastic-inelastic behavior of engineering materials, 2004, Marrakech, Morocco. pp.149-156. ⟨hal-00157645⟩
  • Florian Cacho, Georges Cailletaud, Régine Molins. Etude et simulation du procédé de siliciuration du nickel pour les applications CMOS. Colloque national MECAMAT 2004 - Ecole de mécanique des matériaux, 2004, Aussois, France. 4 p. ⟨hal-00164545⟩
  • Sébastien Beauvais, Vincent Guipont, Michel Jeandin, Daniel Juvé, D. Treheux, et al.. Study of the influence of microstructure on electric properties of plasma-sprayed aluminia coatings using the scanning electron microscope mirror effect (SEMME) method. ITSC 2004 - International thermal spray conference, 2004, Osaka, Japan. 6 p. ⟨hal-00164148⟩
  • Ludovic Massard, Kamel Madi, Michel Boussuge, Samuel Forest, Edwige Yeugo-Fogaing, et al.. High temperature mechanical behavior of fused cast refractories. 43rd annual conference of metallurgists of CIM, 2004, Hamilton, Canada. pp.631-644. ⟨hal-00165872⟩
  • D. Aime, B. Froment, Florian Cacho, V. Carron, S. Descombes, et al.. Work function tuning dopant scanning and related effects in Ni fully silicided gate fro sub-45nm nodes CMOS. Electron Devices Meeting, 2004. IEDM Technical Digest, 2004, pp.87-90, ⟨10.1109/IEDM.2004.1419073⟩. ⟨hal-00157607⟩
  • Jacques Besson. Application de l'approche locale de la rupture à la simulation de la fissuration des structures : problèmes numériques liés à l'existence d'une longueur interne. Colloque national MECAMAT 2004 - Ecole de mécanique des matériaux, 2004, Aussois, France. 8 p. ⟨hal-00164452⟩
  • Kamel Madi, Samuel Forest, Michel Boussuge. Etude par simulation numérique du comportement mécanique de réfractaires électrofondus à partir de la connaissance de la microstructure. Colloque national MECAMAT 2004 - Ecole de mécanique des matériaux, 2004, Aussois, France. 4 p. ⟨hal-00164546⟩
  • Sébastien Blassiau, Anthony R. Bunsell, Alain Thionnet. Micromechanics, damage and life prediction of carbon fibre composite pressure vessels. ECCM 11, 11th European conference on composite materials, 2004, Rhodes, Greece. 10 p. ⟨hal-00165021⟩
  • M. Ducos, B. Bossuat, H. Walaszek, Sophie Barradas, Michel Jeandin, et al.. Non-destructive adhesion testing of plasma-sprayed coatings using ultrasounds and laser shocks. ITSC 2004 - International thermal spray conference, 2004, Osaka, Japan. 6 p. ⟨hal-00164178⟩
  • Michel Boussuge. Thermomechanical behaviour : from ceramics to refractories. 43rd annual conference of metallurgists of CIM, 2004, Hamilton, Canada. pp.605-616. ⟨hal-00165871⟩
  • Marie-Therese Cabrillat, Magali Reytier, Maxime Sauzay, Michel Mottot, Vincent Gaffard, et al.. Studies on mechanical behavior of MOD 9Cr-1Mo steel, CEA R&D program. 2nd international topical meeting on high temperature reactor technology, 2004, Beijing, China. 13 p. ⟨hal-00159304⟩
  • Esteban P. Busso, Georges Cailletaud, Stéphane Quilici. A multiscale micromechanics approach to describe environmental effects on surface crack initiation under cyclic loading. IUTAM Symposium on Multiscale modeling and characterization of elastic-inelastic behavior of engineering materials, 2004, Marrakech, Morocco. pp.49-57. ⟨hal-00157639⟩
  • Michel Jeandin, Sophie Barradas, M. Arrigoni, M. Boustie, C. Bolis, et al.. Thermay spray and lasers. 2nd international conference on materials processing for properties and performance (MP3), Oct 2003, Yokohama, Japan. pp.527-547. ⟨hal-00166047⟩
  • Thierry Dillard, Franck N'Guyen, Samuel Forest, Yves Bienvenu, Jean-Dominique Bartout, et al.. In-situ observation of tensile deformation of open-cell nickel foams by means of X-ray microtomography. Proceedings of the 3rd International Conference on Cellular Metals and Metal Foaming Technology, Jun 2003, Berlin, Germany. pp.301-306. ⟨hal-01538072⟩
  • A.M. Huntz, L. Maréchal, B. Lesage, Régine Molins. Oxidation of alumina forming materials. High temperature corrosion and materials chemistry IV, Apr 2003, Paris, France. pp.19-32. ⟨hal-00166084⟩
  • F.D. Fischer, Thomas Antretter, J. Keckes, B. Ortner, Georges Cailletaud. Martensitic kinetics for steels under complex thermo-mechanical loading. Plasticity '03 : the tenth international symposium on plasticity and its current applications, 2003, Quebec City, Canada. pp.217-219. ⟨hal-00165875⟩
  • Lakhdar Taleb, Georges Cailletaud, Nacer Debih, Liliana Blaj. Evaluation of a 2M1C model for the description of the ratcheting phenomenon. Plasticity '03 : the tenth international symposium on plasticity and its current applications, 2003, Quebec City, Canada. pp.460-462. ⟨hal-00165877⟩
  • Amine Bennani, Lucien Laiarinandrasana, Roland Piques, Sabine Cantournet. Influence of the filler properties on the mechanical response of silica filled natural rubber. Third european conference on constitutive models for rubber, 2003, London, United Kingdom. pp.177-184. ⟨hal-00164376⟩
  • Khaled Layouni, Lucien Laiarinandrasana, Roland Piques. Compressibility induced by damage in carbon black reinforced natural rubber. Third european conference on constitutive models for rubber, 2003, London, United Kingdom. pp.273-281. ⟨hal-00164380⟩
  • Frédéric Bron, Jacques Besson. A yield function for anisotropic materials application to aluminum alloys. Plasticity '03 : the tenth international symposium on plasticity and its current applications, 2003, Quebec City, Canada. pp.328-330. ⟨hal-00165873⟩
  • Olivier Diard, Sylvain Leclercq, Renaud Masson, Gilles Rousselier, Georges Cailletaud. Evaluation of mean field models and comparison with computations of 3D multicrystalline metallic aggregates. Plasticity '03 : the tenth international symposium on plasticity and its current applications, 2003, Quebec City, Canada. pp.337-339. ⟨hal-00165874⟩
  • Virginie Goussery, Yves Bienvenu, Samuel Forest, Anne-Françoise Gourgues, Christophe Colin, et al.. Grain size effects on the mechanical behaviour of open-cell nickel foams. International conference on cellular metals and metal foaming technology, 2003, Berlin, Germany. pp.419-424. ⟨hal-00165906⟩
  • Thierry Dillard, Franck N'Guyen, Samuel Forest, Yves Bienvenu, Jean-Dominique Bartout, et al.. In-situ observation of tensile deformation of open-cell nickel foams by means of X-ray microtomography. International conference on cellular metals and metal foaming technology, 2003, Berlin, Germany. pp.301-306. ⟨hal-00165898⟩
  • Anne-Françoise Gourgues, Virginie Calonne, Stéphane Bugat. Caractérisation cristallographique par EBSD de la microstructure et de la fissuration des aciers inoxydables austéno-ferritiques moulés. L'analyse EBSD : principes et applications, Dec 2002, Paris, France. pp.101-109. ⟨hal-00165961⟩
  • Vincent Guipont, Régine Molins, Nicole de Dave, Michel Jeandin, Stéphane Coindeau, et al.. Revêtements de TA6V nitrurés in situ par projection plasma réactive. Etude microstructurale et propriétés mécaniques locales. Matériaux 2002, Oct 2002, Tours, France. ⟨hal-01480130⟩
  • Farida Azzouz, Georges Cailletaud, Ronald Foerch, Guillaume Morin, Stéphane Quilici, et al.. Identification of viscoplastic constitutive and creep-fatigue damage coefficients to use in abaqus automotive structural calculations with the zmat library. Abaqus Users’ Meeting, May 2002, Newport, Rhode Island, United States. ⟨hal-04062180⟩
  • Vincent Guipont, Régine Molins, Michel Jeandin, G. Barbezat. Plasma-sprayed Ti-6Al-4V coatings in a reactive nitrogen atmosphere up to 250 kPa. International Thermal Spray Conference (ITSC 2002), Mar 2002, Essen, Germany. pp.247-252. ⟨hal-01480135⟩
  • Francisco Chinesta, Philippe Lorong, David Ryckelynck, Miguel Angel Martinez, Elías Cueto, et al.. Thermomechanical cutting model discretisation: Eulerian or Lagrangian, mesh or meshless?. 5th International ESAFORM Conference on Material Forming, 2002, Krakow, Poland. pp.568-570, ⟨10.3166/ijfp.7.83-97⟩. ⟨hal-00019286⟩
  • David Ryckelynck. A priori model reduction method for thermo-mechanical simulations. Fourth International Conference on Materials Processing Defects (MPD4), 2002, Cachan, France. pp.477-491, ⟨10.3166/ijfp.5.477-491⟩. ⟨hal-00021108⟩
  • O. Diard, S. Leclercq, Gilles Rousselier, Farida Azzouz, G. Cailletaud. Modeling of pellet cladding interaction during power ramps in pressurized water reactors. SMIRT 16, International Association for Structural Mechanics in Reactor Technology, Aug 2001, Washington DC, United States. ⟨hal-04062197⟩
  • T. Junquera, M. Fouaidy, S. Bousson, H. Gassot, J. Lesrel, et al.. Superconducting RF cavity stiffening with thick plasma sprayed copper coating. Cryogenic Engineering Conference - International Cryogenic Materials Conference, Jul 2001, Madison, United States. pp.523-530, ⟨10.1063/1.1472062⟩. ⟨in2p3-00025138⟩
  • Alain Köster, A.M. Alam, Luc Rémy. A physical-base model for life prediciton of single crystal turbine blades under creep-fatigue loading and thermal transient conditions. Temperature fatigue interaction, May 2001, Paris, France. pp.203-212. ⟨hal-00783263⟩
  • D. Banerjee, R.G. Baligidad, Jean-Loup Strudel. Engineering multiphase intermetallics. 3 th International symposium on structural intermetallics, 2001, Jackson Hole, pp.43-52. ⟨hal-00163078⟩
  • H. Gassot, T. Junquera, V. Ji, Michel Jeandin, Vincent Guipont, et al.. A comparative study of mechanical properties and residual stress distributions of copper coatings obtained by different thermal spray processes. International Conference on Surface Technologies 14, Sep 2000, Paris, France. pp.16-23. ⟨in2p3-00010358⟩
  • Farida Azzouz, G. Cailletaud, F.D. Fischer, A. Pineau, K. Tanaka. Study of the martensitic transformation on a Cr-Ni-Mo-Al-Ti steel for different thermomechanical paths. Euromech-Mecamat, Jun 2000, Metz, France. ⟨hal-04085919⟩
  • H. Gassot, A. Caruette, T. Junquera, J.L. Borne, L. Grandsire, et al.. Mechanical issues of SRF niobium cavities coated by thermal sprayed copper. Workshop on RF Superconductivity, Nov 1999, Santa Fe, United States. pp.472-477. ⟨in2p3-00008500⟩
  • F.D. Fischer, T. Antretter, Georges Cailletaud, Farida Azzouz, K. Tanaka, et al.. A micromechanical and experimental reconsideration of the transformation induced plasticity (TRIP) strain rate term.. 4th Int. Conf. on Constitutive Laws for Engineering Materials, Jul 1999, NYU, New York, United States. pp.253-256. ⟨hal-04085921⟩
  • Alain Thionnet, Jacques Renard. Modelling of fatigue behaviour in composite laminates . ICCM 12, Jul 1999, Paris, France. 3 p. ⟨hal-01843126⟩
  • Alain Thionnet, Jacques Renard. Fiber/matrix debonding criterions in SiC/Ti composite numerical and experimental analysis. ICCM 12, Jul 1999, Paris, France. 8 p. ⟨hal-01843135⟩
  • Florence Deleglise, Marie-Hélène Berger, Anthony R. Bunsell. Microstructure and mechanical properties of a nanocomposite oxide system : the Nextel 720 fibre. ICCM 12, Jun 1999, Paris, France. 10 p. ⟨hal-01843197⟩
  • R. Foerch, Farida Azzouz, S. Quilici, Georges Cailletaud. New tools for a simplified access to umat. Abaqus Users's Meeting, May 1999, Chester, United Kingdom. ⟨hal-04087135⟩
  • Rodolphe Le Riche, G Cailletaud, S Canu. Vers un non linéaire matériau. Quatrième colloque national en calcul des structures, CSMA, May 1999, Giens, France. ⟨hal-03650303⟩
  • Yvan Chastel, E. Hudry, Samuel Forest, C. Peytour. Mechanical behaviour of aluminium foams for various deformation paths. Experiment and modelling. International conference on metal foams and porous metal structures, 1999, Bremen, Germany. pp.263-268. ⟨hal-00165880⟩
  • J. Ayache, Alain Thorel, S. Jong Kim, J. Lesueur, K.H. Westmacott, et al.. Growth induced grain boundary plane oscillations in YBa2Cu3$O7 thin film bicrystals. Intergranular and Interphase Boundaries in Materials 9 IIB98, Jul 1998, Prague, Czech Republic. pp.119-122, ⟨10.4028/www.scientific.net/MSF.294-296.119⟩. ⟨in2p3-00002756⟩
  • Alain Köster, Eric Chataigner, Luc Rémy. Thermal fatigue, a useful tool to assess low cycle fatigue damage in superalloys for components experiencing thermal transients. AGARD SMP, Oct 1995, Banff, Canada. pp.8.1-8.8. ⟨hal-00783195⟩
  • Alain Köster, Guy Laurent, Georges Cailletaud, Luc Rémy. Analysis of thermal fatigue tests for superalloy components. Fatigue under thermal and mechanical loading : mechanisms, mechanics and modelling, May 1995, Petten, Netherlands. pp.25-35. ⟨hal-00783215⟩
  • Alain Köster, Eric Fleury, Eric Vasseur, Luc Rémy. Thermal-mechanical fatigue testing. Automation in Fatigue and Fracture: Testing and Analysis, ASTM STP 1231, Jun 1992, Paris, France. pp.563-580. ⟨hal-00783180⟩
  • Georges Cailletaud, Véronique Doquet, André Pineau. Cyclic multiaxial behaviour of an austenitic stainless steel: microstructural observations and micromechanical modelling. Fatigue under biaxial and multiaxial loading, Dec 1991, France. pp131-149. ⟨hal-00116756⟩
  • Véronique Doquet, André Pineau. Multiaxial low-cycle fatigue behaviour of a mild steel. Third International Conference on Biaxial/Multiaxial Fatigue, Dec 1991, Stuttgart, Germany. pp.81-101. ⟨hal-00116753⟩

Posters

  • Clemence Logeais, Cristian Ovalle, Lucien Laiarinandrasana. Approche expérimentale pour la caractérisation des propriétés mécaniques d'un fluorosilicone. DEPOS31 - 31ème Colloque National Déformation des Polymères Solides, Oct 2023, Anglet, France. . ⟨hal-04419702⟩
  • Daniel Irmer, Mohamed Sennour, Lisa T. Belkacemi, F. Sun, Charbel Moussa, et al.. Advanced microscopy techniques for investigation of the precipitation in pre-strained Al-Cu-Mg alloy (AA2024). IMC20 - 20th International Microscopy Congress, Sep 2023, Busan, South Korea. ⟨hal-04354413⟩
  • Andrea Valentina Diaz Colina, Julien Caroux, Yannick Tillier, Laurent Corté. Mechanics of hydrogel fibers and their assemblies for the design of high fatigue strength tissue substitutes. NANOPOL 2023 "Nanostructured Polymers: from precision synthesis to physical properties", Sep 2023, Orléans, France. ⟨hal-04218847⟩
  • Gaultier Lefay, Nicolas Amouroux, Christophe Germain, Grégory Martin, Cristian Ovalle, et al.. Mécanismes et modélisation mécanique du comportement et de la rupture à haute vitesse de tri-couches de matériaux polymères. Ecole d'été MEALOR II - Mécanique de l'Endommagement et Approche LOcale de la Rupture, Aug 2023, Banyuls - sur - Mer, France. . ⟨hal-04420032⟩
  • Abhishek Palchoudhary, Vincent Maurel, Cristian Ovalle, Pierre Kerfriden. A multi-mechanism model for fast characterization of high cycle fatigue of alloys in the presence of process-induced pores. Ecole d'été MEALOR II - Mécanique de l'Endommagement et Approche LOcale de la Rupture, Aug 2023, Banyuls - sur - Mer, France. ⟨hal-04420348⟩
  • Clemence Logeais, Cristian Ovalle, Lucien Laiarinandrasana. Méthode expérimentale pour la mesure du module de compressibilité d'un élastomère. Aussois 2023 - Grandes Transformations : aujourd'hui.. demain, Jan 2023, Aussois, France. . ⟨hal-04419673⟩
  • Abhishek Palchoudhary, Cristian Ovalle, Vincent Maurel, Pierre Kerfriden. A fast Neuber-type finite element simulator to enable deep-learning-based fatigue life predictions from thermographic data. Aussois 2023 - Grandes transformations : aujourd'hui.. demain, Jan 2023, Aussois, France. ⟨hal-04420315⟩
  • Guilherme Basso Della Mea, Etienne Decencière, Petr Dokládal, Lucien Laiarinandrasana, Cristian Ovalle. Physics-Informed Deep Learning for the Understanding of Mesostructure Effects on the Mechanical Failure of Reinforced Polymers. Aussois 2023 - Grandes transformations : aujourd'hui.. demain, Jan 2023, Aussois, France. ⟨hal-04419857⟩
  • S Le Berre, I Ramière, David Ryckelynck. Efficient Hyper-Reduction of contact problems treated by Lagrange multipliers. Model Reduction and Surrogate Modeling (MORE), Sep 2022, Berlin, Germany. ⟨hal-04088319⟩
  • C. Palomino-Durand, Pierre Marquaille, Phuong Anh Dang, Gall Maxence, Sophie Norvez, et al.. Fibronectin-Biofunctionalization of chitosan hydrogels. European Society of Biomaterials congress, Sep 2022, BORDEAUX, France. ⟨hal-04448443⟩
  • Damien Artieres, Diogo Goncalves, Serge Pascal, Sylvain Depinoy, Vladimir A. Esin. Microstructure-properties relationship in AISI 316L stainless steel producedby Wire Additive Manufacturing (WAM): experimental study and simulation.". AMETIS International Summer School, Jun 2022, Taglio, France. , 2022. ⟨cea-04482511⟩
  • Geoffrey Celeste, Vincent Guipont, Djamel Missoum-Benziane, Guillaume Kermouche, Sergio Sao Joao, et al.. Investigation of the deformation behavior of agglomerated ceramic powders by cold spray. Rencontres Internationales sur la Projection Thermique (RIPT), Jun 2022, Jülich, Germany. ⟨hal-03738456⟩
  • Cristian Ovalle, P Cloetens, Henry Proudhon, Thilo F. Morgeneyer, Lucien Laiarinandrasana. Nanocavitation distribution and morphology evolution in deformed High Density PolyEthylene (HDPE). 18th International Conference on Deformation, Yield and Fracture of Polymers (DYFP), Apr 2022, Kerkrade, Netherlands. Stichting Materials Technology, DYFP 2022, Book of Abstracts, pp.94, 2022. ⟨hal-03992362⟩
  • Geoffrey Celeste, Vincent Guipont. Étude du comportement de poudres céramiques agglomérées lors de projections dynamiques à l’état solide par le procédé cold spray. Journées Annuelles 2022 du Groupe Français de la Céramique (GFC), Mar 2022, Albi, France. ⟨hal-03624439⟩
  • Lili Wan, Cristian Ovalle, Lucien Laiarinandrasana. Stress heterogeneity effects on the heat build-up of PA11. Colloque National MECAMAT - Mécanique des Matériaux Architecturés, Jan 2022, Aussois (FR), France. ⟨hal-03994820⟩
  • Nathan Odou, C Ovalle, Lucien Laiarinandrasana. Comportement et rupture à une température cryogénique d’un polyéthylène à ultra-haute masse molaire. 30ème Colloque national sur la DEformation des Polymères Solides - DEPOS30, Sep 2021, La Napoule, Alpes-Maritimes, France. . ⟨hal-03510501⟩
  • Clément Cadet, Jacques Besson, Sylvain Flouriot, Samuel Forest, Pierre Kerfriden, et al.. Étude de la rupture ductile par homogénéisation numérique de matériaux avec une répartition aléatoire de défauts. Colloque National Mecamat. Contraintes résiduelles : de nouveaux outils pour de nouveaux défis, Jan 2020, Aussois, France. ⟨hal-03024143⟩
  • Stéphane Gillet, Patrick Aimedieu, Isabelle Jeanneau, Frederic Canevet, Nacera Bedrici, et al.. Investigation on damage mechanisms in both continuous and short fibre reinforced thermoplastic. FD2019, 8th Edition of the international conference on fatigue design, Nov 2019, Senlis, France. FD2019, 8th Edition of the international conference on fatigue design, 2019. ⟨hal-02501071⟩
  • Guillaume Cottin, Vincent Guipont, Vincent Maurel, Emine Bakan, Robert Vassen, et al.. Development of Environmental Barrier Coatings on Ceramic Matric Composites assisted by LASAT (Laser Shock Adhesion Test). HT-CMC, Sep 2019, Bordeaux, France. ⟨hal-02185840⟩
  • Martinus P. Widjaja, Sébastien Joannès, Anthony R. Bunsell, Georg Mair, Alain Thionnet. Modelling an Improved NOL Ring Test Using a Reduced Volume Method for the Characterisation of Composite Cylinders. ICCM 22 - 22nd International Conference on Composite Materials, Aug 2019, Melbourne, Australia. ⟨hal-02316280⟩
  • Louise Briez, Vladimir Esin, Mohamed Sennour, Alain Köster, Jérôme Crépin, et al.. Precipitation map for Al-Cu-Mg alloy (AA2024). 16ème colloque de la société française des microscopies SFµ, Jul 2019, Poitiers, France. ⟨hal-03931028⟩
  • Qiang Chen, Liliana Moniz da Silva Sancho, Gildas Guillemot, Charles-André Gandin, Michel Bellet, et al.. Level-set modelling of Laser Beam Melting process applied to ceramic materials - Comparison with experimental results. , IOP Conference Series : Materials Science and Engineering, 529, 2019, 012002, Joint 5th Int. Conf. on Advances in Solidification Processes (ICASP-5) & 5th Int. Symposium on Cutting Edge of Computer Simulation of Solidification, Casting and Refining (CSSCR-5), Jun 2019, Salzbourg, Austria. ⟨10.1088/1757-899X/529/1/012002⟩. ⟨hal-04293917⟩
  • Pierre-Emmanuel Leger, Mohamed Sennour, Francesco Delloro, François Borit, Antoine Debray, et al.. Advanced TEM Investigation of Interfaces in As-Prepared and Corroded Al-Al2O3 Cold Sprayed Coatings on Steel. 19th International Microscopy Congress, Sep 2018, Sydney, Australia. ⟨hal-03930902⟩
  • Rossen Tchakolov,, Anthony Chesnaud, Francesco Delloro, Alain Thorel, G. Dezanneau. INGénierie et OPtimisation d'INTerfaces de Piles à Combustible à Oxides Solides hautes performances (INGOPINT-PàCOS). GrR 3652 HySPàC Réunion plénière, May 2018, Grenoble, France. ⟨hal-01881191⟩
  • Marc Maisonneuve, Cecilie Duhamel, Catherine Guerre, Jérôme Crépin, I. de Curieres, et al.. Oxydation d’un acier inoxydable 316L ecroui en milieu primaire des reacteurs a eau sous pression. Commission CSC du CEFRACOR - Journées Jeunes Chercheurs 2017, Jun 2017, Beaune, France. 2017. ⟨hal-02419633⟩
  • Stéphane Gillet, Y. Tirel, F. Canevet, P. Dewailly, Lucien Laiarinandrasana, et al.. Etude de l'endommagement d'un composite thermoplastique à fibres continues. Colloque MECAMAT Fatigue des Structures et des Matériaux, Jan 2017, Aussois, France. 4 p., 2017. ⟨hal-01708041⟩
  • Pierre-Alexis Poulet, Sébastien Joannès, Lucien Laiarinandrasana. Multiscale modelling of a highly reinforced thermoplastic composite: from microstructural simulations of the transverse damage kinetics towards engineering structure computations. ECCM 17 - 17th European Conference on Composite Materials, Jun 2016, Munich, Germany. ⟨hal-02062170⟩
  • Judith Wollbrett-Blitz, Clément Larquet, Sébastien Joannès, Rémi Bruant, Christophe Le Clerc, et al.. Multi-axial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing. DEPOS 26 - 26ème congrès sur la déformation des polymères solides, Sep 2015, Brest, France. ⟨hal-02073777⟩
  • François Rasselet, Jacques Renard, Sébastien Joannès, Emilie Roche, Sébastien Pautard. Etude de la cinétique d’endommagement d’un composite à matrice thermoplastique renforcé en fibres courtes de carbone. JNC 19 - 19èmes Journées Nationales sur les Composites, Jun 2015, Lyon, Villeurbane, France. ⟨hal-02062103⟩
  • Judith Wollbrett-Blitz, Alba Marcellan, Sébastien Joannès. Etude du comportement thermo-mécanique des fibres aramides. DEPOS 24 - 24ème congrès sur la déformation des polymères solides, Sep 2012, Lyon, France. ⟨hal-02062324⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin, Christophe Colin, Jean-Dominique Bartout, et al.. Effective properties of architectured materials. 1st International School on Architectured Materials, May 2011, Grenoble, France. 2011. ⟨hal-01713384⟩
  • A. Pagano, S. Honoré, V. Joshi, A. Barbier, Mohamed Sennour, et al.. Nanoparticles as drug delivery device in cancer therapy: investigation of nanodiamond internalization and cellular effects in endothelial and glioblastoma cells. 20th EORTC-NCI-AACR Symposium on Molecular Targets and Cancer Therapeutics, Oct 2008, Geneva, Switzerland, France. 6 (12), pp.40-41, 2008, ⟨10.1016/S1359-6349(08)72056-1⟩. ⟨hal-04161651⟩

