Les dernières publications scientifiques

+ de publications


Andrei Shvarts, Vladislav Yastrebov. Trapped fluid in contact interface Journal of the Mechanics and Physics of Solids, Elsevier, 2018, 119, pp.140-162. 〈10.1016/j.jmps.2018.06.016〉

Hyung-Jun Chang, Fivel Marc, Jean-Loup Strudel. Micromechanics of primary creep in Ni base superalloys International Journal of Plasticity, Elsevier, 2018, 108, pp.21-39. 〈10.1016/j.ijplas.2018.04.009〉

Babak Kondori, Thilo Morgeneyer, Lukas Helfen, A. Amine Benzerga. Void growth and coalescence in a magnesium alloy studied by synchrotron radiation laminography Acta Materialia, Elsevier, 2018, 155, pp.80-94. 〈10.1016/j.actamat.2018.05.026〉

François Ebobisse, Patrizio Neff, Samuel Forest. Well-posedness for the microcurl model in both single and polycrystal gradient plasticity International Journal of Plasticity, Elsevier, 2018, 107, pp.1-26. 〈10.1016/j.ijplas.2017.01.006〉

Alexandre Royer, Thierry Barriere, Yves Bienvenu. Influence of supercritical debinding and processing parameters on final properties of injection-moulded Inconel 718 Powder Technology, Elsevier, 2018, 336, pp.311-317. 〈10.1016/j.powtec.2018.05.047〉

Anthony R. Bunsell, Larissa Gorbatikh, Hannah Morton, Soraia Pimenta, Ian Sinclair, Mark Spearing, Yentl Swolfs, Alain Thionnet. Benchmarking of strength models for unidirectional composites under longitudinal tension Composites Part A: Applied Science and Manufacturing, Elsevier, 2018, 111, pp.138-150. 〈10.1016/j.compositesa.2018.03.016〉

Vincent Bortolussi, Bruno Figliuzzi, François Willot, Matthieu Faessel, Michel Jeandin. Morphological modeling of cold spray coatings Image Analysis and Stereology, International Society for Stereology, 2018, 37 (2), pp.145-158. 〈10.5566/ias.1894〉

Jules Fauque, Isabelle Ramiere, David Ryckelynck. Hybrid hyper-reduced modeling for contact mechanics problems International Journal for Numerical Methods in Engineering, Wiley, 2018, 115 (1), pp.117-139. 〈10.1002/nme.5798〉

Minghao Zhang, Anne-Françoise Gourgues-Lorenzon, Esteban P. Busso, Haiwen Luo, Mingxin Huang. Recrystallisation-assisted creep of an austenitic Fe-Ni alloy under low stresses after hot deformation Acta Materialia, Elsevier, 2018, 153, pp.23-34. 〈10.1016/j.actamat.2018.04.050〉

Andrei Shvarts, Vladislav Yastrebov. Fluid flow across a wavy channel brought in contact Tribology International, Elsevier, 2018, 126, pp.116-126. 〈https://www.sciencedirect.com/science/article/pii/S0301679X18302330〉. 〈10.1016/j.triboint.2018.05.005〉

Michel Jeandin. Cold spray under the banner of thermal spray in the whirlwind of additive manufacturing Surface Engineering, Maney Publishing, 2018, 34 (5), pp.341-343. 〈10.1080/02670844.2017.1300429〉

Ante Buljac, Victor-Manuel Trejo-Navas, Modesar Shakoor, Amine Bouterf, Jan Neggers, Marc Bernacki, Pierre-Olivier Bouchard, Thilo Morgeneyer, François Hild. On the calibration of elastoplastic parameters at the microscale via X-ray microtomography and digital volume correlation for the simulation of ductile damage European Journal of Mechanics - A/Solids, Elsevier, 2018, 72, pp.287-297. 〈10.1016/j.euromechsol.2018.04.010〉

Martinus P. Widjaja, Sébastien Joannès, Anthony Bunsell, Georg Mair, Alain Thionnet. The application of a reduced volume method for the simulation of the characterisation of a carbon fibre pressure vessel ECCM 18 - 18th european conference on composite materials, Jun 2018, Athenes, Greece. 2018

Denis Jalabert, Hicham Zaid, Marie-Hélène Berger, I. Fongkaew, W.R.L. Lambrecht, A. Sehirlioglu. Ion blocking dip shape analysis around a LaAlO 3 /SrTiO 3 interface Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, Elsevier, 2018, 423, pp.67-71. 〈10.1016/j.nimb.2018.03.010〉

Andrea Rovinelli, Michael Sangid, Henry Proudhon, Yoann Guilhem, Ricardo A. Lebensohn, Wolfgang Ludwig. Predicting the 3D fatigue crack growth rate of short cracks using multimodal data via Bayesian network: in-situ experiments and crystal plasticity simulations Journal of the Mechanics and Physics of Solids, Elsevier, 2018, 115, pp.208-229. 〈http://www.sciencedirect.com/science/article/pii/S0022509617310839〉. 〈10.1016/j.jmps.2018.03.007〉

Clément Defaisse, Matthieu Mazière, L. Marcin, J. Besson. Ductile fracture of an ultra-high strength steel under low to moderate stress triaxiality Engineering Fracture Mechanics, Elsevier, 2018, 194, pp.301-318. 〈10.1016/j.engfracmech.2017.12.035〉

Pauline Girardon, Sébastien Tahon, Jean-Michel Damasse, Marie-Hélène Berger, Hughes Cornil, Olivier Henrotte, Alain Pimard. Metal strip, bipolar plate and associated manufacturing method United States, Patent n° : US20180112304. 2018

Yoann Guilhem, Stéphanie Basseville, François Curtit, Jean-Michel Stéphan, Georges Cailletaud. Numerical analysis on the effect of surface roughness on the mechanical fields in polycrystalline aggregates Modelling and Simulation in Materials Science and Engineering, IOP Publishing, 2018, 26 (4), 045004, 19 p. 〈http://stacks.iop.org/0965-0393/26/i=4/a=045004〉. 〈10.1088/1361-651X/aab217〉

Liliana Moniz, Christophe Colin, Jean-Dominique Bartout, Karim Terki, Marie-Hélène Berger. Laser beam melting of alumina : effect of absorber additions JOM Journal of the Minerals, Metals and Materials Society, Springer Verlag (Germany), 2018, 70 (3), pp.328-335. 〈10.1007/s11837-017-2716-9〉

Chao Ling, Samuel Forest, Jacques Besson, Benoit Tanguy, Felix Latourte. A reduced micromorphic single crystal plasticity model at finite deformations. Application to strain localization and void growth in ductile metals International Journal of Solids and Structures, Elsevier, 2018, 134, pp.43-69. 〈10.1016/j.ijsolstr.2017.10.013〉

Les dernières publications scientifiques - MINES ParisTech
Plan du site
Mentions légales efil.fr © 2014 MINES ParisTech