Ouvrages (y compris édition critique et traduction)

  • Jacques Besson, Jérémy Bleyer, Sylvia Feld-Payet, Anne-Françoise Gourgues-Lorenzon, Florent Hannard, et al.. MEALOR II Damage Mechanics and Local Approach to Fracture. CERN - European Organization for Nuclear Research, 441 p., 2023, ⟨10.5281/zenodo.10125169⟩. ⟨hal-04288497⟩
  • Georges Cailletaud, Jonathan Cormier, G. Eggeler, Vincent Maurel, Loic Nazé (Dir.). Nickel Base Single Crystals Across Length Scales. Elsevier, 2022, ⟨10.1016/C2018-0-01723-5⟩. ⟨hal-03599703⟩
  • Anthony R. Bunsell, Sébastien Joannès, Alain Thionnet. Fundamentals of Fibre Reinforced Composite Materials: 2nd Edition. CRC Press, Taylor & Francis Group, 2021, 9780367023737. ⟨10.1201/9780429399909⟩. ⟨hal-03462768⟩
  • Dominique Jeulin. Morphological Models of Random Structures. Springer International Publishing, 53, In press, Interdisciplinary Applied Mathematics, 978-3-030-75451-8. ⟨10.1007/978-3-030-75452-5⟩. ⟨hal-03217180⟩
  • Sinisa Dj. Mesarovic, Samuel Forest, Hussein Zbib. Mesoscale models : from micro-physics to macro-interpretation. Sinisa Mesarovic, Samuel Forest, Hussein Zbib. Springer, 2019, 978-3-319-94185-1. ⟨hal-01955892⟩
  • Samuel Forest, Sinisa Dj. Mesarovic, Hussein Zbib. Mesoscale Models: From Micro-Physics to Macro-Interpretation. Springer, 587, 2019, CISM International Centre for Mechanical Sciences, 978-3-319-94186-8. ⟨hal-02266711⟩
  • Georges Cailletaud, Kacem Sai, Lakhdar Taleb. Multi-mechanism modeling of inelastic material behavior. ISTE-Wiley, 2018, 978-1-848-21580-1. ⟨10.1002/9781118845103⟩. ⟨hal-01706989⟩
  • Anthony R. Bunsell. Handbook of properties of textile and technical fibres . ed. A.R. Bunsell. Woodhead Publishing 1052 p., 2018, 9780081012727. ⟨hal-01701027⟩
  • Samuel Forest, Gianpietro del Piero, Pierre Seppecher. Mécanique des milieux continus généralisés . Cepadues, 2017, 2364936098. ⟨hal-01631775⟩
  • Holm Altenbach, Samuel Forest (Dir.). Generalized continua as models for classical and advanced materials. Springer, 2016, 978-3-319-31719-9. ⟨10.1007/978-3-319-31721-2⟩. ⟨hal-01337855⟩
  • Vladislav Yastrebov. Numerical methods in contact mechanics. ISTE/Wiley, 416 p., 2013, 978-1-84821-519-1. ⟨10.1002/9781118647974⟩. ⟨hal-00785235⟩
  • Holm Altenbach, Samuel Forest, Anton Krivtsov (Dir.). Generalized continua as models for materials : with multi-scale effects or under multi-field actions. Springer, 331 p., 2013, 978-3-642-36394-8. ⟨hal-00869586⟩
  • Dominique Francois, André Pineau, André Zaoui. Mechanical behaviour of materials. Vol 2 : Fracture mechanics and damage. Springer, 662 p., 2013, Solid Mechanics and Its Applications, Vol. 58, ISBN 978-0-7923-4895-5. ⟨hal-00785237⟩
  • Dominique Francois, André Pineau, André Zaoui. Mechanical behaviour of materials. Vol 1 : Micro and macroscopic consitutive behaviour. Springer, 646 p., 2012, Solid Mechanics and Its Applications, Vol. 180, ISBN 978-94-007-2545-4. ⟨10.1007/978-94-007-2546-1⟩. ⟨hal-00705681⟩
  • André Pineau, Yves Quéré (Dir.). La métallurgie : science et ingénierie. EDP Sciences, 180 p., 2011. ⟨hal-00585365⟩
  • Fanny Balbaud, Clara Desgranges, Cecilie Duhamel, Loic Marchetti, Régine Molins, et al. (Dir.). Corrosion et protection des matériaux à haute température. Presses Mines ParisTech, 390 p., 2011. ⟨hal-00636612⟩
  • Alain Thorel. Un certain regard sur les matériaux : les relations entre l'élaboration, la microstructure et les propriétés des matériaux. Presses Mines ParisTech, 150 p., 2011. ⟨hal-00636606⟩
  • Olivier Thomas, Anne Ponchet, Samuel Forest (Dir.). Mechanics of nano-objects. Presses Mines, 378 p., 2011. ⟨hal-00675612⟩
  • Jacques Besson, Matthieu Mazière (Dir.). Book of abstracts 2nd International Conference on Material Modelling. Presses Mines, 376 p., 2011. ⟨hal-00659436⟩
  • Dominique Jeulin, Samuel Forest (Dir.). Continuum models and discrete systems : CMDS 11 Proceedings of the International Symposium held in Paris July 30th-August 2nd 2007. Presse des Mines, pp.462, 2008, Sciences de la matière, 9782356710000. ⟨hal-00755167⟩
  • Adnane Boukamel, Lucien Laiarinandrasana, Stephane Méo, Erwan Verron (Dir.). Constitutive models for rubber V. Taylor & Francis Group / Balkema, 460 p., 2008. ⟨hal-00284329⟩
  • Alain Thionnet. Mécanique du point (Cours et travaux dirigés). Editions Ellipses, 2008. ⟨hal-03998701⟩
  • Samuel Forest. Milieux continus généralisés et matériaux hétérogènes. Presses de l'école des mines de paris, 198 p., 2006. ⟨hal-00130669⟩
  • Jacques Besson, Dominique Moinereau, Dirk Steglich. Euromech - Mecamat 2006 : 9th European Mechanics of Materials Conference Local Approach to Fracture. Presse des Mines, 488 p., 2006, Science de la matière, 9782911762734. ⟨hal-00755200⟩
  • Jacques Besson, Anne-Françoise Gourgues-Lorenzon, Noëlle Billon, Sabine Cantournet, Yvan Chastel, et al.. Matériaux pour l'ingénieur. Presses de l'Ecole des Mines de Paris, 390 p., 2006. ⟨hal-00142499⟩
  • Anthony R. Bunsell, Jacques Renard. Fundamentals of fibre reinforced composite materials. IOP, 225 p., 2005. ⟨hal-00160373⟩
  • Jacques Renard (Dir.). Elaboration, microstructure et comportement des matériaux composites à matrice polymère. Hermes, 376 p., 2005. ⟨hal-00160397⟩
  • Jacques Besson, Clotilde Berdin, Stephane Bugat, Frédéric Feyel, Samuel Forest, et al.. Local approach to fracture. Presse des Mines, 430 p., 2004, Science de la matière, 9782911762550. ⟨hal-00755207⟩
  • Alain Thionnet, Christiane Martin, Sophie Barradas. Mécanique et comportements des milieux continus : tome 2 Applications et théorie des invariants. Ellipses, 294 p, 2003. ⟨hal-00169251⟩
  • Alain Thionnet, Christiane Martin. Mécanique et comportements des milieux continus : tome 1 Concepts généraux. Ellipses, 307 p, 2003. ⟨hal-00169253⟩
  • Dominique Francois, André Pineau. From Charpy to present impact testing. Elsevier, pp.483, 2002, 978-0-08-043970-9. ⟨hal-00829609⟩
  • Alain Thionnet, Etienne Coquet, Pierre Lepage. Mécanique du Solide (Cours, exercices et problèmes corrigés). Editions Ellipses, 2001. ⟨hal-03998689⟩
  • Dominique Francois, André Pineau, André Zaoui. Mechanical Behaviour of Materials: Volume II: Viscoplasticity, Damage, Fracture and Contact Mechanics. Kluwer Academic publishers, pp.401, 1998, ⟨10.1007/978-94-017-0498-4⟩. ⟨hal-00112717⟩
  • Jacques Masounave, Michel Suéry, Alain Thorel. Intérêts technologiques et marchés potentiels des composites à matrice métallique : les actes du colloque. Presse des Mines, pp.312, 1997, Science de la matière, 9782911762055. ⟨hal-00755229⟩
  • A. Zaoui (Dir.). IUTAM Symposium on Micromechanics of Plasticity and Damage of Multiphase Materials. Kluwer Academic Publ., 420 p., 1996, 978-94-010-7285-4. ⟨hal-00112726⟩

Chapitres d'ouvrage

  • Samuel Forest, Flavien Ghiglione. Size effects in Cosserat crystal plasticity. Sixty Shades of Generalized Continua, 170, Springer International Publishing, pp.211-234, 2023, Advanced Structured Materials, ⟨10.1007/978-3-031-26186-2_14⟩. ⟨hal-03999984⟩
  • Hugo Launay, François Willot, David Ryckelynck, Jacques Besson. Classification of defects in welded joints. Manifold learning for model reduction in engineering, 2023. ⟨hal-04386052⟩
  • Gamze Çakır Kabakcı, Matthieu Sonar, Özgür Aslan, Emin Bayraktar. Recycled Natural Rubber-Based Composites Reinforced with Nano Boron Nitride in Thermal Conductive and Electrical-Insulating Fields. Mechanics of Composite, Hybrid & Multi-functional Materials, Volume 5, Springer International Publishing, pp.7-15, 2022, Mechanics of Composite, Hybrid & Multi-functional Materials, Volume 5, ⟨10.1007/978-3-031-17445-2_2⟩. ⟨hal-03904618⟩
  • Vincent Guipont, Sylvain Dépinoy, Christophe Colin. Additive Manufacturing of Metal Alloys 1. Additive Manufacturing of Metal Alloys 1, 1, Wiley, 2022, ⟨10.1002/9781394163380.ch1⟩. ⟨hal-04237439⟩
  • Vincent Maurel, Marion Bartsch, Marie-Helene Vidal-Sétif, Robert Vassen, Vincent Guipont. Coated single crystal superalloys: processing, characterization, and modeling of protective coatings. Nickel Base Single Crystals Across Length Scales, Elsevier, pp.283-338, 2022, ⟨10.1016/B978-0-12-819357-0.00018-4⟩. ⟨hal-03599696⟩
  • Dominique Jeulin, Samuel Forest. Statistical approach to the Representative Volume Element Size of Random Composites. Digital materials, Continuum numerical methods at the mesoscale, In press. ⟨hal-03701237v2⟩
  • Jean-Briac Le Graverend, Damien Texier, Vincent Maurel. Aging. Nickel Base Single Crystals Across Length Scales, Elsevier, p. 223 - 257 (chap.08), 2021, 978-0-12-819357-0. ⟨10.1016/B978-0-12-819357-0.00016-0⟩. ⟨hal-03358966⟩
  • François Willot. Caractérisation et modélisation probabiliste de milieux hétérogènes. Christian Gogu. Ingénierie mécanique en contexte incertain - Des approches classiques à quelques développements récents, ISTE Editions, pp.51-90, 2021, 9781789480108. ⟨hal-03088263⟩
  • François Willot. Characterization and probabilistic modeling of heterogeneous media. Mechanical Engineering under Uncertainties - From Classical Approaches to Some Recent Developments, ISTE Editions, pp.43-82, 2021, 978-1-78945-010-1. ⟨hal-03088274⟩
  • Vincent Maurel, Lara Mahfouz, Vincent Guipont, Basile Marchand, Fabrice Gaslain, et al.. Recent Progress in Local Characterization of Damage Evolution in Thermal Barrier Coating Under Thermal Cycling. Tin S. et al. Superalloys 2020, The Minerals, Metals & Materials Series. Springer, Cham., pp.813-823, 2020, ⟨10.1007/978-3-030-51834-9_80⟩. ⟨hal-03035344⟩
  • Michel Jeandin, Francesco Delloro, Margaux Bunel. Advanced Modeling and Simulation Tools to Address Build-Up Issues in Additive Manufacturing by Cold Spray. Cold Spray in the Realm of Additive Manufacturing, Springer International Publishing, pp.129-175, 2020, Materials Forming, Machining and Tribology, ⟨10.1007/978-3-030-42756-6_5⟩. ⟨hal-03522047⟩
  • Doan Pham Minh, Philippe Accart, Céline Boachon, Rachel Calvet, Anthony Chesnaud, et al.. Generic and Advanced Characterization Techniques. Ange Nzihou. Handbook on Characterization of Biomass, Biowaste and Related By-products, 1, Springer International Publishing, 31-497 (chap. 2), 2020, 978-3-030-35019-2. ⟨10.1007/978-3-030-35020-8_2⟩. ⟨hal-02494203⟩
  • Elsa Weiss-Hortala, Anthony Chesnaud, Laurène Haurie, Nathalie Lyczko, Rajesh Munirathinam, et al.. Solid Residues (Biochar, Bottom Ash, Fly Ash, …). Ange Nzihou. Handbook on Characterization of Biomass, Biowaste and Related By-products, 2, Springer International Publishing, 1307-1387 (Chap. 15), 2020, 978-3-030-35019-2. ⟨10.1007/978-3-030-35020-8_15⟩. ⟨hal-02494339⟩
  • Samuel Forest, Kais Ammar, Benoit Appolaire, Victor De Rancourt, Stephan Wulfinghoff. Generalized continua and phase-field models : application to crystal plasticity. ed. S. Mesarovic, S. Forest, H. Zbib. Mesoscale models : from micro-physics to macro-interpretation, CISM International centre for mechanical sciences, pp.299-344, 2019, ⟨10.1007/978-3-319-94186-8_6⟩. ⟨hal-01955835⟩
  • R. Bouaziz, C Ovalle, L. Laiarinandrasana. A constitutive model for rubber bearings subjected to combined compression and shear. Constitutive Models for Rubber XI, 1, CRC Press, pp.255-260, 2019, ⟨10.1201/9780429324710-45⟩. ⟨hal-02520247⟩
  • Justin Dirrenberger, Samuel Forest, Dominique Jeulin. Computational Homogenization of Architectured Materials. Architectured Materials in Nature and Engineering, Springer, pp.89-139, 2019, 9781493991587. ⟨10.1007/978-3-030-11942-3_4⟩. ⟨hal-02129186⟩
  • Isabelle Aubert, Jamaa Bouhattate, Yann Charles, Thierry Couvant, Matthieu Dhondt, et al.. Local-scale Modeling of Plasticity–Environment Interactions. Mechanics - Microstructure - Corrosion Coupling :Concepts, Experiments, Modeling and Cases, Elsevier, pp.413-438, 2019, 978-1-78548-309-7. ⟨10.1016/B978-1-78548-309-7.50018-1⟩. ⟨hal-02149396⟩
  • Vladislav Yastrebov. Méthodes numériques en contact micromécanique. Mécanique Numérique du Contact, A paraître. ⟨hal-02394181v2⟩
  • Aubert Isabelle, Bouhattate Jamaa, Y. Charles, Couvant Thierry, Matthieu Dhondt, et al.. Modélisation à l’échelle locale des interactions plasticité-environnement.  Christine BLANC;  Isabelle AUBERT. Couplage 'mécanique – microstructure – corrosion'Concepts, essais, modélisation et cas concrets, ISTE, 2018, 1784054887. ⟨hal-03915157⟩
  • Samuel Forest. Micromorphic Approach to Gradient Plasticity and Damage. Handbook of Nonlocal Continuum Mechanics for Materials and Structures, Springer International Publishing, pp.1-47, 2018. ⟨hal-02266713⟩
  • Samuel Forest. Micromorphic Approach to Materials with Internal Length. Encyclopedia of Continuum Mechanics, Springer Berlin Heidelberg, pp.1-11, 2018. ⟨hal-02266706⟩
  • S. Forest, J. Mayeur, D. Mcdowell. Micromorphic Crystal Plasticity. Handbook of Nonlocal Continuum Mechanics for Materials and Structures, Springer International Publishing, pp.1-44, 2018. ⟨hal-02266716⟩
  • Philippe Colomban, Vincent Jauzein. Silk: fibres, films and composites – Processing, Structure and Mechanics (ch. 5). Antony R. Bunsell. HANDBOOK OF TENSILE PROPERTIES OF TEXTILES AND TECHNICAL FIBRES, 2ND EDITION, Woodhead Publishing Ltd CRC Press, pp.137-183, 2018, 978-0-08-101272-7 (print) 978-0-08-101886-6 (online). ⟨10.1016/B978-0-08-101272-7.00005-5⟩. ⟨hal-03975462⟩
  • Samuel Forest. Use and abuse of the method of virtual power in generalized continuum mechanics and thermodynamics. ed. H. Altenbach, J. Pouget, M. Rousseau, B.Collet, T. Michelitsch. Generalized Models and Non-classical Approaches in Complex Materials 1 , Springer, pp.311-334, 2018, Advanced Structured Materials, 978-3-319-72439-3. ⟨10.1007/978-3-319-72440-9_16⟩. ⟨hal-01780618⟩
  • Anthony R. Bunsell. Introduction to the science of fibers. ed. A.R. Bunsell. Handbook of properties of textile and technical fibres, Elsevier-Woodhead Publ, pp.1-20, 2018, ⟨10.1016/B978-0-08-101272-7.00001-8⟩. ⟨hal-01701847⟩
  • Anthony R. Bunsell, José-Martin Herrera-Ramirez, Christophe Le Clerc. Tensile fatigue of thermoplastic fibers. ed. A.R. Bunsell. Handbook of properties of textile and technical fibres, Elsevier-Woodhead Publ, pp.595-618, 2018, ⟨10.1016/B978-0-08-101272-7.00016-X⟩. ⟨hal-01701904⟩
  • Ante F Buljac, Lukas Helfen, François Hild, Thilo F. Morgeneyer. Early strain localization in strong work hardening aluminum alloy (2198 T3): 3D laminography and DVC measurement. L. Lamberti, M.-T. Lin, C. Furlong, C. Sciammarella. Advancement of optical methods in experimental mechanics, volume 3, Springer, pp.15-17, 2018, Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics. ⟨hal-01634158⟩
  • Anthony R. Bunsell, Alain Thionnet. Health monitoring of high performance composite pressure vessels,. C.H. Zweben P.W.R. Beaumont. Reference Module in Materials Science and Materials Engineering , 7, Elsevier, pp.420-430, 2018, Comprehensive Composite Materials II. ⟨hal-01610885⟩
  • Ante Buljac, Modesar Shakoor, Jan Neggers, Marc Bernacki, Pierre-Olivier Bouchard, et al.. Experimental-Numerical Validation Framework for Micromechanical Simulations. Jurica Sorić, Peter Wriggers, Olivier Allix. Multiscale Modeling of Heterogeneous Structures, 86, Springer, pp.147-161, 2018, Lecture Notes in Applied and Computational Mechanics book series (LNACM), ⟨10.1007/978-3-319-65463-8_8⟩. ⟨hal-01656323⟩
  • Anthony R. Bunsell. Small-diameter silicon carbide fibers. ed. A.R. Bunsell. Handbook of properties of textile and technical fibres, Elsevier-Woodhead Publ, pp.873-902, 2018, ⟨10.1016/B978-0-08-101272-7.00022-5⟩. ⟨hal-01701882⟩
  • Anthony R. Bunsell, Sébastien Joannès, Alba Marcellan. Testing and characterization of fibers. ed. A.R. Bunsell. Handbook of properties of textile and technical fibres, Elsevier-Woodhead Publ, pp.21-55, 2018, ⟨10.1016/B978-0-08-101272-7.00002-X⟩. ⟨hal-01701860⟩
  • Henry Proudhon. Synchrotron imaging and diffraction for In Situ 3D characterization of polycrystalline materials. ed. D. Brancherie, P. Feissel, S. Bouvier, A. Ibrahimbegović. From microstructure investigations to multiscale modeling : bridging the gap, Wiley-ISTE, pp.1-39, 2017, 9781786302595. ⟨hal-01723238⟩
  • Jean-François Hochepied. Liquid-phase synthesis of nanocatalysts. ed. M. Van de Voorde and B. Sels. Nanotechnology in catalysis : Applications in the chemical industry, energy development, and environment protection, Wiley, pp.3-20, 2017, ⟨10.1002/9783527699827.ch1⟩. ⟨hal-01610899⟩
  • Georges Cailletaud, Florent Coudon. Scale transition rules applied to crystal plasticity. P. Trovalusci. Materials with internal structure : multiscale and multifield modeling and simulation, Springer, pp.1-15, 2016, 978-3-319-21493-1. ⟨10.1007/978-3-319-21494-8_1⟩. ⟨hal-01306797⟩
  • André Pineau, Antoine Andrieu. A model for predicting fracture toughness and scatter in thermally embrittled steels. ed. G. Hutter, L. Zybell. Recent trends in fracture and damage mechanics, Springer, pp.337-352, 2016, 978-3-319-21466-5. ⟨10.1007/978-3-319-21467-2_15⟩. ⟨hal-01289442⟩
  • Thibault Taillandier-Thomas, Thilo F. Morgeneyer, Stephane Roux, François Hild. On the use of regularized DVC to analyze strain localization. H. Jin, C. Sciammarella, S. Yoshida, L. Lamberti. Advancement of optical methods in experimental mechanics, volume 3, Society for experimental mechanics, pp.161-166, 2015, 978-3-319-06985-2. ⟨10.1007/978-3-319-06986-9_17⟩. ⟨hal-01112870⟩
  • Anthony R. Bunsell, Alain Thionnet. The control of the residual lifetimes of carbon fibre-reinforced composite pressure vessels. P. Beaumont, C. Soutis, A. Hodzic. Structural integrity and durability of advanced composites, Woodhead Publishing, pp.399-423, 2015, 978-0-08-100137-0. ⟨10.1016/B978-0-08-100137-0.00016-X⟩. ⟨hal-01236293⟩
  • Michel Jeandin, H. Koivuluoto, S. Vezzu. Coating properties. J. Villafuerte. Modern cold spray, Springer, pp.107-211, 2015, 978-3-319-16771-8. ⟨10.1007/978-3-319-16772-5_4⟩. ⟨hal-01199554⟩
  • Lakhdar Taleb, Kacem Sai, Georges Cailletaud. Capabilities of the multi-mechanism model in the prediction of the cyclic behavior of various classes of metals. H. Altenbach. From creep damage mechanics to homogenization methods, 64, Springer, pp.413-439, 2015, Advanced structured materials, 978-3-319-19439-4. ⟨10.1007/978-3-319-19440-0_19⟩. ⟨hal-01180110⟩
  • Fabrice Gaslain. Diffraction Kikuchi en transmission dans le MEB. ed. F. Brisset. EBSD : Analyse par diffraction des électrons rétrodiffusés ; applications et techniques couplées, EDP Sciences, pp.277-292, 2015, 9782759819126. ⟨hal-01289451⟩
  • Anne-Françoise Gourgues-Lorenzon. Introduction à la diffraction des électrons rétrodiffusés. ed. F. Brisset. EBSD : Analyse par diffraction des électrons rétrodiffusés ; applications et techniques couplées, EDP Sciences, pp.1-28, 2015, 9782759819126. ⟨hal-01289458⟩
  • Samuel Forest. Gradient thermoplasticity. ed. R.B. Hetnarski. Encyclopedia of thermal stresses, Springer, pp.2012-2025, 2014, 978-94-007-2738-0. ⟨10.1007/978-94-007-2739-7_984⟩. ⟨hal-01064308⟩
  • Samuel Forest, Kais Ammar, Benoit Appolaire, Nicolas Cordero, Anais Gaubert. Micromorphic approach to crystal plasticity and phase transformation. ed. J. Schroder, K. Hackl. Plasticity and beyond : microstructures, crystal-plasticity and phase transitions, Springer, pp.131-198, 2014, CISM International Centre for Mechanical Sciences, 978-3-7091-1624-1. ⟨10.1007/978-3-7091-1625-8_3⟩. ⟨hal-00931380⟩
  • Samuel Forest. Asymptotic analysis of heterogeneous micromorphic elastic solids. ed. R.B. Hetnarski. Encyclopedia of thermal stresses, Springer, pp.239-251, 2014, 978-94-007-2738-0. ⟨10.1007/978-94-007-2739-7_785⟩. ⟨hal-01064299⟩
  • Eric Maire, Samuel Forest. Calcul de microstructures. dir. J.Y. Buffière, E. Maire. Imagerie 3D en mécanique des matériaux, Lavoisier-Hermès, pp.267-282, 2014, 978-2-7462-4556-3. ⟨hal-01053961⟩
  • Thilo F. Morgeneyer, L. Helfen, François Hild. Feasibility study of 3D Digital Volume Correlation of synchrotron radiation laminography data for displacement field measurement during ductile crack initiation. H. Jin, C.Sciammarella, C. Furlong, S. Yoshida. Imaging methods for novel materials and challenging applications, volume 3, Society for experimental mechanics, pp.211-215, 2013, 978-1-4614-4234-9. ⟨10.1007/978-1-4614-4235-6_29⟩. ⟨hal-01112842⟩
  • Samuel Forest. Micromorphic media. ed. H. Altenbach, V.A. Eremeyev. Generalized continua from the theory to engineering applications, Springer, pp.249-300, 2013, CISM International centre for mechanical sciences, 541, 978-3-7091-1370-7. ⟨10.1007/978-3-7091-1371-4_5⟩. ⟨hal-00785946⟩
  • Jérôme Crépin, Stéphane Roux. From microstructure to consitutive laws. ed. M. Grédiac, F. Hild. Full-field measurements and identification in solid mechanics, ISTE/Wiley, pp.411-437, 2013, 978-1-84821-294-7. ⟨hal-00765523⟩
  • Jean-Marc. Bassat, Alain Thorel, Marie-Laure Fontaine, Christian Guizard, Mathieu Marrony, et al.. Les céramiques électrochimiques. Gilbert Fantozzi; Jean-Claude Nièpce; Guillaume Bonnefont. Les céramiques industrielles : propriétés, mise en forme et applications, Dunod, pp.323-366, 2013, 978-2-10-057739-2. ⟨hal-04163844⟩
  • André Pineau, Jacques Besson. Fragilisation thermique des aciers inoxydables duplex moulés : observations et modélisation. dir. I. Alvarez-Armas, S. Degallaix-Moreuil. Les aciers inoxydables duplex, Hermes science - Lavoisier, pp.191-237, 2012. ⟨hal-00714258⟩
  • M. Arrigoni, Michel Boustié, Cyril Bolis, Sophie Barradas, Laurent Berthe, et al.. Shock mechanics and interfaces. ed. M. Braccini, M. Dupeux. Mechanics of solid interfaces, ISTE/Wiley, pp.211-248, 2012, 978-1-84821-373-9. ⟨10.1002/9781118561669.ch7⟩. ⟨hal-00743342⟩
  • Samuel Forest. Generalized continuum modelling of crystal plasticity. ed. C. Sansour, S.Skatulla. Generalized continua and dislocation theory, Springer, pp.181-287, 2012, CISM Courses and lectures, 978-3-7091-1221-2. ⟨10.1007/978-3-7091-1222-9_3⟩. ⟨hal-00874792⟩
  • Dimitris K. Christoulis, Michel Jeandin, Eric Irissou, Jean-Gabriel Legoux, Wolfgang Knapp. Laser-assisted cold spray (LACS). D.C. Dumitras. NdYAG laser, InTech, pp.59-96, 2012, ⟨10.5772/2000⟩. ⟨hal-00685037⟩
  • Samuel Forest, A. Bertram. Formulations of strain gradient plasticity. H. Altenbach, G.A. Maugin, V. Erofeev. Mechanics of generalized continua, Springer, pp.137-149, 2011, Advanced structured materials, 978-3-642-19218-0. ⟨10.1007/978-3-642-19219-7_6⟩. ⟨hal-00683094⟩
  • François Grillon. L'art du polissage. ed. .P. Jonnard. Préparation des échantillons pour MEB et microanalyses, EDP Sciences, p. 69-86, 2011, 978-2-7598-0676-8. ⟨hal-00684684⟩
  • Vladislav Yastrebov, Georges Cailletaud, Frédéric Feyel. A local contact detection technique for very large contact and self contact problems : sequential and parallel implementations. G. Zavarise, P. Wriggers. Trends in computational contact mechanics, Springer, pp.227-251, 2011, Lecture Notes in Applied and Computational Mechanics, ⟨10.1007/978-3-642-22167-5_13⟩. ⟨hal-00636600⟩
  • André Pineau, Stephen Antolovich. Fatigue intergranulaire. dir. L. Priester. Joints de grains et plasticité cristalline, Hermes science - Lavoisier, pp.225-288, 2011. ⟨hal-00662252⟩
  • Nicolas Cordero, Samuel Forest, Esteban P. Busso, Stéphane Berbenni, M. Cherkaoui. Grain size effects in generalized continuum crystal plasticity. I.R. Ionescu, S. Bouvier, O. Cazanu, P. Franciosi. Plasticity of crystalline materials : from dislocations to continuum, ISTE/Wiley, pp.101-121, 2011. ⟨hal-00624119⟩
  • Anthony R. Bunsell. Fibres for composite reinforcement : properties and microstructures. P. Boisse. Composite reinforcement for optimum performance, Woodhead publishing, pp.3-31, 2011. ⟨hal-00662332⟩
  • Samuel Forest, Kais Ammar, Benoit Appolaire. Micromorphic vs. phase field approaches for gradient viscoplasticity and phase transformations. B. Markert. Advances in extended and multifield theories for continua, Springer, pp.69-88, 2011, Lecture Notes in Applied and Computational Mechanics, 978-3-642-22737-0. ⟨10.1007/978-3-642-22738-7_4⟩. ⟨hal-00683083⟩
  • Alain Thionnet. Modelling of microcracked bodies using the concept of Crack Opening Mode. Theoritical physics research developments, Novapublishers, 2011. ⟨hal-03998708⟩
  • Alain Thorel. Tape casting ceramics for high temperature fuel cell applications. ed. W. Wunderlich. Ceramic materials, Sciyo, pp.49-67, 2010, 978-953-307-145-9. ⟨hal-00794966⟩
  • Yves Bienvenu. Assemblage par diffusion (soudage ou brasage). Techniques de l'ingénieur, TI, BM 7747, 11 p., 2010. ⟨hal-00542503⟩
  • Alain Thionnet, Christiane Martin, D. Micollet. A new constructive method of anisotropic continuous materials behavioral laws based on the theory of invariants. B.E. Puckermann. Quasicrystals : types, systems and techniques, Nova publishers, 100 p., 2010. ⟨hal-00592006⟩
  • Alain Thionnet. Modelling of microcracked bodies using the concept of crack opening mode. M.C. Wythers. Advances in materials science research ; vol 1, Nova publishers, 40 p., 2010. ⟨hal-00592010⟩
  • Jacques Renard. Fatigue des matériaux composites renforcés de fibres continues. Techniques de l'ingénieur, TI, AM 5410, 16 p., 2010. ⟨hal-00523415⟩
  • J.S. Palmer, C.E. Castro, Melis Arslan, M.C. Boyce. Constitutive models for the force-extension behavior of biological filaments. K. Garikipati, E.M. Arruda. IUTAM symposium on cellular, molecular and tissue mechanics, Springer, pp.141-159, 2010, 978-90-481-3347-5. ⟨10.1007/978-90-481-3348-2_12⟩. ⟨hal-01112865⟩
  • Georges Cailletaud. Basic ingredients, development of phenomenological models and practical use of crystal plasticity. ed. R. Pippan, P. Gumbsch. Multiscale modelling of plasticity and fracture by means of dislocation mechanics, Springer, pp.271-326, 2010, CISM International Centre for Mechanical Sciences, 978-3-7091-0282-4. ⟨10.1007/978-3-7091-0283-1_6⟩. ⟨hal-00579426⟩
  • André Pineau, Stephen Antolovich. Fatigue à haute température. direction : C. Bathias, A. Pineau. Fatigue des matériaux et des structures 3, Hermes science - Lavoisier, pp.19-155, 2009. ⟨hal-00379088⟩
  • Anthony R. Bunsell. The mechanical behaviour of small diameter silicon carbide fibres. ed. A.R. Bunsell. Handbook of tensile properties of textile and technical fibres, Woodhead pub. limited, pp.603-625, 2009. ⟨hal-00456138⟩
  • Michel Boussuge. Verres et céramiques. direction : M. Clavel, P. Bompard. Endommagement et rupture des matériaux 2, Hermes science - Lavoisier, pp.15-40, 2009. ⟨hal-00462319⟩
  • Marc Bletry, Georges Cailletaud. Fatigue multiaxiale. direction : C. Bathias, A. Pineau. Fatigue des matériaux et des structures.4, Hermès-Lavoisier, pp.19-64, 2009, Mécanique et ingénierie des matériaux. ⟨hal-00454524⟩
  • Esteban P. Busso. Multiscale approaches : from the nanomechanics to the micromechanics. ed .V.V. Silberschmidt. Computational and experimental mechanics of advanced materials, Springer, pp.141-165, 2009, CISM International Centre for Mechanical Sciences, ⟨10.1007/978-3-211-99685-0_4⟩. ⟨hal-00522590⟩
  • Jacques Besson, Rodrigue Desmorat. Lois de comportement pour les matériaux endommageables. direction : M. Clavel, P. Bompard. Endommagement et rupture des matériaux 1, Hermes science - Lavoisier, pp.295-338, 2009. ⟨hal-00462321⟩
  • André Pineau, Jacques Besson. Thermal embrittlement of cast duplex stainless steels : observations and modeling. ed. I. Alvarez-Armas, S. Degallaix-Moreuil. Duplex stainless steels, Wiley, pp.161-208, 2009. ⟨hal-00456137⟩
  • Anthony R. Bunsell. Introduction to fibre tensile properties and failure. ed. A.R. Bunsell. Handbook of tensile properties of textile and technical fibres, Woodhead pub. limited, pp.1-17, 2009. ⟨hal-00456139⟩
  • Anthony R. Bunsell. Tensile testing of textile fibres. ed. A.R. Bunsell. Handbook of tensile properties of textile and technical fibres, Woodhead pub. limited, pp.18-48, 2009. ⟨hal-00456140⟩
  • Anthony R. Bunsell. Tensile fatigue of textile fibres. M. Miraftab. Fatigue failure of textile fibres, Woodhead publishing limited, pp.10-33, 2009. ⟨hal-00436452⟩
  • Anthony R. Bunsell. Tensile fatigue of thermoplastic fibres. ed. A.R. Bunsell. Handbook of tensile properties of textile and technical fibres, Woodhead pub. limited, pp.332-353, 2009. ⟨hal-00456170⟩
  • Henry Proudhon. Contact et surfaces. direction : M. Clavel, P. Bompard. Endommagement et rupture des matériaux 1, Hermes science - Lavoisier, pp.267-293, 2009. ⟨hal-00462323⟩
  • André Pineau. Mécanismes physiques d'endommagement et de rupture des matériaux. direction : M. Clavel, P. Bompard. Endommagement et rupture des matériaux 1, Hermes science - Lavoisier, pp.17-72, 2009. ⟨hal-00462324⟩
  • Vincent Jauzein, Philippe Colomban. Types, structure and mechanical properties of silk. ed. A.R. Bunsell. Handbook of tensile properties of textile and technical fibres, Woodhead pub. limited, pp.144-178, 2009. ⟨hal-00456142⟩
  • Eric Charkaluk, Luc Rémy. La fatigue thermique. direction : C. Bathias, A. Pineau. Fatigue des matériaux et des structures.4, Hermès-Lavoisier, pp.301-370, 2009, Mécanique et ingénierie des matériaux. ⟨hal-00454528⟩
  • André Pineau. La fatigue plastique oligocyclique. sous la direction de Claude Bathias, André Pineau. Fatigue des matériaux et des structures 1. Introduction, endurance, amorçage et propagation des fissures, fatigue oligocyclique et gigacyclique, Hermès-Lavoisier, pp.129-195, 2008, Mécanique et ingénierie des matériaux. ⟨hal-00336594⟩
  • André Pineau, Claude Bathias. Introduction à la fatigue : motivation et méthodologie. sous la direction de Claude Bathias, André Pineau. Fatigue des matériaux et des structures 1. Introduction, endurance, amorçage et propagation des fissures, fatigue oligocyclique et gigacyclique, Hermès-Lavoisier, pp.17-38, 2008, Mécanique et ingénierie des matériaux. ⟨hal-00336595⟩
  • Agnès Levret, Philippe Volant, David Carbon, Didier Combescure, Thierry Verdel, et al.. L'aqueduc romain de Nîmes (France) : nouveaux résultats en archéosismicité. dir. d'A. Levret. Archéosismicité & vulnérabilité : patrimoine bâti et société, Groupe APS, pp.165-188, 2008. ⟨hal-00312060⟩
  • Michel Boussuge. Caractérisation mécanique des céramiques. dir. S. Degallaix, B. Ilschner. Caractérisation expérimentale des matériaux I. Propriétés physiques, thermiques et mécaniques, Presses polytechniques et universitaires romandes, pp.335-351, 2007, Traité des matériaux, vol 2. ⟨hal-00149351⟩
  • Jacques Renard, Alain Thionnet. Généralités sur les lois de comportement. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.83-104, 2005. ⟨hal-00157329⟩
  • Jacques Renard. Comportement des structures stratifiées planes. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.267-298, 2005. ⟨hal-00157318⟩
  • Anthony R. Bunsell. Fibres de renforcement. C. Bathias. Matériaux composites, Dunod-Usine nouvelle, pp.9-30, 2005. ⟨hal-00160386⟩
  • Sébastien Blassiau, Bénédicte Bonnet. Calculs multiéchelles des composites stratifiés. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.345-373, 2005. ⟨hal-00157315⟩
  • Jacques Renard. Modèles micromécaniques. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.219-266, 2005. ⟨hal-00157321⟩
  • Anthony R. Bunsell. Oxide fibers. N.P. Bansal. Handbook of ceramic composites, Kluwer, pp.3-31, 2005. ⟨hal-00160378⟩
  • Anthony R. Bunsell. Constituants des composites. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.27-57, 2005. ⟨hal-00157332⟩
  • Christophe Colin. Caractérisation mécanique des matériaux composites. Dir. J. Renard. Elaboration, microstructure et comportement des matériaux composites à matrice polymère, Hermès-Lavoisier, pp.105-218, 2005. ⟨hal-00157334⟩
  • André Pineau. Physical mechanisms of damage. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.33-78, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164492⟩
  • Anthony R. Bunsell. Silicon carbide based and oxide fibre reinforcements. B. Cantor, F. Dunne, I. Stone. Metal and ceramic matrix composites, IOP, pp.325-336, 2004. ⟨hal-00160390⟩
  • Thomas Pardoen, Jacques Besson. Micromechanics-based constitutive models of ductile fracture. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.221-264, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164485⟩
  • Benoit Tanguy. Testing. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.109-145, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164502⟩
  • Marc Fivel, Samuel Forest. Plasticité cristalline et transition d'échelle : cas du polycristal. Techniques de l'ingénieur, TI, M4017, 11 p., 2004. ⟨hal-00165945⟩
  • Jacques Besson. Model identification. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.373-394, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164468⟩
  • Jacques Besson, Rodrigue Desmorat. Numerical implementation of constitutive models. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.279-310, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164466⟩
  • Samuel Forest. Generalized continuum modelling of single and polycrystal plasticity. ed. D. Raabe, F. Roters, F. Barlat, L.Q Chen. Continuum scale simulation of engineering materials : fundamentals, microstructures, process applications, VCH, pp.513-527, 2004. ⟨hal-00165958⟩
  • Marc Fivel, Samuel Forest. Plasticité cristalline et transition d'échelle : cas du monocristal. Techniques de l'ingénieur, TI, M4016, 20 p., 2004. ⟨hal-00165940⟩
  • Samuel Forest, Eric Lorentz. Localization phenomena and regularization methods. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.311-371, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164479⟩
  • André Pineau, Jacques Besson. Introduction. J. Besson. Local approach to fracture, Les presses de l'ecole des mines de paris, pp.15-31, 2004, Ecole d'été “Mécanique de l'endommagement et approche locale de la rupture” (MEALOR), juillet 2004. ⟨hal-00164498⟩
  • André Pineau. Practical application of local approach methods. Comprehensive structural integrity ; vol 7, Elsevier, pp.177-225, 2003, chapitre 7.05. ⟨hal-00172937⟩
  • Luc Rémy. Thermal-mechanical fatigue (including thermal shock). Comprehensive structural integrity ; vol 5, Elsevier, pp.113-199, 2003, chapitre 5.03. ⟨hal-00172942⟩
  • Thomas Antretter, F.D. Fischer, U. Cihak, K. Tanaka, Georges Cailletaud, et al.. Transformation Induced Plasticity (Trip) in a maraging steel. Q.P. Sun. IUTAM Symposium on mechanics of martensitic phase transformation in solids, Kluwer academic publishers, pp.87-94, 2002, 978-90-481-6071-6. ⟨10.1007/978-94-017-0069-6_11⟩. ⟨hal-01113497⟩
  • Fabrice Barbe, Samuel Forest, Georges Cailletaud. Polycrystalline Plasticity Under Small Strains. Bouchaud E., Jeulin D., Prioul C., Roux S. (eds). Physical Aspects of Fracture. NATO Science Series (Series II: Mathematics, Physics and Chemistry), 32, Springer Netherlands, pp.191-206, 2001, 978-0-7923-7147-2. ⟨10.1007/978-94-010-0656-9_15⟩. ⟨hal-02327413⟩
  • Georges Cailletaud, C. Depoid, D. Massinon, Eric Nicouleau-Bourles. Elastoviscoplasticity with aging in aluminium alloys. G.A. Maugin. Continuum thermomechanics, Kluwer academic publishers, pp.75-86, 2000, 978-0-7923-6407-8. ⟨10.1007/0-306-46946-4_5⟩. ⟨hal-01113492⟩
  • Samuel Forest, Jean-Marc Cardona, Rainer Sievert. Thermoelasticity of second-grade media. G.A. Maugin. Continuum thermomechanics, Kluwer academic publishers, pp.163-176, 2000, 978-0-7923-6407-8. ⟨10.1007/0-306-46946-4_12⟩. ⟨hal-01113486⟩

Brevets

  • Pauline Girardon, Sébastien Tahon, Jean-Michel Damasse, Marie-Hélène Berger, Hughes Cornil, et al.. Metal strip, bipolar plate and associated manufacturing method . United States, Patent n° : US20180112304. 2018. ⟨hal-01827386⟩
  • Magali Reytier, Jacques Besson, Lionel Bruguiere, Jean François Juliaa. Seal between two elements having different coefficients of thermal expansion. France, Patent n° : US9890860B2. 2018. ⟨hal-01827374⟩
  • Bernard Cappa, Cédric Carlavan, Christophe Colin, Maryane Jacquier, Julien Sijobert, et al.. Procédé de chargement, pièce métallique chargée ou rechargée. France, N° de brevet: 3 042 139. 2017. ⟨hal-01518998⟩
  • Bernard Cappa, Cédric Carlavan, Christophe Colin, Maryane Jacquier, Julien Sijobert, et al.. Surfacing process, surfaced of resurfaced metal part. France, N° de brevet: WO 2017-060640. 2017. ⟨hal-01681416⟩
  • Pauline Girardon, Sébastien Tahon, Jean-Michel Damasse, Marie-Hélène Berger, Hughes Cornil, et al.. Bande ou feuille métallique présentant un revêtement à base de nitrure de chrome, plaque bipolaire et procédé de fabrication associé. Canada, N° de brevet: 2 979 099. 2016. ⟨hal-01681388⟩
  • Pauline Girardon, Sébastien Tahon, Jean-Michel Damasse, Marie-Hélène Berger, Hughes Cornil, et al.. Bande métallique, plaque bipolaire et procédé de fabrication associé. Canada, N° de brevet: 2 978 678. 2016. ⟨hal-01677763⟩
  • Christophe Colin, Laetitia Kirschner. Process for additive manufacturing of parts by melting or sintering particles of powder(s) using a high-energy beam with powders adapted to the targeted process/material pair. France, Patent n° : WO 2015/001241. 2015, 43 p. ⟨hal-01131878⟩
  • Christophe Colin, Jean-Dominique Bartout, Emmanuelle Shaker, David Marchat, Didier Nimal. Selective laser sintering/melting process. France, Patent n° : EP 2 784 045. 2014, 14 p. ⟨hal-01131880⟩
  • Christophe Colin, Julie Maisonneuve, Gérard Saussereau. Procédé de fabrication d'une pièce par fusion de poudre, les particules de poudre arrivant froides dans le bain. France, N° de brevet: 2 998 818. 2014, 21 p. ⟨hal-01070110⟩
  • Christophe Colin, Jean-François Fromentin, Gérard Saussereau. Procédé de fusion de poudre avec chauffage de la zone adjacente au bain. France, N° de brevet: 2 998 819. 2014, 21 p. ⟨hal-01070160⟩
  • Christophe Colin, Jean-Dominique Bartout. Procédé de fusion sélective de lits de poudre par faisceau de haute énergie sous une dépression de gaz. France, N° de brevet: 2 998 497. 2014, 18 p. ⟨hal-01067658⟩
  • Christophe Colin, Jean Baptiste Mottin, Laetitia Kirschner, Gérard Saussereau. Procédé de fabrication additive d'une pièce par fusion sélective ou frittage sélectif de lits de poudre à compacité optimisée par faisceau de haute énergie. France, N° de brevet: 2 998 496. 2014, 30 p. ⟨hal-01064351⟩
  • Pascal Bilhe, Geoffrey Bégué-Duthu, Vincent Guipont. Method for surface marking a mechanical part with a predefined graphic representation visible to the naked eye. N° de brevet: WO2014-057195. 2014, 16 p. ⟨hal-01018568⟩
  • Pascal Bilhe, Geoffrey Bégué-Duthu. Procédé de marquage en surface d'une pièce de moteur à turbine à gaz par une représentation graphique prédéfinie. France, N° de brevet: 2 996 487. 2014, 13 p. ⟨hal-01018451⟩
  • Sabine Cantournet, Laurent Corté, Fabrice Detrez, D.N. Ku, Mohammed Cherkaoui, et al.. Device for tissue repair. United States, Patent n° : US 2014/0039620. 2014, 12 p. ⟨hal-00974514⟩
  • Sabine Cantournet, Laurent Corté, D.N. Ku, Mohammed Cherkaoui, Jason S. Bach. Artificial tendon or ligament with varying stiffness along its length. France, Patent n° : EP 2 687 188. 2014, 20 p. ⟨hal-00973901⟩
  • Christophe Colin, Laetitia Kirschner. Procédé de fabrication additive de pièces par fusion ou frittage de particules de poudre(s) au moyen d'un faisceau de haute énergie avec des poudres adaptées au couple procédé/matériau visé. France, N° de brevet: F 3 008 014. 2013, 52 p. ⟨hal-01360896⟩
  • Mourad Chohra, Kevin Roche, Gilles Surdon, Michel Jeandin, Vincent Guipont, et al.. Pièce composite présentant une couche comportant une poudre fonctionnelle et un liant polymère, et procédé de fabrication associé. France, N° de brevet: 3 006 914. 2013, 23 p. ⟨hal-01131842⟩
  • Alain Thorel, Patrick A. Curmi, Jean-Paul Boudou, Fedor Jelezko. Cellule photovoltaique avec diamants fluorescents. France, N° de brevet: 2 982 423. 2013, 11 p. ⟨hal-00830857⟩
  • Zdravko Stoynov, Daria Vladikova, Alain Thorel, Anthony Chesnaud, Massimo Viviani, et al.. Pile à combustible avec cathode avec canaux. France, N° de brevet: 2 982 426. 2013, 14 p. ⟨hal-00830854⟩
  • Grégory Fabre, Vincent Guipont, Michel Jeandin. Procédé de détermination de l'adhérence d'une couche de barrière thermique en céramique formée sur un substrat par application d'une impulsion laser coté barrière thermique. France, N° de brevet: 2 979 015. 2013, 15 p. ⟨hal-00816365⟩
  • Grégory Fabre, Jean Yves Guedou, Vincent Guipont, Michel Jeandin. Procédé de détermination de l'apparition de décohésions dans une couche de revêtement en céramique transparente formée sur un substrat. N° de brevet: WO2013/021134. 2013, 9 p. ⟨hal-00794652⟩
  • Alain Thorel, Patrick A. Curmi, Jean-Paul Boudou. Procédé de marquage d'un objet par microdiamants. France, N° de brevet: WO2012/175865. 2012, 17 p. ⟨hal-00816067⟩
  • Laurent Peigat, Jacques Besson, Magali Reytier. Procédé d'estimation de l'étanchéité d'un joint. France, N° de brevet: 2 972 531. 2012, 54 p. ⟨hal-00785282⟩
  • Jean-Marie Malhaire, Michel Jeandin, Damien Giraud. Procédé de formation d'un revêtement métallique sur une surface d'un substrat thermoplastique, et matériau composite correspondant. France, N° de brevet: 2 995 323. 2012, 14 p. ⟨hal-01055492⟩
  • Sabine Cantournet, Laurent Corté, Fabrice Detrez, D.N. Ku, Mohammed Cherkaoui, et al.. Device for tissue repair. France, Patent n° : WO2012/098251 A1. 2012, 40 p. ⟨hal-00732343⟩
  • Alain Thorel, Zdravko Stoynov, Daria Vladikova, Anthony Chesnaud, Massimo Viviani, et al.. Pile à combustible avec ensemble electrolytes-membrane monolithique. France, N° de brevet: 2 969 395. 2010, 13 p. ⟨hal-00732399⟩
  • Christophe Colin, Elodie Sorlier, Alfazazi Dourfaye. Procédé pour fabriquer une pièce comprenant un bloc en matériau dense du type carbure cémenté, présentant un grandient de propriétés et pièce obtenue. France, N° de brevet: 2 936 817. 2010, 20 p. ⟨hal-00481485⟩
  • Magali Reytier, Jacques Besson, Lionel Bruguiere, Juliaa Jean François. Joint d'étanchéité entre deux éléments à coefficients de dilatation thermique différents. France, N° de brevet: 2 951 517. 2009, 25 p. ⟨hal-00595989⟩
  • Yves Bienvenu, Abderrahmen Kaabi, David Ryckelynck, Pierre Bertrand, Christian-Eric Bruzek, et al.. Matériau composite multicouche utilisé pour la fabrication de substrats de modules électroniques et procédé de fabrication correspondant. France, N° de brevet: 2 951 020. 2009, 30 p. ⟨hal-00595898⟩
  • Alfazazi Dourfaye, Christophe Colin, Elodie Sorlier, Hedi Sellami. Process for the production of an element comprising at least one block of dense material constituted by hard particles dispersed in a binder phase : application to cutting or drilling tools. United States, Patent n° : US 2008/0240879 A1. 2008, pp.12. ⟨hal-00749128⟩
  • Julien Hafsaoui. Anode à reformage par craquage, de pile à combustible PCFC. France, N° de brevet: 2 934 717. 2008, 16 p. ⟨hal-00461282⟩
  • Sophie Barradas, Florent Bourlier, Vincent Guipont, Michel Jeandin. Procédé de détermination de l'adhérence d'une couche de barrière thermique en céramique formée sur un substrat,. France, N° de brevet: 2 926 137. 2008, 15 p. ⟨hal-00436448⟩
  • Christophe Colin. Procédé d'assemblage de deux blocs en matériau dense ou non dense constitué de particules dures dispersées dans une phase liante : application à des outils de coupe ou de forage. France, N° de brevet: 2 914 207. 2007, 28 p. ⟨hal-00343756⟩
  • Alfazazi Dourfaye, Christophe Colin, Elodie Sorlier, Hedi Sellami. Procédé pour fabriquer une pièce comprenant au moins un bloc en matériau dense constitué de particules dures dispersées dans une phase liante : application à des outils de coupe ou de forage. France, N° de brevet: 2 914 206. 2007, 24 p. ⟨hal-00343661⟩
  • Claude Turrini, Véronique Zerrouki, Christophe Colin, Géraldine Perrin. Procédé de détection et de quantification d'anomalies de perçage. France, N° de brevet: 2 904 446. 2006, 42 p. ⟨hal-00280959⟩
  • Isabelle Augustins-Lecallier, Pierre Caron, J.Y. Guedou, Didier Locq, Loic Nazé. Alliage à base de nickel. France, N° de brevet: 2 899 240. 2006, 18 p. ⟨hal-00193427⟩
  • Mélissa Delqué, Michel Jeandin, Florence Le Strat, Alain Pasgrimaud. Revêtement appliqué à un organe de glissement par projection thermique. France, N° de brevet: 2 890 425. 2005, 17 p. ⟨hal-00222026⟩
  • Alain Thorel. Cellule de pile à combustible haute température à conduction mixte anionique et protonique. France, N° de brevet: 2 883 420. 2005, 6 p. ⟨hal-00222783⟩
  • Benjamin Henry, Erik Welvaert, Julien da Costa Teixeira, François Borit, Vincent Guipont, et al.. Procédé et dispositif pour projeter un revêtement sur un substrat. France, N° de brevet: 2 840 924. 2002, 23 p. ⟨hal-00166042⟩
  • Thomas Muller, Laurence Valin, Anthony R. Bunsell. Procédé de contrôle et de qualification d'un réservoir en matériau composite. France, N° de brevet: 2 838 519. 2002, 17 p. ⟨hal-00222042⟩

Autres publications

  • Yvan Marthouret, Tony Zaouter, Florent Ledrappier, Guillaume Kermouche, Vladislav Yastrebov, et al.. Open Review of "Wedge indentation of elastoplastic solids—from single indentation to interaction between indenters". 2023. ⟨hal-04199877⟩
  • Vincent Maurel, Vincent Chiaruttini, Alain Köster, Djamel Missoum-Benziane, Roberto Brighenti, et al.. Review of "Fatigue crack growth under large scale yielding condition: a tool based on explicit crack growth". 2023. ⟨hal-03963541⟩
  • Xiang Kong, Jianqiang Chen, Yazid Madi, Djamel Missoum-Benziane, Jacques Besson, et al.. Review of “Plasticity and ductility of an anisotropic recrystallized AA2198 Al-Cu-Li alloy in T3 and T8 conditions during proportional and non-proportional loading paths: simulations and experiments”. 2022. ⟨hal-03889903⟩
  • David Ryckelynck, Laurent Lacourt. Réduction de modèle pour une mécanique partielle des champs lointains (Aussois 2018). 2018. ⟨hal-01706471⟩

Pré-publications, Documents de travail

  • Mehran Mohammadi, Santiago Velasco-Forero, François Willot, Mateus Sangalli, Thomas Walter, et al.. Choquet Capacity networks for random point process classification. 2024. ⟨hal-04250560v2⟩
  • Lucien Laiarinandrasana, Olga Klinkova, Cristian Ovalle, Peter Cloetens, Thilo F. Morgeneyer. Deformation and cavitation at the spherulite scale of semi-crystalline polymers. 2023. ⟨hal-04100630v2⟩
  • Lili Wan, Cristian Ovalle Rodas, Lucien Laiarinandrasana. The stress heterogeneity effects on the heat build-up of semi-crystalline polymers: Theories and experiments. 2022. ⟨hal-03646389⟩
  • Kais Ammar, Tatu Pinomaa, Matti Lindroos, Paul Jreidini, Matias Haapalehto, et al.. Multiscale analysis of crystal defect formation in rapid solidification of pure aluminium and aluminium-copper alloys. 2022. ⟨hal-03512023⟩
  • Mohamed Abatour, Kais Ammar, Samuel Forest, C. Ovalle Ovalle Rodas, Nikolay Osipov, et al.. A generic formulation of anisotropic thermo-elastoviscoplasticity at finite deformations for Finite Element codes. 2021. ⟨hal-03462216v2⟩
  • J P Rouse, Pierre Kerfriden, M Hamadi. A probabilistic hierarchical sub-modelling approach through a posteriori Bayesian state estimation of finite element error fields. 2021. ⟨hal-03462530⟩
  • Harris Farooq, David Ryckelynck, Samuel Forest, Georges Cailletaud, Aldo Marano. A pruning algorithm for polycrystalline data in high performance computing. 2021. ⟨hal-03135714⟩
  • Aldo Marano, Lionel Gélébart, Samuel Forest. FFT-based simulations of slip and kink bands formation in 3D polycrystals: influence of strain gradient crystal plasticity. 2021. ⟨hal-03104411⟩
  • Youssef Hammadi, David Ryckelynck, Amin El-Bakkali. Reduced Bond Graph via machine learning for nonlinear multiphysics dynamic systems. 2020. ⟨hal-02526440⟩
  • Basava R Akula, Julien Vignollet, Vladislav Yastrebov. MorteX method for contact along real and embedded surfaces: coupling X-FEM with the Mortar method. 2019. ⟨hal-02394153⟩
  • Raju Basava, Julien Vignollet, Vladislav Yastrebov. Stabilized MorteX method for mesh tying along embedded interfaces. 2019. ⟨hal-02394146⟩
  • Vladislav Yastrebov. Wave-filtering properties of elastically-asymmetric architected materials. 2019. ⟨hal-02394159⟩
  • Nissrine Akkari, Fabien Casenave, David Ryckelynck. A novel Gappy reduced order method to capture non-parameterized geometrical variation in fluid dynamics problems. 2019. ⟨hal-02344342v2⟩
  • Rocco Moretti, Marc Lazareff, Marc Errera, Frédéric Feyel, Tristan Soubrié, et al.. Accuracy of Heat Load Transfer in a Quasi-Dynamic Fluid-Structure Interaction. 2019. ⟨hal-02262368⟩
  • Harris Farooq, Georges Cailletaud, Samuel Forest, David Ryckelynck. Crystal plasticity modeling of the cyclic behavior of polycrystalline aggregates under non-symmetric uniaxial loading: Global and local analyses. 2019. ⟨hal-02192742⟩
  • Clément Olivier, David Ryckelynck, Julien Cortial. Tensor-train approximation of parametric constitutive equations in elasto-viscoplasticity. 2017. ⟨hal-01590194⟩

Rapports

  • H. Gassot, T. Junquera, A. Legoff, J.C. Lescornet, V. Ji, et al.. Caractérisations mécaniques des dépots de cuivre réalisés par projection thermique. 2001, pp.28. ⟨in2p3-00018961⟩
  • Rodolphe Le Riche, E Souza de Curci, G Cailletaud, S Canu. Modélisation de Lois de Comportement par Réseaux de Neurones : Bilan d'une année de pluriformation INSA de Rouen / ENSMP. [Rapport de recherche] INSA Rouen; Ecole Nationale Supérieure des Mines de Paris. 1998. ⟨hal-03650276⟩

Thèses

  • Clément Ribart. Essais 4D multimodaux et simulations numériques appliqués à l'étude de la plasticité cristalline. Matériaux. Université Paris sciences et lettres, 2024. Français. ⟨NNT : 2024UPSLM001⟩. ⟨tel-04452745⟩
  • Nesrine Klebi. Jumeau numérique multi-échelle et assimilation de donnéespour prévoir l'endommagement dans les réservoirs sous pression en composite. Matériaux. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM051⟩. ⟨tel-04504082⟩
  • Pierre Mestre-Rinn. Modèle local de corrosion sous contrainte intergranulaire des alliages de nickel exposés aux zones confinées du circuit secondaire des réacteurs à eau sous pression. Matériaux. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM044⟩. ⟨tel-04440460⟩
  • Simon Le Berre. Hyper-réduction d'ordre de modèle en mécanique du contact sous formulation mixte potentiellement non symétrique : analyse théorique et numérique. Mécanique [physics]. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM043⟩. ⟨tel-04438231⟩
  • Lili Wan. The effect of stress heterogeneity on the heat build-up of reinforced thermoplastics/rubbers. Material chemistry. Université Paris sciences et lettres, 2023. English. ⟨NNT : 2023UPSLM019⟩. ⟨tel-04249416⟩
  • Axel Aublet. Métrologie fonctionnelle par imagerie 3D et apprentissage de jumeaux numériques : application à la fatigue thermo-mécanique dans les superalliages monocristallins. Matériaux. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM028⟩. ⟨tel-04304032⟩
  • Geoffrey Céleste. Projection de céramiques par cold spray : influence de l’architecture de poudres agglomérées sur le comportement à l’impact et l’élaboration des dépôts. Matériaux et structures en mécanique [physics.class-ph]. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM042⟩. ⟨tel-04390890⟩
  • Thalita De Paula. Oxydation et corrosion sous contrainte d'un acier inoxydable écroui en milieu primaire des REP : effet des transitoires oxygénés. Matériaux. Université Paris sciences et lettres, 2023. Français. ⟨NNT : 2023UPSLM002⟩. ⟨tel-04081676⟩
  • Hamza Boukraichi. Mechanical submodels driven by machine learning : application to structural dynamics. Materials. Université Paris sciences et lettres, 2023. English. ⟨NNT : 2023UPSLM003⟩. ⟨tel-04083179⟩
  • Mouad Fergoug. Development of a model error estimation strategy and application to multi-scale model adaptation. Material chemistry. Université Paris sciences et lettres, 2023. English. ⟨NNT : 2023UPSLM026⟩. ⟨tel-04300792⟩
  • Baptiste Py-Renaudie. Effect of welding on stress relaxation cracking of the austenitic stainless steel AISI 316L(N). Material chemistry. Université Paris sciences et lettres, 2023. English. ⟨NNT : 2023UPSLM001⟩. ⟨tel-04058959⟩
  • Cléa Plouze. Etude de revêtements base nickel pour le chaînage des procédés Cold Spray et L-PBF (Laser-Powder Bed Fusion). Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM074⟩. ⟨tel-04058975⟩
  • Lara Mahfouz. Evolution du système barrière thermique AM1/(Ni,Pt)Al/YPSZ en conditions de fatigue thermo-mécanique. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM068⟩. ⟨tel-04050790⟩
  • Patrizio Lomonaco. Study of electrically conductive coatings produced by cold spray onto brittle and thermosensitive substrate. Material chemistry. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM065⟩. ⟨tel-04049986⟩
  • Mohamed Abatour. Automatic regularization of finite element simulations of plasticity at finite strains. Mechanics [physics]. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM085⟩. ⟨tel-04199280⟩
  • Laurent Aubanel. Étude du comportement tribologique en régime lubrifié de revêtements cold spray composites à base d’acier. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM030⟩. ⟨tel-03881837⟩
  • Zacharie Shokeir. Influence of radiation damage on fracture toughness of aluminum alloys in nuclear research reactors. Materials. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM051⟩. ⟨tel-04003017⟩
  • Clément Cadet. Ductile failure of random porous materials : Computational approach and application to weld defects. Materials Science [cond-mat.mtrl-sci]. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM028⟩. ⟨tel-03867113⟩
  • Pablo Pereira Alvarez. Real-time prediction of mechanical stresses in welding by a library of surrogate models. Materials. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM049⟩. ⟨tel-04003018⟩
  • Constance Chanh. Analyse du lien entre microstructure, chargement mécanique et fissuration lors de la traction en croix de soudures par point par résistance d'un acier inoxydable martensitique. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM022⟩. ⟨tel-03864957⟩
  • Xiang Kong. Ductile damage study for low stress triaxiality and during load path changes via 3D imaging and FE simulations. Material chemistry. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM054⟩. ⟨tel-04011202⟩
  • Raffaele Russo. Cosserat thermo-mechanics under finite deformations : theory and finite element implementation. Materials. Université Paris sciences et lettres; Universidad del País Vasco, 2022. English. ⟨NNT : 2022UPSLM017⟩. ⟨tel-03813507⟩
  • Amar El Ouazani Tuhami. Simulation of ductile failure over long distances with a non–local GTN model. Material chemistry. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM027⟩. ⟨tel-03869005⟩
  • Sami Hilal. Thermo-mechanical modelling of the Wire Arc Additive Manufacturing process (WAAM). Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM021⟩. ⟨tel-03868998⟩
  • Maïlie Roquart. Films et revêtements de particules adhésifs pour la chirurgie. Chimie organique. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM009⟩. ⟨tel-03740216⟩
  • Chiraz Belhadj. Ductilité et ténacité des aciers : utilisation de mini-éprouvettes pour caractériser les matériaux. Mécanique [physics.med-ph]. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM083⟩. ⟨tel-04122118⟩
  • Adrien Milani. Influence du micro-alliage sur la population inclusionnaire, le comportement élastoplastique et la résistance à la rupture ductile d'aciers martensitiques. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM013⟩. ⟨tel-03738399⟩
  • Laury-Hann Brassart. Évolutions microstructurales de dépôts épais d'acier inoxydable austénitique 316L obtenus par projection dynamique par gaz froid ("cold spray") sous l'effet d'un traitement thermique ; conséquences sur les propriétés d'usage. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM008⟩. ⟨tel-03739758⟩
  • Colette Perez. Effet de la présence d'inclusions d'oxyde sur la prévision de l'amorçage de la corrosion sous contrainte de l'alliage 600 en milieu REP. Matériaux. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM007⟩. ⟨tel-03699531⟩
  • Natan Guillermin. Détection et simulation d'instabilités viscoplastiques dans les disques de turbines. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2022. Français. ⟨NNT : 2022UPSLM005⟩. ⟨tel-03689634⟩
  • Phuong Anh Dang. Thermosensitive macroporous hydrogels for cells encapsulation and delivery. Mechanics [physics]. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM087⟩. ⟨tel-04226939⟩
  • Vikram Phalke. Prediction of size effects and regularization of adiabatic shear band formation in single and poly-crystals : Gradient crystal plasticity approach. Material chemistry. Université Paris sciences et lettres, 2022. English. ⟨NNT : 2022UPSLM001⟩. ⟨tel-03649416⟩
  • Clément Bertaux. Transition ductile-fragile du PVC plastifié à différentes vitesses d'impact : compréhension des mécanismes et modélisation. Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM058⟩. ⟨tel-03648526⟩
  • Antoine Débarre. Comportement mécanique à haute température d'un composite alumine/alumine. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM048⟩. ⟨tel-03608646⟩
  • Mélanie Prost. Anisotropie de propagation de fissure de fatigue dans le superalliage INCONEL 718 élaboré par fabrication additive. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM050⟩. ⟨tel-03621286⟩
  • Hugo Launay. Reduced models via machine learning to analyse the criticality of defects. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2021. English. ⟨NNT : 2021UPSLM065⟩. ⟨tel-03584373v2⟩
  • Romain Borrossi. Transformations de phases et comportement mécanique à haute température d’un alliage de zirconium (M5Framatome) : effets de l’historique de température. Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM051⟩. ⟨tel-03648609⟩
  • Jennifer Blondel. Estimation du comportement élastique transverse de composites unidirectionnels, application à l'étude du rôle des fluctuations morphologiques locales. Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM059⟩. ⟨tel-03690439⟩
  • Thomas Daniel. Machine learning for nonlinear model order reduction. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2021. English. ⟨NNT : 2021UPSLM039⟩. ⟨tel-03525700⟩
  • Julien Moryousef. Étude du ballonnement des gaines combustibles en Zircaloy-4 en situation d'Accident de Perte de Réfrigérant Primaire. Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM019⟩. ⟨tel-03538946⟩
  • Alexandre Cottin. Etude de l’essai d’adhérence par choc laser (LASAT) sur dépôts plasma d’hydroxyapatite : influence des effets de bord sur les contraintes et la fissuration à l'interface. Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM017⟩. ⟨tel-03297255⟩
  • Sébastien Weiller. Etude de la relation entre porosité et étanchéité à l'ultra-vide de dépôts à base d'aluminium obtenus par projection dynamique par gaz froid ("cold spray"). Matériaux. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM004⟩. ⟨tel-03222499⟩
  • Rossen Tchakalov. Engineering and optimization of electrode/electrolyte interfaces to increase solid oxide fuel cell (SOFC) performances. Materials. Université Paris sciences et lettres, 2021. English. ⟨NNT : 2021UPSLM001⟩. ⟨tel-03191339⟩
  • Aboubakr Amzil. Compréhension et modélisation des mécanismes et des effets de géométrie dans la partie basse de la transition ductile-fragile. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2021. Français. ⟨NNT : 2021UPSLM002⟩. ⟨tel-03201543⟩
  • Martinus Putra Widjaja. Towards a full-scale type IV pressure vessel burst simulation using a multiscale model and the ergodic functions theory. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM073⟩. ⟨tel-03374506⟩
  • Lenny Jacquinot. Dimensionnement mécanique d'un carter-cylindres par modélisation continue du comportement d’un alliage d’aluminium du procédé de fabrication à la tenue en service. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM048⟩. ⟨tel-03142420⟩
  • Liliana Moniz da Silva Sancho. Etude de l'interaction laser-matière pour la fabrication de pièces à haute valeur ajoutée en céramiques oxydes semi-transparentes par fusion laser sélective sur lit de poudre. Matériaux composites et construction. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM060⟩. ⟨tel-03170259⟩
  • Ahmed Zouari. Comportement des gaines en alliages de zirconium en conditions thermo-mécaniques représentatives d’un accident RIA. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM058⟩. ⟨tel-03201656⟩
  • Lucie Baudin. Laser treated surfaces in particle accelerators : relation between superficial topography, particle adhesion and compatibility for ultra-high vacuum applications. Materials. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM052⟩. ⟨tel-03146009⟩
  • Chloé Varenne. Etude d'un alliage de titane β "transformable par déformation" : lien entre propriétés mécaniques, microstructures de déformation et mécanismes de rupture. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM030⟩. ⟨tel-03427468⟩
  • Jean-Michel Scherer. Localisation de la déformation et rupture ductile dans les monocristaux : application aux aciers austénitiques inoxydables irradiés. Materials Science [cond-mat.mtrl-sci]. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM026⟩. ⟨tel-03016743⟩
  • A. Arnaud. Etude et développement d'un système de contrôle volumique de la qualité cristalline des aubes de turbines.. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM078⟩. ⟨tel-03579869⟩
  • Olivier Ponte Felgueiras. Nouvelle méthode d'évaluation de la santé d'un composite fondée sur l'interaction des modes de flexion et de torsion.. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM055⟩. ⟨tel-03166756⟩
  • Anass Assadiki. Modelling precipitation hardening in an A356+0.5Cu cast aluminum alloy. Materials. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM074⟩. ⟨tel-03374503⟩
  • Youssef Hammadi. Réduction d'un modèle 0D instationnaire et non-linéaire de thermique habitacle pour l'optimisation énergétique des véhicules automobiles. Thermique [physics.class-ph]. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM027⟩. ⟨tel-03012674⟩
  • Thai Le Hong. Effets de l’oxygène et de l’hydrogène sur la microstructure et le comportement mécanique d’alliages de zirconium après incursion à haute température. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM003⟩. ⟨tel-02887252⟩
  • Jan Rojek. Effet de la porosité dans les réservoirs composites à parois épaisses : Observations expérimentales et modélisation numérique. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM015⟩. ⟨tel-02986921⟩
  • Faisal Islam. Probabilistic single fibre characterisation to improve stochastic strength modelling of unidirectional composites. Mechanics [physics]. Université Paris sciences et lettres, 2020. English. ⟨NNT : 2020UPSLM066⟩. ⟨tel-03272250⟩
  • Margaux Bunel. Influence du traitement thermique des poudres sur le dépôt sur projection dynamique par gaz froid (« cold spray ») d’alliage d’aluminium 2024 pour la fabrication additive. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM051⟩. ⟨tel-03153254⟩
  • Adrien Emery. Corrosion intergranulaire des aciers inoxydables austénitiques en milieu acide nitrique oxydant. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM031⟩. ⟨tel-03097345⟩
  • Marc Maisonneuve. Effet de transitoires oxygénés sur l'oxydation et la corrosion sous contrainte d'un acier inoxydable 316L écroui en milieu primaire des réacteurs à eau sous pression. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM002⟩. ⟨tel-02612528⟩
  • Qi Huang. Analyse expérimentale et numérique de l'amorçage de fissures de corrosion sous contrainte dans les aciers inoxydables pré-écrouis. Matériaux. Université Paris sciences et lettres, 2020. Français. ⟨NNT : 2020UPSLM081⟩. ⟨tel-03813572⟩
  • Laurane Finet. Stabilité en composition et en température des phases η et δ dans les superalliages base nickel. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM062⟩. ⟨tel-02520895⟩
  • Valentin Davaze. Numerical modelling of crack initiation and propagation in ductile metallic sheets for crash simulations. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM060⟩. ⟨tel-02518318⟩
  • Rocco Moretti. Étude et amélioration des méthodologies de couplage aérothermique fluide-structure. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM076⟩. ⟨tel-02992558v2⟩
  • Harris Farooq. Crystal plasticity applied to aggregates under non-symmetric cyclic loadings : Mechanical analysis and model order reduction. Mechanics [physics.med-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM044⟩. ⟨tel-02520953⟩
  • Mariem Trabelsi. Propagation de fissures en fatigue oligocyclique multiaxiale à haute température pour le superalliage HAYNES® 188. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM952⟩. ⟨tel-02515963v2⟩
  • Juan-Manuel Garcia. Mechanical characterization of Linear Friction Welded Titanium alloys. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM045⟩. ⟨tel-02512860⟩
  • Youbin Chen. Modeling of ductile fracture using local approach : reliable simulation of crack extension. Mechanics [physics.med-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM038⟩. ⟨tel-02439257⟩
  • Aldo Marano. Numerical simulation of strain localization in irradiated polycristals. Material chemistry. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM041⟩. ⟨tel-02570704⟩
  • Frank Tioguem Teagho. Lien entre microstructure et transition ductile-fragile des aciers trempés-revenus à haute résistance. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM040⟩. ⟨tel-02513106⟩
  • Laurent Lacourt. Étude numérique de la nocivité des défauts dans les soudures. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM050⟩. ⟨tel-02512870⟩
  • Fabrizio Pagano. Mécanismes de fatigue dominés par les fibres dans les composites stratifiés d’unidirectionnels. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM039⟩. ⟨tel-02405402⟩
  • Raphael Cusset. Effet du formage à froid sur la tenue en fatigue à la propagation d'une structure d'alliage Al2024T351. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM036⟩. ⟨tel-02439234v2⟩
  • Vincent Huleux. Comparaison des caractéristiques microstructurales et des propriétés en fluage de superalliages monocristallins à base de nickel de différentes générations. Matériaux. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM027⟩. ⟨tel-02466605⟩
  • Ahmed Chaieb. Comportement anisotherme et rupture des gaines combustibles en alliages de zirconium : Application à la situation d'accident d'insertion de réactivité (RIA). Mécanique [physics.med-ph]. Université Paris sciences et lettres, 2019. Français. ⟨NNT : 2019PSLEM005⟩. ⟨tel-02497015⟩
  • Andrei Shvarts. Coupling mechanical frictional contact with interfacial fluid flow at small and large scales. Computational Physics [physics.comp-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM009⟩. ⟨tel-02396951⟩
  • Basava Raju Akula. Extended mortar method for contact and mesh-tying applications. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM003⟩. ⟨tel-02200516⟩
  • Hiba Bargaoui. Modeling of the deformation of resin bonded foundry sand core during casting. Mechanics [physics.med-ph]. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM004⟩. ⟨tel-02439083⟩
  • Moubine Al Kotob. Competition between global and local instabilities in the failure of aeronautical structures. Materials. Université Paris sciences et lettres, 2019. English. ⟨NNT : 2019PSLEM002⟩. ⟨tel-02386956⟩
  • Anne-Cécile Bach. Etude du piégeage de l’hydrogène dans un acier inoxydable austénitique dans le cadre de la corrosion sous contrainte assistée par l’irradiation. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM044⟩. ⟨tel-02142048⟩
  • Hélène Godin. Effet de la microstructure sur la transition ductile-fragile d'aciers inoxydables martensitiques emboutissables à chaud. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM036⟩. ⟨tel-04416373⟩
  • Hiba Fekiri. Matériau architecturé à base de cuivre pour l’électronique de puissance : Substrats pour modules de puissance. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM085⟩. ⟨tel-02439120v2⟩
  • Xavier Truant. Etude et modélisation du comportement mécanique de panneaux de structure soudés par friction-malaxage (FSW). Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM043⟩. ⟨tel-02115123⟩
  • Daniel Marcos. Développement de MOULes INNOVants à haute conductivité thermique pour l’injection de matières plastiques fabriquées par Selective Laser Melting (SLM/LBM). Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM080⟩. ⟨tel-04416382⟩
  • William Hilth. Modélisation et simulation de la fragmentation de sable à liant polyuréthane. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM088⟩. ⟨tel-04416386⟩
  • Louise Briez. Relations microstructure-propriétés à haute température dans les alliages d'aluminium pour application aéronautique. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM045⟩. ⟨tel-02142413⟩
  • Jules Fauque de Maistre. Modèle d’ordre réduit en mécanique du contact. Application à la simulation du comportement des combustibles nucléaires. Mécanique [physics.med-ph]. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM073⟩. ⟨tel-02386690⟩
  • Tom Petit. Compréhension et modélisation d’essais de ténacité avec pop-in : application à l’aluminium 6061-T6 et influence de l’irradiation neutronique. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM019⟩. ⟨tel-02051841⟩
  • Ronan Thieurmel. Identification des conditions de rupture fragile des gainages combustibles en alliage de zirconium oxydés sous vapeur d’eau à haute température et trempés sous charge axiale. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM022⟩. ⟨tel-02191672⟩
  • François Rasselet. Analyse et modélisation du comportement mécanique d'un composite renforcé de fibres de carbone, soumis à des chargements complexes. Science des matériaux [cond-mat.mtrl-sci]. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM078⟩. ⟨tel-04049889⟩
  • Tuan Dinh Trong. Modèles hyper-réduits pour la simulation simplifiée du soudage en substitut de calcul hors d’atteinte. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM023⟩. ⟨tel-02097067⟩
  • Takahiro Sakimoto. Étude de fracture inverse pendant les essais DWTT. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM081⟩. ⟨tel-03642322⟩
  • Clément Defaisse. Étude de la rupture ductile d'un acier à très haute résistance pour des applications aéronautiques. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM010⟩. ⟨tel-02103732⟩
  • Lucie Mateus Freire. Évolutions microstructurales et comportement en fluage à haute température d'un acier inoxydable austénitique. Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM016⟩. ⟨tel-01906250⟩
  • Sicong Ren. Field measurements and finite element simulations of the interaction between dynamic strain ageing and ductile damage in metallic alloys. Materials. Université Paris sciences et lettres, 2018. English. ⟨NNT : 2018PSLEM001⟩. ⟨tel-01843228⟩
  • Pierre-Emmanuel Leger. Rôle de la microstructure sur les mécanismes de corrosion marine d’un dépôt à base d’aluminium élaboré par projection dynamique par gaz froid (« cold spray »). Matériaux. Université Paris sciences et lettres, 2018. Français. ⟨NNT : 2018PSLEM005⟩. ⟨tel-03118364⟩
  • Nathan Selles. Cavitation et rupture du Polyamide 6 sous état de contrainte multiaxial en traction monotone, fluage et fatigue. Dialogue entre imagerie 3D et modélisation par éléments finis.. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM038⟩. ⟨tel-01778515⟩
  • Clément Olivier. Décompositions tensorielles et factorisations de calculs intensifs appliquées à l'identification de modèles de comportement non linéaire. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM040⟩. ⟨tel-01783950⟩
  • Manon Abecassis. Fissuration de matériaux soudés en condition de fatigue multiaxiale. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM021⟩. ⟨tel-01852109⟩
  • Quentin Tonizzo. Lien microstructure-comportement à rupture d'aciers de troisième génération à structure duplex pour application automobile. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM073⟩. ⟨tel-02011584⟩
  • Juline Caboche. Développement d’assemblages brasés céramique-métal à haute tenue en température dans un environnement agressif. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM076⟩. ⟨tel-03902633⟩
  • Pierre-Alexis Poulet. Effet de la variabilité microstructurale sur le comportement d’un composite UD verre/PA11 : de la caractérisation expérimentale à la modélisation multi-échelle. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM050⟩. ⟨tel-01906203v2⟩
  • Francesco Bettonte. Development of a parameter identification strategy using Finite Element Model Updating on Digital Image Correlation measurements : towards the application to a non-local model. Materials. Université Paris sciences et lettres, 2017. English. ⟨NNT : 2017PSLEM022⟩. ⟨tel-01814212⟩
  • Quentin Roirand. Modélisation multiéchelle du comportement et de l'endommagement de composites tissés 3D. Développement d'outils numériques d'aide à la conception des structures tissées.. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM036⟩. ⟨tel-01777979⟩
  • Clémentine Fellah. Influence de la nature des interfaces carbonées au sein des composites SiC/SiC à renfort Hi-Nicalon S et Tyranno SA3 sur leur comportement mécanique. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM078⟩. ⟨tel-02892039⟩
  • Fabien Coussa. Du comportement dynamique de matériaux composites tissés à matrice polyamide. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM063⟩. ⟨tel-01843118⟩
  • Arruck Tragangoon. Etude d'assemblages multi-matériaux par boulonnage, par fixation avec insert et par collage d'une structure composite. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM048⟩. ⟨tel-03709979⟩
  • Maya Geagea. Nouvelles architectures de surfaces d’échanges de piles à combustible de type SOFC pour l’amélioration de l’efficacité électrochimique. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM046⟩. ⟨tel-01901236⟩
  • Clément Soret. Strain-based design of pipelines in extreme environments. Materials. Université Paris sciences et lettres, 2017. English. ⟨NNT : 2017PSLEM044⟩. ⟨tel-01845069⟩
  • Tang Gu. Modélisation multi-échelles du comportement électrique et élasto-plastique de fils composites Cu-Nb nanostructurés et architecturés. Mécanique des matériaux [physics.class-ph]. Ecole nationale supérieure d'arts et métiers - ENSAM, 2017. Français. ⟨NNT : 2017ENAM0017⟩. ⟨tel-01682112⟩
  • Thomas Geoffroy. Assemblages électroniques par frittage d’argent pour équipements aéronautiques fonctionnant en environnements sévères. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM019⟩. ⟨tel-01736197⟩
  • Toinou Blanc. Fabrication additive par dépôt laser direct de TA6V : étude expérimentale dans des régimes de forte productivité, modèles de comportement et recyclage de la poudre. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM047⟩. ⟨tel-03709972⟩
  • Florent Coudon. Comportement mécanique du superalliage base nickel à solidification dirigée DS200+Hf. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM062⟩. ⟨tel-01845122⟩
  • Nicolas Guéninchault. Experimental and numerical investigation of incipient plasticity in FCC polycrystals by X-ray synchrotron topotomography and CPFEM. Mechanics of materials [physics.class-ph]. Université Paris sciences et lettres, 2017. English. ⟨NNT : 2017PSLEM026⟩. ⟨tel-01749752⟩
  • Yang Zhang. Etude des conséquences mécaniques de la transformation de phase dans les réfractaires électrofondus à très haute teneur en zircone. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM035⟩. ⟨tel-01778611⟩
  • Emmanuelle Shaker. Fabrication directe d’implants osseux biocéramiques sur mesure par le procédé de fusion laser sélective sur lit de poudre : élaboration de la poudre d’hydroxyapatite, fabrication de pièces architecturées et étude de l’interaction rayonnement/matière. Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM080⟩. ⟨tel-03510265⟩
  • Hubert Salmon Legagneur. Caractérisation de l’endommagement à haute température d’aciers ferritiques renforcés par dispersion de nano-oxydes (ODS). Matériaux. Université Paris sciences et lettres, 2017. Français. ⟨NNT : 2017PSLEM034⟩. ⟨tel-01774675v2⟩
  • Chao Ling. Modeling the intragranular ductile fracture of irradiated steels. Effects of crystal anisotropy and strain gradient. Materials. Université Paris sciences et lettres, 2017. English. ⟨NNT : 2017PSLEM018⟩. ⟨tel-01699226⟩
  • Caroline Guinard. Influence des propriétés morphologiques et mécaniques des barrières thermiques sur la fissuration interfaciale induite par perçage laser impulsionnel. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM068⟩. ⟨tel-01708237⟩
  • Eric Lefebvre. Stratégie de modélisation pour suivre des fissures existantes dans une structure en béton armé précontraint. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM069⟩. ⟨tel-01709740⟩
  • Hicham Zaid. Two-dimensional electron gas oxide heterostructures for microelectronic in extreme environments. Materials Science [cond-mat.mtrl-sci]. Université Paris sciences et lettres, 2016. English. ⟨NNT : 2016PSLEM050⟩. ⟨tel-01651077⟩
  • Josiane Nguejio Nguimatsia. Processus diffusionnels à l'origine de l'évolution de la composition d’un alliage au cours de l'oxydation sélective en pointe de fissures intergranulaires. Application à la CSC de l'Alliage 600 en milieu primaire des REP. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM054⟩. ⟨tel-01668572⟩
  • Vincent Bortolussi. Etude expérimentale et numérique de la conductivité de revêtements composites métal-polymère déposés par projection dynamique par gaz froid sur substrat composite à matrice organique. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM075⟩. ⟨tel-01712448⟩
  • Hélène Sapardanis. Fissuration à l’interface d’un revêtement plasma céramique et d’un substrat métallique sous sollicitations dynamique et quasi-statique multiaxiales. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM033⟩. ⟨tel-01631321⟩
  • Guillaume Marion. Modélisation de procédés de fabrication additive de pièces aéronautiques et spatiales en Ti-6AI-4V par dépôt et fusion sélective d'un lit de poudre par laser : Approche thermique, métallurgique et mécanique. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM055⟩. ⟨tel-03510208⟩
  • Isabelle Turque. Effet de fortes teneurs en hydrogène sur les propriétés métallurgiques et mécaniques des gaines en alliage de zirconium après incursion à haute température. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM066⟩. ⟨tel-01708252⟩
  • Vincent Macdonald. Détermination d’un critère de rupture des gaines de Zircaloy-4 détendu hydruré contenant un blister d’hydrures, en conditions d’accident d’injection de réactivité.. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM038⟩. ⟨tel-01635242⟩
  • Jacqueline Caballero Hinostroza. Modélisation de l'amorçage de la Corrosion sous Contrainte en milieu primaire de l'alliage 600. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM034⟩. ⟨tel-01635264⟩
  • Elizabeth Chaumun. Corrosion sous contrainte de l’Alliage 82 en vapeur d’eau hydrogénée à 400°C : influence de la microstructure et du comportement mécanique sur l’amorçage. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM005⟩. ⟨tel-01368281⟩
  • Raphaël Maestracci. Influence de la microstructure sur les mécanismes d'endommagement thermomécanique de revêtements à base d'acier inoxydable AISI 316L réalisés par projection dynamique par gaz froid "cold spray". Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM017⟩. ⟨tel-01561419⟩
  • Pierre-Louis Valdenaire. Crystal plasticity : Transport equation and dislocation density. Materials. Université Paris sciences et lettres, 2016. English. ⟨NNT : 2016PSLEM002⟩. ⟨tel-01417559⟩
  • François-Xavier Hoche. Vers une prise en compte du vieillissement thermique dans la filière de dimensionnement des structures pour la fatigue thermomécanique. Mécanique des matériaux [physics.class-ph]. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM051⟩. ⟨tel-03270760⟩
  • Yi Zhang. Modélisation et simulation numérique robuste de l’endommagement ductile. Matériaux. Université Paris sciences et lettres, 2016. Français. ⟨NNT : 2016PSLEM003⟩. ⟨tel-01354272⟩
  • David Moreau. Design and characterization of hydrogel films and hydrogel-ceramic composites for biomedical applications. Materials. Université Paris sciences et lettres, 2016. English. ⟨NNT : 2016PSLEM015⟩. ⟨tel-01450519⟩
  • Pierre Vinson. Fusion sélective par laser de lits de poudre : Étude sur le recyclage de la poudre et détection de défauts au cours de la fabrication par imagerie thermique. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0068⟩. ⟨tel-03117437⟩
  • Alexandre Pichavant. Coprécipitation d'oxydes mixtes de titane et d'étain en solution aqueuse. Génie chimique. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0075⟩. ⟨tel-01316621⟩
  • Jia Li. Numerical simulation of fatigue crack propagation in real polycrystals imaged by X ray tomography. Material chemistry. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0079⟩. ⟨tel-01321257⟩
  • Geoffrey Bégué. Etude de l'adhérence de barrière thermique EB-PVD par choc laser (LASAT) pour le développement d'un contrôle non-destructif sur aube de turbine aéronautique. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0093⟩. ⟨tel-03081137⟩
  • Harry Pommier. Stress relaxation cracking in AISI 316L-type austenitic stainless steels. Mechanics of materials [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0073⟩. ⟨tel-01314141⟩
  • Sylvain Dépinoy. Microstructural evolution of a 2.25Cr - 1 Mo steel during austenitization and temper : austenite grain growth, carbide precipitation sequence and effects on mechanical properties. Materials. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0049⟩. ⟨tel-01304150⟩
  • Mona Ben Achour. Synthèse et caractérisation multi-échelle de nanoparticules pour des revêtements du secteur automobile. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0078⟩. ⟨tel-01321208⟩
  • Mouhcine Kahziz. Experimental and numerical investigation of ductile damage mechanisms and edge fracture in advanced automotive steels. Materials. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0051⟩. ⟨tel-01305952⟩
  • Quentin Blochet. Influence de la rugosité de surface du substrat sur l'adhérence de revêtements à base d'aluminium élaborés par projection dynamique par gaz froid ("cold spray"). Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0025⟩. ⟨tel-01272160v2⟩
  • Arina Marchenko. Multiscale investigation of room-temperature viscoplasticity and sustained load cracking of Titanium. Influence of hydrogen and oxygen content.. Materials. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0030⟩. ⟨tel-01285515⟩
  • Qingdong Yin. Influence de la composition chimique sur la formation de la microstructure et les caractéristiques mécaniques de soudures en aciers emboutissables à chaud. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0088⟩. ⟨tel-03081220⟩
  • Rim Ben Toumi. Endommagement par fatigue et durée de vie de structures en matériaux composites à fibres continues pour application liaison au sol. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0064⟩. ⟨tel-03081259⟩
  • Georges Peyre. Méthode EF2 et hyperréduction de modèle : vers des calculs massifs à l'échelle micro. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0026⟩. ⟨tel-01272193⟩
  • Elodie Bosso. Comportement du Zircaloy-4 recristallisé : identification du comportement anisotrope pour application à la situation d’accident de réactivité. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0020⟩. ⟨tel-01251565⟩
  • Francesco Delloro. Méthodes morphologique et par éléments finis combinées pour une nouvelle approche de la modélisation 3D du dépôt par projection dynamique par gaz froid (« cold spray »). Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0017⟩. ⟨tel-01216759⟩
  • Franck Tankoua Yinga. Transition ductile-fragile des aciers pour gazoducs : Étude quantitative des ruptures fragiles hors plan et corrélation à l’anisotropie de microtexture. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0014⟩. ⟨tel-01212488⟩
  • Samuel Jules. Vieillissement de joints brasés pour l’électronique de puissance : caractérisation métallurgique et simulation numérique du comportement mécanique. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0018⟩. ⟨tel-01924513⟩
  • Agathe Forre. Étude du comportement et de la fatigue d'un acier inoxydable ferritique en environnement thermomécanique et vibratoire. Mécanique des structures [physics.class-ph]. ENSTA ParisTech, 2015. Français. ⟨NNT : ⟩. ⟨tel-01419635⟩
  • Victor de Rancourt. Modelling the oxidation of polycristalline austenitic stainless steels using a phase field approach coupled with mechanics. Mechanics of materials [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0021⟩. ⟨tel-01253941⟩
  • Victor Bordereau. Quantitative relationships between chemical composition, microstructure and mechanical properties for bainitic steels. Materials. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0063⟩. ⟨tel-02892101v2⟩
  • Victor Fabre. Étude de l'endommagement en fatigue d'un composite thermoplastique à fibres courtes : cas du polyamide 6,6 renforcé de fibres de verre courtes. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0012⟩. ⟨tel-02892100v2⟩
  • Aurélien Villani. A multi-physics modelling framework to describe the behaviour of nano-scale multilayer systems undergoing irradiation damage. Materials and structures in mechanics [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2015. English. ⟨NNT : 2015ENMP0002⟩. ⟨tel-01139357⟩
  • Nicolas Di Patrizio. Précipitation continue de produits minéraux : étude de l'influence des conditions de mélange à la précipitation sur les caractéristiques d'oxydes mixtes de cérium et de zirconium. Génie chimique. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0001⟩. ⟨tel-01139348⟩
  • Philippe Burlot. Effet du confinement plastique sur la stabilité mécanique des défauts dans les gazoducs : vers l'utilisation des éprouvettes SENT pour la caractérisation de la résistance à la fissuration des défauts dans les gazoducs. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0076⟩. ⟨tel-01320815⟩
  • Bogdan-Adrian Chetroiu. Corrosion sous contrainte de l'alliage 600 en millieu primaire des REP : étude de la diffusion du chrome. Science des matériaux [cond-mat.mtrl-sci]. Ecole Nationale Supérieure des Mines de Paris, 2015. Français. ⟨NNT : 2015ENMP0008⟩. ⟨tel-01157822⟩
  • Romain Soulignac. Prévision de la durée de vie à l’écaillage des barrières thermiques. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0087⟩. ⟨tel-01217919⟩
  • Christophe Le Guyader. Mécanique de la rupture et endommagement d’un alliage d’aluminium 2219 T87 pour application aérospatiale. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0046⟩. ⟨tel-01142080⟩
  • Ekkarin Phongphinittana. Assemblages composites-polymères après traitement par plasma atmosphérique du composite : caractérisation mécaniques et modélisation. Autre. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0070⟩. ⟨tel-02892069v2⟩
  • Olivier Ther. Élaboration de carbures cémentés à gradient de propriétés par procédé d’imbibition réactive : Application aux inserts WC-Co et aux taillants en diamant polycristallin pour le forage pétrolier en conditions sévères. Autre. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0067⟩. ⟨tel-02892096⟩
  • Alexandre Iltchev. Homogénéisation périodique d’un matériau cellulaire en élasto-plasticité et application au calcul de structures : des petites aux grandes déformations. Matériaux et structures en mécanique [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0044⟩. ⟨tel-01142233⟩
  • Emma Piozin. Effect of thermomechanical optimisation on the microstructure and the mechanical properties of 9%Cr steel (Grade 91). Materials and structures in mechanics [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. English. ⟨NNT : 2014ENMP0049⟩. ⟨tel-01141826⟩
  • Minghao Zhang. Comportement viscoplastique des alliages austénitiques pendant la recristallisation sous faibles contraintes. Science des matériaux [cond-mat.mtrl-sci]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0060⟩. ⟨tel-01144443⟩
  • Raphaël Chosson. Étude expérimentale et modélisation du comportement en fluage sous pression interne d’une gaine en alliage de zirconium oxydée en atmosphère vapeur. Science des matériaux [cond-mat.mtrl-sci]. Mines ParisTech, 2014. Français. ⟨NNT : ⟩. ⟨tel-01314559⟩
  • Judith Wollbrett-Blitz. Comportement mécanique longitudinal et transverse, micro-mécanismes de déformation et effet de la température sur la fibre Kevlar® 29. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0062⟩. ⟨tel-01142223⟩
  • Mickaël Wehbi. Modélisation de l'amorçage de la corrosion sous contrainte dans les alliages base nickel 182 et 82 en milieu primaire des réacteurs à eau sous pression. Science des matériaux [cond-mat.mtrl-sci]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0056⟩. ⟨tel-01142433⟩
  • Mériem Abikchi. Effets des microstructures induites par le procédé de forgeage sur la durée de vie de pièces en Inconel 718 DA. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0069⟩. ⟨tel-02892024v2⟩
  • Delphine Thielleux. Choix des Matériaux et des procédés de mise en forme pour l’allègement des boîtiers d’électronique de puissance des véhicules électriques. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0094⟩. ⟨tel-01685023⟩
  • Fabien Bernachy-Barbé. Caractérisation des mécanismes d'endommagement et modélisation du comportement mécanique sous chargements multi-axiaux de tubes composites SiC/SiC. Matériaux et structures en mécanique [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0031⟩. ⟨tel-01139361⟩
  • Frédéric Royer. Fonctionnement et singularités du procédé de fusion laser sélective : Illustration par application à deux superalliages à base nickel et considérations énergétiques. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0053⟩. ⟨tel-01142368⟩
  • Henri-Alexandre Cayzac. Analyses expérimentale et numérique de l'endommagement matriciel d'un matériau composite : Cas d'un pultrudé thermoplastique renforcé de fibres de verre. Matériaux et structures en mécanique [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0034⟩. ⟨tel-01139401⟩
  • Damien Giraud. Étude des composantes mécanique et métallurgique dans la liaison revêtement-substrat obtenue par projection dynamique par gaz froid pour les systèmes «Aluminium/Polyamide6,6» et «Titane/TA6V». Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0018⟩. ⟨pastel-01073679⟩
  • Anne-Laure Rouffié. Compréhension et modélisation de la rupture fragile des aciers renforcés par nano-précipitation : effets de texture, de vieillissement et de composition. Autre. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0014⟩. ⟨pastel-01069061⟩
  • Noémie Rakotomalala. Simulation numérique de l’écaillage des barrières thermiques avec couplage thermo-mécanique. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0020⟩. ⟨tel-01153585⟩
  • Yasuhiro Shinohara. Prestrain effect of anisotropic ductile damage in API grade X100 line pipe steel. Other. Ecole Nationale Supérieure des Mines de Paris, 2014. English. ⟨NNT : 2014ENMP0019⟩. ⟨pastel-01073824⟩
  • Baramee Patamaprohm. Conception et durabilité de réservoirs en composites destinés au stockage de l’hydrogène. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0021⟩. ⟨tel-02018105⟩
  • Morgane Le Millier. Fragilisation des aciers inoxydables austénitiques sous irradiation : évolution de la microstructure et amorçage de la corrosion sous contrainte assistée par l'irradiation en milieu REP. Science des matériaux [cond-mat.mtrl-sci]. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0047⟩. ⟨tel-01142188⟩
  • Emmanuel Dumoulin. Fabrication additive de pièces en polymères thermoplastiques hautes performances et en polyamide 12 par le procédé de frittage sélectif par laser. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2014. Français. ⟨NNT : 2014ENMP0091⟩. ⟨pastel-01021861⟩
  • Mamadou Abdoul Mbacke. Caractérisation et modélisation du comportement mécanique des composites tressés 3D : Application à la conception de réservoirs GNV. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0060⟩. ⟨pastel-00960667⟩
  • Wassim Trabelsi. Approches multiéchelles d'expérimentation et de modélisation pour prédire la rupture d'un composite textile : Critère de classement des architectures tissées. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0087⟩. ⟨tel-02003462⟩
  • Alice Dumont. Effet des paramètres de traitements thermiques sur la microstructure et les propriétés mécaniques d'un superalliage base nickel élaboré par métallurgie des poudres. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0064⟩. ⟨pastel-00963714⟩
  • Meriadeg Revaud. Optimisation métallurgique du superalliage à base de Nickel 718Plus. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0048⟩. ⟨pastel-00957905⟩
  • Flora Salgado Goncalves. Caractérisation expérimentale et modélisation des interactions entre fissures et perçages multiples à haute température en élastoplasticité généralisée ou confinée. Science des matériaux [cond-mat.mtrl-sci]. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0094⟩. ⟨tel-01144411⟩
  • Mélanie Leroy. Étude de la nocivité d'un défaut de fonderie sur la durée de vie en fatigue à haute température d'une aube monocristalline, cas du joint de grains. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0065⟩. ⟨pastel-00963732⟩
  • Grégory Fabre. Influence des propriétés optiques et de l'endommagement de barrières thermiques EB-PVD pour la mesure d'adhérence par choc laser LASAT-2D. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0066⟩. ⟨pastel-00963742⟩
  • Auréliane Heudt. Etude de la fissuration en plasticité généralisée. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0100⟩. ⟨tel-04058921⟩
  • Laure-Line Descurninges. Influence de l’oxydation des particules de poudres de tantale sur les propriétés des dépôts cold spray. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0073⟩. ⟨pastel-00976684⟩
  • Naruepon Eiamnipon. Etude de la dégradation de structures composites en caoutchouc soumises à des chocs. Matériaux. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0099⟩. ⟨tel-01449960⟩
  • Damien Colas. Approche multi-échelle du vieillissement et du comportement cyclique dans le tantale. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0047⟩. ⟨pastel-00957882⟩
  • Jonathan Ricard. Approche locale de la rupture dans un thermoplastique semi-cristallin : le PolyOxyMéthylène : Application : modélisation thermomécanique d'un procédé de vissage-taraudage. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0034⟩. ⟨pastel-00945520⟩
  • Melchior Simon-Perret. Tenue mécanique de liners en titane pour réservoirs haute pression. Mécanique des matériaux [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0096⟩. ⟨tel-01144414⟩
  • Georges Bertrand Kamgaing Somoh. Conception et caractérisation mécanique des pièces en matériaux composites moulées par compression. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0081⟩. ⟨tel-01823852⟩
  • Antoine Andrieu. Mécanismes et modélisation multi-échelle de la rupture fragile trans- et inter-granulaire des aciers pour réacteurs à eau sous pression, en lien avec le vieillissement thermique. Autre. Ecole Nationale Supérieure des Mines de Paris, 2013. Français. ⟨NNT : 2013ENMP0046⟩. ⟨pastel-00957868⟩
  • Vivien Courtier. Réduction de modèle et simplification de l'intégration de loi de comportement pour la prévision de la durée de vie. Matériaux et structures en mécanique [physics.class-ph]. Ecole Polytechnique X, 2013. Français. ⟨NNT : ⟩. ⟨pastel-00854149⟩
  • Pauline Huguenin. Amorçage des fissures de corrosion sous contrainte dans les aciers inoxydables austénitiques pré-déformés et exposés au milieu primaire des réacteurs à eau sous pression. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0069⟩. ⟨pastel-00818372⟩
  • Yang Shen. Comportement et endommagement des alliages d’aluminium 6061-T6 : approche micromécanique. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0089⟩. ⟨pastel-00820764⟩
  • Xu Han. Modélisation de la fragilisation due au gonflement dans les aciers inoxydables austénitiques irradiés. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0066⟩. ⟨pastel-00818326⟩
  • Julian Durand. Approche multi-échelles des problèmes de contact et d'étanchéité. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0080⟩. ⟨pastel-00820173⟩
  • Justin Dirrenberger. Propriétés effectives de matériaux architecturés. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0045⟩. ⟨pastel-00797363⟩
  • Guillaume Martin. Simulation numérique multi-échelles du comportement mécanique des alliages de titane bêta-métastable Ti5553 et Ti17. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0099⟩. ⟨pastel-00873129⟩
  • Charlotte Kalck. Caractérisation métallurgique et modélisation de la tenue en fluage à 550°C des liaisons soudées en acier Grade 92. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0091⟩. ⟨pastel-00821830⟩
  • Arthur Hellouin de Menibus. Formation de blisters d'hydrures et effet sur la rupture de gaines en Zircaloy-4 en conditions d'accident d'injection de réactivité. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0068⟩. ⟨pastel-00818358⟩
  • Pierre Sallot. Modélisation de la durée de vie d'un revêtement aluminoformeur en conditions de sollicitations thermo-mécaniques. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0085⟩. ⟨pastel-00820205⟩
  • Antonin Steckmeyer. Caractérisation et modélisation du comportement mécanique à haute température des aciers ferritiques renforcés par dispersion d'oxydes. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0071⟩. ⟨pastel-00819136⟩
  • Mathieu Touboul. Étude du comportement mécanique à chaud de l'acier P91 : vers la compréhension du rôle des mécanismes intra/intergranulaires sur la tenue en fluage. Application aux structures soudées. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0075⟩. ⟨pastel-00819229⟩
  • Anthony Marais. Influence du vieillissement statique sur la transition ductile-fragile des aciers au C-Mn. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0081⟩. ⟨pastel-00820563⟩
  • Mi He. Caractérisation du comportement à rupture des alliages de zirconium de la gaine du crayon combustible des centrales nucléaires dans la phase post-trempe d'un APRP (Accident de Perte de Réfrigérant Primaire). Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0078⟩. ⟨pastel-00819279⟩
  • Prajwal Sabnis. Modelling the propagation and bifurcation of plasticity induced cracks in Nickel base single crystal superalloys. Other. Ecole Nationale Supérieure des Mines de Paris, 2012. English. ⟨NNT : 2012ENMP0074⟩. ⟨pastel-00819218⟩
  • Mamane Oumarou Mairagouna. Approche probabiliste du comportement mécanique des composites thermoplastiques assemblés par soudage laser. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0072⟩. ⟨pastel-00819162⟩
  • Laurent Peigat. Modélisation d'un joint viscoplastique pour la filière hydrogène. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0035⟩. ⟨pastel-00756297⟩
  • Konstantin Kuzmenkov. Study of dwell-effect on behaviour and fracture of the alloy Ti-6242. Other. Ecole Nationale Supérieure des Mines de Paris, 2012. English. ⟨NNT : 2012ENMP0029⟩. ⟨pastel-00745834⟩
  • Lingtao Sun. Etude numérique de l'amorçage et de la propagation de fissures de fretting. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0033⟩. ⟨pastel-00755695⟩
  • Bénédicte Baqué. Couplage aéro-thermo-mécanique pour la prédiction de la déformation d'une plaque soumise à une flamme. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0013⟩. ⟨pastel-00718738⟩
  • Aurélie Benoit À La Guillaume. Prédiction de la durée de vie de structures mécanosoudées soumises à des chargements thermiques anisothermes : application aux collecteurs d'échappement en tôle. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0023⟩. ⟨tel-01418771⟩
  • Yang Ding. Analyse morphologique de la microstructure 3D de réfractaires électrofondus à très haute teneur en zircone : relations avec les propriétés mécaniques, chimiques et le comportement pendant la transformation quadratique-monoclinique. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0031⟩. ⟨pastel-00743511⟩
  • Andrea Cabrera Salcedo. Modélisation du comportement mécanique "post-trempe", après oxydation à haute température, des gaines de combustible des réacteurs à eau pressurisée. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0009⟩. ⟨pastel-00705085⟩
  • Sam Cuvilliez. Passage d’un modèle d’endommagement continu régularisé à un modèle de fissuration cohésive dans le cadre de la rupture quasi-fragile. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0064⟩. ⟨pastel-00817940⟩
  • Henri Tézenas Du Montcel. Ingénierie des joints de grains dans les superalliages à base de nickel. Autre. Ecole Nationale Supérieure des Mines de Paris, 2012. Français. ⟨NNT : 2012ENMP0006⟩. ⟨pastel-00688115⟩
  • Pierre-François Giroux. Experimental study and simulation of cyclic softening of tempered martensite ferritic steels. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0087⟩. ⟨pastel-00710628⟩
  • Rattanak Lim. Numerical and experimental study of creep of Grade 91 steel at high temperature. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0083⟩. ⟨pastel-00687235⟩
  • Gwenaël Trégo. Comportement en fluage à haute température dans le domaine biphasé (α + β) de l'alliage M5®. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0084⟩. ⟨pastel-00688207⟩
  • Isabelle Augustins-Lecallier. Conception de nouveaux superalliages MdP base nickel pour disques de turbines. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0086⟩. ⟨pastel-00710579⟩
  • Édouard Pouillier. Hydrogen-induced Intergranular Fracture of Aluminum-Magnesium Alloys. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0095⟩. ⟨pastel-00711202⟩
  • Clémence Devilliers. Dégradation chimique du PE et influence sur le comportement, l'endommagement et la rupture en fluage : application à la durabilité des canalisations sous pression. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0094⟩. ⟨pastel-00711486⟩
  • Arnaud Beurotte. Étude de l'endommagement de structures céramiques "nid d'abeilles" sous sollicitations thermomécaniques : application à la régénération des filtres à particules. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0063⟩. ⟨pastel-00677124⟩
  • Thomas Le Jolu. Étude de l'influence des défauts de soudage sur le comportement plastique et la durée de vie en fatigue de soudures par friction-malaxage d'un alliage Al-Cu-Li. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0102⟩. ⟨pastel-00719638⟩
  • Guylaine Boittin. Expérimentation numérique pour l'aide à la spécification de la microstructure et des propriétés mécaniques d'un superalliage base Ni pour des applications moteurs. Mécanique des matériaux [physics.class-ph]. École nationale supérieure des mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0113⟩. ⟨tel-01248295⟩
  • Bahram Sarbandi. Finite element simulation of ceramic deformation during sintering. Mechanics of materials [physics.class-ph]. Ecole Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0112⟩. ⟨tel-01085057⟩
  • Joao Abreu. Contribution to the development of IDEAL-Cell, a new concept of intermediate temperature fuel cell. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0093⟩. ⟨pastel-00711493⟩
  • Faten Bourbita. Comportement en fatigue anisotherme des composites unidirectionnels à matrice titane renforcée par des fibres de carbure de silicium. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0098⟩. ⟨pastel-00712981⟩
  • Sophie Cartel. Méthodes numériques de représentation à variables séparées pour la résolution des problèmes paramétriques en mécanique non-linéaire des structures. Mécanique des structures [physics.class-ph]. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0064⟩. ⟨pastel-00661905⟩
  • Duy-Khanh Trinh. Méthodes d'homogénéisation d'ordre supérieur pour les matériaux architecturés. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0068⟩. ⟨pastel-00677046⟩
  • Nicolas Revest. Comportement en fatigue de pièces épaisses en matériaux composites. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0066⟩. ⟨pastel-00677076⟩
  • Yoann Guilhem. Étude numérique des champs mécaniques locaux dans les agrégats polycristallins d'acier 316L sous chargement de fatigue. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0108⟩. ⟨pastel-00732147⟩
  • Florine Maes. Étude de l'auto-réparation d'élastomères supramoléculaires. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0049⟩. ⟨pastel-00660450⟩
  • Michel Leroy. Expérimentation et modélisation du comportement mécanique de structures marines collées et aéronautiques collées-boulonnées. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0107⟩. ⟨pastel-00732181⟩
  • Cédric Thomas. Étude des mécanismes d'endommagement des composites fibres de carbone / matrice polyamide : application à la réalisation de réservoirs de stockage de gaz sous haute pression de type IV. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0035⟩. ⟨pastel-00656807⟩
  • Nicolas Cordero. A strain gradient approach to the mechanics of micro and nanocrystals. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0065⟩. ⟨pastel-00677109⟩
  • Laetitia Petroni. Étude du comportement post-coulée de réfractaires électrofondus à Très Haute Teneure en Zircone (THTZ). Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0046⟩. ⟨pastel-00657812⟩
  • Josserand Bassery. Prise en compte du vieillissement et de la fatigue dans le dimensionnement de structures en matériaux composites. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0014⟩. ⟨pastel-00609158⟩
  • Julie Lorthios. Endommagement des aciers TWIP pour application automobile. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0085⟩. ⟨pastel-00689791⟩
  • Jianqiang Chen. Ductile tearing of AA2198 aluminum-lithium sheets for aeronautic application. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0040⟩. ⟨pastel-00657028⟩
  • Abderrahmen Kaabi. Substrat architecturé et brasure composite sans plomb pour l'électronique de puissance des véhicules électriques ou hybrides : conception et procédés. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0024⟩. ⟨pastel-00626665⟩
  • Vladislav Yastrebov. Computational contact mechanics: geometry, detection and numerical techniques. Materials. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0043⟩. ⟨pastel-00657305⟩
  • Delphine Reche. Relations between microstructure and bendability on TRIP-aided steels for automotive products. Engineering Sciences [physics]. École Nationale Supérieure des Mines de Paris, 2011. English. ⟨NNT : 2011ENMP0016⟩. ⟨pastel-00973376⟩
  • Florence Vincent. Du modèle matériau à la mécanique des systèmes : étude dynamique d'une liaison souple en silicone chargé de silice. Matériaux. École Nationale Supérieure des Mines de Paris, 2011. Français. ⟨NNT : 2011ENMP0005⟩. ⟨pastel-00584332⟩
  • Marc Grieu. Étude de la fatigue des joints brasés de composants électroniques soumis à des sollicitations thermomécaniques, vibratoires et combinées. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0068⟩. ⟨pastel-00598315⟩
  • Nicolas Revuz. Étude de l'endommagement d'un superalliage monocristallin à base de nickel induit par microperçage laser milliseconde. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0047⟩. ⟨pastel-00589345⟩
  • Arnaud Longuet. Modélisation du procédé de projection laser : Application au Ti-6Al-4V. Sciences de l'ingénieur [physics]. école nationale supérieure des mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0080⟩. ⟨tel-03767643⟩
  • Vincent Jauzein. Étude de la microstructure et du comportement mécanique de la fibre de soie. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0034⟩. ⟨pastel-00540941⟩
  • Sylvia Feld-Payet. Amorçage et propagation de fissures dans les milieux ductiles non locaux. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0035⟩. ⟨pastel-00583011⟩
  • Marion Geuffrard. Amorçage et micro-propagation de fissure en fatigue à haute température à partir de défauts dans un superalliage monocristallin. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0067⟩. ⟨pastel-00609109⟩
  • Clara Panait. Évolution métallurgique et résistance en fluage à 600°C et 650°C d'aciers à 9-12% Cr. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0024⟩. ⟨pastel-00579983⟩
  • Gilles Rolland. Élaboration et étude de l'endommagement de dépôts composites obtenus par projection dynamique par gaz froid ("cold spray") : application aux contacts électriques. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0015⟩. ⟨pastel-00584319⟩
  • Guillaume Huchet. Propriétés thermomécaniques de cermets à base de ferrite spinelle : influence de l'oxydation. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP1701⟩. ⟨tel-00489811⟩
  • Ozgur Aslan. Numerical modeling of fatigue crack growth in single crystal nickel based superalloys. Materials. École Nationale Supérieure des Mines de Paris, 2010. English. ⟨NNT : 2010ENMP0007⟩. ⟨pastel-00540893⟩
  • Marion Chieux. Vieillissement des systèmes barrière thermique : transformation de phases, oxydation et effet du soufre sur l'adhérence. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP1695⟩. ⟨pastel-00997369⟩
  • Can Ngon Nguyen. Modélisation du comportement en plasticité et à rupture des aciers bainitiques irradiés. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : ⟩. ⟨tel-00469582⟩
  • Serge Guetta. Influence des conditions d'impact sur l'adhérence de cuivre projeté dynamiquement sur de l'aluminium. Matériaux. École Nationale Supérieure des Mines de Paris, 2010. Français. ⟨NNT : 2010ENMP0074⟩. ⟨pastel-00657045⟩
  • Melis Arslan. Micromechanical modeling of microtubules. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2010. English. ⟨NNT : 2010ENMP1684⟩. ⟨tel-00472078⟩
  • Kais Ammar. Modelling and simulation of phase transformation-mechanics coupling using a phase field method. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2010. English. ⟨NNT : 2010ENMP0002⟩. ⟨tel-00508677⟩
  • Aurélien Vattre. Durcissement des superalliages monocristallins : des mécanismes physiques à la modélisation continue. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1661⟩. ⟨pastel-00005807⟩
  • Ibrahima Gueye. Résolution de grands systèmes linéaires issus de la méthode des éléments finis sur des calculateurs massivement parallèles. Modélisation et simulation. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1658⟩. ⟨tel-00477653⟩
  • Julien Frachon. Multiscale approach to predict the lifetime of EB-PVD thermal barrier coatings. Materials. École Nationale Supérieure des Mines de Paris, 2009. English. ⟨NNT : 2009ENMP0019⟩. ⟨pastel-00869360⟩
  • Thibault Herbland. Une méthode de correction élastoplastique pour le calcul en fatigue des zones de concentration de contraintes sous chargement cyclique multiaxial non proportionnel. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : ⟩. ⟨tel-00479991⟩
  • Cédric Regrain. Comportement, endommagement et fissuration par fluage du Polyamide 6 : étude expérimentale et modélisation. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : ⟩. ⟨tel-00493717⟩
  • Mélanie Bordignon. Limites d'utilisation des revêtements d'étain en connectique automobile. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1667⟩. ⟨tel-00460544⟩
  • Anaïs Gaubert. Modélisation des effets de l'évolution microstructurale sur le comportement mécanique du superalliage monocristallin AM1. Matériaux. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : ⟩. ⟨pastel-00580004⟩
  • Guillaume Abrivard. A coupled crystal plasticity - phase field formulation to describe microstructural evolution in polycrystalline aggregates during recrystallisation. Materials. École Nationale Supérieure des Mines de Paris, 2009. English. ⟨NNT : ⟩. ⟨pastel-00533060⟩
  • Rémi Costa. Contribution à l'étude et à la mise en forme d'une cellule de pile à combustible à conduction protonique P.C.F.C.. Sciences de l'ingénieur [physics]. école nationale supérieure des mines de Paris, 2009. Français. ⟨NNT : 2009ENMP0024⟩. ⟨tel-03765841⟩
  • Guillaume Boisot. Mécanismes et modélisation mécanique de la déformation, de l'endommagement et de la rupture du PolyAmide 11 pur et renforcé choc. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1635⟩. ⟨tel-00422223⟩
  • Sophie Lubin. Etude des mécanismes de la transformation de phase bainitique dans les aciers bas carbone. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1634⟩. ⟨tel-00422924⟩
  • Tolga Tavsanoglu. Deposition and characterization of single and multilayered boron carbide and boron carbonitride thin films by different sputtering configurations. Engineering Sciences [physics]. École Nationale Supérieure des Mines de Paris, 2009. English. ⟨NNT : 2009ENMP1641⟩. ⟨pastel-00005772⟩
  • Pongsak Nimdum. Dimensionnement en fatigue des structures ferroviaires en composites épais. Matériaux. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : ⟩. ⟨pastel-00522605⟩
  • Florian Vivier. Fluage à 500°C d'un joint soudé d'un acier 9Cr-1Mo modifié. Evolution de la microstructure et comportement mécanique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1619⟩. ⟨tel-00399352⟩
  • Aurélie Jean. Etude d'un élastomère chargé de la nanostucture au macro-comportement. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1601⟩. ⟨pastel-00005215⟩
  • Julien Hafsaoui. Membrane duale de reformage et de filtration pour la production d'hydrogène par réaction de craquage de méthane. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1638⟩. ⟨tel-00425050⟩
  • Pierre Laghoutaris. Corrosion sous contrainte de l'alliage 600 en milieu primaire des réacteurs à eau sous pression : apport à la compréhension des mécanismes. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2009. Français. ⟨NNT : 2009ENMP1617⟩. ⟨tel-00407846⟩
  • Hélène Jousset. Viscoplasticité et microstructures d'un alliage de titane : effets de la température et de la vitesse de sollicitation. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2008. Français. ⟨NNT : 2008ENMP0004⟩. ⟨tel-00428968⟩
  • Julie Maisonneuve. Fabrication directe de pièces aéronautique en TA6V et IN718. Sciences de l'ingénieur [physics]. Ecole Nationale Supérieure des Mines de Paris, 2008. Français. ⟨NNT : 2008ENMP0006⟩. ⟨tel-03173887⟩
  • Stéphanie Nanga-Nyongha. Comportement et transformations martensitiques de deux aciers inoxydables austénitiques : effets de la température, de la vitesse et du chargement. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2008. Français. ⟨NNT : ⟩. ⟨pastel-00577815⟩
  • Matthieu Le Saux. Comportement et rupture de gaines en zircaloy-4 détendu vierges, hydrurées ou irradiées en situation accidentelle de type RIA. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2008. Français. ⟨NNT : 2008ENMP1608⟩. ⟨tel-00395361⟩
  • C Gérard. Mesures de champs et identification de modèles de plasticité cristalline. Mécanique [physics.med-ph]. Université Paris-Nord - Paris XIII, 2008. Français. ⟨NNT : ⟩. ⟨tel-00315792⟩
  • Olivier Amsellem. Simulations 2D et 3D de microstructure d'alumine projetée plasma pour l'étude de ses propriétés mécaniques et électriques. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2008. Français. ⟨NNT : 2008ENMP1550⟩. ⟨tel-00331802⟩
  • Sébastien Joannès. Caractérisation mécanique et outil d'aide au dimensionnement des collages structuraux. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1528⟩. ⟨tel-00288527⟩
  • Alexandre Dalloz. Étude de l'endommagement par la découpe des aciers dual phase pour application automobile. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1502⟩. ⟨tel-00260080⟩
  • Filip Siska. Continuum vs. dislocation dynamics modelling of thin films. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. English. ⟨NNT : 2007ENMP1481⟩. ⟨tel-00204422⟩
  • Myriam Kaminski. Modélisation de l'endommagement en fatigue des superalliages monocristallins pour aubes de turbines en zone de concentration de contrainte. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1504⟩. ⟨tel-00268736⟩
  • Matthieu Mazière. Burst of turboengine disks. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. English. ⟨NNT : 2007ENMP1492⟩. ⟨tel-00230172⟩
  • Fabien Szmytka. Nouveaux modèles de comportement élasto-viscoplastique pour des matériaux métalliques. Application au dimensionnement de structures automobiles.. Sciences de l'ingénieur [physics]. Ecole Polytechnique X, 2007. Français. ⟨NNT : ⟩. ⟨pastel-00004111⟩
  • Céline Lechat. Comportement mécanique de fibres et d'assemblages de fibres en polyester pour câbles d'amarrage de plates-formes offshore. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1529⟩. ⟨tel-00280511⟩
  • Benjamin Fournier. Fatigue-fluage des aciers martensitiques à 9-12%Cr : comportement et endommagement. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1473⟩. ⟨tel-00203753⟩
  • Yannick Robert. Simulation numérique du soudage du TA6V par laser YAG impulsionnel : caractérisation expérimentale et modélisation des aspects thermomécaniques associés à ce procédé. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1467⟩. ⟨pastel-00003117⟩
  • Valérie Lebreton. Étude métallurgique et optimisation de la fabrication d'alliages à base de cuivre coulés en continu : analyse de la ségrégation et des phénomènes de précipitation dans les alliages CuNi15Sn8, CuNi6Si1.8Cr, CuTi3Al2 et CuTi3Sn2.75. Matériaux. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1539⟩. ⟨pastel-00667453⟩
  • Mélissa Delqué. Influence de la microstructure sur le comportement tribologique de dépôts composites projetés plasma. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : ⟩. ⟨tel-00266009⟩
  • Yann Duplessis Kergomard. Étude expérimentale et numérique de la fissuration intralaminaire et de l'initiation du délaminage de bord libre dans les structures stratifiées pseudo-tissées. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : 2007ENMP1508⟩. ⟨pastel-00003369⟩
  • Anne-Sophie Bilat. Estimation du risque de rupture fragile de soudures de pipelines en aciers à haut grade : caractérisation et modélisation. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : ⟩. ⟨tel-00186517⟩
  • Olivier Mario. Etude du vieillissement des assemblages structuraux acier/aluminium : influence de l'environnement sur le dimensionnement. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2007. Français. ⟨NNT : ⟩. ⟨tel-00273203⟩
  • Kamel Madi. Influence de la morphologie tridimensionnelle des phases sur le comportement mécanique de réfractaires électrofondus. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00147059⟩
  • Christophe Le Clerc. Mécanismes microstructuraux impliqués dans la fatigue des fibres thermoplastiques. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00164759⟩
  • Thanh Trung Luu. Déchirure ductile des aciers à haute résistance pour gazoducs (X100). Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00142118⟩
  • Julien Mercier. Prise en compte du vieillissement et de l'endommagement dans le dimensionnement de structures en matériaux composites. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00156986⟩
  • Norbert Germain. Modélisation non locale de l'endommagement dans les structures composites. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00271225⟩
  • Jean-Luc Bouvard. Modélisation de la propagation de fissure dans les aubes de turbines monocristallines. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00271245⟩
  • Stéphanie Graff. Viscoplastic behavior of zirconium alloys in the temperatures range 20°C-400°C : characterization and modeling of strain ageing phenomena. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. English. ⟨NNT : ⟩. ⟨tel-00180646⟩
  • Nicolas Marchal. Propagation de fissure en fatigue-fluage à haute température de superalliages monocristallins à base de nickel. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00137123⟩
  • Thomas Dick. Modélisation multiéchelle du phénomène de fretting dans le contact aube-disque. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. English. ⟨NNT : ⟩. ⟨tel-00136828⟩
  • Amine Bennani. Elaboration, comportement et durée de vie en fatigue du caoutchouc naturel renforcé de silice. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : 2006ENMP1403⟩. ⟨tel-00136825⟩
  • Nathalie Chérault. Caractérisation et modélisation thermomécanique des couches d'interconnexions dans les circuits sub-microélectroniques. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2006. Français. ⟨NNT : ⟩. ⟨tel-00136807⟩
  • Asmahana Zeghadi. Effet de la morphologie tri-dimensionnelle et de la taille de grain sur le comportement mécanique d'agrégats polycristallins. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. English. ⟨NNT : ⟩. ⟨tel-00159498⟩
  • Paul-André Meury. Alliages métalliques pour l'étalon de masse de la balance du watt et des références secondaires. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : 2005ENMP1320⟩. ⟨tel-00159327⟩
  • Ludovic Massard. Etude du fluage de réfractaires électrofondus du système alumine-zircone-silice. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00150692⟩
  • Florian Cacho. Etude et simulation de la siliciuration du nickel : application dans les technologies MOS. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00159435⟩
  • Chainarong Srikunwong. Modélisation du procédé de soudage par points. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00151464⟩
  • Michel Ly. Étude des fils électrodes pour l'usinage par étincelage érosif. Matériaux. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : 2005ENMP1350⟩. ⟨pastel-00705214⟩
  • Mihai Radu. Relations entre la microstructure et le comportement mécanique des aciers TRIP pour application automobile. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00159425⟩
  • Alexandre Bonhomme. Comportement à l'usure de pastilles de contacts électriques matrice argent. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00152873⟩
  • Bénédicte Bonnet. Comportement au choc de matériaux composites pour applications automobiles. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00152868⟩
  • Sébastien Blassiau. Modélisation des phénomènes microstructuraux au sein d'un composite unidirectionnel carbone/epoxy et prédiction de durée de vie : contrôle et qualification de réservoirs bobinés. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00159405⟩
  • Andrei Musienko. Plasticité cristalline en présence de grandes déformations et d'endommagement. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. English. ⟨NNT : ⟩. ⟨tel-00159409⟩
  • Sylvain Popineau. Durabilité en milieu humide d'assemblages structuraux collés type aluminium/composite. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : ⟩. ⟨tel-00159392⟩
  • Alexandra Asserin-Lebert. Etude expérimentale et prévision des mécanismes de rupture des tôles et des joints soudés bout à bout en alliage d'aluminium 6056. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2005. Français. ⟨NNT : 2005ENMP1293⟩. ⟨tel-00159449⟩
  • Laurent Bucher. Etude de l'endommagement en fatigue thermique des aciers inoxydables F17TNb et R20-12 pour application automobile. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00163013⟩
  • Mélanie Lafarge. Modélisation couplée comportement-endommagement et critères de rupture dans le domaine de la transition du PVDF. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00162997⟩
  • Vincent Gaffard. Experimental study and modelling of high temperature creep flow and damage behaviour of 9Cr1Mo-NbV. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. English. ⟨NNT : 2004ENMP1269⟩. ⟨tel-00162118⟩
  • Djillali Kaddour. Fluage isotherme et anisotherme dans les domaines monophasés (α et β) et biphasé (α + β) d'un alliage Zr-1%NbO. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00162151⟩
  • Sophie Barradas. Etude, à l'aide du choc laser, des mécanismes d'adhérence aux interfaces cuivre/aluminium et cuivre/cuivre obtenues par projection thermique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00273506⟩
  • Arnaud Grosjean. Etude et réalisation par coulage en bande et co-frittage de cellules de pile à combustible à oxydes solides. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00161495⟩
  • José-Martin Herrera-Ramirez. Les mécanismes de fatigue dans les fibres thermoplastiques. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00161491⟩
  • Franck Alexandre. Aspects probabilistes et microstructuraux de l'amorçage des fissures de fatigue dans l'alliage Inco 718. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00161472⟩
  • Thierry Dillard. Caractérisation et simulation numérique du comportement mécanique des mousses de nickel : morphologie tridimensionnelle, réponse élastoplastique et rupture. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00007530⟩
  • Virginie Goussery-Vafiadès. Caractérisations microstructurale et mécanique de mousses de nickel à cellules ouvertes pour batteries de véhicules hybrides. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00007551⟩
  • Bruno Barlas. Etude du comportement et de l'endommagement en fatigue d'alliages d'aluminium de fonderie. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00162056⟩
  • Quentin Auzoux. Fissuration en relaxation des aciers inoxydables austénitiques - Influence de l'écrouissage sur l'endommagement intergranulaire. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00273520⟩
  • Frédéric Bron. Déchirure ductile des tôles minces en alliage d'aluminium 2024 pour application aéronautique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2004. Français. ⟨NNT : ⟩. ⟨tel-00161432⟩
  • Moulay Rachid Kabiri. Fissuration des aciers à haute température : effet de la géométrie sur la transférabilité des lois de propagation. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00005742⟩
  • Sophie Dubiez-Le Goff. Comportement et endommagement d'un superalliage élaboré par compression isostatique à chaud. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : 2003ENMP1352⟩. ⟨pastel-00001863⟩
  • Alba Marcellan. Microstructures, micromécanismes et comportement à rupture de fibres PA 66. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00353844⟩
  • Christian Colin. Etude du fluage du dioxyde d'uranium : caractérisation par essais de flexion et modélisation mécanique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00005741⟩
  • Sébastien Beauvais. Etude de l'influence de la porosité sur les propriétés électriques de dépôts réalisés par projection plasma. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00006592⟩
  • Toufik Kanit. Notion of representative volume element for heterogeneous materials: statistical and numerical approach. Mechanics [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. English. ⟨NNT : ⟩. ⟨tel-00005751⟩
  • Nader Haddar. Fatigue thermique d'un acier inoxydable austénitique 304L : simulation de l'amorçage et de la croissance des fissures courtes en fatigue isotherme et anisotherme. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00005750⟩
  • Jean-Sébastien Blazy. Comportement mécanique des mousses d'aluminium : caractérisations expérimentales sous sollicitations complexes et simulations numériques dans le cadre de l'élasto-plasticité compressible. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : ⟩. ⟨tel-00005740⟩
  • Gwénaël Lemarchand. Caractérisation mécanique et simulation numérique d'une anode tournante de rayons X. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2003. Français. ⟨NNT : 2003ENMP1176⟩. ⟨pastel-00000467⟩
  • Xavier Lefebvre. Fissuration fragile lente du polyamide 11 : mécanismes et durées de vie en fluage. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005717⟩
  • Catherine Guerre. Etude des mécanismes d'endommagement d'un système barrière thermique déposé sur un superalliage base nickel. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨pastel-00936161⟩
  • Frédérique Coeuille. Revêtements polymères de canalisation de fluide : caractérisation et évolution de l'adhesion en milieu agressif. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005687⟩
  • Stéphane Hertz-Clemens. Etude d'un composite aéronautique à matrice métallique sous chargements de fatigue : sollicitation mécano-thermique et propagation de fissures. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005688⟩
  • Angeline Poulon-Quintin. Comportement mécanique et microstructure de filaments céramiques alumine-zircone pour applications à haute température. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005694⟩
  • Antoine Guiu. Assemblages multicouches de polymères semi-cristallins : adhésion et vieillissement. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005636⟩
  • Caroline Margueritat-Regenet. Elaboration et caractérisation de fils composites C/Al : infiltration spontanée et continue par activation chimique du mouillage. Matériaux. École Nationale Supérieure des Mines de Paris, 2002. Français. ⟨NNT : ⟩. ⟨tel-00005642⟩
  • Virginie Calonne. Propagation de fissure par fatigue dans les aciers austeno-ferritiques moulés : influence de la microstructure, du vieillissement et de la température d'essai. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2001. Français. ⟨NNT : ⟩. ⟨tel-00005649⟩
  • Benoit Tanguy. Modélisation de l'essai charpy par l'approche locale de la rupture : application au cas de l'acier 16MND5 dans le domaine de transition. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2001. Français. ⟨NNT : ⟩. ⟨tel-00005651⟩
  • Astrid Lambert-Perlade. Rupture par clivage de microstructures d'aciers bainitiques obtenues en conditions de soudage. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2001. Français. ⟨NNT : ⟩. ⟨tel-00005749⟩
  • Jean-Samuel Wienin. Anisotropic Elastoplastic behaviour of sheet metal designed for stamping. Influence of broad compression test on identification. Mechanics of materials [physics.class-ph]. école nationale supérieure des mines de Paris, 2001. English. ⟨NNT : 2001ENMP1087⟩. ⟨tel-04069036⟩
  • Nicolas Saintier. Fatigue multiaxiale dans un élastomère de type NR chargé: mécanismes d'endommagement et critère local d'amorçage de fissure. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2001. Français. ⟨NNT : ⟩. ⟨tel-00397910⟩
  • Fabrice Barbe. Etude numérique de la plasticité d'agrégats polycristallins. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005640⟩
  • Jean-Marc Cardona. Comportement et durée de vie des pièces multiperforées : application aux aubes de turbine. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005643⟩
  • Xavier Buch. Dégradation thermique et fluage d'un adhésif structural epoxyde. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005634⟩
  • Sandrine Tarral-Basle. Réparation et rechargement par brasage-diffusion des alliages intermétalliques gamma TiAl au moyen de mélanges de poudres TiAl/TiCuNi : aspect microstructural et mécanique des assemblages. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005686⟩
  • Stéphane Bugat. Comportement et endommagement des aciers austeno-ferritiques vieillis : une approche micromécanique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005650⟩
  • Marc Greiveldinger. Mécanismes d'adhésion sur tôles grasses et tenue mécanique en milieu humide. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-00005635⟩
  • Agathe Robisson. Comportement visco-hyperélastique endommageable d'élastomères SBR et PU : prévision de la durée de vie en fatigue. Mécanique des matériaux [physics.class-ph]. Ecole des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨tel-01727666⟩
  • Frédéric Sansoz. Propagation des petites fissures de fatigue dans les zones de concentration de contraintes dans le superalliage N18. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 2000. Français. ⟨NNT : ⟩. ⟨pastel-00000970⟩
  • Philippe Geyer. Comportement élasto-viscoplastique de tubes en Zircaloy 4 : approche expérimentale et modélisation micromécanique. Matériaux. École Nationale Supérieure des Mines de Paris, 1999. Français. ⟨NNT : ⟩. ⟨pastel-00933408⟩
  • Anny Murad-Bickard. Endommagement sous sollicitations thermiques et mécaniques d'un aluminiure de nickel et d'une barrière thermique déposés sur un superalliage monocristallin. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 1998. Français. ⟨NNT : ⟩. ⟨tel-00311996⟩
  • Marjolaine Grange. Fragilisation du Zircaloy-4 par l'hydrogène : comportement, mécanismes d'endommagement, interaction avec la couche d'oxyde, simulation numérique. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 1998. Français. ⟨NNT : ⟩. ⟨tel-00005648⟩
  • Fabienne Poulard. Adhésion du polyamide 11 : mécanismes et vieillissement hygrothermal. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 1998. Français. ⟨NNT : ⟩. ⟨tel-00005639⟩
  • Alain Köster. Fatigue thermique d'un alliage pour aubes de turbopompe astronautique : le Superwaspaloy. Matériaux. École Nationale Supérieure des Mines de Paris, 1997. Français. ⟨NNT : ⟩. ⟨pastel-00521854⟩
  • Anne-Françoise Gourgues-Lorenzon. Interactions mécanique-oxydation à haute température dans l'alliage 600 : application à la fissuration dans le milieu primaire des réacteurs nucléaires à eau sous pression. Matériaux. École Nationale Supérieure des Mines de Paris, 1997. Français. ⟨NNT : 1997ENMP0788⟩. ⟨pastel-00737015⟩
  • Angelo Germidis. Comportement thermomécanique de structures alvéolaires pour pots catalytiques. Mécanique [physics.med-ph]. École Nationale Supérieure des Mines de Paris, 1996. Français. ⟨NNT : ⟩. ⟨tel-00261892⟩
  • Philippe Bastid. Comportement thermomécanique de fontes à graphite sphéroïdal pour collecteurs d'échappement. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1995. Français. ⟨NNT : 1995ENMP1520⟩. ⟨pastel-00003288⟩
  • Emmanuelle Munier. Identification expérimentale et modélisation statistique multi-échelle du comportement mécanique de composites SiC/SiC tissés. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1994. Français. ⟨NNT : ⟩. ⟨pastel-00002421⟩
  • Kacem Sai. Modèles à grand nombre de variables internes et méthodes numériques associées. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1993. Français. ⟨NNT : ⟩. ⟨pastel-00001728⟩
  • Fabienne Hanriot. Comportement du superalliage monocristallin AM1 sous sollicitations cycliques. Matériaux. École Nationale Supérieure des Mines de Paris, 1993. Français. ⟨NNT : ⟩. ⟨pastel-00001531⟩
  • Pierre Joly. Etude de la rupture d'aciers inoxydables austéno-ferritiques moulés, fragilisés par vieillissement à 400°C. Matériaux. École Nationale Supérieure des Mines de Paris, 1992. Français. ⟨NNT : ⟩. ⟨pastel-00915898⟩
  • Jacques Besson. Simulation numérique de la mise en forme des céramiques : application à la compaction isostatique à chaud. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1990. Français. ⟨NNT : 1990ENMP0193⟩. ⟨pastel-00002329⟩
  • Danièle Ayrault. Fluage à haute température de superalliages base nickel monocristallins. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1989. Français. ⟨NNT : 1989ENMP0201⟩. ⟨pastel-00002126⟩
  • Éric Andrieu. Influence de l'environnement sur la propagation des fissures dans un superalliage base nickel : l'inconel 718. Sciences de l'ingénieur [physics]. École Nationale Supérieure des Mines de Paris, 1987. Français. ⟨NNT : 1987ENMP002⟩. ⟨pastel-00001862⟩
  • Allan Fredholm. Monocristaux d'alliages base nickel : relation entre composition, microstructure et comportement en fluage à haute température. Matériaux. École Nationale Supérieure des Mines de Paris, 1987. Français. ⟨NNT : 1987ENMP0020⟩. ⟨pastel-00002328⟩
  • Marie-Hélène Lafitte. Caractérisation de la fibre aramide Kevlar 29r : étude du comportement et des propriétés mécaniques en tension et en torsion. Matériaux. École Nationale Supérieure des Mines de Paris, 1981. Français. ⟨NNT : ⟩. ⟨pastel-00555564⟩

Habilitations à diriger des recherches

  • Sébastien Joannès. Comportement et durabilité des composites à renforts fibreux et matrices organiques : Mieux comprendre pour mieux prédire. Mécanique des matériaux [physics.class-ph]. Université de Poitiers, 2022. ⟨tel-03726556⟩
  • V A Yastrebov. Mechanics and Physics of Contact Interfaces. Solid mechanics [physics.class-ph]. Sorbonne Université, 2021. ⟨tel-03767709⟩
  • François Willot. Localization in random media and its effect on the homogenized behavior of materials. Materials. Université Paris Sorbonne, 2019. ⟨tel-02412623⟩
  • Yazid Madi. Endommagement et rupture des aciers : de la mini-éprouvette à la structure. Mécanique des matériaux [physics.class-ph]. Université Paris 13 - Sorbonne Paris Cité, 2019. ⟨tel-02441798⟩
  • Vincent Guipont. Microstructures et interfaces céramique/métal obtenues par dépôt physique : vers une conception architecturée des systèmes revêtus multi-matériaux. Contribution au contrôle des propriétés des dépôts épais à base de céramique. Science des matériaux [cond-mat.mtrl-sci]. Université de Limoges, France, 2013. ⟨tel-01393886⟩
  • Marie-Hélène Berger. A la recherche de la fibre céramique idéale. : Évolution microstructurale et comportement local: l'indispensable lien entre procédé de fabrication et propriétés macroscopiques. Matériaux. Université Pierre & Marie Curie - Paris 6, 2011. ⟨tel-01469319⟩
  • Anne-Françoise Gourgues-Lorenzon. Relations entre microstructure, microtexture de transformations de phases et propriétés mécaniques d'alliages métalliques. Matériaux. Institut National Polytechnique de Lorraine (INPL), 2007. ⟨tel-03661990⟩